Re: Can't get sound to work!
Ok, I got sound working. On my windows boot the sound was on IRQ 5, it kept trying to put it on IRQ 7 in linux. I added a /etc/modutils/sound file and put
options sb irq=5 io=0x220 dma=1
in it, but when I rebooted it seemed to ignore that file. So instead I edited /etc/modules. It had a single line in it that said:
sb
So I change it to read:
sb irq=5 io=0x220 dma=1
That worked. What is confusing me now, is that when I shut down, during my shutdown messages I get a message that the alsa driver isn't running. This is correct, it shouldn't be. But I can't
figure out why my machine is trying to shut it down. I checked in rcS.d and my rc5.d directories (I'm running in mode 5) but I can't figure out where my machine is trying start/shutdown the alsa
drivers. Also, during my boot sequence my machine scans for SCSI interfaces. I don't have any scsi interfaces so how can I stop it from doing this scan everytime I boot?
BTW, apt-get rocks. Now I know why people who use debian never go to anything else. I'm addicted :)
Kent West wrote:
> Rev. Ferret wrote:
>
> > Ok, I added myself to user audio and I now get sound from things. There is just one problem. The sound skips. It sounds like a broken record player, where it plays the same bit over and over
> > again. I tried chmod'ing the audio things to world usable, but it didn't help. Any ideas on how to get it to stop skipping? At least I'm getting some sound now :)
> >
>
> Probably one of two things:
> (1) wrong sound driver or problems with the driver
> (2) IRQ or IOPort conflict
>
> If this is an ISA card, it's probably the second. Do you have a
> dual-boot with Win9x? If so, what IRQ/io does it report the card being
> on? Does this match what Linux thinks? Or maybe it's a jumper-configured
> card, in which case, make sure Linux sees the same settings that the
> card is actually on. If Linux doesn't match the actual settings, you can
> feed the settings to the module when it installs. For example, I have a
> file "/etc/modutils/sound" which has the two lines:
> options uart401 irq=9 io=0x330
> options sb irq=5 io=0x220 dma=1
>
> hth, Kent
Reply to: