Re: XFree86 + NV_GLX
I don't mind most of the logic of this, but I must say the following:
(1) I dont use "NVdriver" in X, I use "nvidia" instead of "nv".
(2) Removing the libGLcore.a causes the GLcore module to not load, and the
only way to fix this is to reinstall xserver-xfree86. This does cause some
undefined symbols in my X load, but not ones which stop the server from
loading and functioning [seemingly] ok.
(3) Removing all trace of MESA is causing fun, because packages depend on
mesag3, and it seems that any update of these overwrites the NV-installed
GLX.
Am I off the beaten track?
Cheers,
Corey J. Popelier
http://members.dingoblue.net.au/~pancreas
On Sat, 25 Nov 2000, Brandt Dusthimer wrote:
> Okay, if you've read any of my older postings, you'll realise that
> installing the GLX drivers is a snap (if you know what your doing).
> First, go to NVidia's web and download the GLX and NVidia Drivers. From
> the main screen, click on products, then drivers, then linux. That should
> get you to them.
> After you've downloaded them, put them both into your /usr/src
> directory. Then tar -xzvf NV(driver name) and then tar -xzvf NV(GLX).
> Go into the newly made NV(driver name) directory and type "make". "cd
> .." and then go into the GLX directory. Type "make" again.
> Okay, here's where things got a little bit tricky for me. First, type
> "dexter" and setup your config (if the "nvidia" driver isn't listed, just
> use the "nv" driver for now.) MAKE SURE YOU LOOK AT WHAT DEXTER WRITES THE
> CONFIG SCRIPT TO!!! I spent who knows how long "debugging" my box's X
> config file (/etc/X11/XF86Config) only to find out later that dexter had
> changed it to /etc/X11/XF86Config-4. I set it everything right. I was just
> using the wrong config file.
> Next, check out your /etc/modules.conf file. Make sure it says
> something in there about "alias char-major-195 NVdriver" or something like
> that. If it isn't there then go into the directory
> /lib/modules/your-kernel-version/video (or do a "locate NVdriver" to tell
> you where it is other than in the /usr/src/NVdriver directory.) After you
> get there "mv NVdriver NVdriver.o". Then do a "modconf". Go into video and
> select the NVdriver module. It should install just fine.
> After doing that (*gasp* *gasp* *breathe* . . . quick rest ... ok, I'm
> back) then edit whichever config file dexter wrote to. If you use vi, open
> in up and type "/". Then type "nv" and press return. It should find you
> where in the script it sets which driver to use. (The nv should be in
> parentheses.) Replace "nv" with "nvdriver".
> Now, if your not already in X, do a "startx". If you are in X, reset it
> (Ctrl-Alt-Backspace.) Hopefully it should run just fine. If it doesn't ...
> just tell me, I should be able to help.
> Play Quake. Have fun? Does it run slow? If it does, you still have
> some mesa drivers lying around. Do the following commands :
>
> rm /usr/X11R6/lib/modules/extensions/libGLcore.a
> rm /usr/X11R6/lib/modules/extensions/libglx.a
> rm /usr/lib/libGL.so
> rm /usr/X11R6/lib/libGL.so*
> rm /usr/X11R6/lib/libGLcore.so*
>
> Then, go back into /usr/src/NV(GLX) and type make. Reset X and it
> should work fine.
>
> Enjoy Quake :),
>
> Brandt Dusthimer
>
>
> ----- Original Message -----
> From: Daniel Wagner <e9925791@student.tuwien.ac.at>
> To: <debian-user@lists.debian.org>
> Sent: Saturday, November 25, 2000 6:51 AM
> Subject: XFree86 + NV_GLX
>
>
> > Hello,
> >
> > I've a TNT2-Ultra graphicscard and it works fine with the standard nv
> driver of
> > the xfree 4 package, but is there a package where the accelerated driver
> is
> > included (that means, mesalibs, xfree-driver, kernel-module)?
> >
> > thanks for any advice,
> > Daniel Wagner
> >
> > --
> > @gpg: http://stud3.tuwien.ac.at/~e9925791/daniel_wagner.asc
> > C63A 06F0 3E2A A039 E830 83A0 C1DA 3479 803F 078F
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> >
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: