[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#133200: tetex-bin: Please add these items to /etc/texmf/texmf.cnf for ASCII pTeX



From: Atsuhito Kohda <kohda@pm.tokushima-u.ac.jp>
Subject: Bug#133200: tetex-bin: Please add these items to  /etc/texmf/texmf.cnf for ASCII pTeX
Date: Tue, 12 Feb 2002 10:05:06 +0900

> > Is it possible to add the following items to /etc/texmf/texmf.cnf? 
> 
> I think this is only a temporary solution and I guess
> that tetex should provide a mechanism so that any TeX
> related package could add appropriate settings to texmf.cnf
> 
> It might be the best if we could generate texmf.cnf
> from auxiliary files (like update-vfontcap?), I guess.
> 
> I think this is a very serious problem of teTeX so please
> show us any idea you have.

Hi all,

it seems no one would propose any concrete idea, I tried 
rough sketch borrowed from update-vfontcap.

It is true that these are very naive so please anyone refine
them.  

Bsic idea is to separate the original texmf.cnf into several
parts in /etc/texmf/texmf.d/ and to cat them with update-texmf 
script.  So any TeX related package, for example ptex-bin, can 
add appropriate settings to the generated texmf.cnf if ptex-bin
provides /etc/texmf/texmf.d/20ptex with the appropriate settings.

Further, if 20ptex is a real conffile then it will remain after
removing ptex-bin so it might be better that ptex-bin will generate
/etc/texmf/texmf.d/20ptex with its postinst and remove it with
prerm in case remove.

Everyone, please take this issue seriously; if teTeX does not
provide this kind of mechanism, several TeX related packages
will be with RC bug.  (one of them will be my ptex-jtex ;-)

I attached update-texmf and sample separated texmf.cnf's.

# I am testing with the generated texmf.cnf since yesterday
# and it seems to work....

Best regards,		2002.2.24

-- 
 Debian Developer & Debian JP Developer - much more I18N of Debian
 Atsuhito Kohda <kohda@debian.org>
 Department of Math., Tokushima Univ.

#!/bin/sh
# update-texmf
# License: GPL

#CNFFILES=`/bin/ls -1 texmf.d/* | egrep -v "(.dpkg-[a-z]*|~)$"`
#CNFDIR=.
CNFFILES=`/bin/ls -1 /etc/texmf/texmf.d/* | egrep -v "(.dpkg-[a-z]*|~)$"`
CNFDIR=/etc/texmf

if [ "x$1" = "x-v" ]; then
  VERBOSE=true
fi

if [ "$VERBOSE" = "true" ]; then
  if [ -f "$CNFDIR/texmf.cnf" ]; then
    echo -n "Regenerating $CNFDIR/texmf.cnf ... " >&2
  else
    echo -n "Generating $CNFDIR/texmf.cnf ... " >&2
  fi
fi

(echo "%%% This file is automatically generated by update-texmf"; \
echo "%"; \
echo "% Please do not edit this file directly. If you want to change or add"; \
echo "% anything please take a look at the files in /etc/texmf/texmf.d, and"; \
echo "% invoke update-texmf."; \
echo "%"; \
echo "%%%" ) > ${CNFDIR}/texmf.cnf.new

cat ${CNFFILES} >> ${CNFDIR}/texmf.cnf.new
mv ${CNFDIR}/texmf.cnf.new ${CNFDIR}/texmf.cnf

if [ "$VERBOSE" = "true" ]; then
  echo "done"
fi
% original texmf.cnf -- runtime path configuration file for kpathsea.
% (If you change or delete `original' on the previous line, the
% distribution won't install its version over yours.)
% Public domain.
% 
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
% 
% texmf.cnf is generated from texmf.in, by replacing @var@ with the
% value of the Make variable `var', via a sed file texmf.sed, generated
% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in
% by configure).
% 
% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
% The `=' (and surrounding spaces) is optional.
% No % or @ in texmf.in, for the sake of autogeneration.
% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.)
% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
% 
% Earlier entries (in the same or another file) override later ones, and
% an environment variable foo overrides any texmf.cnf definition of foo.
% 
% All definitions are read before anything is expanded, so you can use
% variables before they are defined. 
% 
% If a variable assignment is qualified with `.PROGRAM', it is ignored
% unless the current executable (last filename component of argv[0]) is
% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
% right-hand side. For environment variables, use FOO_PROGRAM.
% 
% Which file formats use which paths for searches is described in the
% various programs' and the kpathsea documentation.
% 
% // means to search subdirectories (recursively).
% A leading !! means to look only in the ls-R db, never on the disk.
% A leading/trailing/doubled ; in the paths will be expanded into the
%   compile-time default. Probably not what you want.
% 
% You can use brace notation, for example: /usr/local/{mytex:othertex}
% expands to /usr/local/mytex:/usr/local/othertex.  Instead of the path
% separator you can use a comma: /usr/local/{mytex,othertex} also expands
% to /usr/local/mytex:/usr/local/othertex.  However, the use of the comma
% instead of the path separator is deprecated.
%
% The text above assumes thet path separator is a colon (:).  Non-UNIX
% systems use different path separators, like the semicolon (;).

%  Part 1: Search paths and directories.

% You can set an environment variable to override TEXMF if you're testing
% a new TeX tree, without changing anything else.
% 
% You may wish to use one of the $SELFAUTO... variables here so TeX will
% find where to look dynamically.  See the manual and the definition
% below of TEXMFCNF.

% The main tree, which must be mentioned in $TEXMF, below:
TEXMFMAIN = /usr/share/texmf

% A place for local additions to a "standard" texmf tree.  For example:
TEXMFLOCAL = /usr/local/lib/texmf

% If defined, teTeX's texconfig stores modifications here (instead of the
% TEXMFMAIN tree).
%   VARTEXMF = /usr/share/texmf-var

% User texmf trees can be catered for like this...
HOMETEXMF = $HOME/texmf

% Now, list all the texmf trees. If you have multiple trees you can
% use shell brace notation, like this:
TEXMF = {$HOMETEXMF,!!$TEXMFLOCAL,!!$TEXMFMAIN}
% The braces are necessary.  If you set VARTEXMF, you also have to
%   - list $VARTEXMF in the TEXMF definition;
%   - make sure that $VARTEXMF precedes $TEXMFMAIN in the TEXMF definition.
% TEXMF = $TEXMFMAIN

% The system trees.  These are the trees that are shared by all the users.
SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN

% Where generated fonts may be written.  This tree is used when the sources
% were found in a system tree and either that tree wasn't writable, or the
% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
VARTEXFONTS = /var/spool/texmf

% Where to look for ls-R files.  There need not be an ls-R in the
% directories in this path, but if there is one, Kpathsea will use it.
%
% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
% one of the TEXMF directories (avoids overlapping ls-R files).
TEXMFDBS = $TEXMF;$VARTEXFONTS

% It may be convenient to define TEXMF like this:
%   TEXMF = {$HOMETEXMF,!!$TEXMFLOCAL,!!$TEXMFMAIN,$HOME}
% which allows users to set up entire texmf trees, and tells TeX to
% look in places like ~/tex and ~/bibtex.  If you do this, define TEXMFDBS
% like this:
%   TEXMFDBS = $HOMETEXMF;$TEXMFLOCAL;$TEXMFMAIN;$VARTEXFONTS
% or mktexlsr will generate an ls-R file for $HOME when called, which is
% rarely desirable.  If you do this you'll want to define SYSTEXMF like
% this:
%   SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN
% so that fonts from a user's tree won't escape into the global trees.
%
% On some systems, there will be a system tree which contains all the font
% files that may be created as well as the formats.  For example
%   VARTEXMF = /var/lib/texmf
% is used on many Linux systems.  In this case, set VARTEXFONTS like this
%   VARTEXFONTS = $VARTEXMF/fonts
% and do not mention it in TEXMFDBS (but _do_ mention VARTEXMF).


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Usually you will not need to edit any of the other variables in part 1. %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% WEB2C is for Web2C specific files.  The current directory may not be
% a good place to look for them.
WEB2C = $TEXMF/web2c

% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
% or \openin, including .sty, .eps, etc. 

% Plain TeX.  Have the command tex check all directories as a last
% resort, we may have plain-compatible stuff anywhere.
TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//

% Other plain-based formats.
TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
TEXINPUTS.eplain  = .;$TEXMF/tex/{eplain,plain,generic,}//
TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//

% LaTeX 2e specific macros are stored in latex/, macros that can only be
% used with 2.09 in latex209/.  In addition, we look in the directory
% latex209, useful for macros that were written for 2.09 and do not
% mention 2e at all, but can be used with 2e.
TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
TEXINPUTS.platex  = .;$TEXMF/tex/{platex,latex,generic,}//
TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//

% Fontinst needs to read afm files.
TEXINPUTS.fontinst = .;$TEXMF/tex//;$TEXMF/fonts/afm//

% MLTeX.
TEXINPUTS.frlatex = .;$TEXMF/{mltex,tex}/{french,latex,generic,}//
TEXINPUTS.frtex   = .;$TEXMF/{mltex,tex}/{french,plain,generic,}//
TEXINPUTS.mllatex = .;$TEXMF/{mltex,tex}/{latex,generic,}//
TEXINPUTS.mltex = .;$TEXMF/{mltex,tex}/{plain,generic,}//

% e-TeX.  This form of the input paths is borrowed from teTeX.  A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.elatex   = .;$TEXMF/{etex,tex}/{latex,generic,}//
TEXINPUTS.etex     = .;$TEXMF/{etex,tex}/{plain,generic,}//

% pdfTeX.  This form of the input paths is borrowed from teTeX.  A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.pdfcslatex = .;$TEXMF/{pdftex,tex}/{cslatex,csplain,latex,generic,}//
TEXINPUTS.pdfcsplain = .;$TEXMF/{pdftex,tex}/{csplain,plain,generic,}//
TEXINPUTS.pdfjadetex = .;$TEXMF/{pdftex,tex}/{jadetex,plain,generic,}//
TEXINPUTS.pdflatex = .;$TEXMF/{pdftex,tex}/{latex,generic,}//
TEXINPUTS.pdfmex   = .;$TEXMF/{pdftex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdftex   = .;$TEXMF/{pdftex,tex}/{plain,generic,}//
TEXINPUTS.pdftexinfo = .;$TEXMF/{pdftex,tex}/{texinfo,plain,generic,}//

% pdfeTeX.
TEXINPUTS.pdfelatex = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{latex,generic,}//
TEXINPUTS.pdfetex   = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{plain,generic,}//

% Omega.
TEXINPUTS.lambda = .;$TEXMF/{omega,tex}/{lambda,latex,generic,}//
TEXINPUTS.omega = .;$TEXMF/{omega,tex}/{plain,generic,}//

% Context macros by Hans Hagen:
TEXINPUTS.context = .;$TEXMF/{pdftex,etex,tex}/{context,plain,generic,}//

% odd formats  needing their own paths
TEXINPUTS.lamstex  = .;$TEXMF/tex/{lamstex,plain,generic,}//
TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
TEXINPUTS.mex-pl = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.platex-pl  = .;$TEXMF/tex/{platex,latex,generic,}//
TEXINPUTS.pdfplatex = .;$TEXMF/{pdftex,tex}/{platex,latex,generic,}//
TEXINPUTS.pdfmex-pl = .;$TEXMF/{pdftex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdfemex   = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{mex,plain,generic,}//
TEXINPUTS.pdfemex-pl = .;$TEXMF/{pdfetex,pdftex,etex,tex}/{mex,plain,generic,

% Earlier entries override later ones, so put this last.
TEXINPUTS = .;$TEXMF/tex/{generic,}//

% Metafont, MetaPost inputs.
MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
MPINPUTS = .;$TEXMF/metapost//

% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL),
% and string pools (.pool) for ini{tex,mf,mp}.  It is silly that we have six
% paths and directories here (they all resolve to a single place by default),
% but historically ...
TEXFORMATS = .;$TEXMF/web2c
MFBASES = .;$TEXMF/web2c
MPMEMS = .;$TEXMF/web2c
TEXPOOL = .;$TEXMF/web2c
MFPOOL = .;$TEXMF/web2c
MPPOOL = .;$TEXMF/web2c

% Device-independent font metric files.
VFFONTS = .;$TEXMF/fonts/vf//
TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//

% The $MAKETEX_MODE below means the drivers will not use a cx font when
% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
% The modeless part guarantees that bitmaps for PostScript fonts are found.
PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//

% Similarly for the GF format, which only remains in existence because
% Metafont outputs it (and MF isn't going to change).
GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//

% A backup for PKFONTS and GFFONTS. Not used for anything.
GLYPHFONTS = .;$TEXMF/fonts

% A place to puth everything that doesn't fit the other font categories.
MISCFONTS = .;$TEXMF/fonts/misc//

% For texfonts.map and included map files used by mktexpk.
% See ftp://ftp.tug.org/tex/fontname.tar.gz.
TEXFONTMAPS = .;$TEXMF/fontname

% BibTeX bibliographies and style files.
BIBINPUTS = .;$TEXMF/bibtex/{bib,}//
BSTINPUTS = .;$TEXMF/bibtex/{bst,}//

% MFT style files.
MFTINPUTS = .;$TEXMF/mft//

% PostScript headers, prologues (.pro), encodings (.enc) and fonts.
TEXPSHEADERS = .;$TEXMF/{dvips,pdftex,tex,fonts/type1}//

% PostScript Type 1 outline fonts.
T1FONTS = .;$TEXMF/fonts/type1//;$TEXMF/fonts/hbf//

% PostScript AFM metric files.
AFMFONTS = .;$TEXMF/fonts/afm//

% TrueType outline fonts.
TTFONTS = .;$TEXMF/fonts/truetype//

% Type 42 outline fonts.
T42FONTS = .;$TEXMF/fonts/type42//

% Dvips' config.* files (this name should not start with `TEX'!).
TEXCONFIG = .;$TEXMF/dvips//

% Makeindex style (.ist) files.
INDEXSTYLE = .;$TEXMF/makeindex//

% Used by DMP (ditroff-to-mpx), called by makempx -troff.
TRFONTS = /usr/lib/font/devpost
MPSUPPORT = .;$TEXMF/metapost/support

% For xdvi to find mime.types and .mailcap, if they do not exist in
% $HOME.  These are single directories, not paths.
% (But the default mime.types, at least, may well suffice.)
MIMELIBDIR = /usr/etc
MAILCAPLIBDIR = /usr/etc

% TeX documentation and source files, for use with kpsewhich.
TEXDOCS = .;$TEXMF/doc//
TEXSOURCES = .;$TEXMF/source//

% Web and CWeb input paths.
WEBINPUTS = .;$TEXMF/web//
CWEBINPUTS = .;$TEXMF/cweb//

% Omega-related fonts and other files.  The odd construction for OFMFONTS
% makes it behave in the face of a definition of TFMFONTS.  Unfortunately
% no default substitution would take place for TFMFONTS, so an explicit
% path is retained.
OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//;$TFMFONTS
OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovf//
OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
OTPINPUTS = .;$TEXMF/omega/otp//
OCPINPUTS = .;$TEXMF/omega/ocp//

% Some additional input variables for several programs.  If you add
% a program that uses the 'other text files' or 'other binary files'
% search formats, you'll want to add their variables here as well.
T4HTINPUTS   = .;$TEXMF/tex4ht//

% xdvik with type1 support can share some files with dvips
XDVIINPUTS = .;$TEXMF/{xdvi,dvips//}

%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
KPSE_DOT = .

% This definition isn't used from this .cnf file itself (that would be
% paradoxical), but the compile-time default in paths.h is built from it.
% The SELFAUTO* variables are set automatically from the location of
% argv[0], in kpse_set_progname.  
% 
% The TETEXDIR stuff isn't likely to relevant unless you're using teTeX,
% but it doesn't hurt.
%
% For security reasons, it is better not to have . part of the path.
% 
TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c};$TETEXDIR;/usr/share/texmf/web2c;/usr/share/texmf/web2c



%  Part 2: Non-path options.
 
% Write .log/.dvi/etc. files here, if the current directory is unwritable.
% TEXMFOUTPUT = /tmp

% If a dynamic file creation fails, log the command to this file, in
% either the current directory or TEXMFOUTPUT.  Set to the
% empty string or  0  to avoid logging.
MISSFONT_LOG = missfont.log

% Set to a colon-separated list of words specifying warnings to suppress.
% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
% TEX_HUSH = checksum:lostchar:readable:special
% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
TEX_HUSH = none

% Enable system commands via \write18{...}?
shell_escape = f

% Allow TeX \openin, \openout, or \input on filenames starting with `.'
% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
% a (any)        : any file can be opened.
% r (restricted) : disallow opening "dotfiles".
% p (paranoid)   : as 'r' and disallow going to parent directories, and
%                  restrict absolute paths to be under $TEXMFOUTPUT.
openout_any = p
openin_any = a

% Allow TeX, MF, and MP to parse the first line of an input file for
% the %&format construct.
parse_first_line = t

% Allow TeX, eTeX, Omega to include `src:' specials in the dvi file.
% These specials are used by viewers to jump from the viewer into 
% the editor at the right page/lineno.
% Possible values : none auto cr display hbox math par parend vbox
src_specials = none

% Enable the mktex... scripts by default?  These must be set to 0 or 1.
% Particular programs can and do override these settings, for example
% dvips's -M option.  Your first chance to specify whether the scripts
% are invoked by default is at configure time.
% 
% These values are ignored if the script names are changed; e.g., if you
% set DVIPSMAKEPK to `foo', what counts is the value of the environment
% variable/config value `FOO', not the `MKTEXPK' value.
% 
% MKTEXTEX = 0
% MKTEXPK = 0
% MKTEXMF = 0
% MKTEXTFM = 0
% MKOCP = 0
% MKOFM = 0

% What MetaPost runs to make MPX files.  This is passed an option -troff
% if MP is in troff mode.  Set to `0' to disable this feature.
MPXCOMMAND = makempx


%  Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
% 
% If you want to change some of these sizes only for a certain TeX
% variant, the usual dot notation works, e.g.,
% main_memory.hugetex = 20000000
% 
% If a change here appears to be ignored, try redumping the format file.

% Memory. Must be less than 8,000,000 total.
% 
% main_memory is relevant only to initex, extra_mem_* only to non-ini.
% Thus, have to redump the .fmt file after changing main_memory; to add
% to existing fmt files, increase extra_mem_*.  (To get an idea of how
% much, try \tracingstats=2 in your TeX source file;
% web2c/tests/memtest.tex might also be interesting.)
% 
% To increase space for boxes (as might be needed by, e.g., PiCTeX),
% increase extra_mem_bot.
% 
% For some xy-pic samples, you may need as much as 700000 words of memory.
% For the vast majority of documents, 60000 or less will do.
% 
main_memory.context = 1500000
main_memory.mpost = 1000000
main_memory = 263000 % words of inimemory available; also applies to inimf&mp
extra_mem_top = 0    % extra high memory for chars, tokens, etc.
extra_mem_bot = 0    % extra low memory for boxes, glue, breakpoints, etc.

obj_tab_size.context = 300000

% Words of font info for TeX (total size of all TFM files, approximately). 
font_mem_size = 400000

% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
font_max = 1000

% Extra space for the hash table of control sequences (which allows 10K
% names as distributed).
hash_extra.context = 40000
hash_extra = 0

% Max number of characters in all strings, including all error messages,
% help texts, font names, control sequences.  These values apply to TeX and MP.
pool_size.context = 750000
pool_size = 125000
% Minimum pool space after TeX/MP's own strings; must be at least
% 25000 less than pool_size, but doesn't need to be nearly that large.
string_vacancies.context = 45000
string_vacancies = 25000
% Maximum number of strings.
max_strings.context = 55000
max_strings = 15000
% min pool space left after loading .fmt
pool_free.context = 47500
pool_free = 5000

% Hyphenation trie. As distributed, the maximum is 65535; this should
% work unless `unsigned short' is not supported or is smaller than 16
% bits.  This value should suffice for UK English, US English, French,
% and German (for example).  To increase, you must change
% `ssup_trie_opcode' and `ssup_trie_size' in tex.ch (and rebuild TeX);
% the trie will then consume four bytes per entry, instead of two.
% 
% US English, German, and Portuguese: 30000.
% German: 14000.
% US English: 10000.
% 
trie_size = 64000

% Buffer size.  TeX uses the buffer to contain input lines, but macro
% expansion works by writing material into the buffer and reparsing the
% line.  As a consequence, certain constructs require the buffer to be
% very large.  As distributed, the size is 50000; most documents can be
% handled within a tenth of this size.
buf_size = 50000

hyph_size = 1000        % number of hyphenation exceptions, >610 and <32767.
nest_size.context = 500
nest_size = 100		% simultaneous semantic levels (e.g., groups)
max_in_open = 15	% simultaneous input files and error insertions
param_size.context = 1500
param_size = 500	% simultaneous macro parameters
save_size.context = 5000
save_size = 4000	% for saving values outside current group
stack_size.context = 1500
stack_size = 300	% simultaneous input sources

% These are Omega-specific.
ocp_buf_size = 20000	% character buffers for ocp filters.
ocp_stack_size = 10000	% stacks for ocp computations.
ocp_list_size = 1000	% control for multiple ocps.

% These work best if they are the same as the I/O buffer size, but it
% doesn't matter much.  Must be a multiple of 8.
dvi_buf_size = 16384 % TeX
gf_buf_size = 16384  % MF

% It's probably inadvisable to change these. At any rate, we must have:
% 45 < error_line      < 255;
% 30 < half_error_line < error_line - 15;
% 60 <= max_print_line;
% These apply to Metafont and MetaPost as well.
error_line = 79
half_error_line = 50
max_print_line = 79

% Settings for Debian jadetex
  hash_extra.jadetex  = 32500
  hash_extra.pdfjadetex  = 32500
  pool_size.jadetex = 500000
  pool_size.pdfjadetex = 500000
  string_vacancies.jadetex = 45000
  string_vacancies.pdfjadetex = 45000
  max_strings.jadetex = 58500
  max_strings.pdfjadetex = 58500
  pool_free.jadetex = 47500
  pool_free.pdfjadetex = 47500
  nest_size.jadetex = 500
  nest_size.pdfjadetex = 500
  param_size.jadetex = 1500
  param_size.pdfjadetex = 1500
  save_size.jadetex = 5000
  save_size.pdfjadetex = 5000
  stack_size.jadetex = 1500
  stack_size.pdfjadetex = 1500
  extra_mem_bot.jadetex = 85000
  extra_mem_bot.pdfjadetex = 85000
TEXINPUTS.amsptex = .;$TEXMF/{ptex,tex}/{amstex,plain,generic,}//
TEXINPUTS.iniptex = .;$TEXMF/{ptex,tex}/{plain,generic,}//
TEXINPUTS.platex = .;$TEXMF/{ptex,tex}/{platex,latex,generic,}//
TEXINPUTS.ptex = .;$TEXMF/{ptex,tex}/{plain,generic,}//

Reply to: