Boot problem, dma_timer_expiry: dma status == 0x64
Last weekend I installed testing with the latest installer and over network. Everything was
fine except that I had to reboot twice because the first boot failed with error. I now have an
testing installation which works sometimes. rebooting helps to get it working.
If I get:
dma_timer_expiry: dma status == 0x64
the only thing that helps is reboot.
This is a boot that failed.
Oct 24 19:15:39 localhost syslogd 1.4.1#15: restart.
Oct 24 19:15:39 localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Oct 24 19:15:39 localhost kernel: Inspecting /boot/System.map-2.6.8-1-386
Oct 24 19:15:39 localhost kernel: Loaded 28029 symbols from /boot/System.map-2.6.8-1-386.
Oct 24 19:15:39 localhost kernel: Symbols match kernel version 2.6.8.
Oct 24 19:15:39 localhost kernel: No module symbols loaded - kernel modules not enabled.
Oct 24 19:15:39 localhost kernel: 0xc00fbf00
Oct 24 19:15:39 localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf30, dseg 0xf0000
Oct 24 19:15:39 localhost kernel: PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
Oct 24 19:15:39 localhost kernel: PCI: Using ACPI for IRQ routing
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 169
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 177
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 185
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 193
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 177
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 185
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 209
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 217
Oct 24 19:15:39 localhost kernel: ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 225
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 209
Oct 24 19:15:39 localhost kernel: testing the IO APIC.......................
Oct 24 19:15:39 localhost kernel: Using vector-based indexing
Oct 24 19:15:39 localhost kernel: .................................... done.
Oct 24 19:15:39 localhost kernel: VFS: Disk quotas dquot_6.5.1
Oct 24 19:15:39 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 24 19:15:39 localhost kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Oct 24 19:15:39 localhost kernel: devfs: boot_options: 0x0
Oct 24 19:15:39 localhost kernel: Initializing Cryptographic API
Oct 24 19:15:39 localhost kernel: isapnp: Scanning for PnP cards...
Oct 24 19:15:39 localhost kernel: isapnp: No Plug & Play device found
Oct 24 19:15:39 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Oct 24 19:15:39 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 24 19:15:39 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 24 19:15:39 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Oct 24 19:15:39 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 24 19:15:39 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 24 19:15:39 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 24 19:15:39 localhost kernel: EISA: Probing bus 0 at eisa0
Oct 24 19:15:39 localhost kernel: EISA: Detected 0 cards.
Oct 24 19:15:39 localhost kernel: NET: Registered protocol family 2
Oct 24 19:15:39 localhost kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 24 19:15:39 localhost kernel: TCP: Hash tables configured (established 32768 bind 65536)
Oct 24 19:15:39 localhost kernel: NET: Registered protocol family 8
Oct 24 19:15:39 localhost kernel: NET: Registered protocol family 20
Oct 24 19:15:39 localhost kernel: ACPI: (supports S0 S1 S4 S4bios S5)
Oct 24 19:15:39 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Oct 24 19:15:39 localhost kernel: RAMDISK: Loading 4320 blocks [1 disk] into ram disk... done.
Oct 24 19:15:39 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly.
Oct 24 19:15:39 localhost kernel: Freeing unused kernel memory: 204k freed
Oct 24 19:15:39 localhost kernel: vesafb: probe of vesafb0 failed with error -6
Oct 24 19:15:39 localhost kernel: NET: Registered protocol family 1
Oct 24 19:15:39 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 24 19:15:39 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 24 19:15:39 localhost kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
Oct 24 19:15:39 localhost kernel: NFORCE2: chipset revision 162
Oct 24 19:15:39 localhost kernel: NFORCE2: not 100%% native mode: will probe irqs later
Oct 24 19:15:39 localhost kernel: NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 24 19:15:39 localhost kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Oct 24 19:15:39 localhost kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct 24 19:15:39 localhost kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct 24 19:15:39 localhost kernel: hda: SAMSUNG SV0802N, ATA DISK drive
Oct 24 19:15:39 localhost kernel: hda: IRQ probe failed (0xfffffdfc)
Oct 24 19:15:39 localhost kernel: Using anticipatory io scheduler
Oct 24 19:15:39 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 7
Oct 24 19:15:39 localhost kernel: hda: max request size: 1024KiB
Oct 24 19:15:39 localhost kernel: hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Oct 24 19:15:39 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 p8 p9 > p2
Oct 24 19:15:39 localhost kernel: hdc: CD-532E-B, ATAPI CD/DVD-ROM drive
Oct 24 19:15:39 localhost kernel: hdd: CD-W54E, ATAPI CD/DVD-ROM drive
Oct 24 19:15:39 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 24 19:15:39 localhost kernel: ReiserFS: hda6: found reiserfs format "3.6" with standard journal
Oct 24 19:15:39 localhost kernel: ReiserFS: hda6: using ordered data mode
Oct 24 19:15:39 localhost kernel: ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 24 19:15:39 localhost kernel: ReiserFS: hda6: checking transaction log (hda6)
Oct 24 19:15:39 localhost kernel: ReiserFS: hda6: Using r5 hash to sort names
Oct 24 19:15:39 localhost kernel: Adding 1951856k swap on /dev/hda8. Priority:-1 extents:1
Oct 24 19:15:39 localhost kernel: Real Time Clock Driver v1.12
Oct 24 19:15:39 localhost kernel: hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Oct 24 19:15:39 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Oct 24 19:15:39 localhost kernel: hdd: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache, DMA
Oct 24 19:15:39 localhost kernel: SCSI subsystem initialized
Oct 24 19:15:39 localhost kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Oct 24 19:15:39 localhost kernel: Capability LSM initialized
Oct 24 19:15:39 localhost kernel: SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Oct 24 19:15:39 localhost kernel: SGI XFS Quota Management subsystem
Oct 24 19:15:39 localhost kernel: XFS mounting filesystem hda5
Oct 24 19:15:39 localhost kernel: XFS mounting filesystem hda7
Oct 24 19:15:39 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
Oct 24 19:15:39 localhost kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[eb007000-eb0077ff] Max Packet=[2048]
Oct 24 19:15:39 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 177
Oct 24 19:15:39 localhost kernel: eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 225
Oct 24 19:15:39 localhost kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Oct 24 19:15:39 localhost kernel: 0000:01:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc800. Vers LK1.1.19
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 209
Oct 24 19:15:39 localhost kernel: sym0: <860> rev 0x2 at pci 0000:01:07.0 irq 209
Oct 24 19:15:39 localhost kernel: sym0: Symbios NVRAM, ID 7, Fast-20, SE, NO parity
Oct 24 19:15:39 localhost kernel: sym0: open drain IRQ line driver
Oct 24 19:15:39 localhost kernel: sym0: using LOAD/STORE-based firmware.
Oct 24 19:15:39 localhost kernel: sym0: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6.
Oct 24 19:15:39 localhost kernel: sym0: SCSI BUS has been reset.
Oct 24 19:15:39 localhost kernel: scsi0 : sym-2.1.18j
Oct 24 19:15:39 localhost kernel: ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Oct 24 19:15:39 localhost kernel: Intel 810 + AC97 Audio, version 1.01, 02:36:59 Oct 7 2004
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 185
Oct 24 19:15:39 localhost kernel: i810: NVIDIA nForce Audio found at IO 0xd800 and 0xd400, MEM 0x0000 and 0x0000, IRQ 185
Oct 24 19:15:39 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Oct 24 19:15:39 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Oct 24 19:15:39 localhost kernel: i810_audio: Resetting connection 0
Oct 24 19:15:39 localhost kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
Oct 24 19:15:39 localhost kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
Oct 24 19:15:39 localhost kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Oct 24 19:15:39 localhost kernel: i810_audio: setting clocking to 48648
Oct 24 19:15:39 localhost kernel: usbcore: registered new driver usbfs
Oct 24 19:15:39 localhost kernel: usbcore: registered new driver hub
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 193
Oct 24 19:15:39 localhost kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
Oct 24 19:15:39 localhost kernel: ehci_hcd 0000:00:02.2: irq 193, pci mem e0b33000
Oct 24 19:15:39 localhost kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
Oct 24 19:15:39 localhost kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Oct 24 19:15:39 localhost kernel: hub 1-0:1.0: USB hub found
Oct 24 19:15:39 localhost kernel: hub 1-0:1.0: 6 ports detected
Oct 24 19:15:39 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California
Oct 24 19:15:39 localhost kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 24 19:15:39 localhost kernel: HiSax: Linux Driver for passive ISDN cards
Oct 24 19:15:39 localhost kernel: HiSax: Version 3.5 (module)
Oct 24 19:15:39 localhost kernel: HiSax: Layer1 Revision 2.46.2.5
Oct 24 19:15:39 localhost kernel: HiSax: Layer2 Revision 2.30.2.4
Oct 24 19:15:39 localhost kernel: HiSax: TeiMgr Revision 2.20.2.3
Oct 24 19:15:39 localhost kernel: HiSax: Layer3 Revision 2.22.2.3
Oct 24 19:15:39 localhost kernel: HiSax: LinkLayer Revision 2.59.2.4
Oct 24 19:15:39 localhost kernel: input: PC Speaker
Oct 24 19:15:39 localhost kernel: input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Oct 24 19:15:39 localhost kernel: ts: Compaq touchscreen protocol output
Oct 24 19:15:39 localhost kernel: mice: PS/2 mouse device common for all mice
Oct 24 19:15:39 localhost kernel: inserting floppy driver for 2.6.8-1-386
Oct 24 19:15:39 localhost kernel: Floppy drive(s): fd0 is 1.44M
Oct 24 19:15:39 localhost kernel: FDC 0 is a post-1991 82077
Oct 24 19:15:39 localhost kernel: parport: PnPBIOS parport detected.
Oct 24 19:15:39 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 24 19:15:39 localhost kernel: parport0: irq 7 in use, resorting to polled operation
Oct 24 19:15:39 localhost kernel: agpgart: Detected NVIDIA nForce2 chipset
Oct 24 19:15:39 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M
Oct 24 19:15:39 localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 177
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.0: irq 177, pci mem e0bd9000
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Oct 24 19:15:39 localhost kernel: hub 2-0:1.0: USB hub found
Oct 24 19:15:39 localhost kernel: hub 2-0:1.0: 3 ports detected
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 185
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.1: irq 185, pci mem e0c72000
Oct 24 19:15:39 localhost kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Oct 24 19:15:39 localhost kernel: hub 3-0:1.0: USB hub found
Oct 24 19:15:39 localhost kernel: hub 3-0:1.0: 3 ports detected
Oct 24 19:15:39 localhost kernel: usb 2-1: new full speed USB device using address 2
Oct 24 19:15:39 localhost kernel: usb 2-2: new full speed USB device using address 3
Oct 24 19:15:39 localhost kernel: usb 3-1: new full speed USB device using address 2
Oct 24 19:15:39 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3242
Oct 24 19:15:39 localhost kernel: usbcore: registered new driver usblp
Oct 24 19:15:39 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 24 19:15:39 localhost kernel: Initializing USB Mass Storage driver...
Oct 24 19:15:39 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Oct 24 19:15:39 localhost kernel: Vendor: Model: USB Card Reader Rev: 1.01
Oct 24 19:15:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 24 19:15:39 localhost kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Oct 24 19:15:39 localhost kernel: Vendor: Model: USB Card Reader Rev: 1.01
Oct 24 19:15:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 24 19:15:39 localhost kernel: SCSI device sdb: 16000 512-byte hdwr sectors (8 MB)
Oct 24 19:15:39 localhost kernel: sdb: assuming Write Enabled
Oct 24 19:15:39 localhost kernel: /dev/scsi/host1/bus0/target0/lun1: p1
Oct 24 19:15:39 localhost kernel: Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
Oct 24 19:15:39 localhost kernel: Vendor: Model: USB Card Reader Rev: 1.01
Oct 24 19:15:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 24 19:15:39 localhost kernel: Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
Oct 24 19:15:39 localhost kernel: Vendor: Model: USB Card Reader Rev: 1.01
Oct 24 19:15:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 24 19:15:39 localhost kernel: Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
Oct 24 19:15:39 localhost kernel: usbcore: registered new driver usb-storage
Oct 24 19:15:39 localhost kernel: USB Mass Storage support registered.
Oct 24 19:15:39 localhost kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Oct 24 19:15:39 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 24 19:15:39 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 24 19:15:39 localhost kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 24 19:15:39 localhost kernel: Linux video capture interface: v1.00
Oct 24 19:15:39 localhost kernel: bttv: driver version 0.9.15 loaded
Oct 24 19:15:39 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 24 19:15:39 localhost kernel: bttv: Bt8xx card found (0).
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 201, latency: 32, mmio: 0xe6000000
Oct 24 19:15:39 localhost kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Oct 24 19:15:39 localhost kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Oct 24 19:15:39 localhost kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Oct 24 19:15:39 localhost kernel: bttv0: Hauppauge eeprom: model=61344, tuner=Philips FM1216 (5), radio=yes
Oct 24 19:15:39 localhost kernel: bttv0: using tuner=5
Oct 24 19:15:39 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Oct 24 19:15:39 localhost kernel: msp34xx: init: chip=MSP3415D-B3 +nicam +simple
Oct 24 19:15:39 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct 24 19:15:39 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct 24 19:15:39 localhost kernel: msp3410: daemon started
Oct 24 19:15:39 localhost kernel: tvaudio: TV audio decoder + audio/video mux driver
Oct 24 19:15:39 localhost kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
Oct 24 19:15:39 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
Oct 24 19:15:39 localhost kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]
Oct 24 19:15:39 localhost kernel: bttv0: registered device video0
Oct 24 19:15:39 localhost kernel: bttv0: registered device vbi0
Oct 24 19:15:39 localhost kernel: bttv0: registered device radio0
Oct 24 19:15:39 localhost kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Oct 24 19:15:39 localhost kernel: ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 16 (level, high) -> IRQ 201
Oct 24 19:15:39 localhost kernel: btaudio: driver version 0.7 loaded [digital+analog]
Oct 24 19:15:39 localhost kernel: bt878: AUDIO driver version 0.0.0 loaded
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:39 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:15:39 localhost kernel: hda: lost interrupt
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:39 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:15:39 localhost kernel: hda: lost interrupt
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:39 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:15:39 localhost kernel: hda: lost interrupt
Oct 24 19:15:39 localhost kernel: NET: Registered protocol family 17
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:39 localhost last message repeated 2 times
Oct 24 19:15:39 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:15:39 localhost kernel: hda: lost interrupt
Oct 24 19:15:39 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:15:59 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:16:09 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:16:09 localhost kernel: hda: lost interrupt
Oct 24 19:16:32 localhost kernel: hda: dma_timer_expiry: dma status == 0x64
Oct 24 19:16:42 localhost kernel: hda: DMA interrupt recovery
Oct 24 19:16:42 localhost kernel: hda: lost interrupt
Reply to: