RE: Need Help with ATI Graphic Card bring up

["Bizhan Gholikhamseh (bgholikh)" <bgholikh@cisco.com>]

 Hi

> -----Original Message-----
> From: Michel Dänzer [mailto:daenzer@debian.org] 
> Sent: Saturday, August 02, 2008 10:07 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: debian-powerpc@lists.debian.org
> Subject: RE: Need Help with ATI Graphic Card bring up
> 
> On Fri, 2008-08-01 at 13:35 -0700, Bizhan Gholikhamseh 
> (bgholikh) wrote:
> > 
> > > -----Original Message-----
> > > From: Michel Dänzer [mailto:daenzer@debian.org]
> > > 
> > > On Thu, 2008-07-31 at 15:49 -0700, Bizhan Gholikhamseh
> > > (bgholikh) wrote:
> > > > 
> > > > We have an embedded custom board PowerPC board (Freescale).
> > > > I have  booted Debian 3.1 (Sarge) on the system running 
> on Linux 
> > > > kernel 2.6.23.
> > > > I have an ATI graphic card Radeon 9250 PCI card.
> > > >  
> > > > I would like to run flash application on the graphic card to do 
> > > > performance testing on the flash performance on the system.
> > > >  
> > > > I am not able to get anything out of the Graphic card, my
> > > assumption
> > > > is XFree86 has x86 emulation and will load appropriate
> > > driver module
> > > > for the card.
> > > 
> > > In theory, yes. Please provide the /etc/X11/XF86Config-4 or 
> > > /etc/X11/xorg.conf file you're using and the 
> /var/log/XFree86.0.log 
> > > or /var/log/Xorg.0.log file resulting from trying to start the X 
> > > server.
> > 
> > I have attached the log file and the configuration file.
> 
> [...]
> 
> > Fatal server error:
> > xf86OpenConsole: Cannot find a free VT
> 
> Is CONFIG_VT enabled in your kernel build configuration? Does 
> fiddling with any of the options listed by
> 
> XFree86 -help 2>&1|grep -i vt
> 
> help?

Hi
Sorry it took a while, I had issue to boot the system due to some other reason.

I enabled "Virtual Terminal" in the kernel build, and here is the output:
root@MPC837xMDS:/etc/X11# XFree86 -help 2>&1|grep -i vt
vtXX                   use the specified VT number

After that I ran the startx and seems it went furture, however, still it failed.
I am using usb mouse and keyboard.
I have attached the XFree86 log file and also the config file. 

Many thanks in advance,
Regards,
Bizhan

Attachment: XF86Config-4
Description: XF86Config-4

Attachment: XFree86.0.log
Description: XFree86.0.log