LS-120 drive
Hi, I'm running 2.2r2, kernel 2.2.1pre20-ben3 and I'm trying to get my imation
LS-120 superdrive to work (on my revA imac)
I've applied the patch to usb-storage.c and compiled and inserted it, but I
seem to be having trouble with scsi emulation still. When I try 'mount -t
vfat /dev/sda /mnt' I get:
mount: the kernel does not recognise /dev/sda as a block device
(maybe `insmod driver'?)
and 'mount -t vfat /dev/sg0 /mnt' (with or without module sg inserted):
mount: /dev/sg0 is not a block device
These are the messages from dmesg after 'insmod usb-storage' (with drive
already connected):
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
scsi : 2 hosts.
usb-storage: bus_reset() requested but not implemented
usb-storage: bus_reset() requested but not implemented
usb-storage: host_reset() requested but not implemented
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
USB Mass Storage support registered.
The entry for the drive from /proc/bus/usb/devices is:
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04e6 ProdID=0001 Rev= 2.00
S: Manufacturer=Shuttle Technology Inc.
S: Product=E-USB Bridge
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Does anyone have any ideas? I would be happy to supply any further
information. Thanks in advance, Mark.
Reply to: