Re: SUCCESS!!! Re: Installing Debian on a Qube 1
On Tue, Nov 09, 2004 at 10:53:14PM +0000, Peter Horton wrote:
> Any chance of a full boot log and a full /proc/pci / lspci -vvx ?
now that i can log into the machine, most certainly.
is attached.
greetings, martin.
--
- Pike - Caudium - sTeam - psycMUVE - LPC -
Pike Camp, October 13 - 19, 2004, Unperfekthaus, Essen, Germany
--
pike programmer travelling and working in europe open-steam.org
unix system- is.schon.org camp.gotpike.org
administrator bahai.or.at iaeste.(tuwien.ac|or).at
Martin Bähr http://www.iaeste.or.at/~mbaehr/
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Galileo Technology Ltd. GT-64011/GT-64111 System Controller (rev 1).
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x0 [0xffffff].
Non-prefetchable 32 bit memory at 0x1000000 [0x1000fff].
Prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
Prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
Non-prefetchable 32 bit memory at 0x14000000 [0x14000fff].
I/O at 0x14000000 [0x14000fff].
Bus 0, device 7, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 33).
IRQ 13.
I/O at 0x10100000 [0x1010007f].
Non-prefetchable 32 bit memory at 0x90003400 [0x9000347f].
Bus 0, device 9, function 0:
ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 39).
Bus 0, device 9, function 1:
IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
Master Capable. Latency=64.
I/O at 0xcc00 [0xcc0f].
Bus 0, device 9, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 2).
Master Capable. Latency=22.
I/O at 0x300 [0x31f].
Bus 0, device 10, function 0:
Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
IRQ 9.
Master Capable. Latency=64. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0x12001000 [0x12001fff].
I/O at 0x108000 [0x10803f].
Non-prefetchable 32 bit memory at 0x12100000 [0x121fffff].
0000:00:00.0 Host bridge: Marvell Technology Group Ltd.: Unknown device 4146 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64, Cache Line Size: 0x07 (28 bytes)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 01000000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at 1c000000 (32-bit, prefetchable) [size=32M]
Region 3: Memory at 1f000000 (32-bit, prefetchable) [size=16M]
Region 4: Memory at 14000000 (32-bit, non-prefetchable) [size=4K]
Region 5: I/O ports at 14000000 [disabled] [size=4K]
Expansion ROM at 1f000000 [disabled] [size=16M]
00: ab 11 46 41 06 00 80 22 01 00 00 06 07 40 00 00
10: 00 00 00 00 00 00 00 01 08 00 00 1c 08 00 00 1f
20: 00 00 00 14 01 00 00 14 00 00 00 00 00 00 00 00
30: 00 00 00 1f 00 00 00 00 00 00 00 00 00 01 00 00
0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 13
Region 0: I/O ports at 10100000 [size=128]
Region 1: Memory at 90003400 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 08800000 [disabled] [size=256K]
00: 11 10 14 00 47 00 80 02 21 00 00 02 00 00 00 00
10: 01 00 10 10 00 34 00 90 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 80 08 00 00 00 00 00 00 00 00 0d 01 00 00
0000:00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 27)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 86 05 07 00 00 02 27 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:09.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at cc00 [size=16]
00: 06 11 71 05 05 02 80 02 06 8a 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 00 00
0000:00:09.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 0
Region 4: I/O ports at 0300 [size=32]
00: 06 11 38 30 01 00 00 02 02 00 03 0c 00 16 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 03 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00
0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 12001000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 108000 [size=64]
Region 2: Memory at 12100000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 86 80 29 12 07 00 90 02 08 00 00 02 00 40 00 00
10: 00 10 00 12 01 80 10 10 00 00 10 12 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 0c 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 08 38
Reply to: