Hi again! I already posted something on this list, but I did not receive many answers. I hope to be luckier now:-) The short version of the problem is the following: when the screen of my laptop should switch off, instead of black it becomes white! A bit longer version: it is not 100 percent white, and the transition is not immediate. It starts getting brighter and brighter at the borders, and then it expands till the centre of the screen (it takes nearly one second to complete). It looks like it is burning, but the screen comes back as it was before as soon as I move the mouse or press a key. I have a Fujitsu-Siemens Amilo A7645, with AMD Turion64. I'm running Debian for AMD64, with kernel 2.6.12. The graphic card is a SiS M760. I'm using the framebuffer (sisfb + fbcon) and Xorg 6.8.2. Here is the relevant part of my xorg.conf: --------------- Section "Device" Identifier "Generic Video Card" Driver "sis" BusID "PCI:1:0:0" Option "UseFBDev" "true" Option "DRI" "true" Option "UseSSE" "true" Option "ScaleLCD" "no" Option "UseColorHWCursor" "yes" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" EndSection --------------- And here is lscpi -vv (just the part about the graphic card): 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP (prog-if 00 [VGA]) Subsystem: Unknown device 1734:106c Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- BIST result: 00 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Bye, Halva
Attachment:
signature.asc
Description: OpenPGP digital signature