Dear Debian maintainer, On Monday, September 07, 2015, I notified you of the beginning of a review process concerning debconf templates for open-iscsi. The debian-l10n-english contributors have now reviewed these templates, and the final proposed changes are attached to this update to the original bug report. Please review the suggested changes, and if you have any objections, let me know in the next 3 days. However, please try to avoid uploading open-iscsi with these changes right now. The second phase of this process will begin on Tuesday, September 29, 2015, when I will coordinate updates to translations of debconf templates. The existing translators will be notified of the changes: they will receive an updated PO file for their language. Simultaneously, a general call for new translations will be sent to the debian-i18n mailing list. Both these calls for translations will request updates to be sent as individual bug reports. That will probably trigger a lot of bug reports against your package, but these should be easier to deal with. The call for translation updates and new translations will run until about Tuesday, October 20, 2015. Please avoid uploading a package with fixed or changed debconf templates and/or translation updates in the meantime. Of course, other changes are safe. Please note that this is an approximative delay, which depends on my own availability to process this work and is influenced by the fact that I simultaneously work on many packages. Around Wednesday, October 21, 2015, I will contact you again and will send a final patch summarizing all the updates (changes to debconf templates, updates to debconf translations and new debconf translations). Again, thanks for your attention and cooperation. --
# These templates have been reviewed by the debian-l10n-english # team # # If modifications/additions/rewording are needed, please ask # debian-l10n-english@lists.debian.org for advice. # # Even minor modifications require translation updates and such # changes should be coordinated with translators and reviewers. Template: open-iscsi/remove_even_with_active_sessions Type: boolean #flag:translate!:6,8 _Description: Proceed with removing open-iscsi? There are currently active iSCSI sessions. If you remove open-iscsi now this may lead to data loss and/or hang the system at shutdown. . Do not do this if this system's root filesystem is on iSCSI. . If you do proceed, open-iscsi will try to unmount all filesystems on iSCSI and log out from current sessions. If that fails (because a filesystem is still in use), the kernel will keep the current iSCSI sessions open, but will not perform any recovery if there is an interruption of the network connection (or if the target is rebooted). . If you really intend to remove open-iscsi, you should abort here and then stop open-iscsi: . service open-iscsi stop . If that did not clean up everything, manually umount all filesystems that are on iSCSI, manually dismantle the storage stack, and only then log out from all iSCSI sessions: . iscsiadm -m node --logoutall=all . At that point, it should be safe to remove this package. Template: open-iscsi/upgrade_even_with_failed_sessions Type: boolean _Description: Proceed with upgrading open-iscsi? There are currently failed iSCSI sessions. Upgrading open-iscsi may cause data loss. . If you do not proceed, the preinstallation script will be aborted and you will have the option to manually recover the iSCSI sessions. (Note that aborting an upgrade is problematic if you are dist-upgrading your entire system.) You may also recover the iSCSI sessions manually while keeping this prompt open and then choose to proceed. Or you may choose to proceed directly, after which iscsid will be restarted and session recovery will be attempted once more. Template: open-iscsi/upgrade_recovery_error Type: error _Description: iSCSI recovery error on upgrade The iscsid daemon was restarted, but couldn't recover all iSCSI sessions. This is bad and could lead to data loss. Please check the system and kernel logs to determine the cause of the issue. . Please do not acknowledge this note until you have fixed the problem from a separate login shell. Template: open-iscsi/downgrade_and_break_system Type: boolean _Description: Proceed with downgrading open-iscsi? You are trying to downgrade open-iscsi. Because of changes between the version you are downgrading to and the version currently installed, this downgrade will break the system. . If you really intend to downgrade, please follow the following procedure instead: umount all iSCSI file systems, log out of all iSCSI sessions, back up /etc/iscsi, purge open-iscsi, and reinstall the older version.
Source: open-iscsi
Section: net
Priority: optional
Maintainer: Debian iSCSI Maintainers <pkg-iscsi-maintainers@lists.alioth.debian.org>
Uploaders: Ritesh Raj Sarraf <rrs@debian.org>, Christian Seiler <christian@iwakd.de>
Build-Depends: debhelper (>= 9), bzip2, bison, flex, autotools-dev, dh-autoreconf, dh-exec, dpkg-dev (>= 1.16.1~), po-debconf, dh-systemd
Standards-Version: 3.9.6
Vcs-Git: git://anonscm.debian.org/pkg-iscsi/open-iscsi.git
Vcs-Browser: http://anonscm.debian.org/gitweb/?p=pkg-iscsi/open-iscsi.git
Homepage: http://www.open-iscsi.org/
Package: open-iscsi
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, udev
Pre-Depends: debconf | debconf-2.0
Description: iSCSI initiator tools
Open-iSCSI is a high-performance, transport independent, multi-platform
implementation of the RFC3720 Internet Small Computer Systems Interface
(iSCSI).
.
Open-iSCSI is partitioned into user and kernel parts, where the kernel
portion implements the iSCSI data path (i.e. iSCSI Read and iSCSI Write).
The userspace contains the entire control plane:
* Configuration Manager;
* iSCSI Discovery;
* Login and Logout processing;
* Connection level error processing;
* Nop-In and Nop-Out handling;
* (in the future) Text processing, iSNS, SLP, Radius, etc.
.
This package includes a daemon, iscsid, and a management utility,
iscsiadm.
Package: open-iscsi-udeb
# Note: the (virtual) udeb package scsi-modules (provided by different
# linux kernel udebs) must exist for these architectures - so
# check that before adding them to this list; the other
# scsi-(core|common|...)-modules are NOT sufficient!
Architecture: amd64 arm64 i386 ia64 mips mipsel powerpc s390x ppc64el ppc64 armhf
Section: debian-installer
Package-Type: udeb
Depends: ${shlibs:Depends}, ${misc:Depends}, scsi-modules, libnss-files-udeb
Description: Configure iSCSI
Open-iSCSI is a high-performance, transport independent, multi-platform
implementation of the RFC3720 Internet Small Computer Systems Interface
(iSCSI).
.
This is the minimal package (udeb) used by debian-installer.
#Package: linux-iscsi-modules-source
#Architecture: all
#Depends: ${shlibs:Depends}, ${misc:Depends}, module-assistant, debhelper (>= 4.0.0), bzip2
#Description: Source Code for the Linux iSCSI Kernel Modules
# Along with make-kpkg, this package maybe used to build a linux-iscsi-modules
# package for a kernel-image package.
--- open-iscsi.old/debian/open-iscsi.templates 2015-09-03 07:12:44.672751389 +0200
+++ open-iscsi/debian/open-iscsi.templates 2015-09-26 08:33:28.888043898 +0200
@@ -1,31 +1,44 @@
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# debian-l10n-english@lists.debian.org for advice.
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
Template: open-iscsi/remove_even_with_active_sessions
Type: boolean
-_Description: Do you want to proceed with removing open-iscsi?
+#flag:translate!:6,8
+_Description: Proceed with removing open-iscsi?
There are currently active iSCSI sessions. If you remove open-iscsi
- now this may lead to data loss and/or hang your system at shutdown.
+ now this may lead to data loss and/or hang the system at shutdown.
.
- DO NOT DO THIS IF YOUR ROOT FILESYSTEM IS ON ISCSI!
+ Do not do this if this system's root filesystem is on iSCSI.
.
If you do proceed, open-iscsi will try to unmount all filesystems on
- iSCSI and logout from current sessions. If that fails (because a
- filesystem is still in use), the kernel will keep open the current
- iSCSI sessions, but not perform any recovery in case there is an
- interruption of the network connection (or the target is rebooted
- etc.).
+ iSCSI and log out from current sessions. If that fails (because a
+ filesystem is still in use), the kernel will keep the current
+ iSCSI sessions open, but will not perform any recovery if there is an
+ interruption of the network connection (or if the target is rebooted).
+ .
+ If you really intend to remove open-iscsi, you should abort here and
+ then stop open-iscsi:
.
- If you really want to remove open-iscsi, it is advisable to abort here
- and to first stop open-iscsi:
service open-iscsi stop
+ .
If that did not clean up everything, manually umount all filesystems
- that are on iSCSI, manually dismantle the storage stack and only then
- logout from all iSCSI sessions:
+ that are on iSCSI, manually dismantle the storage stack, and only then
+ log out from all iSCSI sessions:
+ .
iscsiadm -m node --logoutall=all
+ .
At that point, it should be safe to remove this package.
Template: open-iscsi/upgrade_even_with_failed_sessions
Type: boolean
-_Description: Do you want to proceed with upgrading open-iscsi?
- There are currently failed iSCSI sessions. Upgrading open-iscsi MAY
+_Description: Proceed with upgrading open-iscsi?
+ There are currently failed iSCSI sessions. Upgrading open-iscsi may
cause data loss.
.
If you do not proceed, the preinstallation script will be aborted and
@@ -37,22 +50,22 @@
recovery will be attempted once more.
Template: open-iscsi/upgrade_recovery_error
-Type: note
+Type: error
_Description: iSCSI recovery error on upgrade
- iscsid was restarted, but couldn't recover all iSCSI sessions. This is
- bad and could lead to DATA LOSS. Please check your system and kernel
+ The iscsid daemon was restarted, but couldn't recover all iSCSI sessions.
+ This is bad and could lead to data loss. Please check the system and kernel
logs to determine the cause of the issue.
.
- Please DO NOT acknowledge this note until you have fixed the problem
+ Please do not acknowledge this note until you have fixed the problem
from a separate login shell.
Template: open-iscsi/downgrade_and_break_system
Type: boolean
-_Description: Do you really want to downgrade open-iscsi?
+_Description: Proceed with downgrading open-iscsi?
You are trying to downgrade open-iscsi. Because of changes between the
version you are downgrading to and the version currently installed,
- this downgrade WILL BREAK YOUR SYSTEM.
+ this downgrade will break the system.
.
- If you really want to downgrade, please follow the following procedure
+ If you really intend to downgrade, please follow the following procedure
instead: umount all iSCSI file systems, log out of all iSCSI sessions,
- back up /etc/iscsi, purge open-iscsi and reinstall the older version.
+ back up /etc/iscsi, purge open-iscsi, and reinstall the older version.
--- open-iscsi.old/debian/control 2015-09-03 07:12:44.672751389 +0200
+++ open-iscsi/debian/control 2015-09-11 18:14:39.868822690 +0200
@@ -13,21 +13,23 @@
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, udev
Pre-Depends: debconf | debconf-2.0
-Description: High performance, transport independent iSCSI implementation
+Description: iSCSI initiator tools
Open-iSCSI is a high-performance, transport independent, multi-platform
- implementation of RFC3720 iSCSI
+ implementation of the RFC3720 Internet Small Computer Systems Interface
+ (iSCSI).
.
- Open-iSCSI is partitioned into user and kernel parts where the kernel
- portion implements iSCSI data path (i.e. iSCSI Read and iSCSI Write)
- The userspace contains the entire control plane consisting of:
- * Configuration Manager
- * iSCSI Discovery, Login and Logout processing
- * Connection level error processing
- * Nop-In and Nop-Out handling
- * Text processing, iSNS, SLP, Radius et cetera (future)
+ Open-iSCSI is partitioned into user and kernel parts, where the kernel
+ portion implements the iSCSI data path (i.e. iSCSI Read and iSCSI Write).
+ The userspace contains the entire control plane:
+ * Configuration Manager;
+ * iSCSI Discovery;
+ * Login and Logout processing;
+ * Connection level error processing;
+ * Nop-In and Nop-Out handling;
+ * (in the future) Text processing, iSNS, SLP, Radius, etc.
.
- The userspace component consists of a daemon, iscsid and a management
- utility, iscsiadm
+ This package includes a daemon, iscsid, and a management utility,
+ iscsiadm.
Package: open-iscsi-udeb
# Note: the (virtual) udeb package scsi-modules (provided by different
@@ -40,7 +42,8 @@
Depends: ${shlibs:Depends}, ${misc:Depends}, scsi-modules, libnss-files-udeb
Description: Configure iSCSI
Open-iSCSI is a high-performance, transport independent, multi-platform
- implementation of RFC3720 iSCSI.
+ implementation of the RFC3720 Internet Small Computer Systems Interface
+ (iSCSI).
.
This is the minimal package (udeb) used by debian-installer.
@@ -50,4 +53,3 @@
#Description: Source Code for the Linux iSCSI Kernel Modules
# Along with make-kpkg, this package maybe used to build a linux-iscsi-modules
# package for a kernel-image package.
-
Attachment:
signature.asc
Description: PGP signature