Quoting Michael Tautschnig (mt@debian.org): > Hi dle-team, > > As pointed out by bubulle my initial set of questions for clamav-milter (part of > the ClamAV package, which is now configurable via debconf) was severely broken. > I've tried to fix the major problems, but there might still be some technical > issues, and surely there is room for improvement in terms of wording and > grammar. > > I'd be grateful if the attached new debconf questions could be reviewed. There > is no deadline from our the clamav maintainer's perspective. Once the review is > finished I'll send out call for translations. Hmmm, well, after the initial discussion, I launched a formal review which, indeed, just finished..:-)...IIRC, clamav@packages.qa.debian.org was CC'ed to the review. Attached is the result of that review. If you agree with this version (please check it....this is based on the templates file we discussed about, 10 days ago....I haven't checked whether you actually added tempaltes), I propose sending the call for translations myself, just as I do when we conduct a full review.
Template: clamav-milter/debconf Type: boolean Default: true _Description: Handle the configuration file automatically? Some options must be configured for clamav-milter. . It won't work if it isn't configured. If you do not configure it automatically, you'll have to configure /etc/clamav/clamav-milter.conf manually or run "dpkg-reconfigure clamav-milter" later. In any case, manual changes in /etc/clamav/clamav-milter.conf will be respected. Template: clamav-milter/MilterSocket Type: string Default: /var/run/clamav/milter.ctl _Description: Communication interface with Sendmail: Please choose the method that should be used by clamav-milter to communicate with Sendmail. The following formats can be used: - Unix domain socket: [[unix|local]:]/path/to/file - IPv4 socket : inet:port@[hostname|ip-address] - IPv6 socket : inet6:port@[hostname|ip-address] Template: clamav-milter/FixStaleSocket Type: boolean Default: true _Description: Remove stale socket after unclean shutdown? Template: clamav-milter/User Type: string Default: clamav _Description: User to run clamav-milter as: It is recommended to run the ClamAV programs as a non-privileged user. This will work with most MTAs with a little tweaking. However, using clamd for file system scans will require running clamav-milter as root. . Please see README.Debian in the clamav-base package for details. Template: clamav-milter/AddGroups Type: string _Description: Groups for clamav-milter (space-separated): By default, clamav-milter runs as a non-privileged user. If you need clamav-milter to be able to access files owned by another user (for instance when it is used in combination with an MTA), this user need to be added to the relevant group(s). . Please see README.Debian in the clamav-base package for details. Template: clamav-milter/ReadTimeout Type: string Default: 120 _Description: Wait timeout for data coming from clamd: Please enter the delay (in seconds) before clamav-milter times out when it is waiting for incoming data from clamd. . Choosing "0" will disable this timeout. Template: clamav-milter/Foreground Type: boolean Default: false _Description: Should clamav-milter stay in foreground (not forking)? Template: clamav-milter/Chroot Type: string _Description: Chroot to directory: Clamav-milter can run in a chroot jail. It will enter it after reading the configuration file and before dropping root privileges. . If this field is left empty, no chrooting will occur. Template: clamav-milter/PidFile Type: string Default: /var/run/clamav/clamav-milter.pid _Description: PID file: Please specify the process identifier file location for clamav-milter's listening daemon (main thread). Template: clamav-milter/TemporaryDirectory Type: string Default: /tmp _Description: Global temporary directory path: Please specify the directory for clamav-milter's temporary files. If unset, $TMPDIR and $TEMP will be honored. Template: clamav-milter/ClamdSocket Type: string Default: unix:/var/run/clamav/clamd.ctl _Description: Clamd socket to connect to for scanning: Please specify the socket to use to connect to the ClamAV daemon for scanning purposes. Possible choices are: - a local unix socket using an absolute path, in "unix:path" format (for example: unix:/var/run/clamd/clamd.socket); - a local or remote TCP socket in "tcp:host:port" format (for example: tcp:192.168.0.1). The "host" value can be either a hostname or an IP address, and the "port" is only required for IPv6 addresses, defaulting to 3310 otherwise. . You may specify multiple choices, separated by spaces. In such cases, the clamd servers will be selected in a round-robin fashion. Template: clamav-milter/LocalNet Type: string _Description: Hosts excluded from scanning: Please specify, in CIDR notation (host(name)/mask), the hosts for which no scanning should be performed on incoming mail. Multiple entries should be separated by spaces. The "local" shortcut can be used to specify locally-originated (non-SMTP) email. . If this field is left empty, all incoming mail will be scanned. Template: clamav-milter/Whitelist Type: string _Description: Mail addresses whitelist: Please specify the path to a whitelist file, listing email addresses that should cause scanning to be bypassed. . Each line in this file should be a POSIX regular expression; lines starting with "#", ":" or "!" will be ignored as comments. . Lines may start with "From:" (with no space after the colon) to make the whitelisting apply to matching sender addresses; otherwise, or with a "To:" prefix, it affects recipient addresses. Template: clamav-milter/OnClean Type: select __Choices: Accept, Reject, Defer, Blackhole, Quarantine Default: Accept _Description: Action to perform on clean messages: Please choose the action to perform on "clean" messages: . - Accept : accept the message for delivery; - Reject : immediately refuse delivery (with a 5xx error); - Defer : return a temporary failure message (4xx); - Blackhole : accept the message then drop it; - Quarantine: accept the message then quarantine it. With Sendmail, the quarantine queue can be examined with "mailq -qQ". With Postfix, such mails are placed on hold. . This setting is meant for testing purposes only. Template: clamav-milter/OnInfected Type: select __Choices: Accept, Reject, Defer, Blackhole, Quarantine Default: Quarantine _Description: Action to perform on infected messages: Please choose the action to perform on "infected" messages: . - Accept : accept the message for delivery; - Reject : immediately refuse delivery (with a 5xx error); - Defer : return a temporary failure message (4xx); - Blackhole : accept the message then drop it; - Quarantine: accept the message then quarantine it. With Sendmail, the quarantine queue can be examined with "mailq -qQ". With Postfix, such mails are placed on hold. Template: clamav-milter/OnFail Type: select __Choices: Accept, Reject, Defer Default: Defer _Description: Action to perform on error conditions: Please choose the action to perform on errors such as failure to allocate data structures, no scanners available, network timeouts, unknown scanner replies...: . - Accept: accept the message for delivery; - Reject: immediately refuse delivery (with a 5xx error); - Defer : return a temporary failure message (4xx). Template: clamav-milter/RejectMsg Type: string _Description: Specific rejection reason for infected messages: Please specify the rejection reason that will be included in reject mails. . This option is only useful together with "OnInfected Reject". . The "%v" string may be used to include the virus name. Template: clamav-milter/AddHeader Type: boolean Default: false _Description: Add headers to processed messages? If you choose this option, "X-Virus-Scanned" and "X-Virus-Status" headers will be attached to each processed message, possibly replacing existing similar headers. Template: clamav-milter/LogFile Type: string Default: none _Description: Log file for clamav-milter: Specify the full path to the clamav-milter log file, which must be writable for the clamav daemon. . Logging via syslog is configured independently of this setting. Template: clamav-milter/LogFileUnlock Type: boolean Default: false _Description: Disable log file locking? By default the log file is locked for writing. The lock protects against running clamav-milter multiple times. This option disables log file locking. Template: clamav-milter/LogFileMaxSize Type: string Default: 1M _Description: Maximum size of the log file (MB): Please specify the maximum size for the log file. Using "0" will allow that file to grow indefinitely. Template: clamav-milter/LogTime Type: boolean Default: false _Description: Log time with each message? Template: clamav-milter/LogSyslog Type: boolean Default: false _Description: Use system logger? Please choose whether you want to use the system logger (syslog). This option can be used along with logging in a dedicated file. Template: clamav-milter/LogFacility Type: string Default: LOG_LOCAL6 _Description: Type of syslog messages: Please choose the type of syslog messages as detailed in the system logger's documentation. Template: clamav-milter/LogVerbose Type: boolean Default: false _Description: Enable verbose logging? Template: clamav-milter/LogInfected Type: select __Choices: Off, Basic, Full Default: Off _Description: Information to log on infected messages: Please choose the level of information that will be logged when infected messages are found: - Off : no logging; - Basic: minimal information; - Full : verbose information. Template: clamav-milter/MaxFileSize Type: string Default: 25M _Description: Size limit for scanned messages (MB): Please specify the maximum size for scanned messages. Messages bigger than this limit will not be scanned. . You should check that this value is lower than the value of "StreamMaxLength" in the clamd.conf file.
Attachment:
signature.asc
Description: Digital signature