Bug#994740: linux-image-4.19.0-17-amd64: Attached USB webcam breaks sound, load > 4 and error messages
Package: src:linux
Version: 4.19.194-3
Severity: normal
Dear Maintainer,
Kernel was updated from 4.19.181-1 to 4.19.194-3
Booting with previous kernel works. With new kernel I have to unplug
Philips ToUcam Pro USB webcam (very old, I think got it 20 years ago).
When booting with the new kernel and Philips attached sound does not
work, load is over 4, system is very slow despite having lots of free
memory, syslog has error messages:
Sep 20 06:26:48 ika kernel: [ 377.878207] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:26:58 ika kernel: [ 387.861890] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:03 ika kernel: [ 392.981613] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:08 ika kernel: [ 398.101448] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:14 ika kernel: [ 403.221267] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:19 ika kernel: [ 408.341117] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:24 ika kernel: [ 413.460845] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:27 ika systemd[1218]: pulseaudio.service: Start operation
timed out. Terminating.
Sep 20 06:27:29 ika kernel: [ 418.580714] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:34 ika kernel: [ 423.700407] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:39 ika kernel: [ 428.824229] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:27:44 ika kernel: [ 433.939955] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:28:57 ika systemd[1218]: pulseaudio.service: State
'stop-sigterm' timed out. Killing.
Sep 20 06:28:57 ika systemd[1218]: pulseaudio.service: Killing process
1299 (pulseaudio) with signal SIGKILL.
Sep 20 06:29:01 ika systemd[1218]: pulseaudio.service: Main process
exited, code=killed, status=9/KILL
Sep 20 06:29:01 ika systemd[1218]: pulseaudio.service: Failed with
result 'timeout'.
Sep 20 06:29:01 ika systemd[1218]: Failed to start Sound Service.
Sep 20 06:29:01 ika systemd[1218]: pulseaudio.service: Service
RestartSec=100ms expired, scheduling restart.
Sep 20 06:29:01 ika systemd[1218]: pulseaudio.service: Scheduled
restart job, restart counter is at 1.
Sep 20 06:29:01 ika systemd[1218]: Stopped Sound Service.
Sep 20 06:29:01 ika systemd[1218]: Starting Sound Service...
Sep 20 06:29:01 ika rtkit-daemon[1317]: Successfully made thread 2003
of process 2003 (n/a) owned by '2000' high priority at nice level -11.
Sep 20 06:29:01 ika rtkit-daemon[1317]: Supervising 1 threads of 1
processes of 1 users.
Sep 20 06:29:01 ika pulseaudio[2003]: W: [pulseaudio] pid.c: Stale PID
file, overwriting.
Sep 20 06:29:27 ika kernel: [ 536.336774] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:29:32 ika kernel: [ 541.456984] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:29:37 ika kernel: [ 546.577075] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:29:42 ika kernel: [ 551.697157] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:29:47 ika kernel: [ 556.817134] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:29:57 ika kernel: [ 567.057308] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:02 ika kernel: [ 572.177406] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:08 ika kernel: [ 577.297385] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:13 ika kernel: [ 582.417419] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:18 ika kernel: [ 587.537429] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:28 ika kernel: [ 597.777480] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:30:32 ika systemd[1218]: pulseaudio.service: Start operation
timed out. Terminating.
dmesg after plugging in webcam:
[ 2159.761987] usb 1-1.1: new full-speed USB device number 3 using
ehci-pci
[ 2160.064615] usb 1-1.1: New USB device found, idVendor=04cc,
idProduct=8116, bcdDevice= 0.00
[ 2160.064618] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[ 2160.064620] usb 1-1.1: SerialNumber: 0168000000000000
[ 2160.640895] media: Linux media interface: v0.10
[ 2160.650087] videodev: Linux video capture interface: v2.00
[ 2160.660717] pwc: Sotec Afina Eye USB webcam detected.
[ 2160.896149] pwc: Registered as video0.
[ 2160.896213] input: PWC snapshot button as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/input/input13
[ 2160.896405] usbcore: registered new interface driver Philips webcam
[ 2165.993136] usbcore: registered new interface driver snd-usb-audio
-- Package-specific info:
** Version:
Linux version 4.19.0-17-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.194-3 (2021-07-18)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-17-amd64 root=UUID=07df0632-0ad3-4b48-8600-603a321ea592 ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
Copied from /var/log/kern.log:
Sep 20 06:20:50 ika kernel: [ 20.100602] pwc: Failed to set LED
on/off time (-110)
Sep 20 06:20:55 ika kernel: [ 25.220573] pwc: send_video_command
error -110
Sep 20 06:20:55 ika kernel: [ 25.220580] pwc: Failed to set video
mode VGA@30 fps; return code = -110
Sep 20 06:20:55 ika kernel: [ 25.220594] Philips webcam: probe of
3-1.4:1.0 failed with error -110
Sep 20 06:20:55 ika kernel: [ 25.220660] usbcore: registered new
interface driver Philips webcam
Sep 20 06:21:26 ika kernel: [ 55.868872] usb 3-1.4: 2:1: cannot get
min/max values for control 2 (id 2)
Sep 20 06:21:26 ika kernel: [ 55.869215] usbcore: registered new
interface driver snd-usb-audio
Sep 20 06:21:31 ika kernel: [ 60.976715] usb 3-1.4: 2:1: cannot get
min/max values for control 2 (id 2)
Sep 20 06:21:36 ika kernel: [ 66.090176] usb 3-1.4: 2:1: cannot get
min/max values for control 2 (id 2)
Sep 20 06:21:47 ika kernel: [ 76.323999] usb 3-1.4: 2:1: cannot get
min/max values for control 2 (id 2)
Sep 20 06:21:52 ika kernel: [ 81.441964] usb 3-1.4: 2:1: cannot get
min/max values for control 2 (id 2)
Sep 20 06:26:02 ika kernel: [ 331.799386] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:26:07 ika kernel: [ 336.919167] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
Sep 20 06:26:12 ika kernel: [ 342.039175] usb 3-1.4: 2:1:
usb_set_interface failed (-110)
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq Elite 8300 SFF
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: K01 v02.83
board_vendor: Hewlett-Packard
board_name: 3397
board_version:
** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
intel_rapl
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
snd_hda_intel
kvm
snd_hda_codec
irqbypass
crct10dif_pclmul
snd_hda_core
crc32_pclmul
ghash_clmulni_intel
snd_hwdep
intel_cstate
mei_wdt
snd_pcm
tpm_infineon
efi_pstore
intel_uncore
mei_me
snd_timer
snd
intel_rapl_perf
tpm_tis
hp_wmi
tpm_tis_core
iTCO_wdt
mei
soundcore
serio_raw
tpm
iTCO_vendor_support
sg
sparse_keymap
rfkill
pcc_cpufreq
rng_core
wmi_bmof
evdev
efivars
pcspkr
parport_pc
ppdev
sunrpc
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sr_mod
cdrom
sd_mod
crc32c_intel
i915
ahci
libahci
libata
i2c_algo_bit
aesni_intel
drm_kms_helper
aes_x86_64
xhci_pci
crypto_simd
xhci_hcd
cryptd
i2c_i801
glue_helper
psmouse
scsi_mod
drm
lpc_ich
mfd_core
ehci_pci
ehci_hcd
usbcore
e1000e
usb_common
fan
thermal
wmi
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
Kernel modules: ie31200_edac
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [103c:3397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family USB xHCI Host Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family MEI Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7c3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family KT Controller [103c:3397]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f7c3a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Hewlett-Packard Company 82579LM Gigabit Network Connection (Lewisville) [103c:3397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB Enhanced Host Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family High Definition Audio Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB Enhanced Host Controller [103c:3397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Q77 Express Chipset LPC Controller [8086:1e47] (rev 04)
Subsystem: Hewlett-Packard Company Q77 Express Chipset LPC Controller [103c:3397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [103c:3397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family SMBus Controller [103c:3397]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.10
APT prefers oldstable-updates
APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-17-amd64 (SMP w/4 CPU cores)
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8), LANGUAGE=fi_FI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-17-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-17-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-17-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20+deb10u4
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-17-amd64 is related to:
ii firmware-amd-graphics 20190114-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: