--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.11-1-686-pae: [Regression] screen flickering with new kernel
- From: Dan Greene <dan-greene@wi.rr.com>
- Date: Thu, 24 Oct 2013 05:04:10 -0500
- Message-id: <20131024100410.4350.15759.reportbug@debian>
Package: src:linux
Version: 3.11.5-1
Severity: normal
Dear Maintainer,
After updating to the new kernel, my screen has been flickering. This is annoying at the console (especially now as I am
typing this parenthetical note), and makes the web browser pretty much unusable.
This was not a problem with the linux-image-3.10-3-686-pae kernel.
-- Package-specific info:
** Version:
Linux version 3.11-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.5-1 (2013-10-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-1-686-pae root=UUID=3b36aee6-78ed-44c3-be2f-158767f5c289 ro video=VGA-1:1024x768m@75Hz quiet
** Not tainted
** Kernel log:
[ 9.003294] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 9.004313] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[ 9.004851] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x01f000a5
[ 9.004856] nouveau [ DEVICE][0000:01:00.0] Chipset: nForce2 (NV1F)
[ 9.004860] nouveau [ DEVICE][0000:01:00.0] Family : NV10
[ 9.006221] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 9.037286] nouveau [ VBIOS][0000:01:00.0] ... checksum invalid
[ 9.037291] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 9.037306] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 9.037310] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 9.037313] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 9.037316] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
[ 9.041241] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 9.041246] nouveau [ VBIOS][0000:01:00.0] using image from PCIROM
[ 9.041250] nouveau [ VBIOS][0000:01:00.0] BMP version 5.15
[ 9.041432] nouveau [ VBIOS][0000:01:00.0] version 04.1f.00.07.00
[ 9.041447] nouveau W[ VBIOS][0000:01:00.0] unknown i2c type 3
[ 9.041523] nouveau W[ VBIOS][0000:01:00.0] unknown i2c type 3
[ 9.041814] nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq
[ 9.041827] nouveau [ PFB][0000:01:00.0] RAM type: stolen system memory
[ 9.041831] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 9.041834] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 9.046486] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge
[ 9.046504] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode
[ 9.046554] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 9.046652] [TTM] Zone kernel: Available graphics memory: 224412 kiB
[ 9.046655] [TTM] Initializing pool allocator
[ 9.046664] [TTM] Initializing DMA pool allocator
[ 9.046691] nouveau [ DRM] VRAM: 63 MiB
[ 9.046694] nouveau [ DRM] GART: 64 MiB
[ 9.046699] nouveau [ DRM] BMP version 5.21
[ 9.046703] nouveau [ DRM] DCB version 2.0
[ 9.046709] nouveau [ DRM] DCB outp 00: 01000100 000088b8
[ 9.046713] nouveau [ DRM] DCB outp 01: 02010210 000088b8
[ 9.047788] nouveau [ DRM] Saving VGA fonts
[ 9.095148] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.095154] [drm] No driver support for vblank timestamp query.
[ 9.115419] nouveau W[ DRM] Unknown memclock table version 0.
[ 9.115424] nouveau [ DRM] 0 available performance level(s)
[ 9.115429] nouveau [ DRM] c: core 200MHz memory 167045M
[ 9.117337] nouveau [ DRM] MM: using M2MF for buffer copies
[ 9.117359] parse error at position 13 in video mode '1024x768m@75Hz'
[ 9.172505] nouveau [ DRM] allocated 1024x768 fb: 0x9000, bo da443600
[ 9.172640] fbcon: nouveaufb (fb0) is primary device
[ 9.352023] Console: switching to colour frame buffer device 128x48
[ 9.353822] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 9.353827] nouveau 0000:01:00.0: registered panic notifier
[ 9.353834] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 9.424028] intel8x0_measure_ac97_clock: measured 54206 usecs (2632 samples)
[ 9.424034] intel8x0: clocking to 47451
[ 9.879368] cfg80211: Calling CRDA to update world regulatory domain
[ 10.188311] usb 1-2.4: reset high-speed USB device number 4 using ehci-pci
[ 10.289153] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 10.343410] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 10.384192] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.384747] usbcore: registered new interface driver rt2800usb
[ 11.468500] cfg80211: World regulatory domain updated:
[ 11.468508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.468512] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.468515] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.468519] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.468522] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.468525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.442155] Adding 997916k swap on /dev/sda3. Priority:-1 extents:1 across:997916k
[ 13.513345] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 13.946610] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 14.999167] fuse init (API version 7.22)
[ 16.161137] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
[ 16.170208] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 18.261931] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 18.279217] rt2800usb 1-2.4:1.0: firmware: agent loaded rt2870.bin into memory
[ 18.279223] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.17
[ 18.687110] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.776061] wlan0: authenticate with 00:0c:41:ac:0a:f7
[ 18.845401] wlan0: send auth to 00:0c:41:ac:0a:f7 (try 1/3)
[ 18.846901] wlan0: authenticated
[ 18.846928] rt2800usb 1-2.4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 18.846933] rt2800usb 1-2.4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 18.846936] rt2800usb 1-2.4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 18.848017] wlan0: associate with 00:0c:41:ac:0a:f7 (try 1/3)
[ 18.849889] wlan0: RX AssocResp from 00:0c:41:ac:0a:f7 (capab=0x411 status=0 aid=4)
[ 18.857009] wlan0: associated
[ 18.857119] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.922818] RPC: Registered named UNIX socket transport module.
[ 21.922825] RPC: Registered udp transport module.
[ 21.922827] RPC: Registered tcp transport module.
[ 21.922830] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.949292] FS-Cache: Loaded
[ 21.977547] FS-Cache: Netfs 'nfs' registered for caching
[ 22.091430] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.555872] lp0: using parport0 (interrupt-driven).
[ 26.561044] ppdev: user-space parallel port driver
[ 55.758807] Bluetooth: Core ver 2.16
[ 55.758851] NET: Registered protocol family 31
[ 55.758855] Bluetooth: HCI device and connection manager initialized
[ 55.759315] Bluetooth: HCI socket layer initialized
[ 55.759323] Bluetooth: L2CAP socket layer initialized
[ 55.759335] Bluetooth: SCO socket layer initialized
[ 55.832218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 55.832241] Bluetooth: HIDP socket layer initialized
** Model information
not available
** Loaded modules:
hidp
bluetooth
snd_hrtimer
ppdev
lp
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
lm85
hwmon_vid
fuse
dm_crypt
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
mac80211
cfg80211
crc_ccitt
rfkill
snd_intel8x0
nouveau
snd_ac97_codec
snd_pcm_oss
snd_mixer_oss
snd_pcm
mxm_wmi
snd_page_alloc
wmi
psmouse
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
video
snd_seq
snd_seq_device
snd_timer
ttm
snd
pcspkr
serio_raw
drm_kms_helper
drm
soundcore
i2c_algo_bit
evdev
ac97_bus
ohci_pci
ohci_hcd
mperf
processor
button
i2c_nforce2
i2c_core
parport_pc
parport
thermal_sys
shpchp
ext4
crc16
mbcache
jbd2
btrfs
xor
zlib_deflate
raid6_pq
crc32c
libcrc32c
dm_mod
nbd
hid_generic
usbhid
hid
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
pata_amd
3c59x
libata
mii
scsi_mod
floppy
ehci_pci
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: NVIDIA Corporation nForce2 IGP2 [10de:01e0] (rev a2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-nvidia
00:00.1 RAM memory [0500]: NVIDIA Corporation nForce2 Memory Controller 1 [10de:01eb] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: NVIDIA Corporation nForce2 Memory Controller 4 [10de:01ee] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: NVIDIA Corporation nForce2 Memory Controller 3 [10de:01ed] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: NVIDIA Corporation nForce2 Memory Controller 2 [10de:01ec] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.5 RAM memory [0500]: NVIDIA Corporation nForce2 Memory Controller 5 [10de:01ef] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: NVIDIA Corporation nForce2 ISA Bridge [10de:0060] (rev a4)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.1 SMBus [0c05]: NVIDIA Corporation nForce2 SMBus (MCP) [10de:0064] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2480 [size=32]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB controller [0c03]: NVIDIA Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
00:02.1 USB controller [0c03]: NVIDIA Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fc301000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
00:02.2 USB controller [0c03]: NVIDIA Corporation nForce2 USB Controller [10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 20
Region 0: Memory at fc303000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:06.0 Multimedia audio controller [0401]: NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 2400 [size=128]
Region 2: Memory at fc302000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:08.0 PCI bridge [0604]: NVIDIA Corporation nForce2 External PCI Bridge [10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:09.0 IDE interface [0101]: NVIDIA Corporation nForce2 IDE [10de:0065] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at 24a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:0c.0 PCI bridge [0604]: NVIDIA Corporation nForce2 PCI Bridge [10de:006d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=14, subordinate=14, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fc600000-fc8fffff
Prefetchable memory behind bridge: 1c100000-1c1fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1e.0 PCI bridge [0604]: NVIDIA Corporation nForce2 AGP [10de:01e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fd000000-fe1fffff
Prefetchable memory behind bridge: f8000000-fc2fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation C17 [GeForce4 MX IGP] [10de:01f0] (rev a3) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:12b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at fc200000 (32-bit, prefetchable) [size=512K]
Expansion ROM at fc000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
14:01.0 Ethernet controller [0200]: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] [10b7:9201] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:12b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 1000 [size=128]
Region 1: Memory at fc800000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 1c100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
** USB devices:
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (200, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.11-1-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.11-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-1-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-93
Versions of packages linux-image-3.11-1-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii extlinux 3:4.05+dfsg-6+deb7u3
ii grub-pc 2.00-19
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-1-686-pae/prerm/removing-running-kernel-3.11-1-686-pae: true
linux-image-3.11-1-686-pae/postinst/depmod-error-initrd-3.11-1-686-pae: false
--- End Message ---