[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#721871: marked as done (i915 backlight quirk needed for Lenovo Yoga 11s)



Your message dated Sat, 24 Apr 2021 11:29:37 -0700 (PDT)
with message-id <60846391.1c69fb81.d3e2a.574a@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #721871,
regarding i915 backlight quirk needed for Lenovo Yoga 11s
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
721871: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=721871
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.10.5-1
Severity: normal

The Lenovo Yoga 11s laptop boots to a black screen (backlight off)
when i915 loads. This is due to the common backlight control inversion
problem, and can be worked around with i915.invert_brightness=1

This should be enough information to add an entry for this laptop to the
intel_quirks table:

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core process
or Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Lenovo Device [17aa:3977]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 2000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

This affects both the kernel I'm running and the one in stable too.

-- Package-specific info:
** Version:
Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=8f9f53ff-f80d-468c-9310-892de8846629 ro quiet i915.invert_brightness=1

** Tainted: WCO (5632)
 * Taint on warning.
 * Module from drivers/staging has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[49876.205573] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[49876.205573] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[49882.218012] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[49882.218012] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[50050.562890] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[50050.562890] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[50056.566202] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[50056.566202] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[50311.082032] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[50311.082032] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[50335.121810] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[50335.121810] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[50515.221777] EXT2-fs (sdf): previous I/O error to superblock detected
[50515.221777] 
[50515.221793] EXT2-fs (sdf): error: ext2_readdir: bad page in #2
[50518.567000] EXT2-fs (sdf): previous I/O error to superblock detected
[50518.567000] 
[50518.567067] EXT2-fs (sdf): previous I/O error to superblock detected
[50518.567067] 
[50518.567093] EXT2-fs (sdf): previous I/O error to superblock detected
[50518.567093] 
[50551.844610] EXT2-fs (sde): previous I/O error to superblock detected
[50551.844610] 
[50551.844624] EXT2-fs (sde): error: ext2_readdir: bad page in #2
[50562.524764] EXT2-fs (sde): previous I/O error to superblock detected
[50562.524764] 
[50562.524776] EXT2-fs (sde): error: ext2_get_inode: unable to read inode block - inode=2, block=129
[50562.524796] EXT2-fs (sde): previous I/O error to superblock detected
[50562.524796] 
[50562.524845] EXT2-fs (sde): previous I/O error to superblock detected
[50562.524845] 
[50562.524878] EXT2-fs (sde): previous I/O error to superblock detected
[50562.524878] 
[50568.515687] EXT2-fs (sdd): previous I/O error to superblock detected
[50568.515687] 
[50568.515908] EXT2-fs (sdd): previous I/O error to superblock detected
[50568.515908] 
[50568.515940] EXT2-fs (sdd): previous I/O error to superblock detected
[50568.515940] 
[50571.209716] EXT2-fs (sdc): previous I/O error to superblock detected
[50571.209716] 
[50571.209762] EXT2-fs (sdc): previous I/O error to superblock detected
[50571.209762] 
[50571.209781] EXT2-fs (sdc): previous I/O error to superblock detected
[50571.209781] 
[50615.856235] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
[50616.598733] usb 1-1.2: New USB device found, idVendor=1058, idProduct=0730
[50616.598740] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[50616.598744] usb 1-1.2: Product: My Passport 0730
[50616.598747] usb 1-1.2: Manufacturer: Western Digital
[50616.598750] usb 1-1.2: SerialNumber: 575842314143305334373633
[50616.599318] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[50616.599629] scsi14 : usb-storage 1-1.2:1.0
[50618.668473] scsi 14:0:0:0: Direct-Access     WD       My Passport 0730 1012 PQ: 0 ANSI: 6
[50618.669586] scsi 14:0:0:1: Enclosure         WD       SES Device       1012 PQ: 0 ANSI: 6
[50618.670300] sd 14:0:0:0: Attached scsi generic sg2 type 0
[50618.670817] scsi 14:0:0:1: Attached scsi generic sg3 type 13
[50622.548050] sd 14:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[50622.549158] sd 14:0:0:0: [sdc] Write Protect is off
[50622.549167] sd 14:0:0:0: [sdc] Mode Sense: 47 00 10 08
[50622.550498] sd 14:0:0:0: [sdc] No Caching mode page present
[50622.550504] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[50622.554123] sd 14:0:0:0: [sdc] No Caching mode page present
[50622.554141] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[50622.571963]  sdc: sdc1
[50622.572682] ses 14:0:0:1: Attached Enclosure device
[50622.575850] sd 14:0:0:0: [sdc] No Caching mode page present
[50622.575856] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[50622.575861] sd 14:0:0:0: [sdc] Attached SCSI disk
[50623.036141] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[50623.040316] EXT4-fs (sdc1): recovery complete
[50623.044124] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[51170.789392] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51170.789392] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[51172.794278] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51172.794278] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[51222.894094] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51222.894094] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[51226.902492] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51226.902492] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[51403.261096] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51403.261096] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[51491.437140] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51491.437140] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[51569.679755] usb 1-1.2: USB disconnect, device number 14
[51569.967364] Buffer I/O error on device sdc1, logical block 121667584
[51569.967370] lost page write due to I/O error on sdc1
[51569.967374] JBD2: Error -5 detected when updating journal superblock for sdc1-8.
[51954.353400] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51954.353400] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[51960.365314] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[51960.365314] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[52014.473153] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[52014.473153] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[52020.486441] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[52020.486441] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0
[54066.569949] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[54066.569949] 	 ==> rssi_level:3, rate_bitmap:0x00000ff5
[54078.593237] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff
[54078.593237] 	 ==> rssi_level:2, rate_bitmap:0x00000ff0

** Model information
sys_vendor: LENOVO
product_name: 20246
product_version: Lenovo IdeaPad Yoga 11S
chassis_vendor: LENOVO
chassis_version: Lenovo IdeaPad Yoga 11S
bios_vendor: LENOVO
bios_version: 77CN19WW(V1.05)
board_vendor: LENOVO
board_name: Yoga2
board_version: 31900003Std

** Loaded modules:
ses
enclosure
8723au(O)
tun
sit
tunnel4
ip_tunnel
bnep
rfcomm
bluetooth
uinput
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
mac80211
cfg80211
crc_ccitt
cpuid
ext2
usb_storage
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
snd_hda_codec_hdmi
snd_hda_codec_conexant
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
hid_sensor_hub
videodev
media
joydev
hid_multitouch
hid_generic
usbhid
hid
coretemp
kvm_intel
kvm
crc32c_intel
ghash_clmulni_intel
cryptd
rts5139(C)
iTCO_wdt
iTCO_vendor_support
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
psmouse
serio_raw
microcode
evdev
snd
pcspkr
ideapad_laptop
sparse_keymap
rfkill
battery
efivars
wmi
i2c_i801
ac
i915
soundcore
mperf
video
lpc_ich
mfd_core
button
drm_kms_helper
drm
processor
i2c_algo_bit
mei_me
i2c_core
mei
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
thermal
thermal_sys
xhci_hcd
ahci
libahci
ehci_pci
ehci_hcd
libata
usbcore
scsi_mod
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 2000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at cfa08000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at e041c000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e0421000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at e0418000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 40
	Region 0: I/O ports at 2088 [size=8]
	Region 1: I/O ports at 2094 [size=4]
	Region 2: I/O ports at 2080 [size=8]
	Region 3: I/O ports at 2090 [size=4]
	Region 4: I/O ports at 2060 [size=32]
	Region 5: Memory at e041f000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at e041d000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 2040 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller [8086:1e24] (rev 04)
	Subsystem: Lenovo Device [17aa:3977]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at e041e000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>


** USB devices:
Bus 002 Device 005: ID 04f2:b35e Chicony Electronics Co., Ltd 
Bus 002 Device 004: ID 0bda:1724 Realtek Semiconductor Corp. 
Bus 002 Device 003: ID 2047:0855 Texas Instruments 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 03eb:8814 Atmel Corp. 
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.10-2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.50
ii  initramfs-tools [linux-initramfs-tool]  0.113
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.10-2-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.10-2-amd64 suggests:
pn  debian-kernel-handbook     <none>
pn  grub-pc | extlinux | lilo  <none>
pn  linux-doc-3.10             <none>

Versions of packages linux-image-3.10-2-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.40
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information excluded

-- 
see shy jo

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: