--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: blank screen (no signal) with KMS on RS400
- From: Michal Suchanek <michal.suchanek@ruk.cuni.cz>
- Date: Mon, 02 Sep 2013 19:00:41 +0200
- Message-id: <20130902170041.3395.35674.reportbug@test1.ruk.cuni.cz>
Package: src:linux
Version: 3.2.46-1+deb7u1
Severity: normal
Hello,
After installing and booting Debian Wheezy I see nothing on the attached monitor.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
** Command line:
initrd=/boot/initrd.img-3.2.0-4-amd64 root=UUID=6a0ad57f-9be4-4ed5-980e-85865aa9c49e ro quiet BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
** Not tainted
** Kernel log:
[ 4.803366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.803372] ACPI: Power Button [PWRF]
[ 4.853487] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.856438] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.856537] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.073126] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.387630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.428171] [drm] Initialized drm 1.1.0 20060810
[ 5.453095] Linux media interface: v0.10
[ 5.542301] Linux video capture interface: v2.00
[ 5.557438] IR NEC protocol handler initialized
[ 5.604154] IR RC5(x) protocol handler initialized
[ 5.858200] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.874078] IR RC6 protocol handler initialized
[ 5.998582] IR JVC protocol handler initialized
[ 6.181314] bttv: driver version 0.9.19 loaded
[ 6.181321] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 6.181561] bttv: Bt8xx card found (0)
[ 6.181600] bttv: 0: Bt878 (rev 17) at 0000:02:09.0, irq: 16, latency: 64, mmio: 0xfdeff000
[ 6.181626] bttv: 0: detected: Leadtek WinFast VC 100 [card=114], PCI subsystem ID is 107d:6607
[ 6.181630] bttv: 0: using: Winfast VC100 [card=114,autodetected]
[ 6.181803] bttv: 0: tuner absent
[ 6.181924] bttv: 0: registered device video0
[ 6.182016] bttv: 0: registered device vbi0
[ 6.182055] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[ 6.200773] [drm] radeon defaulting to kernel modesetting.
[ 6.200777] [drm] radeon kernel modesetting enabled.
[ 6.201229] [drm] initializing kernel modesetting (RS400 0x1002:0x5A41 0x1043:0x81C8).
[ 6.201261] [drm] register mmio base: 0xFDDF0000
[ 6.201263] [drm] register mmio size: 65536
[ 6.201382] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.201391] radeon 0000:01:05.0: VRAM: 256M 0x0000000030000000 - 0x000000003FFFFFFF (256M used)
[ 6.201395] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 6.201407] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.201410] [drm] Driver supports precise vblank timestamp query.
[ 6.201425] [drm] radeon: irq initialized.
[ 6.201838] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.201843] [drm] RAM width 128bits DDR
[ 6.201937] [TTM] Zone kernel: Available graphics memory: 382776 kiB
[ 6.201940] [TTM] Initializing pool allocator
[ 6.201948] [TTM] Initializing DMA pool allocator
[ 6.201992] [drm] radeon: 256M of VRAM memory ready
[ 6.201995] [drm] radeon: 512M of GTT memory ready.
[ 6.202027] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.228825] bttv: PLL set ok
[ 6.235435] [drm] radeon: ib pool ready.
[ 6.235538] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 6.245588] [drm] PCIE GART of 512M enabled (table at 0x000000002B600000).
[ 6.245732] radeon 0000:01:05.0: WB enabled
[ 6.245738] [drm] fence driver on ring 0 use gpu addr 0x40000000 and cpu addr 0xffff88002ccd5000
[ 6.246133] IR Sony protocol handler initialized
[ 6.247294] [drm] Loading R300 Microcode
[ 6.296123] IR MCE Keyboard/mouse protocol handler initialized
[ 6.341900] lirc_dev: IR Remote Control driver registered, major 249
[ 6.342989] IR LIRC bridge handler initialized
[ 6.422239] platform radeon_cp.0: firmware: agent loaded radeon/R300_cp.bin into memory
[ 6.422461] [drm] radeon: ring at 0x0000000040001000
[ 6.422483] [drm] ring test succeeded in 2 usecs
[ 6.422918] [drm] ib test succeeded in 0 usecs
[ 6.423198] [drm:radeon_add_legacy_connector] *ERROR* DVI: Failed to assign ddc bus! Check dmesg for i2c errors.
[ 6.423345] [drm] Radeon Display Connectors
[ 6.423348] [drm] Connector 0:
[ 6.423351] [drm] VGA
[ 6.423354] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 6.423356] [drm] Encoders:
[ 6.423358] [drm] CRT1: INTERNAL_DAC2
[ 6.423360] [drm] Connector 1:
[ 6.423362] [drm] DVI-D
[ 6.423364] [drm] HPD2
[ 6.423366] [drm] DDC: no ddc bus - possible BIOS bug - please report to xorg-driver-ati@lists.x.org
[ 6.423368] [drm] Encoders:
[ 6.423370] [drm] DFP2: INTERNAL_DVO1
[ 6.423372] [drm] Connector 2:
[ 6.423373] [drm] S-video
[ 6.423375] [drm] Encoders:
[ 6.423377] [drm] TV1: INTERNAL_DAC2
[ 6.434853] No connectors reported connected with modes
[ 6.434865] [drm] Cannot find any crtc or sizes - going 1024x768
[ 6.439105] [drm] fb mappable at 0xD0040000
[ 6.439107] [drm] vram apper at 0xD0000000
[ 6.439110] [drm] size 3145728
[ 6.439112] [drm] fb depth is 24
[ 6.439114] [drm] pitch is 4096
[ 6.439260] fbcon: radeondrmfb (fb0) is primary device
[ 6.445406] Console: switching to colour frame buffer device 128x48
[ 6.448887] fb0: radeondrmfb frame buffer device
[ 6.448890] drm: registered panic notifier
[ 6.448903] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
[ 7.359649] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k
[ 7.383105] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.651977] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.871773] loop: module loaded
[ 10.253407] RPC: Registered named UNIX socket transport module.
[ 10.253412] RPC: Registered udp transport module.
[ 10.253415] RPC: Registered tcp transport module.
[ 10.253417] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.311898] FS-Cache: Loaded
[ 10.381897] FS-Cache: Netfs 'nfs' registered for caching
[ 10.521468] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.536441] 8139too 0000:02:02.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: ATI-Xpress200
product_version: System Version
chassis_vendor: ASUS
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS P5R8L ACPI BIOS Revision 0701
board_vendor: ASUSTeK Computer INC.
board_name: P5R8L
board_version: 1.01
** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
ir_sony_decoder
radeon
bttv
snd_atiixp
btcx_risc
snd_ac97_codec
tveeprom
ir_jvc_decoder
ir_rc6_decoder
videobuf_dma_sg
snd_pcm
videobuf_core
snd_page_alloc
ir_rc5_decoder
ttm
v4l2_common
snd_timer
drm_kms_helper
ir_nec_decoder
videodev
v4l2_compat_ioctl32
media
rc_core
drm
power_supply
i2c_piix4
snd
ac97_bus
soundcore
i2c_algo_bit
i2c_core
pcspkr
psmouse
serio_raw
evdev
parport_pc
parport
shpchp
processor
button
ext4
crc16
jbd2
mbcache
usbhid
hid
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ata_generic
usb_storage
pata_atiixp
sata_sil
fan
thermal
thermal_sys
firewire_ohci
ohci_hcd
ehci_hcd
libata
scsi_mod
firewire_core
crc_itu_t
floppy
8139too
8139cp
mii
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge [1002:5a33] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:12.0 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI IXP SB400 Serial ATA Controller [1002:4379] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at fdf80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI IXP SB400 SMBus Controller [1002:4372] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:819b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at fe02b000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI IXP SB400 IDE Controller [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f900 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI IXP SB400 PCI-ISA Bridge [1002:4377]
Subsystem: ASUSTeK Computer Inc. Device [1043:2a26]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] nee ATI IXP SB400 AC'97 Audio Controller [1002:4370] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8195]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_atiixp
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS400 [Radeon Xpress 200] [1002:5a41] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at ee00 [size=256]
Region 2: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d600 [size=256]
Region 1: Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
02:09.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
Subsystem: LeadTek Research Inc. Device [107d:6607]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdeff000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: bttv
02:09.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Subsystem: LeadTek Research Inc. Device [107d:6607]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fdefe000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
02:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard [1043:808a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at df00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:0e.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at de00 [size=8]
Region 1: I/O ports at dd00 [size=8]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at db00 [size=8]
Region 4: I/O ports at da00 [size=8]
Region 5: I/O ports at d900 [size=16]
Kernel driver in use: serial
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 002 Device 002: ID 04a5:7003 Acer Peripherals Inc. (now BenQ Corp.)
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 2:4.05+dfsg-6+deb7u1
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---