--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: i915: display backlight brightness initially set to zero on boot
- From: Gedalya <gedalya@gedalya.net>
- Date: Mon, 16 Jul 2012 02:44:57 -0400
- Message-id: <20120716064457.4014.1432.reportbug@dml.gedalya.net>
Package: src
Version: 3.2.21-3
Severity: normal
Using an HP dm4t-1200 laptop.
The backlight is set to zero brightness as soon as the kernel begins to load.
In my case I can set the brightness higher by simply using the appropriate fn
key combination, but until then everything looks black.
It looks to me like the following is the fix:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7bd90909bbf9ce7c40e1da3d72b97b93839c188a
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=4dca20efb1a9c2efefc28ad2867e5d6c3f5e1955
found some discussion here
https://bbs.archlinux.org/viewtopic.php?id=131747
Attaching full boot sequence (dmesg)
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/dml_vg0-rootfs ro quiet
** Not tainted
** Kernel log:
[ 5.978749] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
[ 5.978883] Registered led device: hp::hddprotect
[ 5.978903] hp_accel: driver loaded
[ 5.980271] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6
[ 5.980381] usbcore: registered new interface driver uvcvideo
[ 5.980384] USB Video Class driver (1.1.1)
[ 6.094874] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.094881] i915 0000:00:02.0: setting latency timer to 64
[ 6.117705] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 6.134840] mtrr: no more MTRRs available
[ 6.134842] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.135164] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 6.135169] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.135170] [drm] Driver supports precise vblank timestamp query.
[ 6.135212] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.152416] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 6.201378] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[ 6.201436] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.201448] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 6.325998] cfg80211: World regulatory domain updated:
[ 6.326004] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.326009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.326014] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.326019] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.326023] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.326027] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.330792] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 6.426746] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.427412] cfg80211: Calling CRDA for country: US
[ 6.430876] cfg80211: Regulatory domain changed to country: US
[ 6.430879] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.430881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6.430883] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6.430885] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430887] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430889] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430891] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6.793394] fbcon: inteldrmfb (fb0) is primary device
[ 6.966140] Console: switching to colour frame buffer device 170x48
[ 6.969599] fb0: inteldrmfb frame buffer device
[ 6.969600] drm: registered panic notifier
[ 6.981524] acpi device:02: registered as cooling_device5
[ 6.981832] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.981889] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.982008] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.982105] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.982168] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6.982209] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.354925] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 7.434178] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.434447] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.434578] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.434691] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.119256] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 8.225987] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 8.290830] loop: module loaded
[ 9.127793] Adding 7811068k swap on /dev/mapper/dml_vg0-swap. Priority:-1 extents:1 across:7811068k
[ 9.403533] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.421715] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.229709] RPC: Registered named UNIX socket transport module.
[ 10.229715] RPC: Registered udp transport module.
[ 10.229719] RPC: Registered tcp transport module.
[ 10.229723] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.316307] FS-Cache: Loaded
[ 10.356271] FS-Cache: Netfs 'nfs' registered for caching
[ 10.363806] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.428285] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 13.164990] r8169 0000:01:00.0: eth0: link down
[ 13.166254] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.218473] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 13.218561] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 13.219138] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 13.219828] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.593237] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 14.770604] wlan0: authenticate with 68:7f:74:04:28:06 (try 1)
[ 14.772203] wlan0: authenticated
[ 14.772404] wlan0: associate with 68:7f:74:04:28:06 (try 1)
[ 14.776523] wlan0: RX AssocResp from 68:7f:74:04:28:06 (capab=0x411 status=0 aid=1)
[ 14.776528] wlan0: associated
[ 14.777021] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 14.777027] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 14.777030] ieee80211 phy0: changing basic rates failed: -22
[ 14.777033] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 14.777798] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.094181] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 15.557047] Bluetooth: Core ver 2.16
[ 15.557077] NET: Registered protocol family 31
[ 15.557080] Bluetooth: HCI device and connection manager initialized
[ 15.557083] Bluetooth: HCI socket layer initialized
[ 15.557086] Bluetooth: L2CAP socket layer initialized
[ 15.557096] Bluetooth: SCO socket layer initialized
[ 15.590654] Bluetooth: RFCOMM TTY layer initialized
[ 15.590664] Bluetooth: RFCOMM socket layer initialized
[ 15.590669] Bluetooth: RFCOMM ver 1.11
[ 15.614461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.614466] Bluetooth: BNEP filters: protocol multicast
[ 16.221272] lp: driver loaded but no devices found
[ 16.457822] ppdev: user-space parallel port driver
[ 25.599755] wlan0: no IPv6 routers present
[ 29.139461] fuse init (API version 7.17)
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dm4 Notebook PC
product_version: 058A120000242B10000020100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.26
board_vendor: Hewlett-Packard
board_name: 146A
board_version: 58.28
** Loaded modules:
fuse
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
cryptd
aes_x86_64
aes_generic
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext2
loop
snd_hda_codec_hdmi
snd_hda_codec_idt
arc4
brcmsmac
cordic
crc8
brcmutil
snd_hda_intel
i915
mac80211
snd_hda_codec
joydev
snd_hwdep
snd_pcm
snd_page_alloc
drm_kms_helper
uvcvideo
acpi_cpufreq
videodev
drm
hp_accel
lis3lv02d
v4l2_compat_ioctl32
hp_wmi
sparse_keymap
snd_seq
snd_seq_device
snd_timer
i2c_i801
media
cfg80211
rfkill
i2c_algo_bit
snd
psmouse
i2c_core
input_polldev
evdev
coretemp
serio_raw
pcspkr
mperf
battery
crc32c_intel
intel_ips
iTCO_wdt
iTCO_vendor_support
ac
video
soundcore
processor
power_supply
wmi
button
ext4
crc16
jbd2
mbcache
dm_mod
sr_mod
sd_mod
cdrom
crc_t10dif
fan
thermal
thermal_sys
ahci
libahci
libata
ehci_hcd
scsi_mod
usbcore
r8169
mii
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at b4406100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b4405c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at b4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b3400000-b43fffff
Prefetchable memory behind bridge: 00000000b0400000-00000000b13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: b2400000-b33fffff
Prefetchable memory behind bridge: 00000000b1400000-00000000b23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b4405800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 3048 [size=8]
Region 1: I/O ports at 305c [size=4]
Region 2: I/O ports at 3040 [size=8]
Region 3: I/O ports at 3058 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at b4405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at b4406000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at b4404000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at b0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at b0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:145c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 138a:0005 Validity Sensors, Inc. VFS301 Fingerprint Reader
Bus 002 Device 003: ID 10f1:1a28 Importek
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.106
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.36
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.36
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/dml_vg0-rootfs ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
[ 0.000000] BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
[ 0.000000] BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
[ 0.000000] BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000017c000000 (usable)
[ 0.000000] BIOS-e820: 000000017c000000 - 0000000180000000 (reserved)
[ 0.000000] BIOS-e820: 0000000180000000 - 00000001dc000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm4 Notebook PC /146A, BIOS F.26 02/14/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1dc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 1DC000000 mask FFC000000 uncachable
[ 0.000000] 7 base 1E0000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000009b800000
[ 0.000000] 0000000000 - 009b800000 page 2M
[ 0.000000] kernel direct mapping tables up to 9b800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001dc000000
[ 0.000000] 0100000000 - 01dc000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1dc000000 @ 9b636000-9b63f000
[ 0.000000] RAMDISK: 36ad6000 - 37563000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000009b7fe120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e9000 0FAA0 (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75e000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001dc000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001dc000000
[ 0.000000] NODE_DATA [00000001dbffb000 - 00000001dbffffff]
[ 0.000000] [ffffea0000000000-ffffea00069fffff] PMD -> [ffff8801d5600000-ffff8801dabfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001dc000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009b63f
[ 0.000000] 0: 0x0009b7ff -> 0x0009b800
[ 0.000000] 0: 0x00100000 -> 0x0017c000
[ 0.000000] 0: 0x00180000 -> 0x001dc000
[ 0.000000] On node 0 totalpages: 1521101
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 618104 pages, LIFO batch:31
[ 0.000000] Normal zone: 12320 pages used for memmap
[ 0.000000] Normal zone: 872416 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
[ 0.000000] PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
[ 0.000000] PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
[ 0.000000] PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 000000017c000000 - 0000000180000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801dbc00000 s82816 r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1494440
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/dml_vg0-rootfs ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5910052k/7798784k available (3409k kernel code, 1714380k absent, 174352k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2526.689 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.37 BogoMIPS (lpj=10106756)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000041] Security Framework initialized
[ 0.000046] AppArmor: AppArmor disabled by boot time parameter
[ 0.000566] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002932] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004011] Mount-cache hash table entries: 256
[ 0.004128] Initializing cgroup subsys cpuacct
[ 0.004132] Initializing cgroup subsys memory
[ 0.004146] Initializing cgroup subsys devices
[ 0.004149] Initializing cgroup subsys freezer
[ 0.004150] Initializing cgroup subsys net_cls
[ 0.004152] Initializing cgroup subsys blkio
[ 0.004158] Initializing cgroup subsys perf_event
[ 0.004184] CPU: Physical Processor ID: 0
[ 0.004185] CPU: Processor Core ID: 0
[ 0.004190] mce: CPU supports 9 MCE banks
[ 0.004201] CPU0: Thermal monitoring enabled (TM1)
[ 0.004208] using mwait in idle threads.
[ 0.004571] ACPI: Core revision 20110623
[ 0.030865] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070522] CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05
[ 0.175637] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.175644] ... version: 3
[ 0.175645] ... bit width: 48
[ 0.175646] ... generic registers: 4
[ 0.175647] ... value mask: 0000ffffffffffff
[ 0.175649] ... max period: 000000007fffffff
[ 0.175650] ... fixed-purpose events: 3
[ 0.175651] ... event mask: 000000070000000f
[ 0.175896] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.176004] Booting Node 0, Processors #1
[ 0.176006] smpboot cpu 1: start_ip = 98000
[ 0.283736] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.283855] #2
[ 0.283856] smpboot cpu 2: start_ip = 98000
[ 0.391664] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.391783] #3
[ 0.391785] smpboot cpu 3: start_ip = 98000
[ 0.499582] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.499618] Brought up 4 CPUs
[ 0.499620] Total of 4 processors activated (20215.04 BogoMIPS).
[ 0.502117] devtmpfs: initialized
[ 0.505546] PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes)
[ 0.505719] print_constraints: dummy:
[ 0.505779] NET: Registered protocol family 16
[ 0.505869] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.505871] ACPI: bus type pci registered
[ 0.505952] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.505954] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.527550] PCI: Using configuration type 1 for base access
[ 0.528257] bio: create slab <bio-0> at 0
[ 0.528353] ACPI: Added _OSI(Module Device)
[ 0.528356] ACPI: Added _OSI(Processor Device)
[ 0.528357] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.528359] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.530262] ACPI: EC: Look up EC in DSDT
[ 0.532076] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.555490] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.561255] ACPI: SSDT 000000009b691a18 004C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.561712] ACPI: Dynamic OEM Table Load:
[ 0.561714] ACPI: SSDT (null) 004C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.561902] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.562362] ACPI: Dynamic OEM Table Load:
[ 0.562364] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.587773] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.588288] ACPI: Dynamic OEM Table Load:
[ 0.588290] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.599590] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.600056] ACPI: Dynamic OEM Table Load:
[ 0.600058] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.627230] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.271263] ACPI: Interpreter enabled
[ 1.271267] ACPI: (supports S0 S3 S4 S5)
[ 1.271303] ACPI: Using IOAPIC for interrupt routing
[ 1.272177] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.323978] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.325823] ACPI: Power Resource [FN00] (on)
[ 1.326267] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.326489] ACPI: No dock devices found.
[ 1.326491] HEST: Table not found.
[ 1.326493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.326906] \_SB_.PCI0:_OSC invalid UUID
[ 1.326908] _OSC request data:1 8 1f
[ 1.326911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.327618] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.327620] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.327622] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.327624] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
[ 1.327636] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 1.327652] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 1.327672] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 1.327681] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit]
[ 1.327687] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.327691] pci 0000:00:02.0: reg 20: [io 0x3050-0x3057]
[ 1.327748] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 1.327774] pci 0000:00:16.0: reg 10: [mem 0xb4406100-0xb440610f 64bit]
[ 1.327865] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.327869] pci 0000:00:16.0: PME# disabled
[ 1.327902] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 1.328163] pci 0000:00:1a.0: reg 10: [mem 0xb4405c00-0xb4405fff]
[ 1.329645] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.329648] pci 0000:00:1a.0: PME# disabled
[ 1.329671] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 1.329685] pci 0000:00:1b.0: reg 10: [mem 0xb4400000-0xb4403fff 64bit]
[ 1.329746] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.329750] pci 0000:00:1b.0: PME# disabled
[ 1.329769] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.329834] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.329837] pci 0000:00:1c.0: PME# disabled
[ 1.329857] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 1.329922] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.329925] pci 0000:00:1c.1: PME# disabled
[ 1.329956] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.330204] pci 0000:00:1d.0: reg 10: [mem 0xb4405800-0xb4405bff]
[ 1.331675] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.331679] pci 0000:00:1d.0: PME# disabled
[ 1.331699] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.331763] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 1.331881] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 1.331903] pci 0000:00:1f.2: reg 10: [io 0x3048-0x304f]
[ 1.331913] pci 0000:00:1f.2: reg 14: [io 0x305c-0x305f]
[ 1.331922] pci 0000:00:1f.2: reg 18: [io 0x3040-0x3047]
[ 1.331930] pci 0000:00:1f.2: reg 1c: [io 0x3058-0x305b]
[ 1.331939] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 1.331948] pci 0000:00:1f.2: reg 24: [mem 0xb4405000-0xb44057ff]
[ 1.331998] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.332001] pci 0000:00:1f.2: PME# disabled
[ 1.332021] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.332034] pci 0000:00:1f.3: reg 10: [mem 0xb4406000-0xb44060ff 64bit]
[ 1.332054] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 1.332089] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 1.332109] pci 0000:00:1f.6: reg 10: [mem 0xb4404000-0xb4404fff 64bit]
[ 1.332235] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 1.332250] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.332276] pci 0000:01:00.0: reg 18: [mem 0xb0404000-0xb0404fff 64bit pref]
[ 1.332293] pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 1.332363] pci 0000:01:00.0: supports D1 D2
[ 1.332365] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332369] pci 0000:01:00.0: PME# disabled
[ 1.339121] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.339127] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.339134] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 1.339142] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.339248] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 1.339271] pci 0000:02:00.0: reg 10: [mem 0xb2400000-0xb2403fff 64bit]
[ 1.339389] pci 0000:02:00.0: supports D1 D2
[ 1.347144] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.347150] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.347156] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 1.347165] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.347225] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 1.347236] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.347238] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.347240] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.347242] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 1.347257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.347486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.347584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.347631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.347738] \_SB_.PCI0:_OSC invalid UUID
[ 1.347739] _OSC request data:1 1f 1f
[ 1.347742] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.347779] \_SB_.PCI0:_OSC invalid UUID
[ 1.347780] _OSC request data:1 0 1d
[ 1.347783] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.347784] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.353930] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.354010] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 1.354028] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 1.354045] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 1.354061] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 1.354076] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 1.354092] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 1.354121] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 1.354123] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.354124] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.354372] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.354419] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.354466] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.354514] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.354560] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.354606] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.354652] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.354699] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.354801] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.354809] vgaarb: loaded
[ 1.354810] vgaarb: bridge control possible 0000:00:02.0
[ 1.354845] PCI: Using ACPI for IRQ routing
[ 1.362942] PCI: pci_cache_line_size set to 64 bytes
[ 1.363030] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 1.363032] reserve RAM buffer: 000000009b63f000 - 000000009bffffff
[ 1.363035] reserve RAM buffer: 000000009b800000 - 000000009bffffff
[ 1.363151] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.363156] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.365170] Switching to clocksource hpet
[ 1.366889] pnp: PnP ACPI init
[ 1.366903] ACPI: bus type pnp registered
[ 1.367287] pnp 00:00: [bus 00-fe]
[ 1.367289] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.367291] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.367293] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.367295] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.367297] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.367299] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.367300] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.367302] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.367304] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.367306] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.367307] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.367309] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.367311] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.367312] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.367314] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.367316] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.367319] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.367321] pnp 00:00: [mem 0xa0000000-0xfeafffff window]
[ 1.367322] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.367390] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.367432] pnp 00:01: [io 0x0000-0x001f]
[ 1.367433] pnp 00:01: [io 0x0081-0x0091]
[ 1.367435] pnp 00:01: [io 0x0093-0x009f]
[ 1.367436] pnp 00:01: [io 0x00c0-0x00df]
[ 1.367439] pnp 00:01: [dma 4]
[ 1.367463] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.367473] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.367496] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.367591] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.367617] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.367627] pnp 00:04: [io 0x00f0]
[ 1.367637] pnp 00:04: [irq 13]
[ 1.367662] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.367672] pnp 00:05: [io 0x002e-0x002f]
[ 1.367674] pnp 00:05: [io 0x004e-0x004f]
[ 1.367675] pnp 00:05: [io 0x0061]
[ 1.367677] pnp 00:05: [io 0x0063]
[ 1.367678] pnp 00:05: [io 0x0065]
[ 1.367680] pnp 00:05: [io 0x0067]
[ 1.367681] pnp 00:05: [io 0x0070]
[ 1.367682] pnp 00:05: [io 0x0080]
[ 1.367684] pnp 00:05: [io 0x0092]
[ 1.367685] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.367686] pnp 00:05: [io 0x0680-0x069f]
[ 1.367688] pnp 00:05: [io 0x0800-0x080f]
[ 1.367689] pnp 00:05: [io 0xffff]
[ 1.367690] pnp 00:05: [io 0xffff]
[ 1.367692] pnp 00:05: [io 0x0400-0x047f]
[ 1.367693] pnp 00:05: [io 0x0500-0x0501]
[ 1.367694] pnp 00:05: [io 0x0700-0x077f]
[ 1.367696] pnp 00:05: [io 0x164e-0x164f]
[ 1.367707] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 1.367749] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.367751] system 00:05: [io 0x0800-0x080f] has been reserved
[ 1.367753] system 00:05: [io 0xffff] has been reserved
[ 1.367755] system 00:05: [io 0xffff] has been reserved
[ 1.367757] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.367760] system 00:05: [io 0x0500-0x0501] has been reserved
[ 1.367762] system 00:05: [io 0x0700-0x077f] has been reserved
[ 1.367764] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.367776] pnp 00:06: [io 0x0070-0x0077]
[ 1.367782] pnp 00:06: [irq 8]
[ 1.367806] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.367816] pnp 00:07: [io 0x0060]
[ 1.367818] pnp 00:07: [io 0x0064]
[ 1.367823] pnp 00:07: [irq 1]
[ 1.367847] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.367858] pnp 00:08: [irq 12]
[ 1.367885] pnp 00:08: Plug and Play ACPI device, IDs SYN1e21 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.368003] pnp 00:09: [irq 23]
[ 1.368045] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.368251] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.368253] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 1.368255] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.368256] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.368258] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.368259] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.368261] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.368263] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 1.368264] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.368266] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.368267] pnp 00:0a: [mem 0xb4500000-0xb4500fff]
[ 1.368325] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.368328] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.368330] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.368332] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.368334] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.368337] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.368339] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.368341] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.368344] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.368346] system 00:0a: [mem 0xb4500000-0xb4500fff] has been reserved
[ 1.368348] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.368579] pnp 00:0b: [bus ff]
[ 1.368626] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.368649] pnp: PnP ACPI: found 12 devices
[ 1.368650] ACPI: ACPI bus type pnp unregistered
[ 1.375210] PCI: max bus depth: 1 pci_try_num: 2
[ 1.375234] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.375237] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.375241] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 1.375245] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.375250] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.375253] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.375257] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 1.375261] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.375267] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 1.375288] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.375292] pci 0000:00:1c.0: setting latency timer to 64
[ 1.375301] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.375304] pci 0000:00:1c.1: setting latency timer to 64
[ 1.375310] pci 0000:00:1e.0: setting latency timer to 64
[ 1.375314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.375315] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.375317] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.375319] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.375320] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.375322] pci_bus 0000:01: resource 1 [mem 0xb3400000-0xb43fffff]
[ 1.375324] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.375326] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.375327] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb33fffff]
[ 1.375329] pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.375331] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.375332] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.375334] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.375336] pci_bus 0000:03: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.375398] NET: Registered protocol family 2
[ 1.375596] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.376658] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.378900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.379169] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.379171] TCP reno registered
[ 1.379187] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.379231] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.379391] NET: Registered protocol family 1
[ 1.379409] pci 0000:00:02.0: Boot video device
[ 1.379426] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.393136] pci 0000:00:1a.0: PCI INT A disabled
[ 1.393175] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.409116] pci 0000:00:1d.0: PCI INT A disabled
[ 1.409192] PCI: CLS 64 bytes, default 64
[ 1.409240] Unpacking initramfs...
[ 1.601122] Freeing initrd memory: 10804k freed
[ 1.603471] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.603476] Placing 64MB software IO TLB between ffff880097636000 - ffff88009b636000
[ 1.603478] software IO TLB at phys 0x97636000 - 0x9b636000
[ 1.603496] Simple Boot Flag at 0x44 set to 0x1
[ 1.604021] audit: initializing netlink socket (disabled)
[ 1.604033] type=2000 audit(1342419583.432:1): initialized
[ 1.627375] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.649473] VFS: Disk quotas dquot_6.5.2
[ 1.649505] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.649578] msgmni has been set to 11564
[ 1.649724] alg: No test for stdrng (krng)
[ 1.649756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.649758] io scheduler noop registered
[ 1.649760] io scheduler deadline registered
[ 1.649776] io scheduler cfq registered (default)
[ 1.649955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.649978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.649980] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.650411] intel_idle: MWAIT substates: 0x1120
[ 1.650412] intel_idle: v0.4 model 0x25
[ 1.650413] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.650458] ERST: Table is not found!
[ 1.650459] GHES: HEST is not enabled!
[ 1.650519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.849286] Linux agpgart interface v0.103
[ 1.849351] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.849427] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.850118] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.850274] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
[ 1.850401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.853635] i8042: Detected active multiplexing controller, rev 1.1
[ 1.856526] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.856534] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.856564] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.856584] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.856607] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.856719] mousedev: PS/2 mouse device common for all mice
[ 1.856764] rtc_cmos 00:06: RTC can wake from S4
[ 1.856892] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.856920] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.856992] cpuidle: using governor ladder
[ 1.857065] cpuidle: using governor menu
[ 1.857240] TCP cubic registered
[ 1.857371] NET: Registered protocol family 10
[ 1.857947] Mobile IPv6
[ 1.857949] NET: Registered protocol family 17
[ 1.857953] Registering the dns_resolver key type
[ 1.858167] PM: Hibernation image not present or could not be loaded.
[ 1.858179] registered taskstats version 1
[ 1.869670] rtc_cmos 00:06: setting system clock to 2012-07-16 06:19:44 UTC (1342419584)
[ 1.869728] Initializing network drop monitor service
[ 1.870844] Freeing unused kernel memory: 572k freed
[ 1.870924] Write protecting the kernel read-only data: 6144k
[ 1.873486] Freeing unused kernel memory: 668k freed
[ 1.875929] Freeing unused kernel memory: 684k freed
[ 1.893677] udevd[57]: starting version 175
[ 1.893917] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.916411] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.916440] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.916476] r8169 0000:01:00.0: setting latency timer to 64
[ 1.916532] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 1.917040] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000c78000, 64:31:50:7f:4d:5b, XID 083000c0 IRQ 40
[ 1.917044] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.917683] usbcore: registered new interface driver usbfs
[ 1.917713] usbcore: registered new interface driver hub
[ 1.931858] SCSI subsystem initialized
[ 1.934760] usbcore: registered new device driver usb
[ 1.935342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.935377] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.935405] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.935409] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.935438] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.935474] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.939412] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.942795] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
[ 1.946837] libata version 3.00 loaded.
[ 1.956811] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.956865] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.956868] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.956871] usb usb1: Product: EHCI Host Controller
[ 1.956872] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.956874] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.957027] hub 1-0:1.0: USB hub found
[ 1.957034] hub 1-0:1.0: 3 ports detected
[ 1.957140] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.957182] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.957186] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.957197] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.957231] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.961159] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.961184] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb4405800
[ 1.976793] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.976828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.976831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.976833] usb usb2: Product: EHCI Host Controller
[ 1.976835] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.976837] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.977181] hub 2-0:1.0: USB hub found
[ 1.977193] hub 2-0:1.0: 3 ports detected
[ 1.977580] ahci 0000:00:1f.2: version 3.0
[ 1.977604] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.977660] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.977729] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 1.977734] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.977740] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.993591] scsi0 : ahci
[ 1.993771] scsi1 : ahci
[ 1.993928] scsi2 : ahci
[ 1.994079] scsi3 : ahci
[ 1.994227] scsi4 : ahci
[ 1.994440] ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 41
[ 1.994443] ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 41
[ 1.994444] ata3: DUMMY
[ 1.994445] ata4: DUMMY
[ 1.994448] ata5: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405300 irq 41
[ 2.156816] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.156821] ACPI: Thermal Zone [TZ00] (56 C)
[ 2.208813] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.208817] ACPI: Thermal Zone [TZ01] (44 C)
[ 2.256761] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.256765] ACPI: Thermal Zone [TZ02] (0 C)
[ 2.256906] ACPI: Fan [FAN0] (on)
[ 2.268706] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.312688] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.312715] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.312735] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.315078] ata1.00: ATA-8: WDC WD5000BEKT-60KA9T0, 01.01A01, max UDMA/133
[ 2.315083] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.317612] ata1.00: configured for UDMA/133
[ 2.317963] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEKT-6 01.0 PQ: 0 ANSI: 5
[ 2.324025] ata2.00: ATAPI: hp CDDVDW TS-U633J, HH00, max UDMA/100
[ 2.336685] ata2.00: configured for UDMA/100
[ 2.340058] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-U633J HH00 PQ: 0 ANSI: 5
[ 2.344354] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.344418] sd 0:0:0:0: [sda] Write Protect is off
[ 2.344420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.344433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353229] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.353233] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.353525] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.400004] sda: sda1 sda2 sda3 sda4
[ 2.400763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.400915] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.400921] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.401263] hub 1-1:1.0: USB hub found
[ 2.401533] hub 1-1:1.0: 6 ports detected
[ 2.512558] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.600519] Refined TSC clocksource calibration: 2527.001 MHz.
[ 2.600527] Switching to clocksource tsc
[ 2.649097] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.649103] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.649565] hub 2-1:1.0: USB hub found
[ 2.649638] hub 2-1:1.0: 8 ports detected
[ 2.720679] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
[ 2.814184] usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005
[ 2.814190] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.814194] usb 1-1.4: SerialNumber: 2421f0fd2100
[ 2.920559] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 3.033748] usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a28
[ 3.033754] usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.033759] usb 2-1.6: Product: HP Webcam
[ 3.033762] usb 2-1.6: Manufacturer: Importek
[ 3.146836] device-mapper: uevent: version 1.0.3
[ 3.146951] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.504889] PM: Starting manual resume from disk
[ 3.504895] PM: Hibernation image partition 254:1 present
[ 3.504898] PM: Looking for hibernation image.
[ 3.505158] PM: Image not found (code -22)
[ 3.505162] PM: Hibernation image not present or could not be loaded.
[ 3.531670] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.521831] udevd[342]: starting version 175
[ 4.926330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.926408] ACPI: Lid Switch [LID0]
[ 4.926465] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.926471] ACPI: Power Button [PWRB]
[ 4.926534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.926538] ACPI: Power Button [PWRF]
[ 5.045391] wmi: Mapper loaded
[ 5.085990] ACPI: Requesting acpi_cpufreq
[ 5.159329] ACPI: AC Adapter [AC] (on-line)
[ 5.191134] iTCO_vendor_support: vendor-support=0
[ 5.194368] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.194470] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 5.194770] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.226702] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 5.226740] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.226792] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 5.226880] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 5.268761] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.489942] cfg80211: Calling CRDA to update world regulatory domain
[ 5.813560] Linux media interface: v0.10
[ 5.858993] ACPI: Battery Slot [BAT0] (battery present)
[ 5.860624] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 5.860631] ACPI: resource 0000:00:1f.3 [io 0x3000-0x301f] conflicts with ACPI region SMBI [io 0x3000-0x300f]
[ 5.860633] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.936957] hp_accel: laptop model unknown, using default axes configuration
[ 5.937598] lis3lv02d: 8 bits sensor found
[ 5.959288] [drm] Initialized drm 1.1.0 20060810
[ 5.960928] Linux video capture interface: v2.00
[ 5.972334] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28)
[ 5.978749] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
[ 5.978883] Registered led device: hp::hddprotect
[ 5.978903] hp_accel: driver loaded
[ 5.980271] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6
[ 5.980381] usbcore: registered new interface driver uvcvideo
[ 5.980384] USB Video Class driver (1.1.1)
[ 6.094874] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.094881] i915 0000:00:02.0: setting latency timer to 64
[ 6.117705] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 6.134840] mtrr: no more MTRRs available
[ 6.134842] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.135164] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 6.135169] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.135170] [drm] Driver supports precise vblank timestamp query.
[ 6.135212] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.152416] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 6.201378] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[ 6.201436] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.201448] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 6.325998] cfg80211: World regulatory domain updated:
[ 6.326004] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.326009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.326014] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.326019] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.326023] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.326027] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.330792] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 6.426746] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.427412] cfg80211: Calling CRDA for country: US
[ 6.430876] cfg80211: Regulatory domain changed to country: US
[ 6.430879] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.430881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6.430883] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6.430885] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430887] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430889] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.430891] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6.793394] fbcon: inteldrmfb (fb0) is primary device
[ 6.966140] Console: switching to colour frame buffer device 170x48
[ 6.969599] fb0: inteldrmfb frame buffer device
[ 6.969600] drm: registered panic notifier
[ 6.981524] acpi device:02: registered as cooling_device5
[ 6.981832] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.981889] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.982008] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.982105] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.982168] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6.982209] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.354925] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 7.434178] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.434447] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.434578] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.434691] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.119256] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 8.225987] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 8.290830] loop: module loaded
[ 9.127793] Adding 7811068k swap on /dev/mapper/dml_vg0-swap. Priority:-1 extents:1 across:7811068k
[ 9.403533] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.421715] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.229709] RPC: Registered named UNIX socket transport module.
[ 10.229715] RPC: Registered udp transport module.
[ 10.229719] RPC: Registered tcp transport module.
[ 10.229723] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.316307] FS-Cache: Loaded
[ 10.356271] FS-Cache: Netfs 'nfs' registered for caching
[ 10.363806] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.428285] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 13.164990] r8169 0000:01:00.0: eth0: link down
[ 13.166254] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.218473] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 13.218561] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 13.219138] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 13.219828] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.593237] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 14.770604] wlan0: authenticate with 68:7f:74:04:28:06 (try 1)
[ 14.772203] wlan0: authenticated
[ 14.772404] wlan0: associate with 68:7f:74:04:28:06 (try 1)
[ 14.776523] wlan0: RX AssocResp from 68:7f:74:04:28:06 (capab=0x411 status=0 aid=1)
[ 14.776528] wlan0: associated
[ 14.777021] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 14.777027] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 14.777030] ieee80211 phy0: changing basic rates failed: -22
[ 14.777033] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 14.777798] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.094181] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 15.557047] Bluetooth: Core ver 2.16
[ 15.557077] NET: Registered protocol family 31
[ 15.557080] Bluetooth: HCI device and connection manager initialized
[ 15.557083] Bluetooth: HCI socket layer initialized
[ 15.557086] Bluetooth: L2CAP socket layer initialized
[ 15.557096] Bluetooth: SCO socket layer initialized
[ 15.590654] Bluetooth: RFCOMM TTY layer initialized
[ 15.590664] Bluetooth: RFCOMM socket layer initialized
[ 15.590669] Bluetooth: RFCOMM ver 1.11
[ 15.614461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.614466] Bluetooth: BNEP filters: protocol multicast
[ 16.221272] lp: driver loaded but no devices found
[ 16.457822] ppdev: user-space parallel port driver
[ 25.599755] wlan0: no IPv6 routers present
[ 29.139461] fuse init (API version 7.17)
--- End Message ---