--- Begin Message ---
Package: src:linux
Version: 4.19.37-5+deb10u2
Severity: normal
Dear Maintainer,
The Cavium PTP coprocess as PTP clock driver is rarely if ever
present on x86 systems, yet the Debian kernel config has it enabled.
Noticed this as driver in /sys/bus/pci/drivers on a standard x86 server.
The fix is simple, since this is a PCI device and can be built as
a module, just change the kernel config to build as module.
CONFIG_CAVIUM_PTP=m
-- Package-specific info:
** Version:
Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=ae541fd6-fbff-48ce-ba8b-57840d9992d0 ro quiet
** Not tainted
** Kernel log:
[ 14.102093] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 14.102134] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 14.102998] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.120054] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.139416] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 14.139418] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 14.139419] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 14.139420] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 14.152308] EFI Variables Facility v0.08 2004-May-17
[ 14.159835] pstore: Registered efi as persistent store backend
[ 14.160040] systemd-journald[420]: Received request to flush runtime journal from PID 1
[ 14.171072] Loading iSCSI transport class v2.0-870.
[ 14.172013] checking generic (fa000000 500000) vs hw (fa000000 1000000)
[ 14.172014] fb: switching to astdrmfb from EFI VGA
[ 14.172050] Console: switching to colour dummy device 80x25
[ 14.172494] [drm] Using P2A bridge for configuration
[ 14.172497] [drm] AST 2400 detected
[ 14.172507] [drm] Analog VGA only
[ 14.172521] [drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000
[ 14.173232] snd_hda_intel 0000:00:1b.0: enabling device (0140 -> 0142)
[ 14.173335] [TTM] Zone kernel: Available graphics memory: 16408614 kiB
[ 14.173336] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.173337] [TTM] Initializing pool allocator
[ 14.173339] [TTM] Initializing DMA pool allocator
[ 14.177685] fbcon: astdrmfb (fb0) is primary device
[ 14.198073] Console: switching to colour frame buffer device 128x48
[ 14.216339] ast 0000:0a:00.0: fb0: astdrmfb frame buffer device
[ 14.227981] iscsi: registered transport (iser)
[ 14.254552] [drm] Initialized ast 0.1.0 20120228 for 0000:0a:00.0 on minor 0
[ 14.254794] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 14.255267] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 14.255268] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.255269] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.255269] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.255270] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 14.255270] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.255271] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 14.255272] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 14.255273] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 14.266764] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.275334] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.275396] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.275468] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.275511] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.275578] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 14.275636] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 14.275688] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 14.288003] RPC: Registered named UNIX socket transport module.
[ 14.288004] RPC: Registered udp transport module.
[ 14.288004] RPC: Registered tcp transport module.
[ 14.288005] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.308698] RPC: Registered rdma transport module.
[ 14.308698] RPC: Registered rdma backchannel transport module.
[ 14.316218] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 14.316233] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 14.316249] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 14.316259] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 14.316263] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 14.316270] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 14.316274] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 14.316281] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 14.316285] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 14.316292] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 14.316296] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 14.316307] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 14.316311] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 14.316316] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 14.316325] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 14.316331] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 14.316335] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 14.316346] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 14.316354] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 14.316362] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 14.316374] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 14.316381] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 14.316389] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 14.316399] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 14.316401] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 14.316413] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 14.316416] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 14.316753] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
[ 14.316754] EDAC sbridge: Ver: 1.1.2
[ 14.332124] intel_rapl: Found RAPL domain package
[ 14.347083] Adding 33429500k swap on /dev/sdb3. Priority:-2 extents:1 across:33429500k SSFS
[ 14.395857] audit: type=1400 audit(1565897242.840:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=657 comm="apparmor_parser"
[ 14.395860] audit: type=1400 audit(1565897242.840:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=657 comm="apparmor_parser"
[ 14.397391] audit: type=1400 audit(1565897242.840:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=658 comm="apparmor_parser"
[ 14.397393] audit: type=1400 audit(1565897242.840:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=658 comm="apparmor_parser"
[ 14.397395] audit: type=1400 audit(1565897242.840:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=658 comm="apparmor_parser"
[ 14.467502] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 14.586580] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
[ 14.651529] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0857, dev_id: 0x20)
[ 14.654180] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 14.660015] IPMI SSIF Interface driver
[ 17.915163] igb 0000:06:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.915477] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 162.420365] VFIO - User Level meta-driver version: 0.3
[ 162.470470] vfio-pci: probe of 0000:02:00.0 failed with error -22
[ 290.173825] audit: type=1400 audit(1565897518.950:7): apparmor="DENIED" operation="capable" profile="/usr/bin/man" pid=1209 comm="man" capability=1 capname="dac_override"
[ 313.074169] audit: type=1400 audit(1565897541.855:8): apparmor="DENIED" operation="capable" profile="/usr/bin/man" pid=1488 comm="man" capability=1 capname="dac_override"
** Model information
sys_vendor: Supermicro
product_name: X10SRA-F
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 2.0a
board_vendor: Supermicro
board_name: X10SRA-F
board_version: 1.01
** Loaded modules:
vfio_pci
vfio_virqfd
vfio_iommu_type1
vfio
ipmi_ssif
nls_ascii
nls_cp437
vfat
fat
intel_rapl
sb_edac
x86_pkg_temp_thermal
intel_powerclamp
rpcrdma
sunrpc
coretemp
snd_hda_codec_realtek
kvm_intel
rdma_ucm
snd_hda_codec_generic
ib_iser
kvm
rdma_cm
irqbypass
iw_cm
crct10dif_pclmul
ib_umad
libiscsi
crc32_pclmul
snd_hda_intel
ib_ipoib
ast
scsi_transport_iscsi
ghash_clmulni_intel
snd_hda_codec
ttm
intel_cstate
efi_pstore
ib_cm
configfs
snd_hda_core
efivars
drm_kms_helper
intel_uncore
snd_hwdep
intel_rapl_perf
snd_pcm
drm
pcspkr
snd_timer
joydev
snd
soundcore
iTCO_wdt
sg
iTCO_vendor_support
evdev
wmi
ipmi_si
ipmi_devintf
ipmi_msghandler
pcc_cpufreq
button
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sr_mod
cdrom
sd_mod
hid_generic
usbhid
hid
mlx5_ib
ib_uverbs
ib_core
uas
usb_storage
crc32c_intel
ahci
libahci
mlx5_core
libata
aesni_intel
xhci_pci
xhci_hcd
lpc_ich
ehci_pci
scsi_mod
ehci_hcd
aes_x86_64
crypto_simd
cryptd
glue_helper
mlxfw
i2c_i801
bnxt_en
igb
usbcore
devlink
i2c_algo_bit
dca
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [8086:6f00] (rev 01)
Subsystem: Super Micro Computer Inc Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
NUMA node: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 [8086:6f02] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 [8086:6f04] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fb600000-fb6fffff
Prefetchable memory behind bridge: 0000383ffc900000-0000383ffecfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.2 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 [8086:6f06] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fb500000-fb5fffff
Prefetchable memory behind bridge: 0000383ffa000000-0000383ffc7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 [8086:6f08] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [8086:6f28] (rev 01)
Subsystem: Super Micro Computer Inc Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:05.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug [8086:6f29] (rev 01)
Subsystem: Super Micro Computer Inc Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors [8086:6f2a] (rev 01)
Subsystem: Super Micro Computer Inc Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:05.4 PIC [0800]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC [8086:6f2c] (rev 01) (prog-if 20 [IO(X)-APIC])
Subsystem: Super Micro Computer Inc Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Region 0: Memory at fb705000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:11.0 Unassigned class [ff00]: Intel Corporation C610/X99 series chipset SPSR [8086:8d7c] (rev 05)
Subsystem: Super Micro Computer Inc C610/X99 series chipset SPSR [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:11.4 SATA controller [0106]: Intel Corporation C610/X99 series chipset sSATA Controller [AHCI mode] [8086:8d62] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc C610/X99 series chipset sSATA Controller [AHCI mode] [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
NUMA node: 0
Region 0: I/O ports at f110 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f0f0 [size=8]
Region 3: I/O ports at f0e0 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at fb704000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB xHCI Host Controller [8086:8d31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc C610/X99 series chipset USB xHCI Host Controller [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 51
NUMA node: 0
Region 0: Memory at 383ffff00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 [8086:8d2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc C610/X99 series chipset USB Enhanced Host Controller [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fb702000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation C610/X99 series chipset HD Audio Controller [8086:8d20] (rev 05)
Subsystem: Super Micro Computer Inc C610/X99 series chipset HD Audio Controller [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 92
NUMA node: 0
Region 0: Memory at 383ffff10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #1 [8086:8d10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fb400000-fb4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #3 [8086:8d14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 32
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fb300000-fb3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #4 [8086:8d16] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 33
NUMA node: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb200000-fb2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #5 [8086:8d18] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
NUMA node: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: fb100000-fb1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #7 [8086:8d1c] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 35
NUMA node: 0
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fb0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #8 [8086:8d1e] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 36
NUMA node: 0
Bus: primary=00, secondary=0b, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 [8086:8d26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc C610/X99 series chipset USB Enhanced Host Controller [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fb701000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation C610/X99 series chipset LPC Controller [8086:8d44] (rev 05)
Subsystem: Super Micro Computer Inc C610/X99 series chipset LPC Controller [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] [8086:8d02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc C610/X99 series chipset 6-Port SATA Controller [AHCI mode] [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 62
NUMA node: 0
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f000 [size=32]
Region 5: Memory at fb700000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation C610/X99 series chipset SMBus Controller [8086:8d22] (rev 05)
Subsystem: Super Micro Computer Inc C610/X99 series chipset SMBus Controller [15d9:0857]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at 383ffff15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0580 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Signal processing controller [1180]: Intel Corporation C610/X99 series chipset Thermal Subsystem [8086:8d24] (rev 05)
Subsystem: Super Micro Computer Inc C610/X99 series chipset Thermal Subsystem [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
NUMA node: 0
Region 0: Memory at 383ffff14000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Broadcom Limited BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller [14e4:16d7] (rev 01)
Subsystem: Broadcom Limited BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller (BCM957414A4142CC 10Gb/25Gb Ethernet PCIe) [14e4:1402]
Physical Slot: 0
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Region 0: Memory at 383ffeb10000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at 383ffea00000 (64-bit, prefetchable) [size=1M]
Region 4: Memory at 383ffec22000 (64-bit, prefetchable) [size=8K]
Expansion ROM at fb680000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: bnxt_en
02:00.1 Ethernet controller [0200]: Broadcom Limited BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller [14e4:16d7] (rev 01)
Subsystem: Broadcom Limited BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller (BCM957414A4142CC 10Gb/25Gb Ethernet PCIe) [14e4:1402]
Physical Slot: 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 75
NUMA node: 0
Region 0: Memory at 383ffeb00000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at 383ffe900000 (64-bit, prefetchable) [size=1M]
Region 4: Memory at 383ffec20000 (64-bit, prefetchable) [size=8K]
Expansion ROM at fb600000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: bnxt_en
Kernel modules: bnxt_en
03:00.0 Ethernet controller [0200]: Mellanox Technologies MT27700 Family [ConnectX-4] [15b3:1013]
Subsystem: Mellanox Technologies MT27700 Family [ConnectX-4] (Mellanox Technologies ConnectX-4 Stand-up single-port 40GbE MCX413A-BCAT) [15b3:0003]
Physical Slot: 15
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 52
NUMA node: 0
Region 0: Memory at 383ffa000000 (64-bit, prefetchable) [size=32M]
Expansion ROM at fb500000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mlx5_core
Kernel modules: mlx5_core
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
06:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc I210 Gigabit Network Connection [15d9:1533]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fb300000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e000 [disabled] [size=32]
Region 3: Memory at fb380000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
07:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc I210 Gigabit Network Connection [15d9:1533]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: Memory at fb200000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at d000 [disabled] [size=32]
Region 3: Memory at fb280000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
08:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fb100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
09:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fb0fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0a:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc ASPEED Graphics Family [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: ast
Kernel modules: ast
0b:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
NUMA node: 0
Bus: primary=0b, secondary=0c, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0c:03.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
NUMA node: 0
Bus: primary=0c, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0c:07.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
NUMA node: 0
Bus: primary=0c, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
ff:0b.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f81] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f81]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0b.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f36] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f36]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: bdx_uncore
ff:0b.2 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f37] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f37]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: bdx_uncore
ff:0b.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug [8086:6f76] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe1] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe2] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe3] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe3]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff8] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff9] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ff9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffc] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffd] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6ffe] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent [8086:6fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f1d] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f1d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f34] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent [8086:6f34]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: bdx_uncore
ff:10.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1e] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.6 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f7d] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f7d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1f] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox [8086:6f1f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:12.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6fa0] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6fa0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:12.1 Performance counters [1101]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6f30] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 [8086:6f30]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: bdx_uncore
ff:13.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6fa8] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6fa8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6f71] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS [8086:6f71]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6faa] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6faa]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fab] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fab]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fac] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fad] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder [8086:6fad]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:13.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast [8086:6fae] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:13.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast [8086:6faf] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control [8086:6fb0] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control [8086:6fb0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: bdx_uncore
ff:14.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control [8086:6fb1] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control [8086:6fb1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: bdx_uncore
ff:14.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error [8086:6fb2] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error [8086:6fb2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:14.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error [8086:6fb3] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error [8086:6fb3]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:14.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbc] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbd] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbe] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface [8086:6fbf] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:15.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control [8086:6fb4] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control [8086:6fb4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: bdx_uncore
ff:15.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control [8086:6fb5] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control [8086:6fb5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: bdx_uncore
ff:15.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error [8086:6fb6] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error [8086:6fb6]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:15.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error [8086:6fb7] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error [8086:6fb7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:16.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Target Address/Thermal/RAS [8086:6f68] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
ff:16.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Broadcast [8086:6f6e] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:16.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast [8086:6f6f] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 1 - Channel 0 Thermal Control [8086:6fd0] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: bdx_uncore
ff:17.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fb8] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.5 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fb9] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.6 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fba] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.7 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface [8086:6fbb] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f98] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f98]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.1 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f99] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f99]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9a] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.3 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6fc0] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6fc0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at <ignored> [disabled]
Kernel driver in use: bdx_uncore
ff:1e.4 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9c] (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9c]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1f.0 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f88] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1f.2 System peripheral [0880]: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f8a] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
** USB devices:
Bus 004 Device 002: ID 8087:8002 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 007 Device 002: ID 04d9:2013 Holtek Semiconductor, Inc. Keyboard [Das Keyboard]
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:800a Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 0000:0000
Bus 002 Device 004: ID 0557:2419 ATEN International Co., Ltd
Bus 002 Device 003: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-amd64 is related to:
ii firmware-amd-graphics 20190114-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-1
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 5.2.9-1
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 934848@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 18 Aug 2019 22:54:21 +0100
Source: linux
Architecture: source
Version: 5.2.9-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Closes: 908712 925766 931707 933963 934091 934304 934309 934378 934824 934848
Changes:
linux (5.2.9-1) unstable; urgency=medium
.
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.2.8
- scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
- libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
- libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
- ALSA: usb-audio: Sanity checks for each pipe and EP types
- ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
- HID: wacom: fix bit shift for Cintiq Companion 2
- HID: Add quirk for HP X1200 PIXART OEM mouse
- atm: iphase: Fix Spectre v1 vulnerability (CVE-2017-5753)
- bnx2x: Disable multi-cos feature.
- drivers/net/ethernet/marvell/mvmdio.c: Fix non OF case (Closes: #908712)
- ife: error out when nla attributes are empty
- ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6
- ip6_tunnel: fix possible use-after-free on xmit
- ipip: validate header length in ipip_tunnel_xmit
- [armhf,arm64] mvpp2: fix panic on module removal
- [armhf,arm64] mvpp2: refactor MTU change code
- net: bridge: delete local fdb on device init failure
- net: bridge: mcast: don't delete permanent entries when fast leave is
enabled
- net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
- net: fix ifindex collision during namespace removal
- net/mlx5e: always initialize frag->last_in_page
- net/mlx5: Use reversed order when unregister devices
- net: phy: fixed_phy: print gpio error only if gpio node is present
- net: phy: mscc: initialize stats array
- net: sched: Fix a possible null-pointer dereference in dequeue_func()
- net sched: update vlan action for batched events operations
- net: sched: use temporary variable for actions indexes
- net/smc: do not schedule tx_work in SMC_CLOSED state
- [armhf,arm64] net: stmmac: Use netif_tx_napi_add() for TX polling
function
- tipc: compat: allow tipc commands without arguments
- tipc: fix unitilized skb list crash
- tun: mark small packets as owned by the tap sock
- net/mlx5: Fix modify_cq_in alignment
- net/mlx5e: Prevent encap flow counter update async to user query
- r8169: don't use MSI before RTL8168d
- net: fix bpf_xdp_adjust_head regression for generic-XDP
- [x86] hv_sock: Fix hang when a connection is closed
- net: phy: fix race in genphy_update_link
- net/smc: avoid fallback in case of non-blocking connect
- rocker: fix memory leaks of fib_work on two error return paths
- net/mlx5: Add missing RDMA_RX capabilities
- net/mlx5e: Fix matching of speed to PRM link modes
- compat_ioctl: pppoe: fix PPPOEIOCSFWD handling
- [x86] drm/i915/vbt: Fix VBT parsing for the PSR section
- Revert "mac80211: set NETIF_F_LLTX when using intermediate tx queues"
- [armhf,arm64] spi: bcm2835: Fix 3-wire mode if DMA is enabled
https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.2.9
- Revert "PCI: Add missing link delays required by the PCIe spec"
- [arm64] iio: cros_ec_accel_legacy: Fix incorrect channel setting
- [x86] iio: imu: mpu6050: add missing available scan masks
- [x86] crypto: ccp - Fix oops by properly managing allocated structures
- [x86] crypto: ccp - Add support for valid authsize values less than 16
- [x86] crypto: ccp - Ignore tag length when decrypting GCM ciphertext
- driver core: platform: return -ENXIO for missing GpioInt
- usb: usbfs: fix double-free of usb memory upon submiturb error
- Revert "USB: rio500: simplify locking"
- usb: iowarrior: fix deadlock on disconnect
- sound: fix a memory leak bug
- [arm64,mips/octeon] mmc: cavium: Set the correct dma max segment size for
mmc_host
- [arm64,mips/octeon] mmc: cavium: Add the missing dma unmap when the dma
has finished.
- loop: set PF_MEMALLOC_NOIO for the worker thread
- bdev: Fixup error handling in blkdev_get() (Closes: #934378)
- Input: usbtouchscreen - initialize PM mutex before using it
- Input: elantech - enable SMBus on new (2018+) systems
- [x86] Input: synaptics - enable RMI mode for HP Spectre X360
- [x86] mm: Check for pfn instead of page in vmalloc_sync_one()
- [x86] mm: Sync also unmappings in vmalloc_sync_all()
- mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
- [s390x] perf annotate: Fix s390 gap between kernel end and module start
- perf db-export: Fix thread__exec_comm()
- [s390x] perf record: Fix module size on s390
- [x86] purgatory: Do not use __builtin_memcpy and __builtin_memset
- [x86] purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
- genirq/affinity: Create affinity mask for single vector
- gfs2: gfs2_walk_metadata fix
- usb: yurex: Fix use-after-free in yurex_delete
- usb: typec: ucsi: ccg: Fix uninitilized symbol error
- usb: typec: tcpm: free log buf memory when remove debug file
- usb: typec: tcpm: remove tcpm dir if no children
- usb: typec: tcpm: Add NULL check before dereferencing config
- usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
- [armhf] can: flexcan: fix stop mode acknowledgment
- [armhf] can: flexcan: fix an use-after-free in flexcan_setup_stop_mode()
- can: peak_usb: fix potential double kfree_skb()
- [powerpc*] fix off by one in max_zone_pfn initialization for ZONE_DMA
- netfilter: nfnetlink: avoid deadlock due to synchronous request_module
- netfilter: Fix rpfilter dropping vrf packets by mistake
- netfilter: nf_tables: fix module autoload for redir
- netfilter: conntrack: always store window size un-scaled
- netfilter: nft_hash: fix symhash with modulus one
- rq-qos: don't reset has_sleepers on spurious wakeups
- rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
- rq-qos: use a mb for got_token
- netfilter: nf_tables: Support auto-loading for inet nat
- drm/amd/display: No audio endpoint for Dell MST display
- drm/amd/display: Clock does not lower in Updateplanes
- drm/amd/display: Wait for backlight programming completion in set
backlight level
- drm/amd/display: fix DMCU hang when going into Modern Standby
- drm/amd/display: use encoder's engine id to find matched free audio
device
- drm/amd/display: put back front end initialization sequence
- drm/amd/display: allocate 4 ddc engines for RV2
- drm/amd/display: Fix dc_create failure handling and 666 color depths
- drm/amd/display: Only enable audio if speaker allocation exists
- drm/amd/display: Increase size of audios array
- nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
- mac80211: fix possible memory leak in ieee80211_assign_beacon
- mac80211: don't warn about CW params when not using them
- allocate_flower_entry: should check for null deref
- hwmon: (nct6775) Fix register address and added missed tolerance for
nct6106
- [armhf] dts: imx6ul: fix clock frequency property name of I2C buses
- [powerpc*] papr_scm: Force a scm-unbind if initial scm-bind fails
- [arm64] Force SSBS on context switch
- [arm64] entry: SP Alignment Fault doesn't write to FAR_EL1
- [x86] iommu/vt-d: Check if domain->pgd was allocated
- [arm64] drm/msm/dpu: Correct dpu encoder spinlock initialization
- [ppc64] cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
- [s390x] qdio: add sanity checks to the fast-requeue path
- ALSA: compress: Fix regression on compressed capture streams
- ALSA: compress: Prevent bypasses of set_params
- ALSA: compress: Don't allow paritial drain operations on capture streams
- ALSA: compress: Be more restrictive about when a drain is allowed
- perf script: Fix off by one in brstackinsn IPC computation
- perf tools: Fix proper buffer size for feature processing
- perf stat: Fix segfault for event group in repeat mode
- perf session: Fix loading of compressed data split across adjacent
records
- perf probe: Avoid calling freeing routine multiple times for same pointer
- drbd: dynamically allocate shash descriptor
- ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
- nvme: ignore subnqn for ADATA SX6000LNP
- nvme: fix memory leak caused by incorrect subsystem free
- scsi: megaraid_sas: fix panic on loading firmware crashdump
- scsi: ibmvfc: fix WARN_ON during event pool release
- scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
- test_firmware: fix a memory leak bug
- tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
- [x86] perf/intel: Fix SLOTS PEBS event constraint
- [x86] perf/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x
register
- [x86] perf: Apply more accurate check on hypervisor platform
- perf/core: Fix creating kernel counters for PMUs that override event->cpu
- [s390x] dma: provide proper ARCH_ZONE_DMA_BITS value
- HID: sony: Fix race condition between rumble and device remove.
- ALSA: usb-audio: fix a memory leak bug
- [x86] KVM/nSVM: properly map nested VMCB
- can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices
- can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices
- hwmon: (nct7802) Fix wrong detection of in4 presence
- hwmon: (lm75) Fixup tmp75b clr_mask
- [x86] drm/i915: Fix wrong escape clock divisor init for GLK
- ALSA: firewire: fix a memory leak bug
- ALSA: hiface: fix multiple memory leak bugs
- ALSA: hda - Don't override global PCM hw info flag
- [x86] ALSA: hda - Workaround for crackled sound on AMD controller
(1022:1457)
- mac80211: don't WARN on short WMM parameters from AP
- dax: dax_layout_busy_page() should not unmap cow pages
- SMB3: Fix deadlock in validate negotiate hits reconnect
- smb3: send CAP_DFS capability during session setup
- NFSv4: Fix delegation state recovery
- NFSv4: Check the return value of update_open_stateid()
- NFSv4: Fix an Oops in nfs4_do_setattr
- [x86] KVM: Fix leak vCPU's VMCS value into other pCPU
- [armhf,arm64] KVM: Sync ICH_VMCR_EL2 back when about to block
- mwifiex: fix 802.11n/WPA detection
- iwlwifi: don't unmap as page memory that was mapped as single
- iwlwifi: mvm: fix an out-of-bound access
- iwlwifi: mvm: fix a use-after-free bug in iwl_mvm_tx_tso_segment
- iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41
- iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support
.
[ Salvatore Bonaccorso ]
* Enable Realtek 802.11ac wireless chips support (Closes: #933963)
.
[ Ben Hutchings ]
* [armel] fb-modules: Remove xgifb, which was removed upstream (fixes FTBFS)
* tracefs: Fix potential null dereference in default_file_open()
(Closes: #934304)
* [arm64] hwrandom: Re-enable HW_RANDOM_OMAP as module (Closes: #931707)
* ptp: Change CAVIUM_PTP from built-in to modular (Closes: #934848)
* bug script: Check whether /e/n/interfaces exists (Closes: #934824)
* bug script: Include network configuration from /e/n/interfaces.d
* bug script: Check for unreadable /e/n/interfaces files
* [x86] iommu: Enable INTEL_IOMMU_DEFAULT_ON (Closes: #934309)
* HID: Enable HID_BIGBEN_FF, HID_MACALLY, HID_GFRM, HID_GT683R,
HID_VIEWSONIC, HID_MALTRON, HID_U2FZERO as modules (Closes: #934091)
* usbip: network: Fix unaligned member access (Closes: #925766)
* libbpf: Fix cross-build
* [rt] Update to 5.2.9-rt3:
- i2c: exynos5: Remove IRQF_ONESHOT
- i2c: hix5hd2: Remove IRQF_ONESHOT
- sched/deadline: Ensure inactive_timer runs in hardirq context
- thermal/x86_pkg_temp: make pkg_temp_lock a raw spinlock
- dma-buf: Use seqlock_t instread disabling preemption
- KVM: arm/arm64: Let the timer expire in hardirq context on RT
- x86: preempt: Check preemption level before looking at lazy-preempt
- arm64: preempt: Fixup lazy preempt
- arm64: preempt: Check preemption level before looking at lazy-preempt
.
[ Alper Nebi Yasak ]
* [arm64] udeb: Add pl330 to kernel-image
Checksums-Sha1:
36cac9c12dc84a005208a4edef3b7898860d6f3f 186363 linux_5.2.9-1.dsc
cb8ce95c832c7a613fbe8841b01b3116d118a2cf 111104960 linux_5.2.9.orig.tar.xz
afc88dea262ad287baac78fd3341644b6c3c8f5a 3874532 linux_5.2.9-1.debian.tar.xz
273df4286c1f83e0b910cc50caedddf2402434a7 46203 linux_5.2.9-1_source.buildinfo
Checksums-Sha256:
00badbdf59b804b63fd374583777c178f9d89b46ab45dbe1161ce355f085dc34 186363 linux_5.2.9-1.dsc
82ce19693856e06671e52f259cb19956984ef7083248b7a4c97b8b0e386681e7 111104960 linux_5.2.9.orig.tar.xz
a2bbb88b9b329d226b8784080630ce7e0907b1c75de401f808d7c4f69e36d607 3874532 linux_5.2.9-1.debian.tar.xz
3c987d3d78e7e52038a75087e8092113a62e545783f73aeaa3366eb6c71b6eef 46203 linux_5.2.9-1_source.buildinfo
Files:
3c4df8f7c8978e93fa4b3f8a20cc38d7 186363 kernel optional linux_5.2.9-1.dsc
38840fd723b92176befa9d51c79053ad 111104960 kernel optional linux_5.2.9.orig.tar.xz
8abc209c5dc3a234092e728b09e5997d 3874532 kernel optional linux_5.2.9-1.debian.tar.xz
f50f6b585fb054e8e24280fd15fa14ad 46203 kernel optional linux_5.2.9-1_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=M4+F
-----END PGP SIGNATURE-----
--- End Message ---