Your message dated Wed, 9 Jan 2019 23:49:15 +0100 with message-id <23a4aeb2-1873-dbd6-9d66-a619a3d99728@mailbox.org> and subject line Re: linux-image-686-pae: Kernel panic after upgrading to 4.18 (Bug #911392) has caused the Debian Bug report #911392, regarding linux-image-686-pae: Kernel panic after upgrading to 4.18 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 911392: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911392 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-686-pae: Kernel panic after upgrading to 4.18
- From: Bernhard Übelacker <bernhardu@mailbox.org>
- Date: Fri, 19 Oct 2018 17:05:33 +0200
- Message-id: <efa6e9fe-96ee-2954-f1e3-a6354d506333@mailbox.org>
Package: src:linux Version: 4.18.10-2 Severity: normal Dear Maintainer, on this system starting with the 4.18 686-pae kernels the system does not boot up anymore, instead it shows a kernel oops. This issue was probably already reported in following bugs: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908382 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908924 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=909805 This upstream bug might be related: https://bugzilla.kernel.org/show_bug.cgi?id=200709#c5 But as there was no much information to compare I am opening a new one. Running with kernel parameter "mem=3G" makes the newer kernel boot as expected. Attached are logs of collected via serial line: - a failing boot of 4.18 - a failing boot of 4.19-rc7 - a successful boot of 4.17 - a successful boot of 4.18 with limited memory (kernel parameter "mem=3G") The information below is while running 4.17. Kind regards, Bernhard root@debian-athlonx2:~# free -h total used free shared buff/cache available Mem: 3,9Gi 62Mi 3,7Gi 5,0Mi 224Mi 3,5Gi Swap: 4,0Gi 0B 4,0Gi root@debian-athlonx2:~# lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: AuthenticAMD CPU family: 15 Model: 107 Model name: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ Stepping: 1 CPU MHz: 1000.000 CPU max MHz: 2600,0000 CPU min MHz: 1000,0000 BogoMIPS: 2009.23 Virtualization: AMD-V L1d cache: 64K L1i cache: 64K L2 cache: 512K Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good cpuid extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch vmmcall lbrv -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug enp1s0 iface enp1s0 inet dhcp ** PCI devices: 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0444] (rev a1) Subsystem: ASRock Incorporation MCP65 Memory Controller [1849:0444] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP65 LPC Bridge [10de:0441] (rev a2) Subsystem: ASRock Incorporation MCP65 LPC Bridge [1849:0441] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP65 SMBus [10de:0446] (rev a1) Subsystem: ASRock Incorporation MCP65 SMBus [1849:0446] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at bc00 [size=64] Region 4: I/O ports at 2d00 [size=64] Region 5: I/O ports at 2e00 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c_nforce2 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0445] (rev a1) Subsystem: ASRock Incorporation MCP65 Memory Controller [1849:0446] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP65 USB 1.1 OHCI Controller [10de:0454] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation MCP65 USB 1.1 OHCI Controller [1849:0454] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at fcdff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP65 USB 2.0 EHCI Controller [10de:0455] (rev a1) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation MCP65 USB 2.0 EHCI Controller [1849:0455] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fcdfec00 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:07.0 Audio device [0403]: NVIDIA Corporation MCP65 High Definition Audio [10de:044a] (rev a1) Subsystem: NVIDIA Corporation MCP65 High Definition Audio [10de:cb84] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at fcdf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fcf00000-fcffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: ASRock Incorporation MCP65 PCI bridge [1849:0449] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00:09.0 IDE interface [0101]: NVIDIA Corporation MCP65 IDE [10de:0448] (rev a1) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering]) Subsystem: ASRock Incorporation MCP65 IDE [1849:0448] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd Kernel modules: pata_amd, ata_generic 00:0a.0 SATA controller [0106]: NVIDIA Corporation MCP65 AHCI Controller [10de:044d] (rev a1) (prog-if 01 [AHCI 1.0]) Subsystem: ASRock Incorporation MCP65 AHCI Controller [1849:044d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 0e00 [size=8] Region 1: I/O ports at 0e20 [size=4] Region 2: I/O ports at 0e40 [size=8] Region 3: I/O ports at 0e60 [size=4] Region 4: I/O ports at a800 [size=16] Region 5: Memory at fcdfc000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci Kernel modules: ahci 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045b] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fce00000-fcefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASRock Incorporation MCP65 PCI Express bridge [1849:045b] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee02004 Data: 4021 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045a] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 25 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASRock Incorporation MCP65 PCI Express bridge [1849:045a] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee01004 Data: 4022 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 26 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fd000000-febfffff Prefetchable memory behind bridge: 00000000f0000000-00000000fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASRock Incorporation MCP65 PCI Express bridge [1849:0458] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee02004 Data: 4022 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0459] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 27 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASRock Incorporation MCP65 PCI Express bridge [1849:0459] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee01004 Data: 4023 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 800MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01) Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at c800 [size=256] Region 2: Memory at fceff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fcec0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [48] Vital Product Data Not readable Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee02004 Data: 4025 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [12c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [148 v1] Device Serial Number 1a-00-00-00-10-ec-81-68 Capabilities: [154 v1] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 02:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [1849:8023] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fcff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire_ohci 02:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: Memory at fcfff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: 8139cp, 8139too 02:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01) Subsystem: Avermedia Technologies Inc AverMedia M156 / Medion 2819 [1461:a70b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min, 63750ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at fcfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=3 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 04:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 640 Rev. 2] [10de:1282] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ZOTAC International (MCO) Ltd. GK208 [GeForce GT 640 Rev. 2] [19da:1324] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at fa000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at ec00 [size=128] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee01004 Data: 402b Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau 04:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 16 Region 0: Memory at feb7c000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: buster/sid APT prefers testing-debug APT policy: (500, 'testing-debug'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.17.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.18.0-2-686-pae depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.18.0-2-686-pae recommends: ii apparmor 2.13-8 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.18.0-2-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02+dfsg1-6 pn linux-doc-4.18 <none> Versions of packages linux-image-4.18.0-2-686-pae is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf informationScript started on 2018-10-19 15:45:23+02:00 [!p[?3;4l[4l>[?1049h[22;0;0t[4l[?1h=[0m(B[1;61r[H[2J[H[2J[ 0.000000] Linux version 4.17.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-28)) #1 SMP Debian 4.17.17-1 (2018-08-18) [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] RAMDISK: [mem 0x35bdb000-0x36de4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB050 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000DFFB0000 000038 (v01 A M I OEMRSDT 02000706 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000DFFB0200 000084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000DFFB0440 004DB1 (v01 ASR19 ASR19101 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DFFC0000 000040 [ 0.000000] ACPI: APIC 0x00000000DFFB0390 000070 (v01 A M I OEMAPIC 02000706 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000DFFB0400 00003C (v01 A M I OEMMCFG 02000706 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000DFFC0040 000060 (v01 A M I AMI_OEM 02000706 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DFFB5200 00028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] 3726MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000371fdfff] [ 0.000000] HighMem [mem 0x00000000371fe000-0x000000011fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffaffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x455 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s89420 r0 d29364 u118784 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1046193 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-3-686-pae root=UUID=af4f23de-a41b-439a-b48c-aa13bc8d672d ro console=ttyS0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000371fe:00120000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 4117172K/4193592K available (6478K kernel code, 655K rwdata, 2004K rodata, 868K init, 428K bss, 76420K reserved, 0K cma-reserved, 3290824K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc68fe000 - 0xc69d7000 ( 868 kB) [ 0.000000] .data : 0xc6653820 - 0xc68eee40 (2669 kB) [ 0.000000] .text : 0xc6000000 - 0xc6653820 (6478 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 28781 entries in 57 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.008000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012000] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.012000] do_IRQ: 0.55 No irq handler for vector [ 0.036000] tsc: Fast TSC calibration using PIT [ 0.040000] tsc: Detected 2612.035 MHz processor [ 0.044000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.048002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.07 BogoMIPS (lpj=10448140) [ 0.052002] pid_max: default: 32768 minimum: 301 [ 0.056049] Security Framework initialized [ 0.060002] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.064022] AppArmor: AppArmor initialized [ 0.068023] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.072006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.076253] mce: CPU supports 5 MCE banks [ 0.080007] LVT offset 0 assigned for vector 0xf9 [ 0.084003] process: using AMD E400 aware idle routine [ 0.088003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.092001] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.096003] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.100001] Spectre V2 : Mitigation: Full generic retpoline [ 0.104001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.108099] Freeing SMP alternatives memory: 20K [ 0.120000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x1) [ 0.120128] Performance Events: AMD PMU driver. [ 0.124004] ... version: 0 [ 0.128001] ... bit width: 48 [ 0.132001] ... generic registers: 4 [ 0.136001] ... value mask: 0000ffffffffffff [ 0.140001] ... max period: 00007fffffffffff [ 0.144001] ... fixed-purpose events: 0 [ 0.148001] ... event mask: 000000000000000f [ 0.152064] Hierarchical SRCU implementation. [ 0.160018] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.164032] smp: Bringing up secondary CPUs ... [ 0.168173] x86: Booting SMP configuration: [ 0.172002] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.260086] smp: Brought up 1 node, 2 CPUs [ 0.264004] smpboot: Max logical packages: 1 [ 0.268002] smpboot: Total of 2 processors activated (10448.18 BogoMIPS) [ 0.272536] devtmpfs: initialized [ 0.276204] PM: Registering ACPI NVS region [mem 0xdffc0000-0xdffeffff] (196608 bytes) [ 0.280075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284008] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.288068] pinctrl core: initialized pinctrl subsystem [ 0.292201] NET: Registered protocol family 16 [ 0.296111] audit: initializing netlink subsys (disabled) [ 0.300019] audit: type=2000 audit(1539956752.300:1): state=initialized audit_enabled=0 res=1 [ 0.304009] cpuidle: using governor ladder [ 0.308014] cpuidle: using governor menu [ 0.312011] TOM: 00000000e0000000 aka 3584M [ 0.316009] TOM2: 0000000120000000 aka 4608M [ 0.320062] ACPI: bus type PCI registered [ 0.324003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.332065] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.340004] PCI: not using MMCONFIG [ 0.344002] PCI: Using configuration type 1 for base access [ 0.352096] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.356001] mtrr: probably your BIOS does not setup all CPUs. [ 0.364001] mtrr: corrected configuration. [ 0.368990] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.372098] ACPI: Added _OSI(Module Device) [ 0.376006] ACPI: Added _OSI(Processor Device) [ 0.380002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.384002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.388002] ACPI: Added _OSI(Linux-Dell-Video) [ 0.395605] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.400254] ACPI: Interpreter enabled [ 0.403937] ACPI: (supports S0 S1 S4 S5) [ 0.404002] ACPI: Using IOAPIC for interrupt routing [ 0.408036] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.413188] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.416002] PCI: Using MMCONFIG for extended config space [ 0.420005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.424376] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.440772] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.444007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.448314] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.452222] PCI host bridge to bus 0000:00 [ 0.456004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.460003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.464003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.468003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.472003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff window] [ 0.476003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.481100] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.484003] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.488002] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.492002] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.497332] pci 0000:00:08.0: PCI bridge to [bus 02] (subtractive decode) [ 0.500138] pci 0000:01:00.0: enabling Extended Tags [ 0.504137] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.508009] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.512037] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.528022] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.532044] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.537116] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.540107] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.544106] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.548105] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 0.552105] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.556104] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.560105] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.564104] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.568105] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.572105] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.576104] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.580105] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.584105] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.588105] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.592105] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.596105] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.600105] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.604119] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.608105] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.612106] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.616167] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 0.620000] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.620005] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.624002] vgaarb: loaded [ 0.626799] EDAC MC: Ver: 3.0.0 [ 0.628112] PCI: Using ACPI for IRQ routing [ 0.641569] clocksource: Switched to clocksource refined-jiffies [ 0.663456] VFS: Disk quotas dquot_6.6.0 [ 0.664029] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.672146] AppArmor: AppArmor Filesystem Enabled [ 0.676032] pnp: PnP ACPI init [ 0.681549] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.688007] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.692006] system 00:03: [io 0x2000-0x207f] has been reserved [ 0.700006] system 00:03: [io 0x2080-0x20ff] has been reserved [ 0.704007] system 00:03: [io 0x2400-0x247f] has been reserved [ 0.712007] system 00:03: [io 0x2480-0x24ff] has been reserved [ 0.716007] system 00:03: [io 0x2800-0x287f] has been reserved [ 0.724008] system 00:03: [io 0x2880-0x28ff] has been reserved [ 0.728008] system 00:03: [io 0x2c00-0x2c7f] has been reserved [ 0.736009] system 00:03: [io 0x2c80-0x2cff] has been reserved [ 0.740010] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.748009] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.756010] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved [ 0.764011] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.768140] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.776012] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.784530] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.788106] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.796220] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.804014] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.812013] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.816014] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.824014] system 00:09: [mem 0xff380000-0xffffffff] has been reserved [ 0.832410] pnp: PnP ACPI: found 10 devices [ 0.836015] PnPBIOS: Disabled [ 0.876824] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.884029] clocksource: Switched to clocksource acpi_pm [ 0.889383] pci 0000:00:08.0: PCI bridge to [bus 02] [ 0.894362] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] [ 0.900470] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.907262] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.912235] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] [ 0.918335] pci 0000:00:0b.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.925124] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.930100] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.935070] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff] [ 0.941163] pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff] [ 0.947950] pci 0000:00:0d.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.955697] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.960778] NET: Registered protocol family 2 [ 0.965323] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.972992] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.980066] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.986543] TCP: Hash tables configured (established 8192 bind 8192) [ 0.992951] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.998882] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.005286] NET: Registered protocol family 1 [ 1.009993] PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.096124] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x6e0 took 84380 usecs [ 1.103775] PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.109151] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.114690] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.120236] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.125776] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.131318] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.136860] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.142406] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.147931] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.156288] pci 0000:04:00.1: Linked as a consumer to 0000:04:00.0 [ 1.162572] Unpacking initramfs... [ 1.577169] Freeing initrd memory: 18472K [ 1.581908] Initialise system trusted keyrings [ 1.586543] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.594740] zbud: loaded [ 1.597406] pstore: using deflate compression [ 3.079090] Key type asymmetric registered [ 3.083215] Asymmetric key parser 'x509' registered [ 3.088113] bounce: pool size: 64 pages [ 3.091971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.099421] io scheduler noop registered [ 3.103351] io scheduler deadline registered [ 3.107702] io scheduler cfq registered (default) [ 3.112416] io scheduler mq-deadline registered [ 3.117356] pcieport 0000:00:0b.0: Signaling PME with IRQ 24 [ 3.123049] pcieport 0000:00:0c.0: Signaling PME with IRQ 25 [ 3.128752] pcieport 0000:00:0d.0: Signaling PME with IRQ 26 [ 3.134450] pcieport 0000:00:0e.0: Signaling PME with IRQ 27 [ 3.140355] isapnp: Scanning for PnP cards... [ 3.497405] isapnp: No Plug & Play device found [ 3.502058] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.528800] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.556659] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.564814] Linux agpgart interface v0.103 [ 3.569440] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.576230] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.587035] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.592138] mousedev: PS/2 mouse device common for all mice [ 3.597771] rtc_cmos 00:00: RTC can wake from S4 [ 3.602589] rtc_cmos 00:00: registered as rtc0 [ 3.607056] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 3.613741] ledtrig-cpu: registered to indicate activity on CPUs [ 3.620196] NET: Registered protocol family 10 [ 3.629954] Segment Routing with IPv6 [ 3.633664] mip6: Mobile IPv6 [ 3.636659] NET: Registered protocol family 17 [ 3.641110] mpls_gso: MPLS GSO support [ 3.645040] Using IPI No-Shortcut mode [ 3.648984] registered taskstats version 1 [ 3.653092] Loading compiled-in X.509 certificates [ 3.837567] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 3.847989] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 3.855508] zswap: loaded using pool lzo/zbud [ 3.859960] AppArmor: AppArmor sha1 policy hashing enabled [ 3.865734] rtc_cmos 00:00: setting system clock to 2018-10-19 13:45:57 UTC (1539956757) [ 3.873869] Unstable clock detected, switching default tracing clock to "global" [ 3.873869] If you want to keep using the local clock, then add: [ 3.873869] "trace_clock=local" [ 3.873869] on the kernel command line [ 3.896316] Freeing unused kernel memory: 868K [ 3.908072] Write protecting the kernel text: 6480k [ 3.913005] Write protecting the kernel read-only data: 2012k [ 3.918757] NX-protecting the kernel data: 3760k [ 3.923789] x86/mm: Checked W+X mappings: passed, no W+X pages found. Loading, please wait... starting version 239 [ 4.009909] ACPI: bus type USB registered [ 4.014135] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 4.019945] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.020499] usbcore: registered new interface driver usbfs [ 4.026858] 8139cp 0000:02:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.035012] i2c i2c-1: nForce2 SMBus adapter at 0x2e00 [ 4.047127] usbcore: registered new interface driver hub [ 4.052543] usbcore: registered new device driver usb [ 4.059096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.066370] ehci-pci: EHCI PCI platform driver [ 4.071052] ehci-pci 0000:00:02.1: EHCI Host Controller [ 4.071120] SCSI subsystem initialized [ 4.080153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.086354] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.093830] ehci-pci 0000:00:02.1: debug port 1 [ 4.098779] ehci-pci 0000:00:02.1: irq 22, io mem 0xfcdfec00 [ 4.105264] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 4.111148] PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 4.111184] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.121997] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.128381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 4.136653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.142033] PCI Interrupt Link [LNEB] enabled at IRQ 18 [ 4.143909] usb usb1: Product: EHCI Host Controller [ 4.154051] usb usb1: Manufacturer: Linux 4.17.0-3-686-pae ehci_hcd [ 4.160372] usb usb1: SerialNumber: 0000:00:02.1 [ 4.160790] r8169 0000:01:00.0 eth0: RTL8168b/8111b at 0x(ptrval), 00:19:66:13:f4:b1, XID 18000000 IRQ 28 [ 4.165693] 8139too 0000:02:08.0 eth1: RealTek RTL8139 at 0x(ptrval), 00:40:f4:8c:96:79, IRQ 19 [ 4.174580] r8169 0000:01:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 4.192781] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 4.198788] PCI Interrupt Link [LNKD] enabled at IRQ 17 [ 4.204923] hub 1-0:1.0: USB hub found [ 4.208836] hub 1-0:1.0: 10 ports detected [ 4.214817] ohci-pci: OHCI PCI platform driver [ 4.219378] scsi host0: pata_amd [ 4.222787] scsi host1: pata_amd [ 4.226087] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.229996] 8139too 0000:02:08.0 enp2s8: renamed from eth1 [ 4.233067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.245821] PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 4.264068] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 4.274982] ahci 0000:00:0a.0: controller can do NCQ, turning on CAP_NCQ [ 4.281698] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP [ 4.291049] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.299147] ahci 0000:00:0a.0: flags: 64bit ncq sntf led clo pio ccc [ 4.306670] scsi host2: ahci [ 4.309781] scsi host3: ahci [ 4.312861] scsi host4: ahci [ 4.315937] scsi host5: ahci [ 4.319056] ata3: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc100 irq 21 [ 4.326454] ata4: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc180 irq 21 [ 4.333852] ata5: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc200 irq 21 [ 4.341245] ata6: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc280 irq 21 [ 4.348905] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 4.354498] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.361943] ohci-pci 0000:00:02.0: irq 23, io mem 0xfcdff000 [ 4.394789] ata1.00: ATA-6: Maxtor 33073H3, YAH814Y0, max UDMA/100 [ 4.400979] ata1.00: 60032448 sectors, multi 16: LBA [ 4.410896] ata1.00: configured for UDMA/100 [ 4.415297] scsi 0:0:0:0: Direct-Access ATA Maxtor 33073H3 14Y0 PQ: 0 ANSI: 5 [ 4.426080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 4.434343] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.441569] usb usb2: Product: OHCI PCI host controller [ 4.446797] usb usb2: Manufacturer: Linux 4.17.0-3-686-pae ohci_hcd [ 4.453072] usb usb2: SerialNumber: 0000:00:02.0 [ 4.457857] hub 2-0:1.0: USB hub found [ 4.461631] hub 2-0:1.0: 10 ports detected [ 4.662563] ata6: SATA link down (SStatus 0 SControl 300) [ 4.667986] ata5: SATA link down (SStatus 0 SControl 300) [ 4.673405] ata4: SATA link down (SStatus 0 SControl 300) [ 4.678820] ata3: SATA link down (SStatus 0 SControl 300) [ 4.688574] sd 0:0:0:0: [sda] 60032448 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 4.696377] sd 0:0:0:0: [sda] Write Protect is off [ 4.701200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.759746] sda: sda1 sda2 < sda5 > [ 4.763743] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.800148] firewire_core 0000:02:07.0: created device fw0: GUID 008f1300eefa0100, S400 [ 4.864026] usb 2-4: new low-speed USB device number 2 using ohci-pci [ 5.102060] usb 2-4: New USB device found, idVendor=046a, idProduct=0011, bcdDevice= 1.00 [ 5.110265] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.120492] hidraw: raw HID events driver (C) Jiri Kosina [ 5.139448] usbcore: registered new interface driver usbhid [ 5.145036] usbhid: USB HID core driver [ 5.150545] input: HID 046a:0011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046A:0011.0001/input/input1 [ 5.220182] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:02.0-4/input0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 5.869438] cryptd: max_cpu_qlen set to 1000 Begin: Will now check root file system ... fsck from util-linux 2.32.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: clean, 40952/1613824 files, 522274/6455296 blocks done. [ 6.375213] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. [ 6.442635] random: fast init done Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 8.927871] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.949301] systemd[1]: Detected architecture x86. Welcome to [1mDebian GNU/Linux buster/sid[0m! [ 9.030244] systemd[1]: Set hostname to <debian-athlonx2>. [ 11.088330] random: systemd: uninitialized urandom read (16 bytes read) [ 11.095113] systemd[1]: Listening on udev Kernel Socket. [[32m OK [39m] Listening on udev Kernel Socket. [ 11.116080] random: systemd: uninitialized urandom read (16 bytes read) [ 11.147774] systemd[1]: Listening on Syslog Socket. [[32m OK [39m] Listening on Syslog Socket. [ 11.168070] random: systemd: uninitialized urandom read (16 bytes read) [ 11.174762] systemd[1]: Listening on initctl Compatibility Named Pipe. [[32m OK [39m] Listening on initctl Compatibility Named Pipe. [ 11.196155] systemd[1]: Listening on fsck to fsckd communication Socket. [[32m OK [39m] Listening on fsck to fsckd communication Socket. [ 11.221031] systemd[1]: Created slice system-serial\x2dgetty.slice. [[32m OK [39m] Created slice system-serial\x2dgetty.slice. [ 11.244152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[32m OK [39m] Started Dispatch Password Requests to Console Directory Watch. [ 11.268237] systemd[1]: Listening on Journal Audit Socket. [[32m OK [39m] Listening on Journal Audit Socket. [[32m OK [39m] Listening on Journal Socket (/dev/log). [[32m OK [39m] Listening on udev Control Socket. [[32m OK [39m] Created slice User and Session Slice. [[32m OK [39m] Reached target Slices. [[32m OK [39m] Created slice system-getty.slice. [[32m OK [39m] Reached target Remote File Systems. [[32m OK [39m] Started Forward Password Requests to Wall Directory Watch. [[32m OK [39m] Reached target Local Encrypted Volumes. [[32m OK [39m] Reached target Paths. [[32m OK [39m] Set up automount Arbitrary Executabâ?¦rmats File System Automount Point. [[32m OK [39m] Listening on Journal Socket. Starting Create list of required stâ?¦ce nodes for the current kernel... Starting Load Kernel Modules... Mounting Huge Pages File System... Starting Set the console keyboard layout... Mounting Kernel Debug File System... Mounting POSIX Message Queue File System... Starting Journal Service... Starting udev Coldplug all Devices... Starting Remount Root and Kernel File Systems... [[32m OK [39m] Started Create list of required staâ?¦vice nodes for the current kernel. [[32m OK [39m] Started Load Kernel Modules. Starting Apply Kernel Variables... [[32m OK [39m] Mounted Huge Pages File System. [[32m OK [39m] Mounted Kernel Debug File System. [[32m OK [39m] Mounted POSIX Message Queue File System. [ 12.480681] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [[32m OK [39m] Started Remount Root and Kernel File Systems. [[32m OK [39m] Started Journal Service. Starting Create System Users... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... [[32m OK [39m] Started Apply Kernel Variables. [[32m OK [39m] Started udev Coldplug all Devices. [ 12.823698] systemd-journald[221]: Received request to flush runtime journal from PID 1 [[32m OK [39m] Started Load/Save Random Seed. [[32m OK [39m] Started Flush Journal to Persistent Storage. [[32m OK [39m] Started Create System Users. [[32m OK [39m] Started Set the console keyboard layout. Starting Create Static Device Nodes in /dev... [[32m OK [39m] Started Create Static Device Nodes in /dev. [[32m OK [39m] Reached target Local File Systems (Pre). [[32m OK [39m] Reached target Local File Systems. Starting Set console font and keymap... Starting Create Volatile Files and Directories... Starting Load AppArmor profiles... Starting udev Kernel Device Manager... [[32m OK [39m] Started Set console font and keymap. [[32m OK [39m] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [[32m OK [39m] Started Update UTMP about System Boot/Shutdown. [[32m OK [39m] Started Network Time Synchronization. [[32m OK [39m] Reached target System Time Synchronized. [[32m OK [39m] Started udev Kernel Device Manager. [[32m OK [39m] Started Load AppArmor profiles. Starting Raise network interfaces... [ 16.806172] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 16.814579] ACPI: Power Button [PWRB] [ 16.818324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 16.825747] ACPI: Power Button [PWRF] [ 16.851301] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.858685] parport_pc 00:01: reported by Plug and Play ACPI [ 16.865417] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.327323] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.531891] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 17.540084] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [[32m OK [39m] Found device /dev/ttyS0. [ 17.942619] input: PC Speaker as /devices/platform/pcspkr/input/input4 [[32m OK [39m] Found device RTL8111/8168/8411 PCI â?¦oller (Motherboard (one of many)). [[32m OK [39m] Started ifup for enp1s0. [ 18.787040] ppdev: user-space parallel port driver [[32m OK [39m] Reached target Sound Card. [ 19.956208] PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 19.961466] snd_hda_intel 0000:00:07.0: Disabling MSI [ 19.966905] PCI Interrupt Link [LNEA] enabled at IRQ 16 [ 19.972174] snd_hda_intel 0000:04:00.1: Disabling MSI [ 19.977244] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 20.312049] media: Linux media interface: v0.10 [ 20.935257] Linux video capture interface: v2.00 [ 21.288933] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card2/input5 [ 21.299117] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card2/input6 [ 21.330799] kvm: Nested Virtualization enabled [ 21.817049] MCE: In-kernel MCE decoding enabled. [ 21.958530] EDAC amd64: Node 0: DRAM ECC disabled. [ 21.963336] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 21.963336] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 21.963336] (Note that use of the override may cause unknown side effects.) [[32m OK [39m] Started Raise network interfaces. [[32m OK [39m] Reached target Network. [ 22.012052] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x00000100 [[32m OK [39m] Reached target Network is Online. [ 22.143336] powernow_k8: fid 0x12 (2600 MHz), vid 0x8 [ 22.148412] powernow_k8: fid 0x10 (2400 MHz), vid 0xa [ 22.153468] powernow_k8: fid 0xe (2200 MHz), vid 0xc [ 22.158441] powernow_k8: fid 0xc (2000 MHz), vid 0xe [ 22.163415] powernow_k8: fid 0xa (1800 MHz), vid 0x10 [ 22.168467] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 22.173554] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00) [ 22.184696] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line [ 22.195376] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.203302] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 22.210879] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 22.217241] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 22.223427] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 22.228869] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 22.235143] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 22.241376] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 22.247153] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c [ 22.252741] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [[32m OK [39m] Found device Maxtor_33073H3 5. Activating swap /dev/disk/by-uuid/0â?¦423-2294-4a1b-9556-8d0d1433dcdc... [ 22.947520] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 22.954284] PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 22.960157] saa7134: saa7134[0]: found at 0000:02:09.0, rev: 1, irq: 19, latency: 32, mmio: 0xfcfff000 [ 22.969499] saa7134: saa7134[0]: subsystem: 1461:a70b, board: AverMedia M156 / Medion 2819 [card=22,autodetected] [ 22.979786] saa7134: saa7134[0]: board init: gpio is 0 [ 22.985994] PCI Interrupt Link [LNED] enabled at IRQ 18 [ 22.991395] nouveau 0000:04:00.0: NVIDIA GK208 (108020a1) [ 23.104806] nouveau 0000:04:00.0: bios: version 80.28.3d.00.03 [ 23.112443] nouveau 0000:04:00.0: fb: 2048 MiB GDDR5 [ 23.196040] Registered IR keymap rc-avermedia [ 23.201066] rc rc0: saa7134 IR (AverMedia M156 / Me as /devices/pci0000:00/0000:00:08.0/0000:02:09.0/rc/rc0 [ 23.212262] input: saa7134 IR (AverMedia M156 / Me as /devices/pci0000:00/0000:00:08.0/0000:02:09.0/rc/rc0/input7 [ 23.223692] rc rc0: lirc_dev: driver saa7134 registered at minor = 0 [ 23.392034] saa7134: i2c eeprom 00: 61 14 0b a7 ff ff ff ff ff ff ff ff ff ff ff ff [ 23.400326] saa7134: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.408602] saa7134: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416804] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.425089] saa7134: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.433330] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.441574] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.449805] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.458031] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.466315] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.474628] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.482879] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.491132] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.499418] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.507675] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.515914] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.560347] Adding 4192252k swap on /dev/sda5. Priority:-2 extents:1 across:4192252k FS [[32m OK [39m] Activated swap /dev/disk/by-uuid/0f21a423-2294-4a1b-9556-8d0d1433dcdc. [[32m OK [39m] Reached target Swap. [[32m OK [39m] Reached target System Initialization. [[32m OK [39m] Started Daily apt download activities. [[32m OK [39m] Started Daily Cleanup of Temporary Directories. [[32m OK [39m] Started Daily rotation of log files. [[32m OK [39m] Listening on D-Bus System Message Bus Socket. [[32m OK [39m] Reached target Sockets. [[32m OK [39m] Reached target Basic System. [[32m OK [39m] Started irqbalance daemon. Starting LSB: exim Mail Transport Agent... [ 23.998892] tda9887 14-0043: creating new instance [ 24.004087] tda9887 14-0043: tda988[5/6/7] found Starting Login Service... Startin[ 24.025803] tuner: 14-0043: Tuner 74 found with type(s) Radio TV. g Permit User Sessions... [ 24.048111] tuner: 14-0061: Tuner -1 found with type(s) Radio TV. Starting OpenBSD Secure Shell server... [ 24.429061] [TTM] Zone kernel: Available graphics memory: 422854 kiB [ 24.435569] [TTM] Zone highmem: Available graphics memory: 2068266 kiB [ 24.442107] [TTM] Initializing pool allocator [ 24.446541] [TTM] Initializing DMA pool allocator [ 24.451283] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB [ 24.456344] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB [ 24.461785] nouveau 0000:04:00.0: DRM: TMDS table version 2.0 [ 24.467591] nouveau 0000:04:00.0: DRM: DCB version 4.0 [ 24.472750] nouveau 0000:04:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 24.479200] nouveau 0000:04:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 24.485654] nouveau 0000:04:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 24.492117] nouveau 0000:04:00.0: DRM: DCB conn 00: 00001031 [ 24.497821] nouveau 0000:04:00.0: DRM: DCB conn 01: 00002161 [ 24.503491] nouveau 0000:04:00.0: DRM: DCB conn 02: 00000200 [ 24.516843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 24.523476] [drm] Driver supports precise vblank timestamp query. [ 24.530327] nouveau 0000:04:00.0: DRM: MM: using COPY for buffer copies [[32m OK [39m] Started Regular background program processing daemon. Starting System Logging Service... [[32m OK [39m] Started D-Bus System Message Bus. [[32m OK [39m] Started Daily apt upgrade and clean activities. [[32m OK [39m] Reached target Timers. [ 24.720243] nouveau 0000:04:00.0: DRM: allocated 1024x768 fb: 0x60000, bo (ptrval) [ 24.729331] fbcon: nouveaufb (fb0) is primary device [ 24.884297] Console: switching to colour frame buffer device 128x48 [ 24.912208] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device [[32m OK [39m] Started Self Monitoring and Reporting Technology (SMART) Daemon. [ 24.928063] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 0 [ 24.932747] r8169 0000:01:00.0 enp1s0: link down [ 24.932801] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 24.933188] r8169 0000:01:00.0 enp1s0: link down [[32m OK [39m] Started Permit User Sessions. [[32m OK [39m] Started Getty on tty1. [[32m OK [39m] Started Serial Getty on ttyS0. [[32m OK [39m] Reached target Login Prompts. [ 25.180046] tuner-simple 14-0061: creating new instance [ 25.185307] tuner-simple 14-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 25.312238] saa7134: saa7134[0]: registered device video0 [v4l2] [ 25.318362] saa7134: saa7134[0]: registered device vbi0 [ 25.324346] saa7134: saa7134[0]: registered device radio0 [ 25.481513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input8 [ 25.492979] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [ 25.507887] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [ 25.516843] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [ 25.525323] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12 [ 25.537028] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13 [ 25.547586] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input14 [ 25.556754] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input15 [ 25.565897] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input16 [ 25.722768] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 25.729623] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfcfff000 irq 19 registered as card -1 [ 26.567089] r8169 0000:01:00.0 enp1s0: link up [ 26.571578] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [[32m OK [39m] Started System Logging Service. [[32m OK [39m] Started Login Service. [[32m OK [39m] Started OpenBSD Secure Shell server. Debian GNU/Linux buster/sid debian-athlonx2 ttyS0 debian-athlonx2 login: [?1l>[61;1H [?1049l[23;0;0t[screen is terminating]Script started on 2018-10-19 15:51:28+02:00 [!p[?3;4l[4l>[?1049h[22;0;0t[4l[?1h=[0m(B[1;61r[H[2J[H[2J[ 0.000000] Linux version 4.18.0-2-686-pae (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07) [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] RAMDISK: [mem 0x35bb5000-0x36dd1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB050 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000DFFB0000 000038 (v01 A M I OEMRSDT 02000706 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000DFFB0200 000084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000DFFB0440 004DB1 (v01 ASR19 ASR19101 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DFFC0000 000040 [ 0.000000] ACPI: APIC 0x00000000DFFB0390 000070 (v01 A M I OEMAPIC 02000706 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000DFFB0400 00003C (v01 A M I OEMMCFG 02000706 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000DFFC0040 000060 (v01 A M I AMI_OEM 02000706 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DFFB5200 00028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] 3726MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000371fdfff] [ 0.000000] HighMem [mem 0x00000000371fe000-0x000000011fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffaffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] [mem 0xe0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x455 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s89676 r0 d29108 u118784 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1046193 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-686-pae root=UUID=af4f23de-a41b-439a-b48c-aa13bc8d672d ro console=ttyS0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000371fe:00120000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 4116608K/4193592K available (6583K kernel code, 652K rwdata, 2044K rodata, 864K init, 428K bss, 76984K reserved, 0K cma-reserved, 3290824K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xd1921000 - 0xd19f9000 ( 864 kB) [ 0.000000] .data : 0xd166dda0 - 0xd1912000 (2704 kB) [ 0.000000] .text : 0xd1000000 - 0xd166dda0 (6583 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 29143 entries in 57 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.008000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012000] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.012000] do_IRQ: 0.55 No irq handler for vector [ 0.036000] tsc: Fast TSC calibration using PIT [ 0.040000] tsc: Detected 2612.033 MHz processor [ 0.044000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.048002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.06 BogoMIPS (lpj=10448132) [ 0.052002] pid_max: default: 32768 minimum: 301 [ 0.056048] Security Framework initialized [ 0.060002] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.064028] AppArmor: AppArmor initialized [ 0.068024] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.072006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.076248] mce: CPU supports 5 MCE banks [ 0.080007] LVT offset 0 assigned for vector 0xf9 [ 0.084003] process: using AMD E400 aware idle routine [ 0.088004] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.092001] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.096003] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.100001] Spectre V2 : Mitigation: Full generic retpoline [ 0.104001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.108095] Freeing SMP alternatives memory: 20K [ 0.120000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x1) [ 0.120152] Performance Events: AMD PMU driver. [ 0.124003] ... version: 0 [ 0.128001] ... bit width: 48 [ 0.132001] ... generic registers: 4 [ 0.136001] ... value mask: 0000ffffffffffff [ 0.140001] ... max period: 00007fffffffffff [ 0.144001] ... fixed-purpose events: 0 [ 0.148001] ... event mask: 000000000000000f [ 0.152066] Hierarchical SRCU implementation. [ 0.160072] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.164018] smp: Bringing up secondary CPUs ... [ 0.168170] x86: Booting SMP configuration: [ 0.172002] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.260085] smp: Brought up 1 node, 2 CPUs [ 0.264004] smpboot: Max logical packages: 1 [ 0.268002] smpboot: Total of 2 processors activated (10448.19 BogoMIPS) [ 0.272544] devtmpfs: initialized [ 0.276202] PM: Registering ACPI NVS region [mem 0xdffc0000-0xdffeffff] (196608 bytes) [ 0.280075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284008] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.288069] pinctrl core: initialized pinctrl subsystem [ 0.292210] NET: Registered protocol family 16 [ 0.296108] audit: initializing netlink subsys (disabled) [ 0.300019] audit: type=2000 audit(1539957099.300:1): state=initialized audit_enabled=0 res=1 [ 0.304014] cpuidle: using governor ladder [ 0.308015] cpuidle: using governor menu [ 0.312011] TOM: 00000000e0000000 aka 3584M [ 0.316009] TOM2: 0000000120000000 aka 4608M [ 0.320061] ACPI: bus type PCI registered [ 0.324003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.332065] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.340004] PCI: not using MMCONFIG [ 0.344002] PCI: Using configuration type 1 for base access [ 0.352095] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.356001] mtrr: probably your BIOS does not setup all CPUs. [ 0.364001] mtrr: corrected configuration. [ 0.368983] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.372104] ACPI: Added _OSI(Module Device) [ 0.376006] ACPI: Added _OSI(Processor Device) [ 0.380002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.384002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.388002] ACPI: Added _OSI(Linux-Dell-Video) [ 0.395124] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.397821] ACPI: Interpreter enabled [ 0.400027] ACPI: (supports S0 S1 S4 S5) [ 0.404002] ACPI: Using IOAPIC for interrupt routing [ 0.408034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.413086] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.416002] PCI: Using MMCONFIG for extended config space [ 0.420005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.424350] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.439120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.440007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.444199] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.448181] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.452214] PCI host bridge to bus 0000:00 [ 0.456004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.460002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.464003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.468002] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.472002] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff window] [ 0.476003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.481079] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.484003] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.488002] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.492002] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.500134] pci_bus 0000:02: extended config space not accessible [ 0.504399] pci 0000:00:08.0: PCI bridge to [bus 02] (subtractive decode) [ 0.508134] pci 0000:01:00.0: enabling Extended Tags [ 0.512134] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.516008] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.520034] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.536022] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.540041] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.545075] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.548106] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.552106] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.556106] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 0.560106] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.564106] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.568106] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.572105] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.576107] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.580107] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.584105] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.588106] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.592106] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.596106] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.600106] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.604106] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.608106] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.612120] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.616105] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.620106] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.624162] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 0.628000] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.628004] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.632002] vgaarb: loaded [ 0.634786] EDAC MC: Ver: 3.0.0 [ 0.636109] PCI: Using ACPI for IRQ routing [ 0.649520] clocksource: Switched to clocksource refined-jiffies [ 0.670962] VFS: Disk quotas dquot_6.6.0 [ 0.672023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.680143] AppArmor: AppArmor Filesystem Enabled [ 0.684030] pnp: PnP ACPI init [ 0.689418] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.696007] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.700006] system 00:03: [io 0x2000-0x207f] has been reserved [ 0.708006] system 00:03: [io 0x2080-0x20ff] has been reserved [ 0.712006] system 00:03: [io 0x2400-0x247f] has been reserved [ 0.720007] system 00:03: [io 0x2480-0x24ff] has been reserved [ 0.724007] system 00:03: [io 0x2800-0x287f] has been reserved [ 0.732008] system 00:03: [io 0x2880-0x28ff] has been reserved [ 0.736008] system 00:03: [io 0x2c00-0x2c7f] has been reserved [ 0.744008] system 00:03: [io 0x2c80-0x2cff] has been reserved [ 0.748010] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.756009] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.764010] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved [ 0.772011] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.776140] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.784012] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.792491] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.796103] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.804207] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.812014] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.816013] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.824014] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.832014] system 00:09: [mem 0xff380000-0xffffffff] has been reserved [ 0.840367] pnp: PnP ACPI: found 10 devices [ 0.844015] PnPBIOS: Disabled [ 0.884039] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.892029] clocksource: Switched to clocksource acpi_pm [ 0.897380] pci 0000:00:08.0: PCI bridge to [bus 02] [ 0.902360] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] [ 0.908461] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.915252] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.920225] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] [ 0.926327] pci 0000:00:0b.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.933122] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.938099] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.943069] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff] [ 0.949164] pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff] [ 0.955956] pci 0000:00:0d.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.963697] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.968782] NET: Registered protocol family 2 [ 0.973328] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.981002] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.988070] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.994554] TCP: Hash tables configured (established 8192 bind 8192) [ 1.000958] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.006891] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.013297] NET: Registered protocol family 1 [ 1.018011] PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.104123] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x6e0 took 84361 usecs [ 1.111743] PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.117115] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.122655] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.128200] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.133740] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.139282] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.144824] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.150371] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.155898] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.164254] pci 0000:04:00.1: Linked as a consumer to 0000:04:00.0 [ 1.170544] Unpacking initramfs... [ 1.586028] Freeing initrd memory: 18548K [ 1.590775] Initialise system trusted keyrings [ 1.595405] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.603577] zbud: loaded [ 1.606245] pstore: using deflate compression [ 3.087432] Key type asymmetric registered [ 3.091551] Asymmetric key parser 'x509' registered [ 3.096453] bounce: pool size: 64 pages [ 3.100327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.107780] io scheduler noop registered [ 3.111715] io scheduler deadline registered [ 3.116066] io scheduler cfq registered (default) [ 3.120778] io scheduler mq-deadline registered [ 3.125711] pcieport 0000:00:0b.0: Signaling PME with IRQ 24 [ 3.131415] pcieport 0000:00:0c.0: Signaling PME with IRQ 25 [ 3.137097] pcieport 0000:00:0d.0: Signaling PME with IRQ 26 [ 3.142786] pcieport 0000:00:0e.0: Signaling PME with IRQ 27 [ 3.148486] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.155400] isapnp: Scanning for PnP cards... [ 3.512451] isapnp: No Plug & Play device found [ 3.517103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.543835] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.571686] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.579825] Linux agpgart interface v0.103 [ 3.584459] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.591255] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.602054] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.607140] mousedev: PS/2 mouse device common for all mice [ 3.612776] rtc_cmos 00:00: RTC can wake from S4 [ 3.617593] rtc_cmos 00:00: registered as rtc0 [ 3.622061] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 3.628740] ledtrig-cpu: registered to indicate activity on CPUs [ 3.635169] NET: Registered protocol family 10 [ 3.644903] Segment Routing with IPv6 [ 3.648614] mip6: Mobile IPv6 [ 3.651587] NET: Registered protocol family 17 [ 3.656047] mpls_gso: MPLS GSO support [ 3.659960] Using IPI No-Shortcut mode [ 3.663909] registered taskstats version 1 [ 3.668015] Loading compiled-in X.509 certificates [ 3.852093] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 3.861513] zswap: loaded using pool lzo/zbud [ 3.865968] AppArmor: AppArmor sha1 policy hashing enabled [ 3.871746] rtc_cmos 00:00: setting system clock to 2018-10-19 13:51:44 UTC (1539957104) [ 3.879885] Unstable clock detected, switching default tracing clock to "global" [ 3.879885] If you want to keep using the local clock, then add: [ 3.879885] "trace_clock=local" [ 3.879885] on the kernel command line [ 3.901997] Freeing unused kernel image memory: 864K [ 3.916070] Write protecting the kernel text: 6584k [ 3.921004] Write protecting the kernel read-only data: 2052k [ 3.926749] NX-protecting the kernel data: 3656k [ 3.931776] x86/mm: Checked W+X mappings: passed, no W+X pages found. Loading, please wait... starting version 239 [ 4.014334] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 4.028326] i2c i2c-1: nForce2 SMBus adapter at 0x2e00 [ 4.034030] ACPI: bus type USB registered [ 4.038104] usbcore: registered new interface driver usbfs [ 4.043658] usbcore: registered new interface driver hub [ 4.049179] usbcore: registered new device driver usb [ 4.055314] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.055656] PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 4.062218] 8139cp 0000:02:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.079130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.085834] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.091505] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 4.091704] PCI Interrupt Link [LNEB] enabled at IRQ 18 [ 4.097073] SCSI subsystem initialized [ 4.106154] ehci-pci: EHCI PCI platform driver [ 4.110833] ehci-pci 0000:00:02.1: EHCI Host Controller [ 4.116211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.116374] PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 4.128155] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 4.129059] 8139too 0000:02:08.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:40:f4:8c:96:79, IRQ 17 [ 4.148302] scsi host0: pata_amd [ 4.151718] scsi host1: pata_amd [ 4.155037] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.162039] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.169217] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.178139] PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 4.181388] 8139too 0000:02:08.0 enp2s8: renamed from eth0 [ 4.183424] ehci-pci 0000:00:02.1: debug port 1 [ 4.195577] ehci-pci 0000:00:02.1: irq 22, io mem 0xfcdfec00 [ 4.204824] r8169 0000:01:00.0 eth0: RTL8168b/8111b, 00:19:66:13:f4:b1, XID 38000000, IRQ 28 [ 4.213279] r8169 0000:01:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 4.214438] ahci 0000:00:0a.0: controller can do NCQ, turning on CAP_NCQ [ 4.229675] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP [ 4.236706] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.237616] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 4.242665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.250340] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.258255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.258258] usb usb1: Product: EHCI Host Controller [ 4.266350] ahci 0000:00:0a.0: flags: 64bit ncq sntf led clo pio ccc [ 4.268065] scsi host2: ahci [ 4.273584] usb usb1: Manufacturer: Linux 4.18.0-2-686-pae ehci_hcd [ 4.273585] usb usb1: SerialNumber: 0000:00:02.1 [ 4.273749] hub 1-0:1.0: USB hub found [ 4.279075] scsi host3: ahci [ 4.284970] hub 1-0:1.0: 10 ports detected [ 4.290055] scsi host4: ahci [ 4.312628] scsi host5: ahci [ 4.315661] ata3: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc100 irq 21 [ 4.315930] ohci-pci: OHCI PCI platform driver [ 4.323078] ata4: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc180 irq 21 [ 4.327707] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 4.334930] ata5: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc200 irq 21 [ 4.334932] ata6: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc280 irq 21 [ 4.340759] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.363038] ohci-pci 0000:00:02.0: irq 23, io mem 0xfcdff000 [ 4.368727] ata1.00: ATA-6: Maxtor 33073H3, YAH814Y0, max UDMA/100 [ 4.374922] ata1.00: 60032448 sectors, multi 16: LBA [ 4.384975] scsi 0:0:0:0: Direct-Access ATA Maxtor 33073H3 14Y0 PQ: 0 ANSI: 5 [ 4.430063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.438330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.445556] usb usb2: Product: OHCI PCI host controller [ 4.450781] usb usb2: Manufacturer: Linux 4.18.0-2-686-pae ohci_hcd [ 4.457048] usb usb2: SerialNumber: 0000:00:02.0 [ 4.461816] hub 2-0:1.0: USB hub found [ 4.465585] hub 2-0:1.0: 10 ports detected [ 4.662545] ata6: SATA link down (SStatus 0 SControl 300) [ 4.667967] ata4: SATA link down (SStatus 0 SControl 300) [ 4.673390] ata5: SATA link down (SStatus 0 SControl 300) [ 4.673480] firewire_core 0000:02:07.0: created device fw0: GUID 008f1300eefa0100, S400 [ 4.678830] ata3: SATA link down (SStatus 0 SControl 300) [ 4.696778] sd 0:0:0:0: [sda] 60032448 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 4.704381] sd 0:0:0:0: [sda] Write Protect is off [ 4.709202] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.781262] sda: sda1 sda2 < sda5 > [ 4.785280] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.868036] usb 2-4: new low-speed USB device number 2 using ohci-pci [ 5.107056] usb 2-4: New USB device found, idVendor=046a, idProduct=0011, bcdDevice= 1.00 [ 5.115279] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.125329] hidraw: raw HID events driver (C) Jiri Kosina [ 5.144470] usbcore: registered new interface driver usbhid [ 5.150064] usbhid: USB HID core driver [ 5.155562] input: HID 046a:0011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046A:0011.0001/input/input1 [ 5.224169] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:02.0-4/input0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 5.890902] cryptd: max_cpu_qlen set to 1000 Begin: Will now check root file system ... fsck from util-linux 2.32.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: clean, 40952/1613824 files, 522342/6455296 blocks done. [ 6.396741] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. [ 6.464148] random: fast init done Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 6.797247] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 6.832031] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.838482] ata1.00: failed command: READ DMA [ 6.842848] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 6.842848] res 50/00:00:8f:c2:30/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 6.858224] ata1.00: status: { DRDY } [ 6.869384] ata1.00: configured for UDMA/100 [ 6.873672] ata1: EH complete [ 6.876682] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 6.900024] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.906469] ata1.00: failed command: READ DMA [ 6.910838] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 6.910838] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.926210] ata1.00: status: { DRDY } [ 6.937370] ata1.00: configured for UDMA/100 [ 6.941653] ata1: EH complete [ 6.944677] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 6.972033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.978482] ata1.00: failed command: READ DMA [ 6.982850] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 6.982850] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.998220] ata1.00: status: { DRDY } [ 7.009308] ata1.00: configured for UDMA/100 [ 7.013591] ata1: EH complete [ 7.016590] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.040021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.046471] ata1.00: failed command: READ DMA [ 7.050839] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 7.050839] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.066210] ata1.00: status: { DRDY } [ 7.077331] ata1.00: configured for UDMA/100 [ 7.081617] ata1: EH complete [ 7.084626] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.108033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.114479] ata1.00: failed command: READ DMA [ 7.118845] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 7.118845] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.134219] ata1.00: status: { DRDY } [ 7.145316] ata1.00: configured for UDMA/100 [ 7.149597] ata1: EH complete [ 7.152596] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.176022] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.182467] ata1.00: failed command: READ DMA [ 7.186836] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 7.186836] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.202209] ata1.00: status: { DRDY } [ 7.213334] ata1.00: configured for UDMA/100 [ 7.217620] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 7.225885] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 7.232758] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 7.239380] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 b8 00 00 88 00 [ 7.246694] print_req_error: I/O error, dev sda, sector 2090680 [ 7.252636] ata1: EH complete [ 7.273599] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.308028] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.314479] ata1.00: failed command: READ DMA [ 7.318848] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.318848] res 50/00:00:3f:e7:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 7.334220] ata1.00: status: { DRDY } [ 7.345310] ata1.00: configured for UDMA/100 [ 7.349589] ata1: EH complete [ 7.360901] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.384021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.390466] ata1.00: failed command: READ DMA [ 7.394838] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.394838] res 50/00:00:df:e6:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 7.410209] ata1.00: status: { DRDY } [ 7.421323] ata1.00: configured for UDMA/100 [ 7.425604] ata1: EH complete [ 7.440035] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.464033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.470481] ata1.00: failed command: READ DMA [ 7.474846] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.474846] res 50/00:00:37:e7:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 7.490219] ata1.00: status: { DRDY } [ 7.501337] ata1.00: configured for UDMA/100 [ 7.505624] ata1: EH complete [ 7.516572] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.540021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.546467] ata1.00: failed command: READ DMA [ 7.550837] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.550837] res 50/00:00:e7:e6:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 7.566208] ata1.00: status: { DRDY } [ 7.577321] ata1.00: configured for UDMA/100 [ 7.581605] ata1: EH complete [ 7.584615] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.608033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.614484] ata1.00: failed command: READ DMA [ 7.618852] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.618852] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.634224] ata1.00: status: { DRDY } [ 7.645337] ata1.00: configured for UDMA/100 [ 7.649621] ata1: EH complete [ 7.652627] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c876000+4096 of device mask ffffffff [ 7.676021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.682465] ata1.00: failed command: READ DMA [ 7.686833] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 7.686833] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.702205] ata1.00: status: { DRDY } [ 7.713328] ata1.00: configured for UDMA/100 [ 7.717612] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 7.725872] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 7.732746] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 7.739368] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 20 00 00 98 00 [ 7.746680] print_req_error: I/O error, dev sda, sector 2090528 [ 7.752612] ata1: EH complete [ 7.761829] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.796021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.802473] ata1.00: failed command: READ DMA [ 7.806840] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.806840] res 50/00:00:bf:e6:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 7.822125] ata1.00: status: { DRDY } [ 7.833216] ata1.00: configured for UDMA/100 [ 7.837496] ata1: EH complete [ 7.840497] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.868022] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.874474] ata1.00: failed command: READ DMA [ 7.878844] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.878844] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.894129] ata1.00: status: { DRDY } [ 7.905238] ata1.00: configured for UDMA/100 [ 7.909518] ata1: EH complete [ 7.912525] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 7.940034] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.946479] ata1.00: failed command: READ DMA [ 7.950847] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.950847] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.966131] ata1.00: status: { DRDY } [ 7.977241] ata1.00: configured for UDMA/100 [ 7.981527] ata1: EH complete [ 7.984527] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 8.008021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8.014467] ata1.00: failed command: READ DMA [ 8.018837] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 8.018837] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 8.034123] ata1.00: status: { DRDY } [ 8.045228] ata1.00: configured for UDMA/100 [ 8.049510] ata1: EH complete [ 8.052515] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 8.076033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8.082485] ata1.00: failed command: READ DMA [ 8.086852] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 8.086852] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 8.102138] ata1.00: status: { DRDY } [ 8.113249] ata1.00: configured for UDMA/100 [ 8.117533] ata1: EH complete [ 8.120534] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 8.144021] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8.150463] ata1.00: failed command: READ DMA [ 8.154834] ata1.00: cmd c8/00:08:f0:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 8.154834] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 8.170118] ata1.00: status: { DRDY } [ 8.181238] ata1.00: configured for UDMA/100 [ 8.185526] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8.193786] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 8.200660] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 8.207280] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 f0 00 00 08 00 [ 8.214585] print_req_error: I/O error, dev sda, sector 2090736 [ 8.220516] ata1: EH complete [ 8.223715] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 8.223715] [ 8.224513] CPU: 1 PID: 1 Comm: init Not tainted 4.18.0-2-686-pae #1 Debian 4.18.10-2 [ 8.224513] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 8.224513] Call Trace: [ 8.224513] dump_stack+0x58/0x76 [ 8.224513] panic+0x94/0x1e6 [ 8.224513] do_exit+0xa45/0xa50 [ 8.224513] do_group_exit+0x35/0x90 [ 8.224513] get_signal+0x24c/0x5b0 [ 8.224513] ? __do_page_fault+0x4c0/0x4c0 [ 8.224513] do_signal+0x29/0x560 [ 8.224513] ? __do_page_fault+0x4c0/0x4c0 [ 8.224513] exit_to_usermode_loop+0x62/0xc0 [ 8.224513] prepare_exit_to_usermode+0x35/0x50 [ 8.224513] resume_userspace+0xe/0x13 [ 8.224513] EIP: 0xb7f52aaf [ 8.224513] Code: Bad RIP value. [ 8.224513] EAX: b7f55199 EBX: 00000002 ECX: 00000000 EDX: 00000001 [ 8.224513] ESI: b7f5f000 EDI: bfdfc4ec EBP: 00468034 ESP: bfdfc46c [ 8.224513] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 007b EFLAGS: 00010202 [ 8.224513] Kernel Offset: 0x10000000 from 0xc1000000 (relocation range: 0xc0000000-0xf79fdfff) [ 8.224513] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 8.224513] ]--- [ 8.338225] ------------[ cut here ]------------ [ 8.342223] sched: Unexpected reschedule of offline CPU#0! [ 8.342223] WARNING: CPU: 1 PID: 1 at /build/linux-NQmn9R/linux-4.18.10/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x3b/0x50 [ 8.342223] Modules linked in: ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd aes_i586 hid_generic usbhid hid sd_mod ata_generic ohci_pci ahci libahci pata_amd libata ohci_hcd ehci_pci 8139too r8169 ehci_hcd scsi_mod 8139cp firewire_ohci mii firewire_core crc_itu_t usbcore usb_common i2c_nforce2 [ 8.342223] CPU: 1 PID: 1 Comm: init Not tainted 4.18.0-2-686-pae #1 Debian 4.18.10-2 [ 8.342223] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 8.342223] EIP: native_smp_send_reschedule+0x3b/0x50 [ 8.342223] Code: 8b 15 60 67 82 d1 8b 4a 18 ba fd 00 00 00 e8 2c 71 62 00 c9 c3 8d b4 26 00 00 00 00 8d 76 00 50 68 68 30 79 d1 e8 25 63 02 00 <0f> 0b 58 5a c9 c3 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 90 3e [ 8.342223] EAX: 0000002e EBX: 00000002 ECX: d1a14924 EDX: 00000000 [ 8.342223] ESI: 00000000 EDI: 00000002 EBP: f28f5cd4 ESP: f28f5ccc [ 8.342223] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010092 [ 8.342223] CR0: 80050033 CR2: b7f52a85 CR3: 11a01000 CR4: 000006f0 [ 8.342223] Call Trace: [ 8.342223] kick_ilb+0x63/0x90 [ 8.342223] trigger_load_balance+0x9e/0x190 [ 8.342223] ? dequeue_task_fair+0xab0/0xab0 [ 8.342223] scheduler_tick+0x9e/0xd0 [ 8.342223] update_process_times+0x3f/0x50 [ 8.342223] tick_sched_handle+0x27/0x70 [ 8.342223] tick_sched_timer+0x3c/0x90 [ 8.342223] __hrtimer_run_queues+0x104/0x290 [ 8.342223] ? tick_sched_do_timer+0x70/0x70 [ 8.342223] hrtimer_interrupt+0x100/0x280 [ 8.342223] smp_apic_timer_interrupt+0x62/0x120 [ 8.342223] apic_timer_interrupt+0x3c/0x44 [ 8.342223] EIP: panic+0x195/0x1e6 [ 8.342223] Code: 00 8b 55 f0 eb eb 83 c3 64 eb ad 83 3d 2c 15 a1 d1 00 74 05 e8 62 fb 01 00 68 60 15 a1 d1 68 e0 a3 79 d1 e8 e3 f4 05 00 fb 90 <8d> 74 26 00 58 5a 31 db e8 34 98 0b 00 39 fb 7c 18 83 f6 01 8b 15 [ 8.342223] EAX: 00000056 EBX: f6882900 ECX: d1a14924 EDX: 00000000 [ 8.342223] ESI: 00000000 EDI: 00000000 EBP: f28f5e40 ESP: f28f5e28 [ 8.342223] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00000246 [ 8.342223] do_exit+0xa45/0xa50 [ 8.342223] do_group_exit+0x35/0x90 [ 8.342223] get_signal+0x24c/0x5b0 [ 8.342223] ? __do_page_fault+0x4c0/0x4c0 [ 8.342223] do_signal+0x29/0x560 [ 8.342223] ? __do_page_fault+0x4c0/0x4c0 [ 8.342223] exit_to_usermode_loop+0x62/0xc0 [ 8.342223] prepare_exit_to_usermode+0x35/0x50 [ 8.342223] resume_userspace+0xe/0x13 [ 8.342223] EIP: 0xb7f52aaf [ 8.342223] Code: Bad RIP value. [ 8.342223] EAX: b7f55199 EBX: 00000002 ECX: 00000000 EDX: 00000001 [ 8.342223] ESI: b7f5f000 EDI: bfdfc4ec EBP: 00468034 ESP: bfdfc46c [ 8.342223] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 007b EFLAGS: 00010202 [ 8.342223] ---[ end trace e8c53796e96629c4 ]--- [ 8.612990] ------------[ cut here ]------------ [ 8.616980] sched: Unexpected reschedule of offline CPU#0! [ 8.616980] WARNING: CPU: 1 PID: 1 at /build/linux-NQmn9R/linux-4.18.10/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x3b/0x50 [ 8.616980] Modules linked in: ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd aes_i586 hid_generic usbhid hid sd_mod ata_generic ohci_pci ahci libahci pata_amd libata ohci_hcd ehci_pci 8139too r8169 ehci_hcd scsi_mod 8139cp firewire_ohci mii firewire_core crc_itu_t usbcore usb_common i2c_nforce2 [ 8.616980] CPU: 1 PID: 1 Comm: init Tainted: G W 4.18.0-2-686-pae #1 Debian 4.18.10-2 [ 8.616980] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 8.616980] EIP: native_smp_send_reschedule+0x3b/0x50 [ 8.616980] Code: 8b 15 60 67 82 d1 8b 4a 18 ba fd 00 00 00 e8 2c 71 62 00 c9 c3 8d b4 26 00 00 00 00 8d 76 00 50 68 68 30 79 d1 e8 25 63 02 00 <0f> 0b 58 5a c9 c3 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 90 3e [ 8.616980] EAX: 0000002e EBX: 00000000 ECX: d1a14924 EDX: 00000000 [ 8.616980] ESI: 80000008 EDI: d1677700 EBP: f2941edc ESP: f2941ed4 [ 8.616980] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086 [ 8.616980] CR0: 80050033 CR2: b7f52a85 CR3: 11a01000 CR4: 000006f0 [ 8.616980] Call Trace: [ 8.616980] <SOFTIRQ> [ 8.616980] resched_curr+0x56/0xc0 [ 8.616980] check_preempt_curr+0x75/0x80 [ 8.616980] ttwu_do_wakeup+0x17/0x190 [ 8.616980] ? activate_task+0x55/0xd0 [ 8.616980] ttwu_do_activate+0x62/0x70 [ 8.616980] try_to_wake_up+0x192/0x400 [ 8.616980] wake_up_process+0x14/0x20 [ 8.616980] swake_up_locked.part.0+0x14/0x40 [ 8.616980] swake_up+0x24/0x40 [ 8.616980] rcu_gp_kthread_wake+0x33/0x40 [ 8.616980] rcu_process_callbacks+0x31c/0x490 [ 8.616980] ? run_rebalance_domains+0x85/0xb0 [ 8.616980] __do_softirq+0xae/0x255 [ 8.616980] ? __softirqentry_text_start+0x8/0x8 [ 8.616980] call_on_stack+0x45/0x50 [ 8.616980] </SOFTIRQ> [ 8.616980] ? irq_exit+0xb5/0xc0 [ 8.616980] ? smp_apic_timer_interrupt+0x6c/0x120 [ 8.616980] ? apic_timer_interrupt+0x3c/0x44 [ 8.616980] ? panic+0x195/0x1e6 [ 8.616980] ? do_exit+0xa45/0xa50 [ 8.616980] ? do_group_exit+0x35/0x90 [ 8.616980] ? get_signal+0x24c/0x5b0 [ 8.616980] ? __do_page_fault+0x4c0/0x4c0 [ 8.616980] ? do_signal+0x29/0x560 [ 8.616980] ? __do_page_fault+0x4c0/0x4c0 [ 8.616980] ? exit_to_usermode_loop+0x62/0xc0 [ 8.616980] ? prepare_exit_to_usermode+0x35/0x50 [ 8.616980] ? resume_userspace+0xe/0x13 [ 8.616980] ---[ end trace e8c53796e96629c5 ]--- [?1l>[61;1H [?1049l[23;0;0t[screen is terminating] Script done on 2018-10-19 15:52:43+02:00Script started on 2018-10-19 16:15:14+02:00 [!p[?3;4l[4l>[?1049h[22;0;0t[4l[?1h=[0m(B[1;61r[H[2J[H[2J[ 0.000000] Linux version 4.19.0-rc7-686-pae (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-7)) #1 SMP Debian 4.19~rc7-1~exp1 (2018-10-07) [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2611.938 MHz processor [ 0.006363] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.006617] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.017989] RAMDISK: [mem 0x35b07000-0x36d7afff] [ 0.017996] ACPI: Early table checksum verification disabled [ 0.018322] ACPI: RSDP 0x00000000000FB050 000014 (v00 ACPIAM) [ 0.018327] ACPI: RSDT 0x00000000DFFB0000 000038 (v01 A M I OEMRSDT 02000706 MSFT 00000097) [ 0.018334] ACPI: FACP 0x00000000DFFB0200 000084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.018342] ACPI: DSDT 0x00000000DFFB0440 004DB1 (v01 ASR19 ASR19101 00000101 INTL 20051117) [ 0.018348] ACPI: FACS 0x00000000DFFC0000 000040 [ 0.018352] ACPI: APIC 0x00000000DFFB0390 000070 (v01 A M I OEMAPIC 02000706 MSFT 00000097) [ 0.018357] ACPI: MCFG 0x00000000DFFB0400 00003C (v01 A M I OEMMCFG 02000706 MSFT 00000097) [ 0.018362] ACPI: OEMB 0x00000000DFFC0040 000060 (v01 A M I AMI_OEM 02000706 MSFT 00000097) [ 0.018367] ACPI: SSDT 0x00000000DFFB5200 00028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.018386] 3728MB HIGHMEM available. [ 0.018388] 879MB LOWMEM available. [ 0.018390] mapped low ram: 0 - 36ffe000 [ 0.018391] low ram: 0 - 36ffe000 [ 0.018399] Zone ranges: [ 0.018401] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018403] Normal [mem 0x0000000001000000-0x0000000036ffdfff] [ 0.018405] HighMem [mem 0x0000000036ffe000-0x000000011fffffff] [ 0.018408] Movable zone start for each node [ 0.018409] Early memory node ranges [ 0.018411] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.018413] node 0: [mem 0x0000000000100000-0x00000000dffaffff] [ 0.018414] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.018417] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.069221] Using APIC driver default [ 0.069248] Nvidia board detected. Ignoring ACPI timer override. [ 0.069250] If you got timer trouble try acpi_use_timer_override [ 0.069397] Detected use of extended apic ids on hypertransport bus [ 0.069409] ACPI: PM-Timer IO Port: 0x2008 [ 0.069428] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.069431] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.069433] ACPI: BIOS IRQ0 override ignored. [ 0.069435] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.069438] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.069440] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.069446] Using ACPI (MADT) for SMP configuration information [ 0.069450] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.069469] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.069471] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.069473] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.069475] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.069478] [mem 0xe0000000-0xfebfffff] available for PCI devices [ 0.069480] Booting paravirtualized kernel on bare hardware [ 0.069484] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.069500] random: get_random_bytes called from start_kernel+0x81/0x45f with crng_init=0 [ 0.069508] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.069832] percpu: Embedded 29 pages/cpu @(ptrval) s89932 r0 d28852 u118784 [ 0.069861] Built 1 zonelists, mobility grouping on. Total pages: 1046198 [ 0.069864] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-rc7-686-pae root=UUID=af4f23de-a41b-439a-b48c-aa13bc8d672d ro console=ttyS0,115200n8 [ 0.070235] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.070405] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.070421] Initializing CPU#0 [ 0.070428] Initializing HighMem for node 0 (00036ffe:00120000) [ 0.236520] Initializing Movable for node 0 (00000000:00000000) [ 0.247649] Memory: 4115820K/4193592K available (6642K kernel code, 656K rwdata, 2060K rodata, 868K init, 452K bss, 77772K reserved, 0K cma-reserved, 3292872K highmem) [ 0.247656] virtual kernel memory layout: [ 0.247656] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.247656] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB) [ 0.247656] pkmap : 0xff000000 - 0xff200000 (2048 kB) [ 0.247656] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.247656] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.247656] .init : 0xdb936000 - 0xdba0f000 ( 868 kB) [ 0.247656] .data : 0xdb67ca8c - 0xdb926000 (2725 kB) [ 0.247656] .text : 0xdb000000 - 0xdb67ca8c (6642 kB) [ 0.247662] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.247835] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.247839] ftrace: allocating 29384 entries in 58 pages [ 0.260882] rcu: Hierarchical RCU implementation. [ 0.260886] rcu: [4CRCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.260889] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.264337] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.268868] Console: colour VGA+ 80x25 [ 0.861619] console [ttyS0] enabled [ 0.865106] ACPI: Core revision 20180810 [ 0.869154] APIC: Switch to symmetric I/O mode setup [ 0.874126] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.880155] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.886162] do_IRQ: 0.55 No irq handler for vector [ 0.909134] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.915147] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.87 BogoMIPS (lpj=10447752) [ 0.919139] pid_max: default: 32768 minimum: 301 [ 0.923184] Security Framework initialized [ 0.927139] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.931167] AppArmor: AppArmor initialized [ 0.935160] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.939143] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.943388] mce: CPU supports 5 MCE banks [ 0.947144] LVT offset 0 assigned for vector 0xf9 [ 0.951139] process: using AMD E400 aware idle routine [ 0.955140] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.959138] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.963139] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.967138] Spectre V2 : Mitigation: Full generic retpoline [ 0.971138] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.975258] Freeing SMP alternatives memory: 24K [ 0.987136] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x1) [ 0.987293] Performance Events: AMD PMU driver. [ 0.991140] ... version: 0 [ 0.995138] ... bit width: 48 [ 0.999138] ... generic registers: 4 [ 1.003138] ... value mask: 0000ffffffffffff [ 1.007138] ... max period: 00007fffffffffff [ 1.011138] ... fixed-purpose events: 0 [ 1.015138] ... event mask: 000000000000000f [ 1.019199] rcu: Hierarchical SRCU implementation. [ 1.023585] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.027200] smp: Bringing up secondary CPUs ... [ 1.035281] x86: Booting SMP configuration: [ 1.039139] .... node #0, CPUs: #1 [ 0.614472] Initializing CPU#1 [ 1.123213] smp: Brought up 1 node, 2 CPUs [ 1.127140] smpboot: Max logical packages: 1 [ 1.131139] smpboot: Total of 2 processors activated (10447.96 BogoMIPS) [ 1.135682] devtmpfs: initialized [ 1.139341] PM: Registering ACPI NVS region [mem 0xdffc0000-0xdffeffff] (196608 bytes) [ 1.143217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.147145] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.151207] pinctrl core: initialized pinctrl subsystem [ 1.155346] NET: Registered protocol family 16 [ 1.159256] audit: initializing netlink subsys (disabled) [ 1.163158] audit: type=2000 audit(1539958531.288:1): state=initialized audit_enabled=0 res=1 [ 1.167146] cpuidle: using governor ladder [ 1.171148] cpuidle: using governor menu [ 1.175145] TOM: 00000000e0000000 aka 3584M [ 1.179145] TOM2: 0000000120000000 aka 4608M [ 1.183179] ACPI: bus type PCI registered [ 1.187140] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.191208] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.195140] PCI: not using MMCONFIG [ 1.199142] PCI: Using configuration type 1 for base access [ 1.203230] mtrr: your CPUs had inconsistent variable MTRR settings [ 1.207138] mtrr: probably your BIOS does not setup all CPUs. [ 1.211138] mtrr: corrected configuration. [ 1.216177] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.219241] ACPI: Added _OSI(Module Device) [ 1.223141] ACPI: Added _OSI(Processor Device) [ 1.227138] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.231138] ACPI: Added _OSI(Processor Aggregator Device) [ 1.235139] ACPI: Added _OSI(Linux-Dell-Video) [ 1.239139] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.247886] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.256046] ACPI: Interpreter enabled [ 1.259164] ACPI: (supports S0 S1 S4 S5) [ 1.263139] ACPI: Using IOAPIC for interrupt routing [ 1.267177] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.272211] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.275139] PCI: Using MMCONFIG for extended config space [ 1.279142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.283481] ACPI: Enabled 10 GPEs in block 00 to 1F [ 1.295451] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.299144] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.303329] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR] [ 1.307313] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.311333] PCI host bridge to bus 0000:00 [ 1.315141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.319139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.323139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.327147] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 1.331139] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff window] [ 1.335150] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.340232] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.343140] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.347139] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.351139] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.356053] pci_bus 0000:02: extended config space not accessible [ 1.359537] pci 0000:00:08.0: PCI bridge to [bus 02] (subtractive decode) [ 1.363272] pci 0000:01:00.0: enabling Extended Tags [ 1.367236] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:0b.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 1.371188] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.375145] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 1.379173] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.383290] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:0d.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 1.399157] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 1.403181] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 1.408190] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 1.411243] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 1.415243] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 1.419241] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 1.423241] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 1.427241] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 1.431241] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 1.435241] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 1.439242] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 1.443241] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 1.447240] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 1.451241] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 1.455244] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 1.459241] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 1.463241] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 1.467241] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 1.471242] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 1.475257] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 1.479238] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 1.483236] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 1.487302] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 1.491136] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.491142] pci 0000:04:00.0: vgaarb: bridge control possible [ 1.495138] vgaarb: loaded [ 1.497931] EDAC MC: Ver: 3.0.0 [ 1.499254] PCI: Using ACPI for IRQ routing [ 1.512643] clocksource: Switched to clocksource refined-jiffies [ 1.535204] VFS: Disk quotas dquot_6.6.0 [ 1.539152] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.543286] AppArmor: AppArmor Filesystem Enabled [ 1.547166] pnp: PnP ACPI init [ 1.555421] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.559143] system 00:03: [io 0x0800-0x080f] has been reserved [ 1.567143] system 00:03: [io 0x2000-0x207f] has been reserved [ 1.571143] system 00:03: [io 0x2080-0x20ff] has been reserved [ 1.575143] system 00:03: [io 0x2400-0x247f] has been reserved [ 1.583144] system 00:03: [io 0x2480-0x24ff] has been reserved [ 1.587144] system 00:03: [io 0x2800-0x287f] has been reserved [ 1.595145] system 00:03: [io 0x2880-0x28ff] has been reserved [ 1.599145] system 00:03: [io 0x2c00-0x2c7f] has been reserved [ 1.607145] system 00:03: [io 0x2c80-0x2cff] has been reserved [ 1.611146] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved [ 1.619146] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved [ 1.627147] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved [ 1.635147] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved [ 1.639279] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.647149] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.655625] system 00:07: [io 0x0290-0x029f] has been reserved [ 1.659242] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.667337] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.675150] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 1.683150] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.687150] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.695151] system 00:09: [mem 0xff380000-0xffffffff] has been reserved [ 1.703502] pnp: PnP ACPI: found 10 devices [ 1.707152] PnPBIOS: Disabled [ 1.748410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.755166] clocksource: Switched to clocksource acpi_pm [ 1.760517] pci 0000:00:08.0: PCI bridge to [bus 02] [ 1.765497] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] [ 1.771599] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.778392] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 1.783363] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] [ 1.789463] pci 0000:00:0b.0: bridge window [mem 0xfce00000-0xfcefffff] [ 1.796251] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.801227] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 1.806198] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff] [ 1.812291] pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff] [ 1.819079] pci 0000:00:0d.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 1.826825] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 1.831906] NET: Registered protocol family 2 [ 1.836459] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.844129] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.851202] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.857681] TCP: Hash tables configured (established 8192 bind 8192) [ 1.864089] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.870019] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.876428] NET: Registered protocol family 1 [ 1.881142] PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.967257] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x6e7 took 84364 usecs [ 1.974877] PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.980239] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.985780] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.991322] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.996862] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.002406] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.007955] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.013503] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.019024] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.027391] pci 0000:04:00.1: Linked as a consumer to 0000:04:00.0 [ 2.033681] Unpacking initramfs... [ 2.459859] Freeing initrd memory: 18896K [ 2.464626] Initialise system trusted keyrings [ 2.469255] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 2.477492] zbud: loaded [ 2.480170] pstore: using deflate compression [ 2.659598] Key type asymmetric registered [ 2.663708] Asymmetric key parser 'x509' registered [ 2.668608] bounce: pool size: 64 pages [ 2.672468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.679922] io scheduler noop registered [ 2.683868] io scheduler deadline registered [ 2.688217] io scheduler cfq registered (default) [ 2.692928] io scheduler mq-deadline registered [ 2.697877] pcieport 0000:00:0b.0: Signaling PME with IRQ 24 [ 2.703568] pcieport 0000:00:0c.0: Signaling PME with IRQ 25 [ 2.709249] pcieport 0000:00:0d.0: Signaling PME with IRQ 26 [ 2.714946] pcieport 0000:00:0e.0: Signaling PME with IRQ 27 [ 2.720645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.727570] isapnp: Scanning for PnP cards... [ 3.084600] isapnp: No Plug & Play device found [ 3.089261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.115998] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.143855] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.152026] Linux agpgart interface v0.103 [ 3.156691] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.163489] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.174293] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.179408] mousedev: PS/2 mouse device common for all mice [ 3.185047] rtc_cmos 00:00: RTC can wake from S4 [ 3.189859] rtc_cmos 00:00: registered as rtc0 [ 3.194337] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 3.201010] ledtrig-cpu: registered to indicate activity on CPUs [ 3.207483] NET: Registered protocol family 10 [ 3.217460] Segment Routing with IPv6 [ 3.221173] mip6: Mobile IPv6 [ 3.224181] NET: Registered protocol family 17 [ 3.228635] mpls_gso: MPLS GSO support [ 3.232592] Using IPI No-Shortcut mode [ 3.236500] registered taskstats version 1 [ 3.240609] Loading compiled-in X.509 certificates [ 3.415003] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 3.424426] zswap: loaded using pool lzo/zbud [ 3.428886] AppArmor: AppArmor sha1 policy hashing enabled [ 3.434676] rtc_cmos 00:00: setting system clock to 2018-10-19 14:15:35 UTC (1539958535) [ 3.442817] Unstable clock detected, switching default tracing clock to "global" [ 3.442817] If you want to keep using the local clock, then add: [ 3.442817] "trace_clock=local" [ 3.442817] on the kernel command line [ 3.464719] Freeing unused kernel image memory: 868K [ 3.479208] Write protecting the kernel text: 6644k [ 3.484147] Write protecting the kernel read-only data: 2068k [ 3.489899] NX-protecting the kernel data: 5644k [ 3.495010] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.501456] Run /init as init process Loading, please wait... starting version 239 [ 3.588753] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 3.593933] i2c i2c-1: nForce2 SMBus adapter at 0x2e00 [ 3.615063] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.621978] 8139cp 0000:02:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.632898] ACPI: bus type USB registered [ 3.637531] usbcore: registered new interface driver usbfs [ 3.643048] usbcore: registered new interface driver hub [ 3.648456] usbcore: registered new device driver usb [ 3.659743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.666664] PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 3.676710] ehci-pci: EHCI PCI platform driver [ 3.681792] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 3.687489] PCI Interrupt Link [LNKD] enabled at IRQ 18 [ 3.693012] SCSI subsystem initialized [ 3.696438] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.697016] ehci-pci 0000:00:02.1: EHCI Host Controller [ 3.714874] PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 3.721219] 8139too 0000:02:08.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:40:f4:8c:96:79, IRQ 17 [ 3.729953] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.740286] ehci-pci 0000:00:02.1: debug port 1 [ 3.744945] libphy: r8169: probed [ 3.749036] r8169 0000:01:00.0 eth1: RTL8168b/8111b, 00:19:66:13:f4:b1, XID 38000000, IRQ 28 [ 3.757491] r8169 0000:01:00.0 eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 3.757769] PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 3.766062] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 3.781121] ehci-pci 0000:00:02.1: irq 22, io mem 0xfcdfec00 [ 3.781933] 8139too 0000:02:08.0 enp2s8: renamed from eth0 [ 3.797443] scsi host0: pata_amd [ 3.801257] scsi host1: pata_amd [ 3.804693] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.808310] ahci 0000:00:0a.0: controller can do NCQ, turning on CAP_NCQ [ 3.812767] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 3.819460] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP [ 3.829488] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 3.835592] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.835677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 3.843710] ahci 0000:00:0a.0: flags: 64bit ncq sntf led clo pio ccc [ 3.844399] r8169 0000:01:00.0 enp1s0: renamed from eth1 [ 3.849468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.849470] usb usb1: Product: EHCI Host Controller [ 3.849471] usb usb1: Manufacturer: Linux 4.19.0-rc7-686-pae ehci_hcd [ 3.849475] usb usb1: SerialNumber: 0000:00:02.1 [ 3.858664] scsi host2: ahci [ 3.865642] hub 1-0:1.0: USB hub found [ 3.899380] hub 1-0:1.0: 10 ports detected [ 3.903500] scsi host3: ahci [ 3.907845] ohci-pci: OHCI PCI platform driver [ 3.912469] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 3.915244] scsi host4: ahci [ 3.918058] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.921324] scsi host5: ahci [ 3.928384] ohci-pci 0000:00:02.0: irq 23, io mem 0xfcdff000 [ 3.931507] ata3: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc100 irq 21 [ 3.944316] ata4: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc180 irq 21 [ 3.951710] ata5: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc200 irq 21 [ 3.959102] ata6: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc280 irq 21 [ 3.997207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 4.005474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.012700] usb usb2: Product: OHCI PCI host controller [ 4.017932] usb usb2: Manufacturer: Linux 4.19.0-rc7-686-pae ohci_hcd [ 4.024385] usb usb2: SerialNumber: 0000:00:02.0 [ 4.029058] ata1.00: ATA-6: Maxtor 33073H3, YAH814Y0, max UDMA/100 [ 4.029496] hub 2-0:1.0: USB hub found [ 4.035242] ata1.00: 60032448 sectors, multi 16: LBA [ 4.039006] hub 2-0:1.0: 10 ports detected [ 4.049560] scsi 0:0:0:0: Direct-Access ATA Maxtor 33073H3 14Y0 PQ: 0 ANSI: 5 [ 4.281690] ata4: SATA link down (SStatus 0 SControl 300) [ 4.287108] ata6: SATA link down (SStatus 0 SControl 300) [ 4.292520] ata3: SATA link down (SStatus 0 SControl 300) [ 4.297932] ata5: SATA link down (SStatus 0 SControl 300) [ 4.303438] firewire_core 0000:02:07.0: created device fw0: GUID 008f1300eefa0100, S400 [ 4.318651] sd 0:0:0:0: [sda] 60032448 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 4.326253] sd 0:0:0:0: [sda] Write Protect is off [ 4.331070] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.401953] sda: sda1 sda2 < sda5 > [ 4.405986] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.443168] usb 2-4: new low-speed USB device number 2 using ohci-pci [ 4.681187] usb 2-4: New USB device found, idVendor=046a, idProduct=0011, bcdDevice= 1.00 [ 4.689369] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.701951] hidraw: raw HID events driver (C) Jiri Kosina [ 4.722602] usbcore: registered new interface driver usbhid [ 4.728194] usbhid: USB HID core driver [ 4.734746] input: HID 046a:0011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046A:0011.0001/input/input1 [ 4.803315] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:02.0-4/input0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 5.480448] cryptd: max_cpu_qlen set to 1000 Begin: Will now check root file system ... fsck from util-linux 2.32.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: clean, 47366/1613824 files, 583043/6455296 blocks done. [ 5.939751] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. [ 6.015811] random: fast init done Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 6.340170] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c921000+4096 of device mask ffffffff [ 6.375168] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.381626] ata1.00: failed command: READ DMA [ 6.386000] ata1.00: cmd c8/00:88:b8:e6:1f/00:00:00:00:00/e0 tag 0 dma 69632 in [ 6.386000] res 50/00:00:8f:c2:30/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 6.401370] ata1.00: status: { DRDY } [ 6.412504] ata1.00: configured for UDMA/100 [ 6.416792] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.425057] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 6.431939] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 6.438561] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 b8 00 00 88 00 [ 6.445874] print_req_error: I/O error, dev sda, sector 2090680 [ 6.451813] ata1: EH complete [ 6.472064] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.511172] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.517622] ata1.00: failed command: READ DMA [ 6.521990] ata1.00: cmd c8/00:98:20:e6:1f/00:00:00:00:00/e0 tag 0 dma 77824 in [ 6.521990] res 50/00:00:3f:e7:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 6.537359] ata1.00: status: { DRDY } [ 6.548475] ata1.00: configured for UDMA/100 [ 6.552764] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.561029] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 6.567910] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 6.574531] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 20 00 00 98 00 [ 6.581846] print_req_error: I/O error, dev sda, sector 2090528 [ 6.587788] ata1: EH complete [ 6.594258] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.631160] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.637611] ata1.00: failed command: READ DMA [ 6.641979] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.641979] res 50/00:00:e7:e6:1f/00:00:00:00:00/e0 Emask 0x40 (internal error) [ 6.657263] ata1.00: status: { DRDY } [ 6.668364] ata1.00: configured for UDMA/100 [ 6.672651] ata1: EH complete [ 6.675653] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.699159] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.705608] ata1.00: failed command: READ DMA [ 6.709977] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.709977] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.725262] ata1.00: status: { DRDY } [ 6.736383] ata1.00: configured for UDMA/100 [ 6.740669] ata1: EH complete [ 6.743678] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.771170] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.777622] ata1.00: failed command: READ DMA [ 6.781988] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.781988] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.797274] ata1.00: status: { DRDY } [ 6.808394] ata1.00: configured for UDMA/100 [ 6.812678] ata1: EH complete [ 6.815678] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.839158] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.845610] ata1.00: failed command: READ DMA [ 6.849979] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.849979] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.865264] ata1.00: status: { DRDY } [ 6.876384] ata1.00: configured for UDMA/100 [ 6.880669] ata1: EH complete [ 6.883676] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.907170] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.913618] ata1.00: failed command: READ DMA [ 6.917986] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.917986] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 6.933270] ata1.00: status: { DRDY } [ 6.944392] ata1.00: configured for UDMA/100 [ 6.948677] ata1: EH complete [ 6.951674] pata_amd 0000:00:09.0: dma_direct_map_sg: overflow 0x000000011c95b000+4096 of device mask ffffffff [ 6.975159] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.981607] ata1.00: failed command: READ DMA [ 6.985977] ata1.00: cmd c8/00:08:58:e6:1f/00:00:00:00:00/e0 tag 0 dma 4096 in [ 6.985977] res 50/00:00:bf:05:94/00:00:00:00:00/e3 Emask 0x40 (internal error) [ 7.001262] ata1.00: status: { DRDY } [ 7.012381] ata1.00: configured for UDMA/100 [ 7.016667] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 7.024930] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 7.031810] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 7.038431] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1f e6 58 00 00 08 00 [ 7.045736] print_req_error: I/O error, dev sda, sector 2090584 [ 7.051665] ata1: EH complete [ 7.054886] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 7.054886] [ 7.055662] CPU: 1 PID: 1 Comm: init Not tainted 4.19.0-rc7-686-pae #1 Debian 4.19~rc7-1~exp1 [ 7.055662] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 7.055662] Call Trace: [ 7.055662] dump_stack+0x58/0x7d [ 7.055662] panic+0x94/0x1dd [ 7.055662] do_exit.cold.22+0x1c/0xb6 [ 7.055662] do_group_exit+0x36/0x90 [ 7.055662] get_signal+0x253/0x520 [ 7.055662] ? __do_page_fault+0x4a0/0x4a0 [ 7.055662] do_signal+0x29/0x5d0 [ 7.055662] ? __do_page_fault+0x4a0/0x4a0 [ 7.055662] exit_to_usermode_loop+0x6a/0xd0 [ 7.055662] prepare_exit_to_usermode+0x3d/0x40 [ 7.055662] resume_userspace+0xe/0x13 [ 7.055662] EIP: 0xb7f8b4d0 [ 7.055662] Code: Bad RIP value. [ 7.055662] EAX: b7f99640 EBX: b7fa8000 ECX: b7f80a54 EDX: b7f821b0 [ 7.055662] ESI: b7fa8558 EDI: b7fa8024 EBP: bff5e5d8 ESP: bff5e57c [ 7.055662] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 007b EFLAGS: 00010202 [ 7.055662] Kernel Offset: 0x1a000000 from 0xc1000000 (relocation range: 0xc0000000-0xf77fdfff) [ 7.055662] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 7.055662] ]--- [ 7.170597] ------------[ cut here ]------------ [ 7.174595] sched: Unexpected reschedule of offline CPU#0! [ 7.174595] WARNING: CPU: 1 PID: 1 at arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x3b/0x50 [ 7.174595] Modules linked in: ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd aes_i586 hid_generic usbhid hid sd_mod ata_generic ohci_pci pata_amd ahci realtek libahci libata 8139too ohci_hcd ehci_pci firewire_ohci r8169 ehci_hcd libphy scsi_mod firewire_core 8139cp mii crc_itu_t usbcore usb_common i2c_nforce2 [ 7.174595] CPU: 1 PID: 1 Comm: init Not tainted 4.19.0-rc7-686-pae #1 Debian 4.19~rc7-1~exp1 [ 7.174595] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 7.174595] EIP: native_smp_send_reschedule+0x3b/0x50 [ 7.174595] Code: 8b 15 60 97 83 db 8b 4a 18 ba fd 00 00 00 e8 f8 57 63 00 c9 c3 8d b4 26 00 00 00 00 8d 76 00 50 68 80 bf 7a db e8 99 6f 02 00 <0f> 0b 58 5a c9 c3 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 90 66 [ 7.174595] EAX: 0000002e EBX: 00000000 ECX: dba31de4 EDX: 00000000 [ 7.174595] ESI: 00000002 EDI: 00000000 EBP: f2915cc8 ESP: f2915cc0 [ 7.174595] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010096 [ 7.174595] CR0: 80050033 CR2: b7f8b4a6 CR3: 1ba1a000 CR4: 000006f0 [ 7.174595] Call Trace: [ 7.174595] kick_ilb+0x73/0x90 [ 7.174595] trigger_load_balance+0x97/0x180 [ 7.174595] ? check_preempt_wakeup+0x250/0x250 [ 7.174595] scheduler_tick+0x9e/0xd0 [ 7.174595] update_process_times+0x52/0x60 [ 7.174595] tick_sched_handle+0x28/0x70 [ 7.174595] tick_sched_timer+0x3c/0x90 [ 7.174595] __hrtimer_run_queues+0x104/0x280 [ 7.174595] ? tick_sched_do_timer+0x70/0x70 [ 7.174595] hrtimer_interrupt+0x113/0x260 [ 7.174595] smp_apic_timer_interrupt+0x62/0x130 [ 7.174595] apic_timer_interrupt+0xd5/0xdc [ 7.174595] EIP: panic+0x197/0x1dd [ 7.174595] Code: 55 f0 eb eb 83 c3 64 eb ad 83 3d 0c ea a2 db 00 74 05 e8 15 f6 01 00 68 40 ea a2 db 68 8c 30 7b db e8 76 c8 05 00 fb 66 66 90 <66> 90 31 db 58 5a e8 f7 6e 0b 00 39 fb 7c 18 83 f6 01 8b 15 00 ea [ 7.174595] EAX: 00000056 EBX: f2925000 ECX: dba31de4 EDX: 00000000 [ 7.174595] ESI: 00000000 EDI: 00000000 EBP: f2915e34 ESP: f2915e1c [ 7.174595] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00000246 [ 7.174595] do_exit.cold.22+0x1c/0xb6 [ 7.174595] do_group_exit+0x36/0x90 [ 7.174595] get_signal+0x253/0x520 [ 7.174595] ? __do_page_fault+0x4a0/0x4a0 [ 7.174595] do_signal+0x29/0x5d0 [ 7.174595] ? __do_page_fault+0x4a0/0x4a0 [ 7.174595] exit_to_usermode_loop+0x6a/0xd0 [ 7.174595] prepare_exit_to_usermode+0x3d/0x40 [ 7.174595] resume_userspace+0xe/0x13 [ 7.174595] EIP: 0xb7f8b4d0 [ 7.174595] Code: Bad RIP value. [ 7.174595] EAX: b7f99640 EBX: b7fa8000 ECX: b7f80a54 EDX: b7f821b0 [ 7.174595] ESI: b7fa8558 EDI: b7fa8024 EBP: bff5e5d8 ESP: bff5e57c [ 7.174595] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 007b EFLAGS: 00010202 [ 7.174595] ---[ end trace 5f94b4ab56e463ed ]--- [ 7.444995] ------------[ cut here ]------------ [ 7.448983] sched: Unexpected reschedule of offline CPU#0! [ 7.448983] WARNING: CPU: 1 PID: 1 at arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x3b/0x50 [ 7.448983] Modules linked in: ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd aes_i586 hid_generic usbhid hid sd_mod ata_generic ohci_pci pata_amd ahci realtek libahci libata 8139too ohci_hcd ehci_pci firewire_ohci r8169 ehci_hcd libphy scsi_mod firewire_core 8139cp mii crc_itu_t usbcore usb_common i2c_nforce2 [ 7.448983] CPU: 1 PID: 1 Comm: init Tainted: G W 4.19.0-rc7-686-pae #1 Debian 4.19~rc7-1~exp1 [ 7.448983] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 7.448983] EIP: native_smp_send_reschedule+0x3b/0x50 [ 7.448983] Code: 8b 15 60 97 83 db 8b 4a 18 ba fd 00 00 00 e8 f8 57 63 00 c9 c3 8d b4 26 00 00 00 00 8d 76 00 50 68 80 bf 7a db e8 99 6f 02 00 <0f> 0b 58 5a c9 c3 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 90 66 [ 7.448983] EAX: 0000002e EBX: 00000000 ECX: dba31de4 EDX: 00000000 [ 7.448983] ESI: 80000008 EDI: db889380 EBP: f295fec8 ESP: f295fec0 [ 7.448983] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010096 [ 7.448983] CR0: 80050033 CR2: b7f8b4a6 CR3: 1ba1a000 CR4: 000006f0 [ 7.448983] Call Trace: [ 7.448983] <SOFTIRQ> [ 7.448983] resched_curr+0x56/0xc0 [ 7.448983] check_preempt_curr+0x87/0x90 [ 7.448983] ttwu_do_wakeup+0x17/0x190 [ 7.448983] ? activate_task+0x42/0xe0 [ 7.448983] ttwu_do_activate+0x55/0x70 [ 7.448983] try_to_wake_up+0x1a1/0x410 [ 7.448983] wake_up_process+0x14/0x20 [ 7.448983] swake_up_locked.part.2+0x14/0x40 [ 7.448983] swake_up_one+0x24/0x40 [ 7.448983] rcu_gp_kthread_wake+0x33/0x40 [ 7.448983] rcu_accelerate_cbs_unlocked+0x5f/0x80 [ 7.448983] rcu_process_callbacks+0x114/0x450 [ 7.448983] __do_softirq+0xb2/0x249 [ 7.448983] ? __softirqentry_text_start+0x8/0x8 [ 7.448983] call_on_stack+0x45/0x50 [ 7.448983] </SOFTIRQ> [ 7.448983] ? irq_exit+0xb5/0xc0 [ 7.448983] ? smp_apic_timer_interrupt+0x6c/0x130 [ 7.448983] ? apic_timer_interrupt+0xd5/0xdc [ 7.448983] ? panic+0x197/0x1dd [ 7.448983] ? do_exit.cold.22+0x1c/0xb6 [ 7.448983] ? do_group_exit+0x36/0x90 [ 7.448983] ? get_signal+0x253/0x520 [ 7.448983] ? __do_page_fault+0x4a0/0x4a0 [ 7.448983] ? do_signal+0x29/0x5d0 [ 7.448983] ? __do_page_fault+0x4a0/0x4a0 [ 7.448983] ? exit_to_usermode_loop+0x6a/0xd0 [ 7.448983] ? prepare_exit_to_usermode+0x3d/0x40 [ 7.448983] ? resume_userspace+0xe/0x13 [ 7.448983] ---[ end trace 5f94b4ab56e463ee ]--- [?1l>[61;1H [?1049l[23;0;0t[screen is terminating] Script done on 2018-10-19 16:16:33+02:00Script started on 2018-10-19 16:59:34+02:00 [!p[?3;4l[4l>[?1049h[22;0;0t[4l[?1h=[0m(B[1;61r[H[2J[H[2J[ 0.000000] Linux version 4.18.0-2-686-pae (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07) [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] user: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] user: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x00000000bfffffff] usable [ 0.000000] user: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data [ 0.000000] user: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS [ 0.000000] user: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved [ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] user: [mem 0x00000000ff380000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF5-eSATA2+, BIOS P1.10 02/06/2007 [ 0.000000] last_pfn = 0xc0000 max_arch_pfn = 0x1000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] RAMDISK: [mem 0x35bb5000-0x36dd1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB050 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000DFFB0000 000038 (v01 A M I OEMRSDT 02000706 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000DFFB0200 000084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000DFFB0440 004DB1 (v01 ASR19 ASR19101 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DFFC0000 000040 [ 0.000000] ACPI: APIC 0x00000000DFFB0390 000070 (v01 A M I OEMAPIC 02000706 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000DFFB0400 00003C (v01 A M I OEMMCFG 02000706 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000DFFC0040 000060 (v01 A M I AMI_OEM 02000706 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DFFB5200 00028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] 2190MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000371fdfff] [ 0.000000] HighMem [mem 0x00000000371fe000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bfffffff] [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] [mem 0xc0000000-0xdffaffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x455 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s89676 r0 d29108 u118784 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 784129 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-686-pae root=UUID=af4f23de-a41b-439a-b48c-aa13bc8d672d ro console=ttyS0,115200n8 mem=3G [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000371fe:000c0000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 3083968K/3145336K available (6583K kernel code, 652K rwdata, 2044K rodata, 864K init, 428K bss, 61368K reserved, 0K cma-reserved, 2242568K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc9921000 - 0xc99f9000 ( 864 kB) [ 0.000000] .data : 0xc966dda0 - 0xc9912000 (2704 kB) [ 0.000000] .text : 0xc9000000 - 0xc966dda0 (6583 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 29143 entries in 57 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.008000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012000] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.012000] do_IRQ: 0.55 No irq handler for vector [ 0.036000] tsc: Fast TSC calibration using PIT [ 0.040000] tsc: Detected 2611.751 MHz processor [ 0.044000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.048002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.50 BogoMIPS (lpj=10447004) [ 0.052002] pid_max: default: 32768 minimum: 301 [ 0.056048] Security Framework initialized [ 0.060002] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.064028] AppArmor: AppArmor initialized [ 0.068023] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.072006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.076248] mce: CPU supports 5 MCE banks [ 0.080007] LVT offset 0 assigned for vector 0xf9 [ 0.084003] process: using AMD E400 aware idle routine [ 0.088004] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.092001] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.096003] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.100001] Spectre V2 : Mitigation: Full generic retpoline [ 0.104001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.108094] Freeing SMP alternatives memory: 20K [ 0.120000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x1) [ 0.120152] Performance Events: AMD PMU driver. [ 0.124003] ... version: 0 [ 0.128001] ... bit width: 48 [ 0.132001] ... generic registers: 4 [ 0.136001] ... value mask: 0000ffffffffffff [ 0.140001] ... max period: 00007fffffffffff [ 0.144001] ... fixed-purpose events: 0 [ 0.148001] ... event mask: 000000000000000f [ 0.152066] Hierarchical SRCU implementation. [ 0.160063] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.164018] smp: Bringing up secondary CPUs ... [ 0.168171] x86: Booting SMP configuration: [ 0.172002] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.260085] smp: Brought up 1 node, 2 CPUs [ 0.264004] smpboot: Max logical packages: 1 [ 0.268002] smpboot: Total of 2 processors activated (10447.58 BogoMIPS) [ 0.272510] devtmpfs: initialized [ 0.276205] PM: Registering ACPI NVS region [mem 0xdffc0000-0xdffeffff] (196608 bytes) [ 0.280075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284008] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.288069] pinctrl core: initialized pinctrl subsystem [ 0.292212] NET: Registered protocol family 16 [ 0.296113] audit: initializing netlink subsys (disabled) [ 0.300019] audit: type=2000 audit(1539961181.300:1): state=initialized audit_enabled=0 res=1 [ 0.304014] cpuidle: using governor ladder [ 0.308015] cpuidle: using governor menu [ 0.312011] TOM: 00000000e0000000 aka 3584M [ 0.316009] TOM2: 0000000120000000 aka 4608M [ 0.320065] ACPI: bus type PCI registered [ 0.324003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.332065] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.340004] PCI: not using MMCONFIG [ 0.344002] PCI: Using configuration type 1 for base access [ 0.352100] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.356001] mtrr: probably your BIOS does not setup all CPUs. [ 0.364001] mtrr: corrected configuration. [ 0.368991] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.372103] ACPI: Added _OSI(Module Device) [ 0.376006] ACPI: Added _OSI(Processor Device) [ 0.380002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.384002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.388002] ACPI: Added _OSI(Linux-Dell-Video) [ 0.395125] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.397821] ACPI: Interpreter enabled [ 0.400027] ACPI: (supports S0 S1 S4 S5) [ 0.404002] ACPI: Using IOAPIC for interrupt routing [ 0.408034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.413103] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.416002] PCI: Using MMCONFIG for extended config space [ 0.420005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.424349] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.439159] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.440007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.444199] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.448181] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.452214] PCI host bridge to bus 0000:00 [ 0.456004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.460002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.464002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.468002] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.472002] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff window] [ 0.476003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.481078] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.484003] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.488002] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.492002] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.500204] pci_bus 0000:02: extended config space not accessible [ 0.504397] pci 0000:00:08.0: PCI bridge to [bus 02] (subtractive decode) [ 0.508135] pci 0000:01:00.0: enabling Extended Tags [ 0.512135] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.516008] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.520035] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.536023] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.540041] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.545080] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.548107] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.552107] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.556106] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 0.560106] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.564107] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.568106] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.572106] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.576106] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.580107] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.584106] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.588107] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.592106] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.596107] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.600106] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.604107] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.608106] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.612120] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.616105] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.620106] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.624162] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 0.628000] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.628004] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.632001] vgaarb: loaded [ 0.634797] EDAC MC: Ver: 3.0.0 [ 0.636109] PCI: Using ACPI for IRQ routing [ 0.649483] clocksource: Switched to clocksource refined-jiffies [ 0.670881] VFS: Disk quotas dquot_6.6.0 [ 0.672023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.680142] AppArmor: AppArmor Filesystem Enabled [ 0.684030] pnp: PnP ACPI init [ 0.689418] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.696007] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.700006] system 00:03: [io 0x2000-0x207f] has been reserved [ 0.708006] system 00:03: [io 0x2080-0x20ff] has been reserved [ 0.712006] system 00:03: [io 0x2400-0x247f] has been reserved [ 0.720007] system 00:03: [io 0x2480-0x24ff] has been reserved [ 0.724007] system 00:03: [io 0x2800-0x287f] has been reserved [ 0.732008] system 00:03: [io 0x2880-0x28ff] has been reserved [ 0.736008] system 00:03: [io 0x2c00-0x2c7f] has been reserved [ 0.744008] system 00:03: [io 0x2c80-0x2cff] has been reserved [ 0.748010] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.756009] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.764010] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved [ 0.768010] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.776142] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.784012] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.792493] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.796103] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.804207] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.812014] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.816013] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.824014] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.832014] system 00:09: [mem 0xff380000-0xffffffff] has been reserved [ 0.840369] pnp: PnP ACPI: found 10 devices [ 0.844015] PnPBIOS: Disabled [ 0.883997] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.892030] clocksource: Switched to clocksource acpi_pm [ 0.897382] pci 0000:00:08.0: PCI bridge to [bus 02] [ 0.902361] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] [ 0.908461] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.915254] pci 0000:00:0b.0: PCI bridge to [bus 01] [ 0.920226] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] [ 0.926319] pci 0000:00:0b.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.933116] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 0.938092] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 0.943062] pci 0000:00:0d.0: bridge window [io 0xe000-0xefff] [ 0.949155] pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff] [ 0.955942] pci 0000:00:0d.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.963681] pci 0000:00:0e.0: PCI bridge to [bus 05] [ 0.968777] NET: Registered protocol family 2 [ 0.973319] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.980992] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.988066] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.994546] TCP: Hash tables configured (established 8192 bind 8192) [ 1.000950] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.006884] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.013290] NET: Registered protocol family 1 [ 1.018005] PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.104122] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x6e0 took 84367 usecs [ 1.111749] PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.117116] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.122657] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.128203] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.133743] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.139284] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.144825] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.150374] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.155898] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.164255] pci 0000:04:00.1: Linked as a consumer to 0000:04:00.0 [ 1.170545] Unpacking initramfs... [ 1.585895] Freeing initrd memory: 18548K [ 1.590652] Initialise system trusted keyrings [ 1.595277] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.603442] zbud: loaded [ 1.606107] pstore: using deflate compression [ 3.088657] Key type asymmetric registered [ 3.092764] Asymmetric key parser 'x509' registered [ 3.097667] bounce: pool size: 64 pages [ 3.101542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.108994] io scheduler noop registered [ 3.112948] io scheduler deadline registered [ 3.117289] io scheduler cfq registered (default) [ 3.122001] io scheduler mq-deadline registered [ 3.126932] pcieport 0000:00:0b.0: Signaling PME with IRQ 24 [ 3.132618] pcieport 0000:00:0c.0: Signaling PME with IRQ 25 [ 3.138295] pcieport 0000:00:0d.0: Signaling PME with IRQ 26 [ 3.143984] pcieport 0000:00:0e.0: Signaling PME with IRQ 27 [ 3.149690] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.156605] isapnp: Scanning for PnP cards... [ 3.513677] isapnp: No Plug & Play device found [ 3.518339] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.545075] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.572927] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.581065] Linux agpgart interface v0.103 [ 3.585692] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.592480] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.603430] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.608520] mousedev: PS/2 mouse device common for all mice [ 3.614156] rtc_cmos 00:00: RTC can wake from S4 [ 3.618972] rtc_cmos 00:00: registered as rtc0 [ 3.623444] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 3.630127] ledtrig-cpu: registered to indicate activity on CPUs [ 3.636544] NET: Registered protocol family 10 [ 3.646299] Segment Routing with IPv6 [ 3.650015] mip6: Mobile IPv6 [ 3.653010] NET: Registered protocol family 17 [ 3.657466] mpls_gso: MPLS GSO support [ 3.661399] Using IPI No-Shortcut mode [ 3.665355] registered taskstats version 1 [ 3.669467] Loading compiled-in X.509 certificates [ 3.853974] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 3.863397] zswap: loaded using pool lzo/zbud [ 3.867851] AppArmor: AppArmor sha1 policy hashing enabled [ 3.873640] rtc_cmos 00:00: setting system clock to 2018-10-19 14:59:46 UTC (1539961186) [ 3.881776] Unstable clock detected, switching default tracing clock to "global" [ 3.881776] If you want to keep using the local clock, then add: [ 3.881776] "trace_clock=local" [ 3.881776] on the kernel command line [ 3.903888] Freeing unused kernel image memory: 864K [ 3.920071] Write protecting the kernel text: 6584k [ 3.925002] Write protecting the kernel read-only data: 2052k [ 3.930747] NX-protecting the kernel data: 3656k [ 3.935774] x86/mm: Checked W+X mappings: passed, no W+X pages found. Loading, please wait... starting version 239 [ 4.022306] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 4.029657] ACPI: bus type USB registered [ 4.031656] i2c i2c-1: nForce2 SMBus adapter at 0x2e00 [ 4.042419] usbcore: registered new interface driver usbfs [ 4.048380] usbcore: registered new interface driver hub [ 4.054000] usbcore: registered new device driver usb [ 4.059921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.067284] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.073143] PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 4.078706] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.085598] 8139cp 0000:02:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.095334] SCSI subsystem initialized [ 4.100427] ehci-pci: EHCI PCI platform driver [ 4.105423] ehci-pci 0000:00:02.1: EHCI Host Controller [ 4.110858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.118690] PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 4.121055] r8169 0000:01:00.0 eth0: RTL8168b/8111b, 00:19:66:13:f4:b1, XID 38000000, IRQ 28 [ 4.132368] r8169 0000:01:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 4.144514] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.153188] ahci 0000:00:0a.0: controller can do NCQ, turning on CAP_NCQ [ 4.159984] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP [ 4.162230] ehci-pci 0000:00:02.1: debug port 1 [ 4.171604] ehci-pci 0000:00:02.1: irq 22, io mem 0xfcdfec00 [ 4.177509] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 4.183182] PCI Interrupt Link [LNKD] enabled at IRQ 18 [ 4.183784] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 4.190810] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.196138] scsi host0: pata_amd [ 4.204055] ahci 0000:00:0a.0: flags: 64bit ncq sntf led clo pio ccc [ 4.208231] PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 4.215405] scsi host2: ahci [ 4.218988] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.219147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.222239] scsi host3: ahci [ 4.227645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.227647] usb usb1: Product: EHCI Host Controller [ 4.227648] usb usb1: Manufacturer: Linux 4.18.0-2-686-pae ehci_hcd [ 4.227650] usb usb1: SerialNumber: 0000:00:02.1 [ 4.227820] hub 1-0:1.0: USB hub found [ 4.236474] scsi host4: ahci [ 4.239110] scsi host1: pata_amd [ 4.247938] scsi host5: ahci [ 4.251576] 8139too 0000:02:08.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:40:f4:8c:96:79, IRQ 17 [ 4.257684] ata3: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc100 irq 21 [ 4.261951] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.265628] ata4: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc180 irq 21 [ 4.268509] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.268549] firewire_ohci 0000:02:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 4.271739] ata5: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc200 irq 21 [ 4.274656] hub 1-0:1.0: 10 ports detected [ 4.283339] ata6: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc280 irq 21 [ 4.341148] ohci-pci: OHCI PCI platform driver [ 4.342838] 8139too 0000:02:08.0 enp2s8: renamed from eth0 [ 4.346145] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 4.356734] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.364184] ohci-pci 0000:00:02.0: irq 23, io mem 0xfcdff000 [ 4.430072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.438340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.445566] usb usb2: Product: OHCI PCI host controller [ 4.450793] usb usb2: Manufacturer: Linux 4.18.0-2-686-pae ohci_hcd [ 4.457058] usb usb2: SerialNumber: 0000:00:02.0 [ 4.461835] hub 2-0:1.0: USB hub found [ 4.465613] hub 2-0:1.0: 10 ports detected [ 4.502783] ata1.00: ATA-6: Maxtor 33073H3, YAH814Y0, max UDMA/100 [ 4.508978] ata1.00: 60032448 sectors, multi 16: LBA [ 4.519024] scsi 0:0:0:0: Direct-Access ATA Maxtor 33073H3 14Y0 PQ: 0 ANSI: 5 [ 4.662546] ata5: SATA link down (SStatus 0 SControl 300) [ 4.667964] ata3: SATA link down (SStatus 0 SControl 300) [ 4.673381] ata4: SATA link down (SStatus 0 SControl 300) [ 4.678801] ata6: SATA link down (SStatus 0 SControl 300) [ 4.688756] sd 0:0:0:0: [sda] 60032448 512-byte logical blocks: (30.7 GB/28.6 GiB) [ 4.696678] sd 0:0:0:0: [sda] Write Protect is off [ 4.701502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764608] sda: sda1 sda2 < sda5 > [ 4.768606] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.864149] firewire_core 0000:02:07.0: created device fw0: GUID 008f1300eefa0100, S400 [ 4.872188] usb 2-4: new low-speed USB device number 2 using ohci-pci [ 5.110055] usb 2-4: New USB device found, idVendor=046a, idProduct=0011, bcdDevice= 1.00 [ 5.118252] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.128369] hidraw: raw HID events driver (C) Jiri Kosina [ 5.147457] usbcore: registered new interface driver usbhid [ 5.153049] usbhid: USB HID core driver [ 5.158549] input: HID 046a:0011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046A:0011.0001/input/input1 [ 5.228172] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:02.0-4/input0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 5.907394] cryptd: max_cpu_qlen set to 1000 Begin: Will now check root file system ... fsck from util-linux 2.32.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: clean, 49293/1613824 files, 590867/6455296 blocks done. [ 6.346703] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. [ 6.405829] random: fast init done Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 8.821517] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.842953] systemd[1]: Detected architecture x86. Welcome to [1mDebian GNU/Linux buster/sid[0m! [ 8.923973] systemd[1]: Set hostname to <debian-athlonx2>. [ 10.993161] random: systemd: uninitialized urandom read (16 bytes read) [ 10.999920] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[32m OK [39m] Started Forward Password Requests to Wall Directory Watch. [ 11.024103] random: systemd: uninitialized urandom read (16 bytes read) [ 11.030849] systemd[1]: Listening on udev Kernel Socket. [[32m OK [39m] Listening on udev Kernel Socket. [ 11.052053] random: systemd: uninitialized urandom read (16 bytes read) [ 11.059437] systemd[1]: Created slice User and Session Slice. [[32m OK [39m] Created slice User and Session Slice. [ 11.080157] systemd[1]: Listening on initctl Compatibility Named Pipe. [[32m OK [39m] Listening on initctl Compatibility Named Pipe. [ 11.104175] systemd[1]: Listening on fsck to fsckd communication Socket. [[32m OK [39m] Listening on fsck to fsckd communication Socket. [ 11.128073] systemd[1]: Reached target Slices. [[32m OK [39m] Reached target Slices. [ 11.144505] systemd[1]: Created slice system-serial\x2dgetty.slice. [[32m OK [39m] Created slice system-serial\x2dgetty.slice. [[32m OK [39m] Set up automount Arbitrary Executabâ?¦rmats File System Automount Point. [[32m OK [39m] Listening on Syslog Socket. [[32m OK [39m] Listening on Journal Audit Socket. [[32m OK [39m] Listening on Journal Socket (/dev/log). [[32m OK [39m] Listening on udev Control Socket. [[32m OK [39m] Reached target Remote File Systems. [[32m OK [39m] Listening on Journal Socket. Mounting POSIX Message Queue File System... Starting udev Coldplug all Devices... Starting Set the console keyboard layout... Starting Create list of required stâ?¦ce nodes for the current kernel... Mounting Huge Pages File System... Starting Load Kernel Modules... Starting Journal Service... Starting Remount Root and Kernel File Systems... Mounting Kernel Debug File System... [[32m OK [39m] Started Dispatch Password Requests to Console Directory Watch. [[32m OK [39m] Reached target Local Encrypted Volumes. [[32m OK [39m] Reached target Paths. [[32m OK [39m] Created slice system-getty.slice. [[32m OK [39m] Started Create list of required staâ?¦vice nodes for the current kernel. [[32m OK [39m] Started Load Kernel Modules. Starting Apply Kernel Variables... [[32m OK [39m] Mounted Huge Pages File System. [[32m OK [39m] Mounted Kernel Debug File System. [[32m OK [39m] Mounted POSIX Message Queue File System. [ 12.285518] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [[32m OK [39m] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [[32m OK [39m] Started Journal Service. [[32m OK [39m] Started Apply Kernel Variables. [[32m OK [39m] Started udev Coldplug all Devices. [[32m OK [39m] Started Load/Save Random Seed. Starting Flush Journal to Persistent Storage... [ 12.850837] systemd-journald[236]: Received request to flush runtime journal from PID 1 [[32m OK [39m] Started Flush Journal to Persistent Storage. [[32m OK [39m] Started Create System Users. [[32m OK [39m] Started Set the console keyboard layout. Starting Create Static Device Nodes in /dev... [[32m OK [39m] Started Create Static Device Nodes in /dev. [[32m OK [39m] Reached target Local File Systems (Pre). [[32m OK [39m] Reached target Local File Systems. Starting Set console font and keymap... Starting Load AppArmor profiles... Starting Create Volatile Files and Directories... Starting udev Kernel Device Manager... [[32m OK [39m] Started Set console font and keymap. [[32m OK [39m] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [[32m OK [39m] Started Update UTMP about System Boot/Shutdown. [[32m OK [39m] Started Network Time Synchronization. [[32m OK [39m] Reached target System Time Synchronized. [[32m OK [39m] Started udev Kernel Device Manager. [ 16.760202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 16.768624] ACPI: Power Button [PWRB] [ 16.772379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 16.779797] ACPI: Power Button [PWRF] [ 17.020896] parport_pc 00:01: reported by Plug and Play ACPI [ 17.026654] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.179718] sd 0:0:0:0: Attached scsi generic sg0 type 0 [[32m OK [39m] Started Load AppArmor profiles. Starting Raise network interfaces... [ 17.781767] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 17.789967] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [[32m OK [39m] Found device /dev/ttyS0. [ 18.205119] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 18.691740] media: Linux media interface: v0.10 [ 19.118726] videodev: Linux video capture interface: v2.00 [ 19.312167] kvm: Nested Virtualization enabled [ 19.510081] ppdev: user-space parallel port driver [[32m OK [39m] Found device RTL8111/8168/8411 PCI â?¦oller (Motherboard (one of many)). [ 19.851305] PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 19.856605] snd_hda_intel 0000:00:07.0: Disabling MSI [ 19.862030] PCI Interrupt Link [LNEA] enabled at IRQ 16 [ 19.867287] snd_hda_intel 0000:04:00.1: Disabling MSI [ 19.872366] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 20.106341] MCE: In-kernel MCE decoding enabled. [[32m OK [39m] Reached target Sound Card. [[32m OK [39m] Started ifup for enp1s0. [[32m OK [39m] Started Raise network interfaces. [ 20.747700] EDAC amd64: Node 0: DRAM ECC disabled. [ 20.752533] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 20.752533] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 20.752533] (Note that use of the override may cause unknown side effects.) [[32m OK [39m] Reached target Network. [[32m OK [39m] Reached target Network is Online. [ 20.965475] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 20.972203] PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 20.977456] saa7134: saa7134[0]: found at 0000:02:09.0, rev: 1, irq: 19, latency: 32, mmio: 0xfcfff000 [ 20.986764] saa7134: saa7134[0]: subsystem: 1461:a70b, board: AverMedia M156 / Medion 2819 [card=22,autodetected] [ 20.997126] saa7134: saa7134[0]: board init: gpio is 0 [ 21.002518] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card2/input5 [ 21.012692] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card2/input6 [ 21.024332] powernow_k8: fid 0x12 (2600 MHz), vid 0x8 [ 21.029401] powernow_k8: fid 0x10 (2400 MHz), vid 0xa [ 21.034475] powernow_k8: fid 0xe (2200 MHz), vid 0xc [ 21.039449] powernow_k8: fid 0xc (2000 MHz), vid 0xe [ 21.044422] powernow_k8: fid 0xa (1800 MHz), vid 0x10 [ 21.049483] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 21.054701] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00) [ 21.296050] Registered IR keymap rc-avermedia [ 21.300570] rc rc0: saa7134 IR (AverMedia M156 / Me as /devices/pci0000:00/0000:00:08.0/0000:02:09.0/rc/rc0 [ 21.310944] input: saa7134 IR (AverMedia M156 / Me as /devices/pci0000:00/0000:00:08.0/0000:02:09.0/rc/rc0/input7 [ 21.322450] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, scancode receiver, no transmitter [ 21.332297] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x00000100 [ 21.496042] saa7134: i2c eeprom 00: 61 14 0b a7 ff ff ff ff ff ff ff ff ff ff ff ff [ 21.503706] saa7134: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.511369] saa7134: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.511810] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line [ 21.519030] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519031] saa7134: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519032] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519033] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519034] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519035] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519036] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519037] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519038] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.519041] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.529650] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.529653] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 21.529655] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 21.537312] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.537313] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.537314] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.651121] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 21.657336] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 21.662765] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 21.670001] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 21.677018] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 21.682833] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c [ 21.688435] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [[32m OK [39m] Found device Maxtor_33073H3 5. Activating swap /dev/disk/by-uuid/0â?¦423-2294-4a1b-9556-8d0d1433dcdc... [ 22.569081] tda9887 2-0043: creating new instance [ 22.573820] tda9887 2-0043: tda988[5/6/7] found [ 22.588029] tuner: 2-0043: Tuner 74 found with type(s) Radio TV. [ 22.608090] tuner: 2-0061: Tuner -1 found with type(s) Radio TV. [ 22.615836] PCI Interrupt Link [LNED] enabled at IRQ 18 [ 22.621299] nouveau 0000:04:00.0: NVIDIA GK208 (108020a1) [ 22.734747] nouveau 0000:04:00.0: bios: version 80.28.3d.00.03 [ 22.742122] nouveau 0000:04:00.0: fb: 2048 MiB GDDR5 [ 22.798532] Adding 4192252k swap on /dev/sda5. Priority:-2 extents:1 across:4192252k FS [[32m OK [39m] Activated swap /dev/disk/by-uuid/0f21a423-2294-4a1b-9556-8d0d1433dcdc. [[32m OK [39m] Reached target Swap. [[32m OK [39m] Reached target System Initialization. [ 22.880029] tuner-simple 2-0061: creating new instance [ 22.885603] tuner-simple 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [[32m OK [39m] Started Daily rotation of log files. [[32m OK [39m] Listening on D-Bus System Message Bus Socket. [ 23.012192] saa7134: saa7134[0]: registered device video0 [v4l2] [[32m OK 23.019803] saa7134: saa7134[0]: registered device vbi0 [39m [32m0m] Reached target Sockets. [39m [32m[ OK [39m] Reached target Basic System. [ 23.034862] saa7134: saa7134[0]: registered device radio0 Starting Login Service... Starting System Logging Service... [ 23.126749] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 23.133962] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfcfff000 irq 19 registered as card -1 [[32m OK [39m] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting Permit User Sessions... Starting OpenBSD Secure Shell server... [[32m OK [39m] Started Regular background program processing daemon. [[32m OK [39m] Started irqbalance daemon. [[32m OK [39m] Started Daily apt download activities. [[32m OK [39m] Started Daily apt upgrade and clean activities. [[32m OK [39m] Started D-Bus System Message Bus. [[32m OK [39m] Started Daily Cleanup of Temporary Directories. [[32m OK [39m] Reached target Timers. Starting LSB: exim Mail Transport Agent... [[32m OK [39m] Started Permit User Sessions. [[32m OK [39m] Started Serial Getty on ttyS0. [[32m OK [39m] Started Getty on tty1. [ 24.057130] [TTM] Zone kernel: Available graphics memory: 430416 kiB [ 24.063586] [TTM] Zone highmem: Available graphics memory: 1551700 kiB [ 24.070186] [TTM] Initializing pool allocator [ 24.074638] [TTM] Initializing DMA pool allocator [ 24.079395] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB [ 24.079397] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB [ 24.079401] nouveau 0000:04:00.0: DRM: TMDS table version 2.0 [ 24.079403] nouveau 0000:04:00.0: DRM: DCB version 4.0 [[ 24.079405] nouveau 0000:04:00.0: DRM: DCB outp 00: 01000f02 00020030 [32m OK 24.079408] nouveau 0000:04:00.0: DRM: DCB outp 01: 02011f62 00020010 [39m [32mm] Reached targe[ 24.079410] nouveau 0000:04:00.0: DRM: DCB outp 02: 02022f10 00000000 [39m [32mt Login Prompts.[ 24.079412] nouveau 0000:04:00.0: DRM: DCB conn 00: 00001031 [39m [32m[ 24.079414] nouveau 0000:04:00.0: DRM: DCB conn 01: 00002161 [39m [32m[ 24.079415] nouveau 0000:04:00.0: DRM: DCB conn 02: 00000200 [39m [32m[ 24.084646] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [39m [32m[ 24.152411] [drm] Driver supports precise vblank timestamp query. [39m [32m[ 24.159566] nouveau 0000:04:00.0: DRM: MM: using COPY for buffer copies [39m [32m[ 24.348470] nouveau 0000:04:00.0: DRM: allocated 1024x768 fb: 0x80000, bo (ptrval) [39m [32m[ 24.356281] fbcon: nouveaufb (fb0) is primary device [39m [32m[ 24.470988] Console: switching to colour frame buffer device 128x48 [39m [32m[ 24.483225] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device [39m [32m[ 24.500123] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 0 [39m [32m[ 24.781875] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input8 [39m [32m[ 24.795538] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [39m [32m[ 24.820291] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [39m [32m[ 24.844569] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [39m [32m[ 24.855077] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12 [39m [32m[ 24.866466] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13 [39m [32m[ 24.876202] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input14 [39m [32m[ 24.885473] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input15 [39m [32m[ 24.894722] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input16 [39m [32m[ 25.400086] r8169 0000:01:00.0 enp1s0: link down [39m [32m[ 25.404768] r8169 0000:01:00.0 enp1s0: link down [39m [32m[ 25.410008] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [39m [32m[ 27.041135] r8169 0000:01:00.0 enp1s0: link up [39m [32m[ 27.045641] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [39m [32m[ OK [39m] Started Login Service. [[32m OK [39m] Started System Logging Service. [[32m OK [39m] Started OpenBSD Secure Shell server. Debian GNU/Linux buster/sid debian-athlonx2 ttyS0 debian-athlonx2 login: [?1l>[61;1H [?1049l[23;0;0t[screen is terminating] Script done on 2018-10-19 17:00:23+02:00
--- End Message ---
--- Begin Message ---
- To: 911392-done@bugs.debian.org
- Subject: Re: linux-image-686-pae: Kernel panic after upgrading to 4.18 (Bug #911392)
- From: Bernhard Übelacker <bernhardu@mailbox.org>
- Date: Wed, 9 Jan 2019 23:49:15 +0100
- Message-id: <23a4aeb2-1873-dbd6-9d66-a619a3d99728@mailbox.org>
- In-reply-to: <[🔎] 931c24be-a8fd-dc38-b456-31590d5a5873@mailbox.org>
- References: <efa6e9fe-96ee-2954-f1e3-a6354d506333@mailbox.org> <efa6e9fe-96ee-2954-f1e3-a6354d506333@mailbox.org> <17cb0d65-9fad-a42c-fdf1-fd569c89519f@mailbox.org> <17cb0d65-9fad-a42c-fdf1-fd569c89519f@mailbox.org> <[🔎] 931c24be-a8fd-dc38-b456-31590d5a5873@mailbox.org>
Sorry, forgot to close.Attachment: signature.asc
Description: OpenPGP digital signature
--- End Message ---