Bug#835160: (linux-image-4.6.0-1-amd64: touchpad support on Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0)
The touchpad used in the laptop Fujitsu LIFEBOOK E556 is not supported
by the linux kernel yet.
The driver input/mouse/elantech.c provides already support for some other
Fujitsu LIFEBOOK types. The same support is needed for "LIFEBOOK E556" too.
After adding a similar section related to "LIFEBOOK E556" the touchpad works
fine.
The values for the firmware version and Synaptics capabilities are taken
from the kernel boot messages:
elantech: assuming hardware version 4 (with firmware version 0x570f01)
elantech: Synaptics capabilities query result 0xc0, 0x14, 0x0c.
The touchpad has two hardware buttons.
Signed-off-by: Edgar Mueller
diff -uprN linux-source-4.7/drivers/input/mouse/elantech.c linux-source-4.7_modified/drivers/input/mouse/elantech.c
--- linux-source-4.7/drivers/input/mouse/elantech.c 2016-10-26 19:54:28.482642983 +0200
+++ linux-source-4.7_modified/drivers/input/mouse/elantech.c 2016-10-26 19:59:50.522789066 +0200
@@ -1123,6 +1123,7 @@ static int elantech_get_resolution_v4(st
* Avatar AVIU-145A2 0x361f00 ? clickpad
* Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
+ * Fujitsu LIFEBOOK E556 0x570f01 c0, 14, 0c 2 hw buttons
* Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
* Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
* Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
@@ -1514,6 +1515,13 @@ static const struct dmi_system_id elante
},
},
{
+ /* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
+ },
+ },
+ {
/* Fujitsu LIFEBOOK E544 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
Reply to: