Bug#787331: psmouse: Keyboard problem after resuming from suspend mode (misses keystrokes)
Package: src:linux
Version: 3.16.7-ckt9-3~deb8u1
Severity: normal
File: psmouse
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
After resuming from suspend mode, the keyboard seems to miss lots ofkeystrokes. You need to type very slowly.
This is quite predictable, it happens each time the computer resumes from suspend mode.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Unplugging the keyboard an plugging it back solves the problem.
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=6b17126f-f96e-4c3e-ae1d-12c4e1e73001 ro initrd=/install/gtk/initrd.gz quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[18746.887853] smpboot: Booting Node 0 Processor 3 APIC 0x13
[18746.898812] kvm: enabling virtualization on CPU3
[18746.901049] CPU3 is up
[18746.901995] ACPI: Waking up from system sleep state S3
[18746.902831] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[18746.902855] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[18746.902956] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[18746.917157] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[18746.917160] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[18746.917173] xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
[18746.917189] xhci_hcd 0000:00:10.1: System wakeup disabled by ACPI
[18746.917287] PM: noirq resume of devices complete after 14.662 msecs
[18746.917731] PM: early resume of devices complete after 0.399 msecs
[18746.917901] snd_hda_intel 0000:00:01.1: irq 86 for MSI/MSI-X
[18746.925355] sd 1:0:0:0: [sdb] Starting disk
[18746.925813] parport_pc 00:04: activated
[18746.926258] serial 00:08: activated
[18746.929416] sd 2:0:0:0: [sdc] Starting disk
[18746.931008] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[18746.931233] radeon 0000:00:01.0: WB enabled
[18746.931262] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802324cac00
[18746.931264] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8802324cac04
[18746.931266] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8802324cac08
[18746.931267] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8802324cac0c
[18746.931269] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8802324cac10
[18746.931628] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90010fb6c98
[18746.931687] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8802324cac18
[18746.931688] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8802324cac1c
[18746.933685] [drm] ring test on 0 succeeded in 2 usecs
[18746.933749] [drm] ring test on 1 succeeded in 2 usecs
[18746.933757] [drm] ring test on 2 succeeded in 2 usecs
[18746.933845] [drm] ring test on 3 succeeded in 3 usecs
[18746.933850] [drm] ring test on 4 succeeded in 3 usecs
[18746.989415] [drm] ring test on 5 succeeded in 1 usecs
[18747.009262] [drm] UVD initialized successfully.
[18747.118386] [drm] ring test on 6 succeeded in 9 usecs
[18747.118396] [drm] ring test on 7 succeeded in 4 usecs
[18747.118397] [drm] VCE initialized successfully.
[18747.118427] [drm] ib test on ring 0 succeeded in 0 usecs
[18747.240740] ata6: SATA link down (SStatus 0 SControl 300)
[18747.304721] usb 7-4: reset low-speed USB device number 2 using ohci-pci
[18747.412660] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18747.412687] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18747.414451] ata1.00: configured for UDMA/133
[18747.414640] ata3.00: configured for UDMA/100
[18747.616607] [drm] ib test on ring 1 succeeded in 0 usecs
[18748.116416] [drm] ib test on ring 2 succeeded in 0 usecs
[18748.116474] [drm] ib test on ring 3 succeeded in 0 usecs
[18748.116512] [drm] ib test on ring 4 succeeded in 0 usecs
[18748.136935] [drm] ib test on ring 5 succeeded
[18748.157401] [drm] ib test on ring 6 succeeded
[18748.157922] [drm] ib test on ring 7 succeeded
[18748.498467] PM: resume of devices complete after 1581.290 msecs
[18748.498791] PM: Finishing wakeup.
[18748.498793] Restarting tasks ... done.
[18748.518931] alx 0000:03:00.0: irq 87 for MSI/MSI-X
[18748.519068] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[18749.330208] alx 0000:03:00.0 eth0: NIC Up: 1 Gbps Full
[18749.330423] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[18752.630820] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18752.640258] ata2.00: configured for UDMA/100
[18802.004723] usb 7-5: USB disconnect, device number 4
[18802.005246] usb 7-5: ctrl urb status -62 received
[18802.006246] usb 7-5: ctrl urb status -62 received
[18805.912061] usb 8-2: new low-speed USB device number 4 using ohci-pci
[18806.089842] usb 8-2: New USB device found, idVendor=1a2c, idProduct=0021
[18806.089850] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[18806.089855] usb 8-2: Product: USB Keykoard
[18806.089859] usb 8-2: Manufacturer: USB
[18806.097476] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb8/8-2/8-2:1.0/0003:1A2C:0021.000A/input/input37
[18806.097765] hid-generic 0003:1A2C:0021.000A: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:13.0-2/input0
[18816.097424] hid-generic 0003:1A2C:0021.000B: usb_submit_urb(ctrl) failed: -1
[18816.097483] hid-generic 0003:1A2C:0021.000B: timeout initializing reports
[18816.097697] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb8/8-2/8-2:1.1/0003:1A2C:0021.000B/input/input38
[18816.097964] hid-generic 0003:1A2C:0021.000B: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:13.0-2/input1
[18863.523731] usb 7-3: new full-speed USB device number 5 using ohci-pci
[18863.700648] usb 7-3: New USB device found, idVendor=04f9, idProduct=0027
[18863.700657] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18863.700662] usb 7-3: Product: HL-2030 series
[18863.700665] usb 7-3: Manufacturer: Brother
[18863.700668] usb 7-3: SerialNumber: C6J977184
[18863.725654] usblp 7-3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[18863.725694] usbcore: registered new interface driver usblp
[18864.792978] usblp0: removed
[18864.810228] usblp 7-3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[18867.014552] usb 5-2: new high-speed USB device number 6 using ehci-pci
[18867.151268] usb 5-2: New USB device found, idVendor=04b8, idProduct=0121
[18867.151277] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[18867.151282] usb 5-2: Product: EPSON Scanner
[18867.151285] usb 5-2: Manufacturer: EPSON
[19010.488153] usb 5-2: USB disconnect, device number 6
[19019.880492] usb 5-2: new high-speed USB device number 7 using ehci-pci
[19020.017121] usb 5-2: New USB device found, idVendor=04b8, idProduct=0121
[19020.017130] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[19020.017134] usb 5-2: Product: EPSON Scanner
[19020.017138] usb 5-2: Manufacturer: EPSON
[19120.057314] usblp0: removed
[19120.824033] usblp 7-3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[19138.236397] usblp0: removed
[19139.003686] usblp 7-3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P2.40
board_vendor: ASRock
board_name: FM2A88M Extreme4+
board_version:
** Loaded modules:
usblp
joydev
cfg80211
rfkill
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
kvm_amd
kvm
crc32_pclmul
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
edac_mce_amd
psmouse
serio_raw
edac_core
pcspkr
k10temp
shpchp
i2c_piix4
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
tpm_tis
tpm
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
evdev
acpi_cpufreq
processor
vmhgfs(O)
vmw_vmci
nct6775
hwmon_vid
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sr_mod
cdrom
sg
sd_mod
crc_t10dif
crct10dif_generic
usb_storage
ohci_pci
crct10dif_pclmul
crct10dif_common
ahci
crc32c_intel
libahci
radeon
ehci_pci
ohci_hcd
xhci_hcd
ehci_hcd
i2c_algo_bit
alx
libata
mdio
ttm
drm_kms_helper
scsi_mod
drm
usbcore
usb_common
i2c_core
video
thermal_sys
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d0:50:99:44:6b:70 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.4/24 brd 192.168.1.255 scope global dynamic eth0
valid_lft 85663sec preferred_lft 85663sec
inet6 fe80::d250:99ff:fe44:6b70/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 829596323 700050 0 0 0 0 0 2616 75493734 521116 0 0 0 0 0 0
lo: 15065 129 0 0 0 0 0 0 15065 129 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1723909 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
1723873 incoming packets delivered
1086653 requests sent out
158 dropped because of missing route
Icmp:
14 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 14
12 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 12
IcmpMsg:
InType3: 14
OutType3: 12
Tcp:
13084 active connections openings
2 passive connection openings
6 failed connection attempts
161 connection resets received
1 connections established
1700080 segments received
1065715 segments send out
2941 segments retransmited
299 bad segments received.
3073 resets sent
Udp:
17771 packets received
12 packets to unknown port received.
0 packet receive errors
17956 packets sent
UdpLite:
TcpExt:
5439 TCP sockets finished time wait in fast timer
8 packets rejects in established connections because of timestamp
3368 delayed acks sent
2 delayed acks further delayed because of locked socket
Quick ack mode was activated 2317 times
1 packets directly queued to recvmsg prequeue.
1437525 packet headers predicted
57517 acknowledgments not containing data payload received
14137 predicted acknowledgments
248 times recovered from packet loss by selective acknowledgements
Detected reordering 5 times using time stamp
13 congestion windows fully recovered without slow start
7 congestion windows partially recovered using Hoe heuristic
6 congestion windows recovered without slow start by DSACK
398 congestion windows recovered without slow start after partial ack
TCPLostRetransmit: 4
18 timeouts after SACK recovery
8 timeouts in loss state
270 fast retransmits
156 forward retransmits
85 retransmits in slow start
619 other TCP timeouts
TCPLossProbes: 1585
TCPLossProbeRecovery: 522
23 SACK retransmits failed
1898 DSACKs sent for old packets
5 DSACKs sent for out of order packets
436 DSACKs received
775 connections reset due to unexpected data
21 connections reset due to early user close
51 connections aborted due to timeout
29 times unabled to send RST due to no memory
TCPDSACKIgnoredNoUndo: 150
TCPSpuriousRTOs: 14
TCPSackShiftFallback: 313
TCPRcvCoalesce: 128611
TCPOFOQueue: 126300
TCPOFOMerge: 5
TCPChallengeACK: 302
TCPSYNChallenge: 302
TCPAutoCorking: 6988
TCPSynRetrans: 433
TCPOrigDataSent: 64183
IpExt:
InMcastPkts: 445
OutMcastPkts: 465
InBcastPkts: 6070
OutBcastPkts: 44
InOctets: 2329403470
OutOctets: 100012727
InMcastOctets: 47283
OutMcastOctets: 41601
InBcastOctets: 1213382
OutBcastOctets: 2156
InNoECTPkts: 1724751
InECT0Pkts: 375
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Complex [1022:1422]
Subsystem: ASRock Incorporation Device [1849:1422]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics] [1002:130f] (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device [1849:130f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 84
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at f000 [size=256]
Region 5: Memory at ff700000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at ff740000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri HDMI/DP Audio Controller [1002:1308]
Subsystem: ASRock Incorporation Device [1849:1308]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 86
Region 0: Memory at ff764000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1424]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1424]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1424]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7814] (rev 09) (prog-if 30 [XHCI])
Subsystem: ASRock Incorporation Device [1849:7814]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff76a000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:10.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7814] (rev 09) (prog-if 30 [XHCI])
Subsystem: ASRock Incorporation Device [1849:7814]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff768000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:7801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 85
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at ff771000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7807]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff770000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:7808]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff76f000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7807]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff76e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:7808]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff76d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:780b] (rev 16)
Subsystem: ASRock Incorporation Device [1849:780b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01)
Subsystem: ASRock Incorporation Device [1849:c892]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff760000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:780e] (rev 11)
Subsystem: ASRock Incorporation Device [1849:780e]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge [1022:780f] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7809] (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7809]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ff76c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) [1022:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) [1022:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff600000-ff6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 0 [1022:141a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 1 [1022:141b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 2 [1022:141c]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 3 [1022:141d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 4 [1022:141e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 5 [1022:141f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
03:00.0 Ethernet controller [0200]: Qualcomm Atheros QCA8171 Gigabit Ethernet [1969:10a1] (rev 10)
Subsystem: ASRock Incorporation Device [1849:10a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 87
Region 0: Memory at ff600000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
** USB devices:
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 05e3:0745 Genesys Logic, Inc.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 004: ID 1a2c:0021 China Resource Semico Co., Ltd Keyboard
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 007: ID 04b8:0121 Seiko Epson Corp. GT-F500/GT-F550 [Perfection 2480/2580 PHOTO]
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 007 Device 005: ID 04f9:0027 Brother Industries, Ltd HL-2030 Laser Printer
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
Reply to: