--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: parport_pc: autodetect work, io=0x378 doesn't
- From: Jasen Betts <jasen@xnet.co.nz>
- Date: Wed, 23 Jun 2010 00:20:09 +1200
- Message-id: <20100622122009.24806.26857.reportbug@news.localnet>
Package: linux-image-2.6.30-bpo.2-686
Version: 2.6.30-7~bpo50+1
Severity: normal
I have a second parallel port that needs parport_pc parameters to
operate and works when they are given, so I need a way to either tell
parport_pc to use the autodetected port and the one I specify or tell
or be able to specify the equivalent of the autodetected port.
the followin outlines my attempts load the main parallel port driver
with explicit port numbers
if I do
# modprobe parport_pc
i get dmesg
[3443.352797] parport_pc 00:07: activated
[3443.352807] parport_pc 00:07: reported by Plug and Play ACPI
[3443.352918] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
which works
but if I do
# modprobe parport_pc io=0x378 irq=7
i get dmesg
[3988.717925] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[3988.717934] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[3988.717938] parport 0x378: You gave this address, but there is probably no parallel port there!
[3988.717960] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
which doesn't work
-- Package-specific info:
** Version:
Linux version 2.6.30-bpo.2-686 (Debian 2.6.30-7~bpo50+1) (nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Tue Sep 22 14:34:48 UTC 2009
** Command line:
auto BOOT_IMAGE=new ro root=802
** Tainted: G W (512)
** Kernel log:
[5441824.724881] [<c01c9af8>] ? sysfs_add_one+0x9a/0xad
[5441824.724888] [<c01c9f50>] ? create_dir+0x3c/0x62
[5441824.724893] [<c01c9f9f>] ? sysfs_create_dir+0x29/0x3b
[5441824.724900] [<c020033c>] ? kobject_get+0xf/0x13
[5441824.724906] [<c020043a>] ? kobject_add_internal+0xb0/0x149
[5441824.724912] [<c02005f2>] ? kobject_add+0x44/0x47
[5441824.724919] [<c026bf60>] ? device_add+0xa1/0x45d
[5441824.724926] [<c0200548>] ? kobject_set_name_vargs+0x45/0x4c
[5441824.724932] [<c026b831>] ? dev_set_name+0x14/0x15
[5441824.724938] [<c026e7cd>] ? platform_device_add+0xca/0x108
[5441824.724944] [<c026e9b2>] ? platform_device_register_simple+0x34/0x4a
[5441824.724956] [<f8db395f>] ? parport_pc_probe_port+0x32/0x790 [parport_pc]
[5441824.724966] [<f8dbb2a1>] ? parport_pc_init+0x20d/0x330 [parport_pc]
[5441824.724976] [<f8dbb094>] ? parport_pc_init+0x0/0x330 [parport_pc]
[5441824.724982] [<c010113e>] ? do_one_initcall+0x55/0x155
[5441824.724989] [<c0147309>] ? sys_init_module+0x87/0x187
[5441824.724995] [<c0102ff4>] ? sysenter_do_call+0x12/0x28
[5441824.724999] ---[ end trace 26bc3dd30d1f3d78 ]---
[5441824.725005] kobject_add_internal failed for parport_pc.888 with -EEXIST, don't try to register things with the same name in the same directory.
[5441824.725011] Pid: 23314, comm: modprobe Tainted: G W 2.6.30-bpo.2-686 #1
[5441824.725015] Call Trace:
[5441824.725020] [<c02004c3>] ? kobject_add_internal+0x139/0x149
[5441824.725026] [<c02005f2>] ? kobject_add+0x44/0x47
[5441824.725032] [<c026bf60>] ? device_add+0xa1/0x45d
[5441824.725038] [<c0200548>] ? kobject_set_name_vargs+0x45/0x4c
[5441824.725044] [<c026b831>] ? dev_set_name+0x14/0x15
[5441824.725049] [<c026e7cd>] ? platform_device_add+0xca/0x108
[5441824.725055] [<c026e9b2>] ? platform_device_register_simple+0x34/0x4a
[5441824.725065] [<f8db395f>] ? parport_pc_probe_port+0x32/0x790 [parport_pc]
[5441824.725075] [<f8dbb2a1>] ? parport_pc_init+0x20d/0x330 [parport_pc]
[5441824.725085] [<f8dbb094>] ? parport_pc_init+0x0/0x330 [parport_pc]
[5441824.725090] [<c010113e>] ? do_one_initcall+0x55/0x155
[5441824.725096] [<c0147309>] ? sys_init_module+0x87/0x187
[5441824.725102] [<c0102ff4>] ? sysenter_do_call+0x12/0x28
[5441835.154724] ppdev0: registered pardevice
[5441837.682164] ppdev0: released pardevice because user-space forgot
[5441837.682173] ppdev0: unregistered pardevice
[5441871.493019] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
[5441876.499683] ppdev0: registered pardevice
[5441877.634498] ppdev0: released pardevice because user-space forgot
[5441877.634507] ppdev0: unregistered pardevice
[5441891.846929] parport_pc: `0xc800' invalid for parameter `io'
[5441901.843034] parport_pc: `0xc800' invalid for parameter `io'
[5441906.387319] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
[5441911.940516] parport_pc 00:07: activated
[5441911.940525] parport_pc 00:07: reported by Plug and Play ACPI
[5441911.940639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5441925.768558] parport_pc 00:07: disabled
[5441925.791800] parport_pc 00:07: activated
[5441925.791810] parport_pc 00:07: reported by Plug and Play ACPI
[5441925.791922] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5441935.224187] parport_pc 00:07: disabled
[5441935.248738] parport_pc 00:07: activated
[5441935.248747] parport_pc 00:07: reported by Plug and Play ACPI
[5441935.248860] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5441944.405268] parport_pc 00:07: disabled
[5441944.413204] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
[5441957.823071] parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
[5441983.652960] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[5441983.652969] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[5441983.652972] parport 0x378: You gave this address, but there is probably no parallel port there!
[5441983.652995] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[5441983.752241] parport1: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
[5441995.227590] parport_pc 00:07: activated
[5441995.227599] parport_pc 00:07: reported by Plug and Play ACPI
[5441995.227711] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5442063.952737] parport_pc 00:07: disabled
[5442063.963515] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[5442063.963524] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[5442063.963528] parport 0x378: You gave this address, but there is probably no parallel port there!
[5442063.963552] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[5442070.441724] parport_pc 00:07: activated
[5442070.441732] parport_pc 00:07: reported by Plug and Play ACPI
[5442070.441844] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5442099.048745] parport_pc 00:07: disabled
[5442099.058528] parport_pc: `ACPI' invalid for parameter `io'
[5443126.484193] parport_pc 00:07: activated
[5443126.484203] parport_pc 00:07: reported by Plug and Play ACPI
[5443126.484318] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5443175.681270] parport_pc 00:07: disabled
[5443175.689460] parport_pc: `' invalid for parameter `io'
[5443185.401398] parport_pc 00:07: activated
[5443185.401408] parport_pc 00:07: reported by Plug and Play ACPI
[5443185.401521] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[5443204.481240] parport_pc 00:07: disabled
[5443204.491628] parport 0x30a (WARNING): CTR: wrote 0x0c, read 0xff
[5443204.491636] parport 0x30a (WARNING): DATA: wrote 0xaa, read 0xff
[5443204.491640] parport 0x30a: You gave this address, but there is probably no parallel port there!
[5443204.491655] parport0: PC-style at 0x30a [PCSPP,TRISTATE]
[5443215.683622] parport 0x778 (WARNING): CTR: wrote 0x0c, read 0xff
[5443215.683631] parport 0x778 (WARNING): DATA: wrote 0xaa, read 0xff
[5443215.683635] parport 0x778: You gave this address, but there is probably no parallel port there!
[5443215.683658] parport0: PC-style at 0x778 [PCSPP,TRISTATE]
[5443224.198819] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[5443224.198827] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[5443224.198831] parport 0x378: You gave this address, but there is probably no parallel port there!
[5443224.198855] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[5443249.318747] parport_pc 00:07: activated
[5443249.318754] parport_pc 00:07: reported by Plug and Play ACPI
[5443249.318864] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
** Loaded modules:
Module Size Used by
parport_pc 22392 0
isofs 27592 0
udf 67044 0
nls_base 6416 2 isofs,udf
crc_itu_t 2148 1 udf
ppdev 6348 0
parport 31144 2 parport_pc,ppdev
ppp_deflate 3944 0
zlib_deflate 17588 1 ppp_deflate
bsd_comp 4908 0
ppp_async 7512 0
crc_ccitt 1816 1 ppp_async
ppp_generic 21424 3 ppp_deflate,bsd_comp,ppp_async
slhc 5012 1 ppp_generic
i915 149008 2
drm 137736 3 i915
i2c_algo_bit 4860 1 i915
video 18060 1 i915
output 2604 1 video
acpi_cpufreq 7608 0
cpufreq_stats 3520 0
cpufreq_conservative 6256 0
cpufreq_powersave 1292 0
cpufreq_userspace 2740 0
ext3 106880 0
jbd 40860 1 ext3
coretemp 5176 0
w83627ehf 17204 0
hwmon_vid 2480 1 w83627ehf
loop 13292 0
snd_hda_codec_realtek 178576 1
snd_hda_intel 22196 5
snd_hda_codec 63596 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6120 1 snd_hda_codec
snd_pcm_oss 32240 0
snd_mixer_oss 12372 1 snd_pcm_oss
snd_pcm 62396 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 5688 0
snd_rawmidi 18596 1 snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
evdev 8032 7
snd_seq 42308 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17440 3 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 37496 0
i2c_i801 8580 0
i2c_core 20808 4 i915,drm,i2c_algo_bit,i2c_i801
serio_raw 4560 0
pcspkr 2104 0
rng_core 3672 0
snd 49044 19 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
atl2 22976 0
asus_atk0110 6616 0
processor 34496 1 acpi_cpufreq
button 5060 0
soundcore 6184 1 snd
snd_page_alloc 8120 2 snd_hda_intel,snd_pcm
ext4 196828 6
mbcache 6928 2 ext3,ext4
jbd2 49980 1 ext4
crc16 1760 1 ext4
dm_mirror 12560 0
dm_region_hash 10636 1 dm_mirror
dm_log 8464 2 dm_mirror,dm_region_hash
dm_snapshot 21692 0
dm_mod 49864 3 dm_mirror,dm_log,dm_snapshot
sg 20288 0
sr_mod 13260 0
cdrom 30316 1 sr_mod
sd_mod 28684 8
crc_t10dif 1632 1 sd_mod
ide_pci_generic 3632 0
ata_generic 4340 0
usbhid 31476 0
hid 34464 1 usbhid
ata_piix 20808 8
libata 150788 2 ata_generic,ata_piix
piix 5708 0
scsi_mod 131584 4 sg,sr_mod,sd_mod,libata
ide_core 87696 2 ide_pci_generic,piix
uhci_hcd 19072 0
e100 27420 0
mii 4664 1 e100
ehci_hcd 29636 0
usbcore 125876 4 usbhid,uhci_hcd,ehci_hcd
intel_agp 23116 1
agpgart 30856 3 drm,intel_agp
floppy 46228 0
thermal 12576 0
fan 4044 0
thermal_sys 13140 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at cfb00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 7800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at cfb80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8290]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at cfbf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 8000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 8400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 8800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfbffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: cfc00000-cfefffff
Prefetchable memory behind bridge: 00000000eff00000-00000000efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at a800 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation 82558B PRO/100+ PCI (TP) [8086:0009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at effff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at b400 [size=32]
Region 2: Memory at cfd00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at cfc00000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
01:01.0 Serial controller [0700]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 02 [16550])
Subsystem: Device [a000:1000]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at b800 [size=8]
Region 1: Memory at cfefb000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfefa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:01.1 Serial controller [0700]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 02 [16550])
Subsystem: Device [a000:1000]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: Memory at cfefd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfefc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:01.2 Parallel controller [0701]: NetMos Technology PCI 9865 Multi-I/O Controller [9710:9865] (prog-if 03 [IEEE1284])
Subsystem: Device [a000:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 16 bytes
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at c800 [size=8]
Region 1: I/O ports at c400 [size=8]
Region 2: Memory at cfeff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfefe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at cffc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at cffa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
-- System Information:
Debian Release: squeeze/sid
APT prefers stable
APT policy: (700, 'stable'), (650, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-bpo.2-686 (SMP w/2 CPU cores)
Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-bpo.2-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-bpo.2-686 recommends:
ii libc6-i686 2.7-18lenny2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-bpo.2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-7 LInux LOader - The Classic OS load
ii linux-doc-2.6.30 2.6.30-8squeeze1 Linux kernel specific documentatio
-- debconf-show failed
--- End Message ---