[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#718312: linux-image-3.10-1-amd64: Kernel panic crashes drm_kms_helper causing hard lockup



Package: src:linux
Version: 3.10.3-1
Severity: important

Dear Maintainer,

once on 3.10.1-1 and once on 3.10.3-1 I have had a kernel panic that crashed
drm_kms_helper and resulted in complete system hang. In each case, the system
had resumed from S3 suspend about 30 minutes to an hour beforehand.

The system was completely stable with 3.9 and earlier. Hardware is an Asus
P8H77-I with Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz, that is, an Ivy Bridge
integrated GPU using the i915 driver.

After resume, there is also a mei_me crapflood in dmesg. I will append some of
this as mei_timer is mentioned in the Workqueue.

Console photo attached.

Kind regards,
Ben.



-- Package-specific info:
** Version:
Linux version 3.10-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-6) ) #1 SMP Debian 3.10.3-1 (2013-07-27)

** Command line:
BOOT_IMAGE=/vmlinuz-3.10-1-amd64 root=/dev/mapper/vg-root ro quiet splash

** Not tainted

** Kernel log:
[    1.575958] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[    1.673605] usb 4-1.5: New USB device found, idVendor=046d, idProduct=c040
[    1.673609] usb 4-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    1.673611] usb 4-1.5: Product: USB-PS/2 Optical Mouse
[    1.673613] usb 4-1.5: Manufacturer: Logitech
[    1.675600] hidraw: raw HID events driver (C) Jiri Kosina
[    1.678644] usbcore: registered new interface driver usbhid
[    1.678646] usbhid: USB HID core driver
[    1.679874] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input3
[    1.679955] hid-generic 0003:046D:C040.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    1.743796] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[    1.816013] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    1.841692] usb 4-1.6: New USB device found, idVendor=046d, idProduct=c313
[    1.841696] usb 4-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    1.841699] usb 4-1.6: Product: USB Multimedia Keyboard
[    1.841701] usb 4-1.6: Manufacturer: BTC
[    1.844756] input: BTC USB Multimedia Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input4
[    1.844825] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10
Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1.6/input0
[    1.851754] input: BTC USB Multimedia Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input5
[    1.851862] hid-generic 0003:046D:C313.0003: input,hiddev0,hidraw2: USB HID
v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1.6/input1
[    1.923617] usb 4-1.7: new high-speed USB device number 5 using ehci-pci
[    1.934988] device-mapper: uevent: version 1.0.3
[    1.935094] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-
devel@redhat.com
[    2.149812] usb 4-1.7: New USB device found, idVendor=046d, idProduct=0804
[    2.149817] usb 4-1.7: New USB device strings: Mfr=0, Product=0,
SerialNumber=2
[    2.149820] usb 4-1.7: SerialNumber: 2A4ACC60
[    9.851455] bio: create slab <bio-1> at 1
[    9.907808] bio: create slab <bio-1> at 1
[   10.003270] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[   10.003274] EXT4-fs (dm-1): write access will be enabled during recovery
[   10.360954] EXT4-fs (dm-1): orphan cleanup on readonly fs
[   10.360964] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode
5044
[   10.361051] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode
391359
[   10.361080] EXT4-fs (dm-1): 2 orphan inodes deleted
[   10.361081] EXT4-fs (dm-1): recovery complete
[   10.363878] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
(null)
[   10.670632] udevd[505]: starting version 175
[   10.786636] ACPI: Requesting acpi_cpufreq
[   10.788147] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.791268] mei_me 0000:00:16.0: setting latency timer to 64
[   10.791320] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   10.805827] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO
conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[   10.805840] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[   10.810975] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   10.810987] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[   10.810992] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   10.810999] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[   10.811002] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   10.811009] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[   10.811012] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.839824] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[   10.850919] iTCO_vendor_support: vendor-support=0
[   10.853032] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   10.853058] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[   10.853137] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.853207] platform microcode: firmware: agent loaded intel-ucode/06-3a-09
into memory
[   10.853222] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[   10.853234] platform microcode: firmware: agent loaded intel-ucode/06-3a-09
into memory
[   10.853243] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[   10.853251] platform microcode: firmware: agent loaded intel-ucode/06-3a-09
into memory
[   10.853257] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[   10.853264] platform microcode: firmware: agent loaded intel-ucode/06-3a-09
into memory
[   10.853298] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.866956] asus_wmi: ASUS WMI generic driver loaded
[   10.868895] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
[   10.868969] asus_wmi: SFUN value: 0x0<6>[   10.869355] input: Eee PC WMI
hotkeys as /devices/platform/eeepc-wmi/input/input7
[   10.870039] asus_wmi: Backlight controlled by ACPI video driver
[   10.876957] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.888589] media: Linux media interface: v0.10
[   10.892634] Linux video capture interface: v2.00
[   10.900597] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.900710] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.900790] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.900874] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.900946] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.901015] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.187091] usb_audio: Warning! Unlikely big volume range (=6144), cval->res
is probably wrong.
[   11.187104] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val =
1536/7680/1<6>[   11.187265] usbcore: registered new interface driver snd-usb-
audio
[   11.187305] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804)
[   11.202590] input: UVC Camera (046d:0804) as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input14
[   11.202649] usbcore: registered new interface driver uvcvideo
[   11.202650] USB Video Class driver (1.1.1)
[   11.467706] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   11.512423] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   11.706855] fuse init (API version 7.22)
[   11.726975] loop: module loaded
[   12.071730] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
errors=remount-ro
[   12.074658] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
errors=remount-ro
[   13.097944] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.107358] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   13.123746] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.215002] lp: driver loaded but no devices found
[   13.225848] ppdev: user-space parallel port driver
[   13.509695] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168f-1.fw
into memory
[   13.607080] r8169 0000:03:00.0 eth0: link down
[   13.607093] r8169 0000:03:00.0 eth0: link down
[   13.607147] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.103688] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[   15.288209] r8169 0000:03:00.0 eth0: link up
[   15.288360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0904
board_vendor: ASUSTeK COMPUTER INC.
board_name: P8H77-I
board_version: Rev X.0x

** Loaded modules:
parport_pc
cpufreq_stats
cpufreq_conservative
ppdev
cpufreq_userspace
cpufreq_powersave
lp
parport
ip6t_REJECT
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
ipt_REJECT
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
uinput
iptable_filter
ip_tables
x_tables
loop
fuse
uvcvideo
snd_usb_audio
videobuf2_vmalloc
snd_hda_codec_hdmi
videobuf2_memops
snd_usbmidi_lib
videobuf2_core
snd_seq_midi
videodev
snd_seq_midi_event
snd_hda_codec_via
media
snd_rawmidi
coretemp
snd_hda_intel
snd_hda_codec
kvm_intel
eeepc_wmi
asus_wmi
snd_hwdep
sparse_keymap
kvm
snd_pcm
rfkill
snd_page_alloc
snd_seq
snd_seq_device
iTCO_wdt
snd_timer
iTCO_vendor_support
microcode
snd
mperf
soundcore
lpc_ich
psmouse
i2c_i801
mfd_core
mei_me
pcspkr
processor
serio_raw
mei
evdev
ext4
crc16
jbd2
mbcache
sha256_generic
cbc
dm_crypt
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crc32c_intel
ahci
libahci
libata
scsi_mod
ehci_pci
ehci_hcd
xhci_hcd
ghash_clmulni_intel
r8169
cryptd
mii
wmi
fan
i915
video
i2c_algo_bit
drm_kms_helper
drm
i2c_core
usbcore
thermal
thermal_sys
usb_common
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor DRAM Controller [8086:0150] (rev 09)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA
controller])
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at f7c1a000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7c18000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:8415]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7c17000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller
[8086:1e4a] (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01
[AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 44
        Region 0: I/O ports at f0b0 [size=8]
        Region 1: I/O ports at f0a0 [size=4]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at f7c16000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:84ca]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7c15000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
        Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:8505]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 41
        Region 0: I/O ports at e000 [size=256]
        Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169



** USB devices:
Bus 004 Device 005: ID 046d:0804 Logitech, Inc. Webcam C250
Bus 004 Device 004: ID 046d:c313 Logitech, Inc. Internet 350 Keyboard
Bus 004 Device 003: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.10-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.50
ii  initramfs-tools [linux-initramfs-tool]  0.113
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.10-1-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.10-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-15
pn  linux-doc-3.10          <none>

Versions of packages linux-image-3.10-1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
ii  firmware-brcm80211      0.39
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.39
ii  firmware-linux-nonfree  0.39
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.39
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.10-1-amd64/postinst/depmod-error-initrd-3.10-1-amd64: false
  linux-image-3.10-1-amd64/prerm/removing-running-kernel-3.10-1-amd64: true
  linux-image-3.10-1-amd64/postinst/ignoring-ramdisk:
  linux-image-3.10-1-amd64/postinst/missing-firmware-3.10-1-amd64:

Attachment: img_20130730_062950.jpg
Description: JPEG image


Reply to: