--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.36-rc6-686-bigmem: Closing laptop lid hangs the system on Dell studio 1555
- From: Thibault Manlay <spam@thibland.net>
- Date: Fri, 26 Aug 2011 02:46:33 +0200
- Message-id: <20110826004633.4400.55024.reportbug@pollux.thibland.net>
Package: linux-2.6
Version: 2.6.36~rc6-1~experimental.1
Severity: important
Tags: upstream
Hello,
I have a problem occurring for some time now, my system hangs each time I close the lid of my laptop (Dell studio 1555) whether I'm on a tty or in a X session, and the only solution is to restart manually the system (power button). This also happens in single boot mode.
I found a workaround to prevent the system hanging, which is to boot with the 'nolapic' kernel option. I assume this issue would be APIC-based. The option disables others CPU cores which is a bit problematic.
I'm running Debian testing.
This problem was not present in the 2.6.32 version and appeared in the 2.6.38 version. I had not much time to determine at which version this problem began to be present but now I have time I had a closer look.
I installed some versions of 'old' Debian kernel packages I found on <http://snapshot.debian.org/> and I determined that the issue appeared between linux-image-2.6.35-trunk-686-bigmem (2.6.35-1~experimental.3) and linux-image-2.6.36-rc6-686-bigmem (2.6.36~rc6-1~experimental.1). Everything works fine in 2.6.35-trunk and issue in 2.6.36-rc6.
I checked the configurations difference but found nothing pertinent.
Hope this will help.
Thanks in advance,
--
Thibault Manlay
-- Configuration diff:
--- /boot/config-2.6.35-trunk-686-bigmem 2010-09-06 21:19:30.000000000 +0200
+++ /boot/config-2.6.36-rc6-686-bigmem 2010-10-04 13:52:52.000000000 +0200
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.35
-# Mon Sep 6 16:49:05 2010
+# Linux kernel version: 2.6.36-rc6
+# Mon Oct 4 09:18:53 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
@@ -10,7 +10,6 @@
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -93,14 +92,13 @@
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -144,7 +142,7 @@
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -173,7 +171,6 @@
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
@@ -195,13 +192,12 @@
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -278,6 +274,7 @@
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
+CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
@@ -313,10 +310,8 @@
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
-# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
-# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
@@ -386,7 +381,6 @@
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
@@ -461,6 +455,7 @@
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
@@ -483,6 +478,7 @@
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
# CONFIG_ACPI_APEI_EINJ is not set
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
@@ -501,7 +497,6 @@
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -539,7 +534,7 @@
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_INTEL_IDLE=m
+# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
@@ -548,7 +543,6 @@
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
@@ -680,13 +674,7 @@
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_HYBLA is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_VENO is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
@@ -716,6 +704,7 @@
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
@@ -728,7 +717,6 @@
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
@@ -759,12 +747,14 @@
#
# Xtables targets
#
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
@@ -787,6 +777,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -794,6 +785,7 @@
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -1073,6 +1065,7 @@
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
+CONFIG_DNS_RESOLVER=y
CONFIG_RPS=y
#
@@ -1127,6 +1120,7 @@
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
@@ -1187,7 +1181,6 @@
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
-CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
@@ -1205,6 +1198,7 @@
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
@@ -1244,9 +1238,9 @@
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
@@ -1394,7 +1388,6 @@
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
@@ -1511,7 +1504,7 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=m
-# CONFIG_AD525X_DPOT_I2C is not set
+CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
@@ -1526,9 +1519,12 @@
CONFIG_HP_ILO=m
CONFIG_ISL29003=m
CONFIG_SENSORS_TSL2550=m
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
+# CONFIG_BMP085 is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
@@ -1672,6 +1668,7 @@
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
@@ -1892,8 +1889,6 @@
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
@@ -1934,6 +1929,7 @@
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_IEEE1394 is not set
+CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
@@ -2123,6 +2119,8 @@
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF_DEPENDS=y
+CONFIG_CHELSIO_T4VF=m
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
@@ -2253,7 +2251,7 @@
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_ORINOCO_USB is not set
+CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
@@ -2287,7 +2285,8 @@
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL1271=m
-# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SPI=m
+CONFIG_WL1271_SDIO=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
@@ -2406,6 +2405,10 @@
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
+
+#
+# CAIF transport drivers
+#
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
@@ -2531,6 +2534,7 @@
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_MAX7359=m
+# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
@@ -2595,8 +2599,10 @@
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
-CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
@@ -2610,6 +2616,7 @@
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
+# CONFIG_TOUCHSCREEN_QT602240 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_WM97XX=m
@@ -2632,7 +2639,7 @@
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=m
@@ -2654,6 +2661,7 @@
CONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
#
# Hardware I/O ports
@@ -2729,6 +2737,8 @@
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
@@ -2788,11 +2798,12 @@
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
-# CONFIG_RAMOOPS is not set
+CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
@@ -2886,7 +2897,7 @@
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
+CONFIG_PPS_CLIENT_LDISC=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -2995,9 +3006,11 @@
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_PKGTEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
@@ -3022,8 +3035,10 @@
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SIS5595=m
+# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
+# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
@@ -3069,6 +3084,7 @@
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
+# CONFIG_F71808E_WDT is not set
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
@@ -3082,6 +3098,7 @@
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
+# CONFIG_HPWDT_NMI_DECODING is not set
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
@@ -3155,6 +3172,7 @@
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_TPS6586X is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
@@ -3171,6 +3189,8 @@
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
CONFIG_MEDIA_SUPPORT=m
#
@@ -3190,13 +3210,18 @@
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
+CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
-# CONFIG_IR_IMON is not set
+CONFIG_IR_LIRC_CODEC=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ENE=m
+CONFIG_IR_STREAMZAP=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
@@ -3264,6 +3289,7 @@
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
+CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_PMS=m
@@ -3348,8 +3374,10 @@
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
@@ -3374,15 +3402,9 @@
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -3968,6 +3990,7 @@
#
CONFIG_HID_3M_PCT=m
CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX_FF=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CANDO=m
@@ -3978,6 +4001,7 @@
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EGALAX=m
+CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
@@ -4138,7 +4162,7 @@
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
@@ -4161,7 +4185,8 @@
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
-# CONFIG_USB_SERIAL_ZIO is not set
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
@@ -4293,7 +4318,7 @@
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
-# CONFIG_INFINIBAND_CXGB4 is not set
+CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
@@ -4347,9 +4372,11 @@
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
+# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
+# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
@@ -4401,9 +4428,11 @@
#
# DMA Devices
#
+# CONFIG_INTEL_MID_DMAC is not set
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
+# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
#
@@ -4421,7 +4450,7 @@
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
-# CONFIG_UIO_NETX is not set
+CONFIG_UIO_NETX=m
#
# Xen driver support
@@ -4432,6 +4461,7 @@
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_PLATFORM_PCI=y
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_ET131X=m
@@ -4447,6 +4477,8 @@
# CONFIG_W35UND is not set
CONFIG_PRISM2_USB=m
# CONFIG_ECHO is not set
+CONFIG_BRCM80211=m
+CONFIG_BRCM80211_PCI=y
# CONFIG_RT2860 is not set
# CONFIG_RT2870 is not set
CONFIG_COMEDI=m
@@ -4537,6 +4569,7 @@
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
@@ -4544,18 +4577,12 @@
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
-CONFIG_RAMZSWAP=m
-CONFIG_RAMZSWAP_STATS=y
+CONFIG_ZRAM=m
+CONFIG_ZRAM_STATS=y
# CONFIG_BATMAN_ADV is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_FB_SM7XX is not set
-# CONFIG_DT3155 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set
@@ -4567,6 +4594,22 @@
# CONFIG_ST_BT is not set
# CONFIG_ADIS16255 is not set
# CONFIG_FB_XGI is not set
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_I2C=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_IT87=m
+CONFIG_LIRC_ITE8709=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_TTUSBIR=m
+CONFIG_LIRC_ZILOG=m
+# CONFIG_EASYCAP is not set
+# CONFIG_SOLO6X10 is not set
+# CONFIG_ACPI_QUICKSTART is not set
#
# Speakup console speech
@@ -4601,6 +4644,7 @@
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
+# CONFIG_IDEAPAD_ACPI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
@@ -4618,6 +4662,7 @@
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
+# CONFIG_INTEL_IPS is not set
#
# Firmware Drivers
@@ -4630,7 +4675,7 @@
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+CONFIG_ISCSI_IBFT=m
#
# File systems
@@ -4686,8 +4731,8 @@
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
@@ -4785,7 +4830,8 @@
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTRS=y
+CONFIG_SQUASHFS_XATTR=y
+# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
@@ -4812,6 +4858,8 @@
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
@@ -4838,6 +4886,7 @@
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
+# CONFIG_CIFS_FSCACHE is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
@@ -4942,7 +4991,8 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
@@ -4969,6 +5019,7 @@
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
@@ -5011,17 +5062,12 @@
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
@@ -5087,9 +5133,9 @@
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_TOMOYO=y
+# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
@@ -5099,6 +5145,7 @@
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
+# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
@@ -5117,10 +5164,11 @@
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_TESTS=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
@@ -5234,6 +5282,7 @@
#
# Library routines
#
+CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
-- Package-specific info:
** Version:
Linux version 2.6.36-rc6-686-bigmem (Debian 2.6.36~rc6-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Oct 4 11:07:12 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc6-686-bigmem root=UUID=a9df537a-10af-4195-880f-c09684edccf0 ro resume=/dev/sda2
** Not tainted
** Kernel log:
[ 1.621774] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[ 1.621838] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.626050] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD18, max UDMA/100
[ 1.631596] ata1.00: configured for UDMA/133
[ 1.631749] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
[ 1.639814] ata2.00: configured for UDMA/100
[ 1.641518] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640S HD18 PQ: 0 ANSI: 5
[ 1.651318] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.651441] sd 0:0:0:0: [sda] Write Protect is off
[ 1.651504] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.651526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.657174] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 1.657243] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.657373] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.699065] sda: sda1 sda2 sda3
[ 1.699418] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.704911] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.705001] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.231197] PM: Starting manual resume from disk
[ 2.231265] PM: Resume from partition 8:2
[ 2.231266] PM: Checking hibernation image.
[ 2.231383] PM: Error -22 checking image file
[ 2.231384] PM: Resume from disk failed.
[ 2.262304] EXT3-fs: barriers not enabled
[ 2.264210] kjournald starting. Commit interval 5 seconds
[ 2.264224] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.086065] <30>udevd[326]: starting version 172
[ 4.876399] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.876474] ACPI: Power Button [PWRB]
[ 4.876574] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.876643] ACPI: Sleep Button [SLPB]
[ 4.876738] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 4.877538] ACPI: Lid Switch [LID0]
[ 4.877641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.877711] ACPI: Power Button [PWRF]
[ 4.980325] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 4.980401] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
[ 4.986690] ACPI: acpi_idle registered with cpuidle
[ 4.998684] Monitor-Mwait will be used to enter C-1 state
[ 4.999766] Monitor-Mwait will be used to enter C-2 state
[ 4.999787] Monitor-Mwait will be used to enter C-3 state
[ 4.999792] Marking TSC unstable due to TSC halts in idle
[ 4.999887] Switching to clocksource hpet
[ 5.013241] ACPI: Battery Slot [BAT0] (battery present)
[ 5.112141] ACPI: AC Adapter [ADP1] (on-line)
[ 5.112455] ACPI: WMI: Mapper loaded
[ 5.152941] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 5.331678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.348362] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 5.348436] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [??? 0x00001c00-0x00001c0f flags 0x49]
[ 5.348507] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.402163] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.453132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.569164] Linux video capture interface: v2.00
[ 5.783392] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea)
[ 5.788204] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input7
[ 5.788321] usbcore: registered new interface driver uvcvideo
[ 5.788386] USB Video Class driver (v0.1.0)
[ 5.874565] cfg80211: Calling CRDA to update world regulatory domain
[ 5.982066] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 5.982236] r852: driver loaded succesfully
[ 6.211535] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 6.254009] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 6.345965] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.346050] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.346167] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.346237] iwlagn 0000:04:00.0: setting latency timer to 64
[ 6.346275] iwlagn 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.368095] iwlagn 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 6.368168] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.368375] iwlagn 0000:04:00.0: irq 41 for MSI/MSI-X
[ 6.485421] iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
[ 6.588565] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.588698] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 6.588725] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.631303] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.643330] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.657164] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.657304] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.657426] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.657646] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.657803] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 6.657829] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.602085] Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k
[ 8.934340] EXT3-fs (sda1): using internal journal
[ 9.101260] loop: module loaded
[ 9.919330] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 11.688923] tg3 0000:08:00.0: irq 44 for MSI/MSI-X
[ 11.804413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.819177] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 14.819244] tg3 0000:08:00.0: eth0: Flow control is off for TX and off for RX
[ 14.819431] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.128253] fuse init (API version 7.15)
[ 18.504757] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 20.181876] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.680479] apm: BIOS not found.
[ 24.223173] lp: driver loaded but no devices found
[ 24.278546] ppdev: user-space parallel port driver
[ 55.796202] CE: hpet increased min_delta_ns to 7500 nsec
[ 62.796222] CE: hpet increased min_delta_ns to 11250 nsec
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 4547 1
mperf 967 1 acpi_cpufreq
cpufreq_conservative 6190 0
cpufreq_powersave 614 0
cpufreq_userspace 1508 0
cpufreq_stats 1934 0
parport_pc 15705 0
ppdev 4475 0
lp 5806 0
parport 21222 3 parport_pc,ppdev,lp
binfmt_misc 4982 1
uinput 5026 1
fuse 47318 1
ext4 233438 1
jbd2 48151 1 ext4
crc16 1035 1 ext4
coretemp 3639 0
firewire_sbp2 9729 0
loop 10192 0
snd_hda_codec_atihdmi 1703 1
snd_hda_codec_idt 37337 1
arc4 1002 2
snd_hda_intel 16649 0
snd_hda_codec 55937 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
ecb 1413 2
snd_hwdep 4038 1 snd_hda_codec
iwlagn 94944 0
snd_pcm 47052 2 snd_hda_intel,snd_hda_codec
joydev 6976 0
snd_seq 34720 0
snd_timer 12485 2 snd_pcm,snd_seq
snd_seq_device 3659 1 snd_seq
iwlcore 53071 1 iwlagn
mac80211 143835 2 iwlagn,iwlcore
r852 7428 0
sm_common 2822 1 r852
nand 27235 2 r852,sm_common
snd 34129 8 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
cfg80211 98071 3 iwlagn,iwlcore,mac80211
dell_laptop 4620 0
serio_raw 2902 0
uvcvideo 45321 0
nand_ids 2573 1 nand
nand_ecc 2996 1 nand
soundcore 3426 1 snd
rfkill 10822 2 cfg80211,dell_laptop
videodev 45542 1 uvcvideo
v4l1_compat 10366 2 uvcvideo,videodev
psmouse 38333 0
shpchp 18179 0
dcdbas 3812 1 dell_laptop
snd_page_alloc 5141 2 snd_hda_intel,snd_pcm
i2c_i801 6346 0
mtd 12474 2 sm_common,nand
pci_hotplug 16971 1 shpchp
i2c_core 12934 2 videodev,i2c_i801
evdev 5519 17
dell_wmi 2207 0
wmi 6073 1 dell_wmi
processor 22799 3 acpi_cpufreq
video 15297 0
ac 1656 0
battery 4130 0
output 1212 1 video
button 3610 0
ext3 92425 1
jbd 31932 1 ext3
mbcache 3776 2 ext4,ext3
sg 15867 0
sd_mod 24194 4
sr_mod 11037 0
crc_t10dif 1020 1 sd_mod
cdrom 25872 1 sr_mod
uhci_hcd 15830 0
ahci 16601 3
libahci 13300 1 ahci
libata 115668 2 ahci,libahci
ehci_hcd 28265 0
sdhci_pci 4969 0
sdhci 12252 1 sdhci_pci
firewire_ohci 19391 0
mmc_core 44512 1 sdhci
scsi_mod 128128 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
thermal 9458 0
thermal_sys 9328 3 processor,video,thermal
firewire_core 35472 2 firewire_sbp2,firewire_ohci
tg3 94587 0
usbcore 95106 4 uvcvideo,uhci_hcd,ehci_hcd
led_class 1567 1 sdhci
libphy 12048 1 tg3
crc_itu_t 1039 1 firewire_core
nls_base 4521 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fc0fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at fc504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fc100000-fc1fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Memory behind bridge: fc200000-fc2fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 18f0 [size=8]
Region 1: I/O ports at 18e4 [size=4]
Region 2: I/O ports at 18e8 [size=8]
Region 3: I/O ports at 18e0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at fc504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0200000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M92 [Mobility Radeon HD 4500/5100 Series] [1002:9553] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: Dell Device [1028:02be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
09:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc200800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
09:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Dell Device [1028:02be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc201400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0c45:63ea Microdia
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.36-rc6-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.utf8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.36-rc6-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
pn initramfs-tools | linux-initr <none> (no description available)
ii linux-base 3.3 Linux image base package
pn module-init-tools <none> (no description available)
Versions of packages linux-image-2.6.36-rc6-686-bigmem recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.13-16 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.36-rc6-686-bigmem suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.36 <none> (no description available)
Versions of packages linux-image-2.6.36-rc6-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.33 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.33 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---