Bug#714119: nouveau: upgrade to jessie causes console hard lockup during boot
Package: src:linux
Version: 3.9.6-1
Severity: important
Dear Maintainer,
After "apt-get dist-upgrade" from Wheezy to Jessie, could not reboot with the
new linux 3.9 kernel. The boot appeared to stop, with the console hung,
shortly after loading the nouveau graphics driver.
The lspci info for my graphics card is:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:10c3] (rev a2)
Booting with the linux-image-3.2.0-4-amd64 kernel from Wheezy still worked.
Blacklisting the nouveau module also worked (the vesa driver was then loaded
and works OK).
Subsequent testing showed that the problem is repeatable using:
modprobe nouveau
after boot (but without X loaded -- I didn't try with X loaded).
When this is done (for example using a network connection), the
modprobe returns successfully but the console has locked up. The previous
console contents are still displayed except that the first line has been
corrupted -- the corruption varies but always seems to include a purple square
towards the left hand side of the first line.
The dmesg entries from the "modprobe nouveau" are as follows:
[ 483.997015] [drm] Initialized drm 1.1.0 20060810
[ 484.011656] MXM: GUID detected in BIOS
[ 484.013307] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8180b1
[ 484.013367] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 484.013420] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 484.014470] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 484.082515] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 484.082572] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 484.082801] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 484.082856] nouveau [ VBIOS][0000:01:00.0] version 70.18.7e.00.00
[ 484.083363] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 484.083415] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 484.083467] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 485.368607] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 485.368670] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 485.368726] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 485.368784] nouveau [ PTHERM][0000:01:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
[ 485.369005] [TTM] Zone kernel: Available graphics memory: 4057562 kiB
[ 485.369059] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 485.369112] [TTM] Initializing pool allocator
[ 485.369169] [TTM] Initializing DMA pool allocator
[ 485.383683] nouveau [ DRM] VRAM: 512 MiB
[ 485.383740] nouveau [ DRM] GART: 512 MiB
[ 485.383798] nouveau [ DRM] TMDS table version 2.0
[ 485.383853] nouveau [ DRM] DCB version 4.0
[ 485.383908] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 485.383963] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 485.384018] nouveau [ DRM] DCB outp 02: 02021362 00020010
[ 485.384071] nouveau [ DRM] DCB outp 03: 01032310 00000000
[ 485.384125] nouveau [ DRM] DCB conn 00: 00001030
[ 485.384216] nouveau [ DRM] DCB conn 01: 00002161
[ 485.384303] nouveau [ DRM] DCB conn 02: 00000200
[ 485.391544] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 485.391598] [drm] No driver support for vblank timestamp query.
[ 485.391763] nouveau [ DRM] 3 available performance level(s)
[ 485.391818] nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 485.391883] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 485.391948] nouveau [ DRM] 3: core 520MHz shader 1230MHz memory 395MHz voltage 1000mV
[ 485.392013] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV fanspeed 67%
[ 485.399873] nouveau [ DRM] MM: using COPY for buffer copies
[ 485.417789] nouveau 0000:01:00.0: No connectors reported connected with modes
[ 485.417954] [drm] Cannot find any crtc or sizes - going 1024x768
[ 485.420770] nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff8802356ce000
[ 485.421167] fbcon: nouveaufb (fb0) is primary device
[ 485.432468] Console: switching to colour frame buffer device 128x48
[ 485.433638] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 485.433653] nouveau 0000:01:00.0: registered panic notifier
[ 485.433693] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=c381c7e6-8a98-4962-a27c-1dd26dd2de3d ro vdso32=0
** Not tainted
** Kernel log:
[ 3.869521] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.869521] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.869521] (Note that use of the override may cause unknown side effects.)
[ 3.870873] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.870987] sp5100_tco: PCI Revision ID: 0x42
[ 3.871099] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 3.871165] sp5100_tco: Last reboot was not triggered by watchdog.
[ 3.871259] sp5100_tco: initialized (0xffffc90000c3cb00). heartbeat=60 sec (nowayout=0)
[ 3.872169] microcode: CPU0: patch_level=0x06000613
[ 3.913625] platform microcode: firmware: agent aborted loading amd-ucode/microcode_amd_fam15h.bin (not found?)
[ 3.913747] microcode: CPU1: patch_level=0x06000613
[ 3.913812] microcode: CPU2: patch_level=0x06000613
[ 3.913873] microcode: CPU3: patch_level=0x06000613
[ 3.913939] microcode: CPU4: patch_level=0x06000613
[ 3.914004] microcode: CPU5: patch_level=0x06000613
[ 3.914066] microcode: CPU6: patch_level=0x06000613
[ 3.914135] microcode: CPU7: patch_level=0x06000613
[ 3.914249] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.918408] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 3.918553] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 3.918703] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 3.918878] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 3.919012] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 3.919156] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 3.922808] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.924365] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 3.924541] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 3.925449] hda_intel: Disabling MSI
[ 3.925508] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.936558] kvm: Nested Virtualization enabled
[ 3.936617] kvm: Nested Paging enabled
[ 3.938917] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.949484] usb 8-3.2: new low-speed USB device number 3 using ohci_hcd
[ 4.061526] usb 8-3.2: New USB device found, idVendor=046d, idProduct=c50e
[ 4.061592] usb 8-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.061661] usb 8-3.2: Product: USB RECEIVER
[ 4.061717] usb 8-3.2: Manufacturer: Logitech
[ 4.086768] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.099629] usbcore: registered new interface driver usbhid
[ 4.099689] usbhid: USB HID core driver
[ 4.104917] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:16.0/usb8/8-3/8-3.2/8-3.2:1.0/input/input11
[ 4.105262] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:16.0-3.2/input0
[ 4.137480] usb 8-3.3: new low-speed USB device number 4 using ohci_hcd
[ 4.259438] usb 8-3.3: New USB device found, idVendor=04f2, idProduct=0402
[ 4.259502] usb 8-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.259571] usb 8-3.3: Product: USB Keyboard
[ 4.259627] usb 8-3.3: Manufacturer: Chicony
[ 4.272887] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb8/8-3/8-3.3/8-3.3:1.0/input/input12
[ 4.273149] hid-generic 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:16.0-3.3/input0
[ 4.301554] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb8/8-3/8-3.3/8-3.3:1.1/input/input13
[ 4.302064] hid-generic 0003:04F2:0402.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:16.0-3.3/input1
[ 4.732421] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 4.732745] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 4.732963] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 4.733173] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 5.161522] Adding 19528700k swap on /dev/sdb2. Priority:10 extents:1 across:19528700k
[ 12.243604] Adding 19535036k swap on /dev/sda2. Priority:1 extents:1 across:19535036k SSD
[ 12.293025] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.442667] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.621271] fuse init (API version 7.21)
[ 12.787541] it87: Found IT8720F chip at 0x228, revision 8
[ 12.787619] it87: Routing internal VCCH to in7
[ 12.787676] it87: Beeping is supported
[ 13.751708] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered,discard
[ 14.606115] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[ 14.726535] r8169 0000:03:00.0 eth0: link down
[ 14.726598] r8169 0000:03:00.0 eth0: link down
[ 14.726701] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.079803] r8169 0000:03:00.0 eth0: link up
[ 17.079963] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.567981] RPC: Registered named UNIX socket transport module.
[ 20.568053] RPC: Registered udp transport module.
[ 20.568108] RPC: Registered tcp transport module.
[ 20.568163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.574892] FS-Cache: Loaded
[ 20.575889] Key type dns_resolver registered
[ 20.585000] FS-Cache: Netfs 'nfs' registered for caching
[ 20.596042] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.066465] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 22.067306] NFSD: starting 90-second grace period (net ffffffff8167b880)
[ 22.164179] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.587584] kjournald starting. Commit interval 5 seconds
[ 22.590276] EXT3-fs (sdb3): using internal journal
[ 22.590337] EXT3-fs (sdb3): mounted filesystem with ordered data mode
[ 23.510826] Bluetooth: Core ver 2.16
[ 23.510900] NET: Registered protocol family 31
[ 23.510954] Bluetooth: HCI device and connection manager initialized
[ 23.511015] Bluetooth: HCI socket layer initialized
[ 23.511072] Bluetooth: L2CAP socket layer initialized
[ 23.511132] Bluetooth: SCO socket layer initialized
[ 23.516405] Bluetooth: RFCOMM TTY layer initialized
[ 23.516467] Bluetooth: RFCOMM socket layer initialized
[ 23.516519] Bluetooth: RFCOMM ver 1.11
[ 23.527910] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.527966] Bluetooth: BNEP filters: protocol multicast
[ 23.528023] Bluetooth: BNEP socket layer initialized
[ 23.882709] Ebtables v2.0 registered
[ 23.901222] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.918701] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 46.532134] virtuoso-t[5576]: segfault at ffffffffffffffff ip 00000000007ee1a6 sp 00007f6a151f0ce0 error 7 in virtuoso-t[400000+973000]
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-990XA-UD3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F9
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-990XA-UD3
board_version: x.x
** Loaded modules:
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
bnep
rfcomm
bluetooth
rfkill
ext3
jbd
binfmt_misc
nfsv3
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
it87
hwmon_vid
eeprom
i2c_nforce2
firewire_sbp2
psmouse
fuse
snd_hda_codec_hdmi
hid_generic
usbhid
hid
acpi_cpufreq
mperf
kvm_amd
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
snd_hda_codec_realtek
evdev
mxm_wmi
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_seq_midi
snd_seq_midi_event
snd_pcm
snd_rawmidi
microcode
sp5100_tco
serio_raw
pcspkr
fam15h_power
edac_mce_amd
k10temp
edac_core
i2c_piix4
snd_page_alloc
i2c_core
snd_seq
snd_seq_device
snd_timer
snd
soundcore
button
processor
wmi
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
r8169
mii
ehci_pci
libata
ohci_hcd
xhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
mapping eth0
script grep
map eth0
allow-hotplug eth0
auto eth0
iface eth0 inet dhcp
pre-up /sbin/ethtool -s eth0 autoneg off
iface tap0 inet static
address 192.168.2.205
netmask 255.255.255.0
broadcast 192.168.2.255
network 192.168.2.0
tunctl_user uml-net
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 50:e5:49:b5:ee:fa brd ff:ff:ff:ff:ff:ff
inet 192.168.0.211/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::52e5:49ff:feb5:eefa/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 1899456 3373 0 0 0 0 0 0 562783 3453 0 0 0 0 0 0
lo: 37322 451 0 0 0 0 0 0 37322 451 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3775 total packets received
0 forwarded
0 incoming packets discarded
3766 incoming packets delivered
3850 requests sent out
Icmp:
56 ICMP messages received
4 input ICMP message failed.
ICMP input histogram:
destination unreachable: 23
redirects: 29
echo requests: 2
echo replies: 2
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 7
echo request: 2
echo replies: 2
IcmpMsg:
InType0: 2
InType3: 23
InType5: 29
InType8: 2
OutType0: 2
OutType3: 7
OutType8: 2
Tcp:
269 active connections openings
35 passive connection openings
14 failed connection attempts
27 connection resets received
4 connections established
2944 segments received
2999 segments send out
56 segments retransmited
3 bad segments received.
195 resets sent
Udp:
727 packets received
1 packets to unknown port received.
0 packet receive errors
778 packets sent
UdpLite:
TcpExt:
150 TCP sockets finished time wait in fast timer
55 delayed acks sent
Quick ack mode was activated 1 times
13 packets directly queued to recvmsg prequeue.
1404 packet headers predicted
468 acknowledgments not containing data payload received
238 predicted acknowledgments
13 congestion windows recovered without slow start after partial ack
32 retransmits in slow start
22 other TCP timeouts
1 DSACKs sent for old packets
6 DSACKs received
22 connections reset due to unexpected data
26 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 2
TCPSackShiftFallback: 3
TCPRcvCoalesce: 100
TCPOFOQueue: 1
TCPChallengeACK: 3
TCPSYNChallenge: 3
IpExt:
InNoRoutes: 2
InMcastPkts: 52
OutMcastPkts: 27
InBcastPkts: 20
OutBcastPkts: 7
InOctets: 1889573
OutOctets: 544031
InMcastOctets: 7126
OutMcastOctets: 3797
InBcastOctets: 2019
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Region 3: Memory at <ignored> (64-bit, non-prefetchable) [size=512M]
Capabilities: <access denied>
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd500000-fd5fffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fdffb000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:a132]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: fda00000-fdafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdff9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fdff8000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:34cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at de000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at bf00 [size=128]
[virtual] Expansion ROM at d0000000 [disabled] [size=512K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:34cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fd9f8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdef8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fddf8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:0e.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-7VT600-1394 Motherboard [1458:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at af00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 008 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 011 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 008 Device 004: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate i200 Keyboard
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 004: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.9-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_IE@euro, LC_CTYPE=en_IE@euro (charmap=ISO-8859-15) (ignored: LC_ALL set to en_IE@euro)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
ii lilo 1:24.0-1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: