--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6-686: stat_via does not find SATA discs
- From: Jon Thackray <jgt@pobox.com>
- Date: Wed, 13 May 2009 23:23:02 +0100
- Message-id: <20090513222302.4446.62656.reportbug@burnside>
Package: linux-image-2.6-686
Version: 2.6.26+17+lenny1
Severity: normal
I am trying to use a VT6421 card to allow me to attach SATA and PATA
discs. I began with the oldstable (etch) release using kernel 2.6.18,
but found that this didn't support PATA (see attached dmesg and disc
file for this kernel to see that it does support SATA). I then
realised that PATA support wasn't merged into sata_via until 2.6.19,
and so upgraded to stable (lenny). I then found that although it could
now find a pair of PATA discs, it could no longer find a SATA disc
(even though the BIOS found it and reverting to 2.6.18 finds it). See
attached dmesg and disc files for details on this. See also meminfo
and cpuinfo for the 2.6.26 setup. Here also is the result of lspci -v
02:0c.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at dfa0 [size=16]
I/O ports at df90 [size=16]
I/O ports at df80 [size=16]
I/O ports at df60 [size=16]
I/O ports at df40 [size=32]
I/O ports at d400 [size=256]
Expansion ROM at fe600000 [disabled] [size=64K]
Capabilities: [e0] Power Management version 2
Kernel driver in use: sata_via
Kernel modules: sata_via
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6-686 depends on:
ii linux-image-2.6.26-2-686 2.6.26-15 Linux 2.6.26 image on PPro/Celeron
linux-image-2.6-686 recommends no packages.
linux-image-2.6-686 suggests no packages.
-- no debconf information
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-24etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue May 5 00:40:20 UTC 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262080
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32704 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000ff980
ACPI: RSDT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x3fff0000
ACPI: FADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x3fff1000
ACPI: MADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x3ffe3809
ACPI: DSDT (v001 D850MV MV85010A 0x00000005 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 2254.033 MHz processor.
Built 1 zonelists. Total pages: 262080
Kernel command line: root=/dev/hda1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031208k/1048320k available (1543k kernel code, 16460k reserved, 578k data, 196k init, 130816k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4512.01 BogoMIPS (lpj=9024036)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04
Total of 1 processors activated (4512.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4790k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:02:0d.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd500000-fe5fffff
PREFETCH window: f1200000-f52fffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fe600000-feafffff
PREFETCH window: f5300000-f53fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1242238004.952:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
libata version 2.00 loaded.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
hda: MAXTOR 6L080J4, ATA DISK drive
hdb: ST3250620A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IBM-DTLA-307075, ATA DISK drive
hdd: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:02:01.0: OHCI Host Controller
ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:02:01.0: irq 169, io mem 0xfeaf5000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 177
ohci_hcd 0000:02:01.1: OHCI Host Controller
ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:02:01.1: irq 177, io mem 0xfeaf6000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 185
e100: eth0: e100_probe: addr 0xfeaf3000, irq 185, MAC addr 00:02:B3:16:8C:4B
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
ahc_pci:2:11:0: Host Adapter Bios disabled. Using default SCSI device parameters
ohci_hcd 0000:02:01.0: wakeup
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
sata_via 0000:02:0c.0: version 2.0
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 201
sata_via 0000:02:0c.0: routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xDFA0 ctl 0xDFAA bmdma 0xDF40 irq 201
ata2: SATA max UDMA/133 cmd 0xDF90 ctl 0xDF9A bmdma 0xDF48 irq 201
scsi1 : sata_via
ata1: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0xDFA7
scsi2 : sata_via
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-6, max UDMA/133, 312581808 sectors: LBA48
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
Vendor: ATA Model: ST3160023AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
hda: max request size: 128KiB
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 <<5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: hda5 >
hdb: max request size: 512KiB
unknown partition table
sd 2:0:0:0: Attached scsi disk sda
hdb: 488397168 sectors (250059 MB) w/16384KiB Cache, CHS=30401/255/63, UDMA(100)
hdb: cache flushes supported
hdb: unknown partition table
hdc: max request size: 128KiB
hdc: 150136560 sectors (76869 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: cache flushes not supported
hdc: hdc1
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
input: PC Speaker as /class/input/input1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
Adding 2650684k swap on /dev/hda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
[drm] Initialized mga 3.2.1 20051102 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Initialized card for AGP DMA.
burnside:/home/jon/18# ls /dev/sd*
/dev/sda
burnside:/home/jon/18# fdisk /dev/sda
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xb5234d7c.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb5234d7c
Device Boot Start End Blocks Id System
Command (m for help): q
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262080
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262080
[ 0.000000] On node 0 totalpages: 262080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32448 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 D850MV MV85010A 20020517 MSFT 1011)
[ 0.000000] ACPI: FACP 3FFF1000, 0074 (r1 D850MV MV85010A 20020517 MSFT 1011)
[ 0.000000] ACPI: DSDT 3FFE0000, 3809 (r1 D850MV MV85010A 5 MSFT 100000B)
[ 0.000000] ACPI: FACS 3FFF8000, 0040
[ 0.000000] ACPI: APIC 3FFE3809, 005A (r1 D850MV MV85010A 20020517 MSFT 1011)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260032
[ 0.000000] Kernel command line: root=/dev/hda1 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2254.035 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1028280k/1048320k available (1769k kernel code, 19332k reserved, 752k data, 244k init, 130816k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4eb - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4eb (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084172] Calibrating delay using timer specific routine.. 4513.43 BogoMIPS (lpj=9026865)
[ 0.084314] Security Framework initialized
[ 0.084369] SELinux: Disabled at boot.
[ 0.084420] Capability LSM initialized
[ 0.084485] Mount-cache hash table entries: 512
[ 0.084760] Initializing cgroup subsys ns
[ 0.084812] Initializing cgroup subsys cpuacct
[ 0.084860] Initializing cgroup subsys devices
[ 0.084934] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.085018] CPU: L2 cache: 512K
[ 0.085066] CPU: Hyper-Threading is disabled
[ 0.085116] Intel machine check architecture supported.
[ 0.085169] Intel machine check reporting enabled on CPU#0.
[ 0.085219] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.085271] CPU0: Thermal monitoring enabled
[ 0.085338] Checking 'hlt' instruction... OK.
[ 0.100615] SMP alternatives: switching to UP code
[ 0.111511] Freeing SMP alternatives: 16k freed
[ 0.111567] ACPI: Core revision 20080321
[ 0.121728] ENABLING IO-APIC IRQs
[ 0.121961] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161714] CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04
[ 0.164010] Brought up 1 CPUs
[ 0.164010] Total of 1 processors activated (4513.43 BogoMIPS).
[ 0.164010] CPU0 attaching sched-domain:
[ 0.164010] domain 0: span 0
[ 0.164010] groups: 0
[ 0.164010] net_namespace: 660 bytes
[ 0.164010] Booting paravirtualized kernel on bare hardware
[ 0.164010] NET: Registered protocol family 16
[ 0.164010] ACPI: bus type pci registered
[ 0.164010] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
[ 0.164010] PCI: Using configuration type 1 for base access
[ 0.164010] Setting up standard PCI resources
[ 0.164532] ACPI: EC: Look up EC in DSDT
[ 0.171482] ACPI: Interpreter enabled
[ 0.171535] ACPI: (supports S0 S1 S4 S5)
[ 0.171729] ACPI: Using IOAPIC for interrupt routing
[ 0.179104] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.179383] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.179445] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.180011] PCI: Transparent bridge - 0000:00:1e.0
[ 0.180011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.188573] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.189188] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.189798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.190407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.191017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.191695] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.192313] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.192993] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.193612] ACPI: Power Resource [FDDP] (off)
[ 0.193697] ACPI: Power Resource [URP1] (off)
[ 0.193782] ACPI: Power Resource [URP2] (off)
[ 0.193866] ACPI: Power Resource [LPTP] (off)
[ 0.194017] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.194105] pnp: PnP ACPI init
[ 0.194163] ACPI: bus type pnp registered
[ 0.198642] pnp: PnP ACPI: found 13 devices
[ 0.198694] ACPI: ACPI bus type pnp unregistered
[ 0.198744] PnPBIOS: Disabled by ACPI PNP
[ 0.199132] PCI: Using ACPI for IRQ routing
[ 0.199432] ACPI: RTC can wake from S4
[ 0.199524] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.199576] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.199627] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.199686] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.199745] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.230320] PCI: Bridge: 0000:00:01.0
[ 0.230368] IO window: disabled.
[ 0.230416] MEM window: 0xfd500000-0xfe5fffff
[ 0.230465] PREFETCH window: 0x00000000f1200000-0x00000000f52fffff
[ 0.230521] PCI: Bridge: 0000:00:1e.0
[ 0.230568] IO window: d000-dfff
[ 0.230617] MEM window: 0xfe600000-0xfeafffff
[ 0.230667] PREFETCH window: 0x00000000f5300000-0x00000000f53fffff
[ 0.230733] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.230767] NET: Registered protocol family 2
[ 0.230936] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.231387] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.232584] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.233298] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.233355] TCP reno registered
[ 0.233594] NET: Registered protocol family 1
[ 0.233802] checking if image is initramfs... it is
[ 0.732035] Switched to high resolution mode on CPU 0
[ 1.008542] Freeing initrd memory: 7036k freed
[ 1.009371] audit: initializing netlink socket (disabled)
[ 1.009437] type=2000 audit(1242235025.008:1): initialized
[ 1.009680] highmem bounce pool size: 64 pages
[ 1.009733] Total HugeTLB memory allocated, 0
[ 1.009861] VFS: Disk quotas dquot_6.5.1
[ 1.009939] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.010033] msgmni has been set to 1767
[ 1.010228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.010289] io scheduler noop registered
[ 1.010335] io scheduler anticipatory registered
[ 1.010381] io scheduler deadline registered
[ 1.010438] io scheduler cfq registered (default)
[ 1.010509] pci 0000:01:00.0: Boot video device
[ 1.010542] pci 0000:02:0d.0: Firmware left e100 interrupts enabled; disabling
[ 1.011030] isapnp: Scanning for PnP cards...
[ 1.365312] isapnp: No Plug & Play device found
[ 1.368741] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.368943] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.369125] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.370400] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.370652] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.372955] brd: module loaded
[ 1.373132] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.376209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.376265] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.376517] mice: PS/2 mouse device common for all mice
[ 1.376732] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.376798] rtc0: alarms up to one month
[ 1.376891] cpuidle: using governor ladder
[ 1.376938] cpuidle: using governor menu
[ 1.376988] No iBFT detected.
[ 1.377581] TCP cubic registered
[ 1.377629] NET: Registered protocol family 17
[ 1.377681] Using IPI No-Shortcut mode
[ 1.377883] registered taskstats version 1
[ 1.378077] rtc_cmos 00:02: setting system clock to 2009-05-13 17:17:05 UTC (1242235025)
[ 1.378400] Freeing unused kernel memory: 244k freed
[ 1.398656] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.527735] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.322426] Uniform Multi-Platform E-IDE driver
[ 2.322484] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.326471] ICH2: IDE controller (0x8086:0x244b rev 0x04) at PCI slot 0000:00:1f.1
[ 2.326551] ICH2: not 100% native mode: will probe irqs later
[ 2.326612] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.326667] ide1: BM-DMA at 0xffa8-0xffaf
[ 2.326717] Probing IDE interface ide0...
[ 2.376632] usbcore: registered new interface driver usbfs
[ 2.376725] usbcore: registered new interface driver hub
[ 2.376812] usbcore: registered new device driver usb
[ 2.378476] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.409142] SCSI subsystem initialized
[ 2.421238] No dock devices found.
[ 2.447288] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.447345] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.451012] libata version 3.00 loaded.
[ 2.544052] Floppy drive(s): fd0 is 1.44M
[ 2.563847] FDC 0 is a post-1991 82077
[ 2.612200] hda: MAXTOR 6L080J4, ATA DISK drive
[ 2.892157] hdb: ST3250620A, ATA DISK drive
[ 2.948070] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.948213] hda: UDMA/100 mode selected
[ 2.948430] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.948586] hdb: UDMA/100 mode selected
[ 2.948847] Probing IDE interface ide1...
[ 3.236155] hdc: IBM-DTLA-307075, ATA DISK drive
[ 4.020159] hdd: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
[ 4.076057] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.076232] hdc: UDMA/100 mode selected
[ 4.076462] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.076521] hdd: MWDMA2 mode selected
[ 4.076665] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.080666] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.092003] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 4.092003] ohci_hcd 0000:02:01.0: OHCI Host Controller
[ 4.092003] ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 1
[ 4.092003] ohci_hcd 0000:02:01.0: irq 19, io mem 0xfeaf5000
[ 4.152125] usb usb1: configuration #1 chosen from 1 choice
[ 4.152216] hub 1-0:1.0: USB hub found
[ 4.152272] hub 1-0:1.0: 2 ports detected
[ 4.256147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.256200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.256259] usb usb1: Product: OHCI Host Controller
[ 4.256306] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 4.256355] usb usb1: SerialNumber: 0000:02:01.0
[ 4.256478] ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 4.256585] ohci_hcd 0000:02:01.1: OHCI Host Controller
[ 4.256663] ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 2
[ 4.256742] ohci_hcd 0000:02:01.1: irq 18, io mem 0xfeaf6000
[ 4.312124] usb usb2: configuration #1 chosen from 1 choice
[ 4.312217] hub 2-0:1.0: USB hub found
[ 4.312274] hub 2-0:1.0: 2 ports detected
[ 4.416127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.416180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.416240] usb usb2: Product: OHCI Host Controller
[ 4.416287] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 4.416336] usb usb2: SerialNumber: 0000:02:01.1
[ 4.416465] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 4.417688] ahc_pci:2:11:0: Host Adapter Bios disabled. Using default SCSI device parameters
[ 19.420019] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 19.420022] <Adaptec 2902/04/10/15/20C/30C SCSI adapter>
[ 19.420024] aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
[ 19.420025]
[ 19.420410] sata_via 0000:02:0c.0: version 2.3
[ 19.420436] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.420587] sata_via 0000:02:0c.0: routed to hard irq line 10
[ 19.420714] scsi1 : sata_via
[ 19.420832] scsi2 : sata_via
[ 19.420937] scsi3 : sata_via
[ 19.421017] ata1: SATA max UDMA/133 port i16@0xdfa0 bmdma 0xdf40 irq 17
[ 19.421068] ata2: SATA max UDMA/133 port i16@0xdf90 bmdma 0xdf48 irq 17
[ 19.421118] ata3: PATA max UDMA/133 port i16@0xdf80 bmdma 0xdf50 irq 17
[ 19.750891] ata1: SATA link down (SStatus 0 SControl 310)
[ 25.108010] ata2: link is slow to respond, please be patient (ready=0)
[ 29.756009] ata2: COMRESET failed (errno=-16)
[ 35.116008] ata2: link is slow to respond, please be patient (ready=0)
[ 39.764008] ata2: COMRESET failed (errno=-16)
[ 45.124008] ata2: link is slow to respond, please be patient (ready=0)
[ 74.804009] ata2: COMRESET failed (errno=-16)
[ 79.828009] ata2: COMRESET failed (errno=-16)
[ 79.828057] ata2: reset failed, giving up
[ 80.025513] ata3.00: ATA-6: WDC WD2500JB-00EVA0, 15.05R15, max UDMA/100
[ 80.025565] ata3.00: 488397168 sectors, multi 0: LBA48
[ 80.029660] ata3.01: ATA-5: IBM-DTLA-307015, TX2OA50C, max UDMA/100
[ 80.029660] ata3.01: 30003120 sectors, multi 0: LBA
[ 80.045392] ata3.00: configured for UDMA/100
[ 80.087607] ata3.01: configured for UDMA/100
[ 80.087766] scsi 3:0:0:0: Direct-Access ATA WDC WD2500JB-00E 15.0 PQ: 0 ANSI: 5
[ 80.088023] scsi 3:0:1:0: Direct-Access ATA IBM-DTLA-307015 TX2O PQ: 0 ANSI: 5
[ 80.088741] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 80.112755] e100: eth0: e100_probe: addr 0xfeaf3000, irq 21, MAC addr 00:02:b3:16:8c:4b
[ 80.184158] Driver 'sd' needs updating - please use bus_type methods
[ 80.184340] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 80.184413] sd 3:0:0:0: [sda] Write Protect is off
[ 80.184462] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.184499] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.184636] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 80.184705] sd 3:0:0:0: [sda] Write Protect is off
[ 80.184754] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.184790] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.184854] sda: sda1 sda2 sda3 sda4 <<6>hda: max request size: 128KiB
[ 80.210567] sda5<6>hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63
[ 80.214450] hda: cache flushes supported
[ 80.214553] hda: hda1 hda2 < sda6 sda7 >
[ 80.243994] hda5 >
[ 80.244516] hdb: max request size: 512KiB
[ 80.261336] sd 3:0:0:0: [sda] Attached SCSI disk
[ 80.261492] sd 3:0:1:0: [sdb] 30003120 512-byte hardware sectors (15362 MB)
[ 80.261564] sd 3:0:1:0: [sdb] Write Protect is off
[ 80.261614] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 80.261651] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.261779] sd 3:0:1:0: [sdb] 30003120 512-byte hardware sectors (15362 MB)
[ 80.261848] sd 3:0:1:0: [sdb] Write Protect is off
[ 80.261898] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 80.261934] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.261996] sdb:<6>hdb: 488397168 sectors (250059 MB) w/16384KiB Cache, CHS=30401/255/63
[ 80.277028] sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 80.300728] hdb: cache flushes supported
[ 80.300840] hdb:<5>sd 3:0:1:0: [sdb] Attached SCSI disk
[ 80.324500] unknown partition table
[ 80.324739] hdc: max request size: 128KiB
[ 80.342849] hdc: 150136560 sectors (76869 MB) w/1916KiB Cache, CHS=65535/16/63
[ 80.342982] hdc: cache flushes not supported
[ 80.343086] hdc: hdc1
[ 80.369052] hdd: ATAPI 52X CD-ROM drive, 128kB Cache
[ 80.369240] Uniform CD-ROM driver Revision: 3.20
[ 81.063469] PM: Starting manual resume from disk
[ 81.126211] kjournald starting. Commit interval 5 seconds
[ 81.126211] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.162646] udevd version 125 started
[ 84.639704] Linux agpgart interface v0.103
[ 84.675178] agpgart: Detected an Intel i850 Chipset.
[ 84.678240] agpgart: AGP aperture is 64M @ 0xf8000000
[ 84.749044] intel_rng: Firmware space is locked read-only. If you can't or
[ 84.749048] intel_rng: don't want to disable this in firmware setup, and if
[ 84.749050] intel_rng: you are certain that your system has a functional
[ 84.749052] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 84.768812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 84.778386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 84.816166] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 84.816292] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 84.816359] iTCO_wdt: No card detected
[ 84.915724] input: Power Button (FF) as /class/input/input1
[ 84.927810] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 84.937157] ACPI: Power Button (FF) [PWRF]
[ 84.937299] input: Power Button (CM) as /class/input/input2
[ 84.968086] ACPI: Power Button (CM) [PBTN]
[ 85.947691] input: PC Speaker as /class/input/input3
[ 86.365185] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 86.399059] parport_pc 00:0a: reported by Plug and Play ACPI
[ 86.399164] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 87.597172] Adding 2650684k swap on /dev/hda5. Priority:-1 extents:1 across:2650684k
[ 88.071037] EXT3 FS on hda1, internal journal
[ 88.321338] loop: module loaded
[ 88.415242] device-mapper: uevent: version 1.0.3
[ 88.415358] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 88.768416] kjournald starting. Commit interval 5 seconds
[ 88.768743] EXT3 FS on hdb, internal journal
[ 88.768827] EXT3-fs: mounted filesystem with ordered data mode.
[ 88.773770] kjournald starting. Commit interval 5 seconds
[ 88.774024] EXT3 FS on hdc1, internal journal
[ 88.774107] EXT3-fs: mounted filesystem with ordered data mode.
[ 90.916235] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 91.967980] NET: Registered protocol family 10
[ 91.968604] lo: Disabled Privacy Extensions
[ 93.852822] lp0: using parport0 (interrupt-driven).
[ 93.873838] ppdev: user-space parallel port driver
[ 95.902647] RPC: Registered udp transport module.
[ 95.902704] RPC: Registered tcp transport module.
[ 95.990398] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 96.063544] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 96.076015] NFSD: starting 90-second grace period
[ 102.860008] eth0: no IPv6 routers present
[ 104.089662] [drm] Initialized drm 1.1.0 20060810
[ 104.097289] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 104.097526] [drm] Initialized mga 3.2.1 20051102 on minor 0
[ 104.098442] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 104.098466] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 104.098484] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 104.113558] [drm] Initialized card for AGP DMA.
burnside:/home/jon/26# ls /dev/sd*
/dev/sda /dev/sda3 /dev/sda6 /dev/sdb1 /dev/sdb4
/dev/sda1 /dev/sda4 /dev/sda7 /dev/sdb2 /dev/sdb5
/dev/sda2 /dev/sda5 /dev/sdb /dev/sdb3 /dev/sdb6
burnside:/home/jon/26# fdisk /dev/sda
The number of cylinders for this disk is set to 30401.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 1 6 48163+ 83 Linux
/dev/sda2 7 67 489982+ 83 Linux
/dev/sda3 68 249 1461915 82 Linux swap / Solaris
/dev/sda4 250 30401 242195940 5 Extended
/dev/sda5 250 857 4883728+ 83 Linux
/dev/sda6 858 1100 1951866 83 Linux
/dev/sda7 1101 30401 235360251 83 Linux
Command (m for help): q
burnside:/home/jon/26# fdisk /dev/sdb
The number of cylinders for this disk is set to 1867.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sdb: 15.3 GB, 15361597440 bytes
255 heads, 63 sectors/track, 1867 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 7 56196 83 Linux
/dev/sdb2 8 71 514080 83 Linux
/dev/sdb3 72 326 2048287+ 82 Linux swap / Solaris
/dev/sdb4 327 1867 12378082+ 5 Extended
/dev/sdb5 327 964 5124703+ 83 Linux
/dev/sdb6 965 1866 7245283+ 83 Linux
Command (m for help): q
MemTotal: 1035900 kB
MemFree: 66852 kB
Buffers: 708344 kB
Cached: 139160 kB
SwapCached: 0 kB
Active: 130180 kB
Inactive: 790236 kB
HighTotal: 130816 kB
HighFree: 252 kB
LowTotal: 905084 kB
LowFree: 66600 kB
SwapTotal: 2650684 kB
SwapFree: 2650684 kB
Dirty: 68 kB
Writeback: 0 kB
AnonPages: 72924 kB
Mapped: 36840 kB
Slab: 25752 kB
SReclaimable: 20584 kB
SUnreclaim: 5168 kB
PageTables: 1564 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3168632 kB
Committed_AS: 194288 kB
VmallocTotal: 114680 kB
VmallocUsed: 13496 kB
VmallocChunk: 100340 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 4096 kB
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.26GHz
stepping : 4
cpu MHz : 2254.035
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
bogomips : 4513.41
clflush size : 64
power management:
--- End Message ---