Bug#703798: linux-image-3.2.0-4-amd64: enables audio on DVI–HDMI output, disabling analog audio input on TV
Package: src:linux
Version: 3.2.39-2
Severity: important
Dear Maintainer,
Upgrading from linux-image-3.2.0-4-amd64 3.2.35-2 to linux-image-3.2.0-4-amd64 3.2.39-1 disables the analog audio input on my LG 42LH70YR television connected via a DVI-to-HDMI adapter to the DVI connector on my MSI NX8600GT-T2D512EZ. The problem persists on linux-image-3.2.0-4-amd64 3.2.39-2.
I suspect this might be due to it enabling digital audio output on the connection, which in turn makes the TV disable its analog input to use the audio signal received via HDMI instead.
I don’t have the S/PDIF output connected to the VGA card (and I don’t think S/PDIF–HDMI audio routing would work in any case?), so this leaves me without audio on my TV.
Audio transport should be disabled in this case to allow the use of the alternative analog audio input for DVI/HDMI provided by displays which select the audio input source automatically.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
** Command line:
BOOT_IMAGE=/debian-wheezy-b2/boot/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/btrfs-root_crypt ro rootflags=subvol=debian-wheezy-b2
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 21.670382] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 21.670444] ACPI: Power Button [PWRB]
[ 21.670557] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 21.670608] ACPI: Power Button [PWRF]
[ 21.960674] coretemp coretemp.0: Using relative temperature scale!
[ 21.960741] coretemp coretemp.0: Using relative temperature scale!
[ 21.960806] coretemp coretemp.0: Using relative temperature scale!
[ 21.960866] coretemp coretemp.0: Using relative temperature scale!
[ 22.054709] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 22.408745] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 22.408802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.408901] i2c i2c-0: nForce2 SMBus adapter at 0x1c80
[ 22.568045] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 22.568184] NV_TCO: Watchdog reboot detected.
[ 22.568304] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 23.173166] [drm] Initialized drm 1.1.0 20060810
[ 23.672879] wmi: Mapper loaded
[ 24.078298] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 24.078680] nouveau 0000:01:00.0: setting latency timer to 64
[ 24.078698] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[ 24.082274] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 24.111188] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 24.111251] hda_intel: Disabling MSI
[ 24.111329] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[ 24.121946] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 24.121988] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 24.122031] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 24.122072] [drm] nouveau 0000:01:00.0: Bios version 60.84.51.00
[ 24.122115] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 24.122231] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 24.122273] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 24.122315] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028
[ 24.122358] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[ 24.122400] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[ 24.122442] [drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00020030
[ 24.122484] [drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c0c080
[ 24.122526] [drm] nouveau 0000:01:00.0: DCB conn 00: 2030
[ 24.122595] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130
[ 24.122664] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[ 24.122733] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[ 24.122802] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[ 24.122872] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC1BE
[ 24.145922] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC50B
[ 24.162670] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCF58
[ 24.162725] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD04A
[ 24.163835] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD27D
[ 24.163885] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD2E2
[ 24.183780] [drm] nouveau 0000:01:00.0: 0xD2E2: Condition still not met after 20ms, skipping following opcodes
[ 24.185600] [TTM] Zone kernel: Available graphics memory: 2030128 kiB
[ 24.185654] [TTM] Initializing pool allocator
[ 24.185702] [TTM] Initializing DMA pool allocator
[ 24.185757] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (GDDR3)
[ 24.188773] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 24.198383] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 24.198431] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 24.199088] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 24.199134] [drm] No driver support for vblank timestamp query.
[ 24.204185] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 24.204239] [drm] nouveau 0000:01:00.0: 0: core 540MHz shader 1296MHz memory 700MHz fanspeed 100%
[ 24.204297] [drm] nouveau 0000:01:00.0: c: core 540MHz shader 1296MHz memory 702MHz voltage 1320mV
[ 24.246525] usbcore: registered new interface driver snd-usb-audio
[ 24.335116] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x320000, bo ffff880117bbe400
[ 24.335258] fbcon: nouveaufb (fb0) is primary device
[ 24.374133] Console: switching to colour frame buffer device 160x64
[ 24.375353] fb0: nouveaufb frame buffer device
[ 24.375360] drm: registered panic notifier
[ 24.375371] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 25.882677] device fsid 0a8e0046-9abd-4831-8bb8-aa91f8a70756 devid 1 transid 3710 /dev/sdb4
[ 26.681611] btrfs: disk space caching is enabled
[ 26.909315] btrfs: use lzo compression
[ 26.909325] btrfs: disk space caching is enabled
[ 28.130251] loop: module loaded
[ 28.580464] Adding 8388604k swap on /dev/mapper/swap_crypt. Priority:-1 extents:1 across:8388604k
[ 28.755817] device fsid 7e4503df-0d68-4e42-81a1-267c2dc9abe5 devid 1 transid 372117 /dev/mapper/btrfs-root_crypt
[ 28.755968] device fsid 7e4503df-0d68-4e42-81a1-267c2dc9abe5 devid 1 transid 372117 /dev/mapper/btrfs-root_crypt
[ 28.756162] device fsid 7e4503df-0d68-4e42-81a1-267c2dc9abe5 devid 1 transid 372117 /dev/mapper/btrfs-root_crypt
[ 28.832266] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 31.970718] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.203762] vboxdrv: Found 4 processor cores.
[ 32.204046] vboxdrv: fAsync=0 offMin=0x414 offMax=0x5de7
[ 32.204526] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 32.204898] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[ 32.840130] vboxpci: IOMMU not found (not registered)
[ 33.586677] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 35.157089] lp: driver loaded but no devices found
[ 35.363058] ppdev: user-space parallel port driver
[ 35.421750] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 40.336006] eth0: no IPv6 routers present
[ 41.630725] Bluetooth: Core ver 2.16
[ 41.631368] NET: Registered protocol family 31
[ 41.631850] Bluetooth: HCI device and connection manager initialized
[ 41.632337] Bluetooth: HCI socket layer initialized
[ 41.632842] Bluetooth: L2CAP socket layer initialized
[ 41.633322] Bluetooth: SCO socket layer initialized
[ 41.692682] Bluetooth: RFCOMM TTY layer initialized
[ 41.693202] Bluetooth: RFCOMM socket layer initialized
[ 41.693663] Bluetooth: RFCOMM ver 1.11
[ 41.738717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.739218] Bluetooth: BNEP filters: protocol multicast
[ 165.095696] fuse init (API version 7.17)
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS P5N-E SLI ACPI BIOS Revision 1406
board_vendor: ASUSTeK Computer INC.
board_name: P5N-E SLI
board_version: 1.XX
** Loaded modules:
fuse
bnep
rfcomm
bluetooth
rfkill
crc16
cpufreq_userspace
ip6t_REJECT
cpufreq_stats
nf_conntrack_ipv6
nf_defrag_ipv6
cpufreq_powersave
parport_pc
cpufreq_conservative
ip6table_filter
ip6_tables
ppdev
lp
iptable_nat
nf_nat
parport
xt_limit
ipt_REJECT
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
xt_tcpudp
xt_addrtype
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
iptable_filter
ip_tables
x_tables
nls_utf8
nls_cp437
vfat
fat
loop
snd_hda_codec_realtek
snd_usb_audio
snd_usbmidi_lib
snd_hda_intel
nouveau
snd_hda_codec
snd_hwdep
snd_pcm_oss
mxm_wmi
wmi
video
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
ttm
drm_kms_helper
drm
snd_rawmidi
power_supply
snd_seq
i2c_algo_bit
nv_tco
i2c_nforce2
acpi_cpufreq
snd_seq_device
snd_timer
evdev
mperf
pcspkr
coretemp
i2c_core
asus_atk0110
snd
button
soundcore
processor
btrfs
crc32c
libcrc32c
zlib_deflate
cryptd
aes_x86_64
aes_generic
xts
gf128mul
dm_crypt
dm_mod
microcode
sg
usbhid
hid
sd_mod
crc_t10dif
ahci
ohci_hcd
libahci
pata_amd
ata_generic
forcedeth
sata_nv
ehci_hcd
libata
scsi_mod
usbcore
fan
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: NVIDIA Corporation C55 Host Bridge [10de:03a3] (rev a2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03ac] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03aa] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03a9] (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03ab] (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03a8] (rev a2)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.6 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b5] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b4] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03ad] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03ae] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.2 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03af] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b0] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.4 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b1] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.5 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b2] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.6 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b3] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03b6] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.1 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03bc] (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.2 RAM memory [0500]: NVIDIA Corporation C55 Memory Controller [10de:03ba] (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.0 PCI bridge [0604]: NVIDIA Corporation C55 PCI Express bridge [10de:03b7] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: NVIDIA Corporation C55 PCI Express bridge [10de:03bb] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: NVIDIA Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c80 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0a.2 RAM memory [0500]: NVIDIA Corporation MCP51 Memory Controller 0 [10de:0272] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:81bc]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:0b.0 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:0f.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=128
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: NVIDIA Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8221]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. NX8600GT-T2D256EZ [1462:0910]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB360 AHCI Controller [197b:2360] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8208]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8c00 [size=16]
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 08bb:2706 Texas Instruments Japan
Bus 002 Device 003: ID 045e:008a Microsoft Corp. Wireless Keyboard and Mouse
-- System Information:
Debian Release: 7.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: