Bug#699157: linux-image-3.2.0-4-amd64: mount -o remount, ro on bind mount causes source filesystem to become read-only
Package: src:linux
Version: 3.2.35-2
Severity: normal
Dear Maintainer,
I'm experiencing what seems to be a kernel bug with read-only remounting
of a bind mount (creating a read-only bind mount). After running the
following commands, both /foo/dir_ro *and* /foo/dir become read-only:
mount --bind /foo/dir /foo/dir_ro
mount -o remount,ro /foo/dir_ro
Running 'mount -o remount,rw /foo/dir' rectifies the situation, leaving
it as I intended (/foo/dir writable, /foo/dir_ro read-only).
Thanks,
Zev Weiss
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg--ssd-sysroot ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.010929] Console: switching to colour frame buffer device 240x75
[ 3.013438] fb0: nouveaufb frame buffer device
[ 3.013440] drm: registered panic notifier
[ 3.013445] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 3.799556] md: md0 stopped.
[ 3.800607] md: bind<sdb>
[ 3.800731] md: bind<sde>
[ 3.807141] md: raid1 personality registered for level 1
[ 3.807458] bio: create slab <bio-1> at 1
[ 3.807521] md/raid1:md0: active with 2 out of 2 mirrors
[ 3.807541] md0: detected capacity change from 0 to 2000264560640
[ 3.835885] md0: unknown partition table
[ 3.962862] md: md1 stopped.
[ 3.965536] md: bind<sdd>
[ 3.965706] md: bind<sda>
[ 3.967957] md/raid1:md1: active with 2 out of 2 mirrors
[ 3.967976] md1: detected capacity change from 0 to 500106674176
[ 4.024324] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.031249] md1: unknown partition table
[ 4.251852] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 4.295424] loop: module loaded
[ 4.959331] Adding 4194300k swap on /dev/mapper/vg--ssd-swap. Priority:-1 extents:1 across:4194300k SS
[ 6.045526] kjournald starting. Commit interval 5 seconds
[ 6.045628] EXT3-fs (sdc1): using internal journal
[ 6.045632] EXT3-fs (sdc1): mounted filesystem with ordered data mode
[ 6.047893] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.050170] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.122924] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.236900] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.293508] kjournald starting. Commit interval 5 seconds
[ 6.293634] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 6.331067] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 6.780483] r8169 0000:04:00.0: eth0: link down
[ 6.780490] r8169 0000:04:00.0: eth0: link down
[ 6.781506] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.163430] r8169 0000:04:00.0: eth0: link up
[ 9.164417] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.737732] RPC: Registered named UNIX socket transport module.
[ 16.737736] RPC: Registered udp transport module.
[ 16.737738] RPC: Registered tcp transport module.
[ 16.737740] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.749189] FS-Cache: Loaded
[ 16.759249] FS-Cache: Netfs 'nfs' registered for caching
[ 16.768939] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.790334] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.822734] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.925057] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.898599] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 18.898908] NFSD: starting 90-second grace period
[ 20.112007] eth0: no IPv6 routers present
[ 242.431813] Kprobes globally unoptimized
[ 242.468323] stap_7a30e3695e76472eb616ead2970b485_4039: systemtap: 1.7/0.152, base: ffffffffa057e000, memory: 14data/16text/1ctx/2058net/18alloc kb, probes: 1
[ 255.614619] stap_df243a220556068fca70eedb018891c_4194: systemtap: 1.7/0.152, base: ffffffffa0587000, memory: 14data/16text/1ctx/2058net/18alloc kb, probes: 1
[ 337.753052] stap_7dc557923d2612917434539e96d25458_4407: systemtap: 1.7/0.152, base: ffffffffa0590000, memory: 18data/16text/1ctx/2058net/18alloc kb, probes: 1
[ 5682.988021] usb 1-1.1: USB disconnect, device number 3
[ 5687.028095] usb 1-1.1: new low-speed USB device number 5 using ehci_hcd
[ 5687.124839] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016
[ 5687.124843] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5687.124846] usb 1-1.1: Product: Optical USB Mouse
[ 5687.124849] usb 1-1.1: Manufacturer: Logitech
[ 5687.127314] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
[ 5687.127474] generic-usb 0003:046D:C016.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.7-1.1/input0
[ 5715.476089] usb 1-1: USB disconnect, device number 2
[ 5715.476092] usb 1-1.1: USB disconnect, device number 5
[ 5715.504273] usb 1-1.2: USB disconnect, device number 4
[ 5722.360025] usb 1-1: new high-speed USB device number 6 using ehci_hcd
[ 5722.500589] usb 1-1: New USB device found, idVendor=05ac, idProduct=1006
[ 5722.500593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5722.500596] usb 1-1: Product: Keyboard Hub
[ 5722.500598] usb 1-1: Manufacturer: Apple, Inc.
[ 5722.500600] usb 1-1: SerialNumber: 000000000000
[ 5722.501062] hub 1-1:1.0: USB hub found
[ 5722.501212] hub 1-1:1.0: 3 ports detected
[ 5722.772099] usb 1-1.1: new low-speed USB device number 7 using ehci_hcd
[ 5722.868722] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016
[ 5722.868726] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5722.868729] usb 1-1.1: Product: Optical USB Mouse
[ 5722.868731] usb 1-1.1: Manufacturer: Logitech
[ 5722.871080] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input7
[ 5722.871214] generic-usb 0003:046D:C016.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.7-1.1/input0
[ 5722.940105] usb 1-1.2: new low-speed USB device number 8 using ehci_hcd
[ 5723.038597] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=0220
[ 5723.038601] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5723.038604] usb 1-1.2: Product: Apple Keyboard
[ 5723.038606] usb 1-1.2: Manufacturer: Apple, Inc
[ 5723.042403] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[ 5723.042572] apple 0003:05AC:0220.0006: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-1.2/input0
[ 5723.045412] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.1/input/input9
[ 5723.045546] apple 0003:05AC:0220.0007: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-1.2/input1
[13112.430445] fuse init (API version 7.17)
[15272.292052] EXT4-fs (dm-6): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[15336.714473] EXT4-fs (dm-6): re-mounted. Opts: (null)
[17915.629783] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[17915.845612] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[17999.890399] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[18014.494823] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[35222.291844] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[35222.473823] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[36017.085217] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[36020.371216] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: P35-DS3R
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F4
board_vendor: Gigabyte Technology Co., Ltd.
board_name: P35-DS3R
board_version: x.x
** Loaded modules:
fuse
ip6table_filter
ip6_tables
iptable_nat
nf_nat
iptable_mangle
ipt_REJECT
xt_comment
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
binfmt_misc
iptable_filter
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
loop
raid1
kvm_intel
kvm
md_mod
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
coretemp
snd_timer
pcspkr
nouveau
serio_raw
iTCO_wdt
i2c_i801
iTCO_vendor_support
snd
mxm_wmi
wmi
evdev
video
parport_pc
parport
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
soundcore
acpi_cpufreq
mperf
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
sr_mod
hid_apple
sg
cdrom
sd_mod
crc_t10dif
usbhid
hid
ata_generic
pata_jmicron
ata_piix
ahci
libahci
r8169
mii
uhci_hcd
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fa700000-fa8fffff
Prefetchable memory behind bridge: 00000000fa900000-00000000faafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa000000-fa0fffff
Prefetchable memory behind bridge: 00000000fa500000-00000000fa6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000fa200000-00000000fa4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00009000-00009fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d600 [size=8]
Region 1: I/O ports at d700 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d900 [size=4]
Region 4: I/O ports at da00 [size=16]
Region 5: I/O ports at db00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa106000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at dd00 [size=8]
Region 1: I/O ports at de00 [size=4]
Region 2: I/O ports at df00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e100 [size=16]
Region 5: I/O ports at e200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:3445]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b200 [size=8]
Region 3: I/O ports at b300 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fa200000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 001 Device 007: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 008: ID 05ac:0220 Apple, Inc. Aluminum Keyboard (ANSI)
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: