Bug#697019: linux-image-3.2.0-4-amd64: USB 3.0 ext HDD drive doesnt work and hangs usb 3.0 hub
On 01/20/2013 08:09 PM, Ben Hutchings wrote:
Control: tag -1 moreinfo
Could you test whether Linux 3.7 (currently available in experimental
<http://wiki.debian.org/DebianExperimental>) still has this problem?
Ben.
There is no problem with my USB 3.0 hdd in kernel "3.7-trunk-amd64" (see
attach "SUCCESS*.txt")
I've installed linux-image-3.7-trunc-amd64,
linux-headers-3.7-trunc-amd64 and all dependencies.
USB 3.0 hdd drive worked properly.
(it is offtopic, but wifi, bluethooth and virtualbox didn't work with
experimental kernel).
Also, Iv'e checked if virtual box modules interfere with USB 3.0 problem
in question.
No, it doesn't interfere. I've removed virtualbox completely and obtain
that same result (see FAIL*.txt), i.e. usb 3.0 hdd dont work, two usb
3.0 became unusable.
=Nick
# uname -a
Linux lenovo 3.7-trunk-amd64 #1 SMP Debian 3.7.3-1~experimental.1 x86_64 GNU/Linux
# dmesg
[ 134.208530] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 139.409829] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 139.613722] usb 4-4: device not accepting address 2, error -62
[ 139.725814] hub 4-0:1.0: unable to enumerate USB device on port 4
[ 140.214959] usb 4-4: new SuperSpeed USB device number 4 using xhci_hcd
[ 140.231740] usb 4-4: New USB device found, idVendor=0bc2, idProduct=2332
[ 140.231751] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 140.231758] usb 4-4: Product: Portable
[ 140.231763] usb 4-4: Manufacturer: Seagate
[ 140.231768] usb 4-4: SerialNumber: 2GH76WY5
[ 140.232587] scsi8 : usb-storage 4-4:1.0
[ 141.229648] scsi 8:0:0:0: Direct-Access Seagate Portable SF04 PQ: 0 ANSI: 4
[ 141.231976] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 141.233667] sd 8:0:0:0: [sdc] 976773164 512-byte logical blocks: (500 GB/465 GiB)
[ 141.233951] sd 8:0:0:0: [sdc] Write Protect is off
[ 141.233959] sd 8:0:0:0: [sdc] Mode Sense: 1c 00 00 00
[ 141.234221] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 141.261936] sdc: sdc1
[ 141.263230] sd 8:0:0:0: [sdc] Attached SCSI disk
# lsusb
lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 004: ID 0bc2:2332 Seagate RSS LLC
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 5986:0299 Acer, Inc
# uname -a
Linux lenovo 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linu
# dmesg
[ 225.077608] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 225.281478] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 225.281482] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 225.485398] usb 4-2: device not accepting address 2, error -12
[ 225.485410] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 225.485412] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 225.485417] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 225.485419] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 225.485422] hub 4-0:1.0: couldn't allocate port 2 usb_device
Reply to: