[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#698225: marked as done (linux-image-2.6.32-5-686-bigmem: split-brain when running "drbdadm primary $DEV" with dual primary setup in Sec/Sec state)



Your message dated Tue, 15 Jan 2013 20:19:08 +0000
with message-id <20130115201908.GJ13292@decadent.org.uk>
and subject line Re: Bug#698225: linux-image-2.6.32-5-686-bigmem: split-brain when running "drbdadm primary $DEV" with dual primary setup in Sec/Sec state
has caused the Debian Bug report #698225,
regarding linux-image-2.6.32-5-686-bigmem: split-brain when running "drbdadm primary $DEV" with dual primary setup in Sec/Sec state
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
698225: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=698225
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-46
Severity: normal

While in this state:

 0: cs:Connected ro:Secondary/Secondary ds:UpToDate/UpToDate C r----
    ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:0

Issue

	drbdadm primary $DEV

On both nodes at the same time (either via cluster resource manager, or mssh) will lead to a split brain:

[ 5067.503912] block drbd0: Split-Brain detected, dropping connection!

 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown   r----
    ns:0 nr:0 dw:0 dr:420 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:0

I can reproduce this with a 64 bit kernel, and with kernel/drbd8-utils from backports (also 32/64 bit).

-- System Information:
Debian Release: 6.0.6
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages drbd8-utils depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  libc6                         2.11.3-4   Embedded GNU C Library: Shared lib

drbd8-utils recommends no packages.

Versions of packages drbd8-utils suggests:
pn  heartbeat                     <none>     (no description available)

-- Configuration Files:
/etc/drbd.d/debian7.res
resource debian7 {
  net {
    sndbuf-size 0;
    max-buffers 8000;
    max-epoch-size 8000;
    allow-two-primaries;

    after-sb-0pri discard-zero-changes;
    after-sb-1pri consensus;
    after-sb-2pri disconnect;
  }
  syncer {
    rate 40M;
  }

  device    /dev/drbd0;
  disk      /dev/sys/debian7;
  meta-disk internal;

  on debian8 {
    address   192.168.0.8:7791;
  }
  on debian9 {
    address   192.168.0.9:7791;
  }
}

/etc/drbd.d/global_common.conf changed:
global {
	usage-count no;
	# minor-count dialog-refresh disable-ip-verification
}
common {
	protocol C;
	handlers {
		pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
		pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
		local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";
		# fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
		# split-brain "/usr/lib/drbd/notify-split-brain.sh root";
		# out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root";
		# before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
		# after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
	}
	startup {
		# wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb
	}
	disk {
		# on-io-error fencing use-bmbv no-disk-barrier no-disk-flushes
		# no-disk-drain no-md-flushes max-bio-bvecs
	}
	net {
		# sndbuf-size rcvbuf-size timeout connect-int ping-int ping-timeout max-buffers
		# max-epoch-size ko-count allow-two-primaries cram-hmac-alg shared-secret
		# after-sb-0pri after-sb-1pri after-sb-2pri data-integrity-alg no-tcp-cork
	}
	syncer {
		# rate after al-extents use-rle cpu-mask verify-alg csums-alg
	}
}

-- no debconf information

-- Package-specific info:
** Version:
Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:27:25 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686-bigmem root=/dev/mapper/sys-root ro quiet

** Not tainted

** Kernel log:
[ 5034.677693] block drbd0: peer( Unknown -> Secondary ) conn( WFReportParams -> WFBitMapT ) pdsk( DUnknown -> UpToDate ) 
[ 5034.690089] block drbd0: conn( WFBitMapT -> WFSyncUUID ) 
[ 5034.691786] block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0
[ 5034.692927] block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0)
[ 5034.692931] block drbd0: conn( WFSyncUUID -> SyncTarget ) disk( UpToDate -> Inconsistent ) 
[ 5034.692934] block drbd0: Began resync as SyncTarget (will sync 0 KB [0 bits set]).
[ 5035.242347] block drbd0: Resync done (total 1 sec; paused 0 sec; 0 K/sec)
[ 5035.242355] block drbd0: conn( SyncTarget -> Connected ) disk( Inconsistent -> UpToDate ) 
[ 5035.242362] block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0
[ 5035.243575] block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0 exit code 0 (0x0)
[ 5046.639518] block drbd0: peer( Secondary -> Unknown ) conn( Connected -> TearDown ) pdsk( UpToDate -> DUnknown ) 
[ 5046.639942] block drbd0: meta connection shut down by peer.
[ 5046.639993] block drbd0: asender terminated
[ 5046.639994] block drbd0: Terminating drbd0_asender
[ 5046.641094] block drbd0: conn( TearDown -> Disconnecting ) 
[ 5046.659176] block drbd0: Connection closed
[ 5046.659182] block drbd0: conn( Disconnecting -> StandAlone ) 
[ 5046.659217] block drbd0: receiver terminated
[ 5046.659218] block drbd0: Terminating drbd0_receiver
[ 5046.659221] block drbd0: disk( UpToDate -> Diskless ) 
[ 5046.659296] block drbd0: drbd_bm_resize called with capacity == 0
[ 5046.659305] block drbd0: worker terminated
[ 5046.659307] block drbd0: Terminating drbd0_worker
[ 5067.155466] block drbd0: Starting worker thread (from cqueue [2337])
[ 5067.155541] block drbd0: disk( Diskless -> Attaching ) 
[ 5067.170238] block drbd0: No usable activity log found.
[ 5067.170242] block drbd0: Method to ensure write ordering: barrier
[ 5067.170247] block drbd0: Backing device's merge_bvec_fn() = f83ec7be
[ 5067.170249] block drbd0: max_segment_size ( = BIO size ) = 4096
[ 5067.170253] block drbd0: drbd_bm_resize called with capacity == 20970808
[ 5067.170305] block drbd0: resync bitmap: bits=2621351 words=81918
[ 5067.170307] block drbd0: size = 10 GB (10485404 KB)
[ 5067.172852] block drbd0: recounting of set bits took additional 0 jiffies
[ 5067.172855] block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
[ 5067.172857] block drbd0: disk( Attaching -> UpToDate ) 
[ 5067.207045] block drbd0: conn( StandAlone -> Unconnected ) 
[ 5067.207053] block drbd0: Starting receiver thread (from drbd0_worker [4338])
[ 5067.207078] block drbd0: receiver (re)started
[ 5067.207081] block drbd0: conn( Unconnected -> WFConnection ) 
[ 5067.208501] block drbd0: role( Secondary -> Primary ) 
[ 5067.212759] block drbd0: Creating new current UUID
[ 5067.503518] block drbd0: Handshake successful: Agreed network protocol version 91
[ 5067.503525] block drbd0: conn( WFConnection -> WFReportParams ) 
[ 5067.503576] block drbd0: Starting asender thread (from drbd0_receiver [4350])
[ 5067.503668] block drbd0: data-integrity-alg: <not-used>
[ 5067.503888] block drbd0: drbd_sync_handshake:
[ 5067.503894] block drbd0: self D88E7AD12FFEA493:49D971C9C18FC2FE:167E069D45704F1A:F1C0D4200B9792F4 bits:0 flags:0
[ 5067.503899] block drbd0: peer DD932456670DF62F:49D971C9C18FC2FE:167E069D45704F1A:F1C0D4200B9792F4 bits:0 flags:0
[ 5067.503903] block drbd0: uuid_compare()=100 by rule 90
[ 5067.503912] block drbd0: Split-Brain detected, dropping connection!
[ 5067.503967] block drbd0: helper command: /sbin/drbdadm split-brain minor-0
[ 5067.505109] block drbd0: helper command: /sbin/drbdadm split-brain minor-0 exit code 0 (0x0)
[ 5067.505113] block drbd0: conn( WFReportParams -> Disconnecting ) 
[ 5067.505116] block drbd0: error receiving ReportState, l: 4!
[ 5067.505193] block drbd0: asender terminated
[ 5067.505196] block drbd0: Terminating drbd0_asender
[ 5067.505287] block drbd0: Connection closed
[ 5067.505306] block drbd0: conn( Disconnecting -> StandAlone ) 
[ 5067.505339] block drbd0: receiver terminated
[ 5067.505340] block drbd0: Terminating drbd0_receiver
[ 5097.264175] block drbd0: role( Primary -> Secondary ) 
[ 5097.279065] block drbd0: disk( UpToDate -> Diskless ) 
[ 5097.279126] block drbd0: drbd_bm_resize called with capacity == 0
[ 5097.279138] block drbd0: worker terminated
[ 5097.279139] block drbd0: Terminating drbd0_worker
[ 5099.328157] block drbd0: Starting worker thread (from cqueue [2337])
[ 5099.328290] block drbd0: disk( Diskless -> Attaching ) 
[ 5099.337152] block drbd0: No usable activity log found.
[ 5099.337157] block drbd0: Method to ensure write ordering: barrier
[ 5099.337161] block drbd0: Backing device's merge_bvec_fn() = f83ec7be
[ 5099.337164] block drbd0: max_segment_size ( = BIO size ) = 4096
[ 5099.337167] block drbd0: drbd_bm_resize called with capacity == 20970808
[ 5099.337220] block drbd0: resync bitmap: bits=2621351 words=81918
[ 5099.337222] block drbd0: size = 10 GB (10485404 KB)
[ 5099.339061] block drbd0: recounting of set bits took additional 1 jiffies
[ 5099.339063] block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
[ 5099.339065] block drbd0: disk( Attaching -> UpToDate ) 
[ 5099.404651] block drbd0: conn( StandAlone -> Unconnected ) 
[ 5099.404658] block drbd0: Starting receiver thread (from drbd0_worker [4407])
[ 5099.404671] block drbd0: receiver (re)started
[ 5099.404673] block drbd0: conn( Unconnected -> WFConnection ) 
[ 5099.702044] block drbd0: Handshake successful: Agreed network protocol version 91
[ 5099.702051] block drbd0: conn( WFConnection -> WFReportParams ) 
[ 5099.702114] block drbd0: Starting asender thread (from drbd0_receiver [4419])
[ 5099.702179] block drbd0: data-integrity-alg: <not-used>
[ 5099.702204] block drbd0: drbd_sync_handshake:
[ 5099.702206] block drbd0: self D88E7AD12FFEA492:49D971C9C18FC2FE:167E069D45704F1A:F1C0D4200B9792F4 bits:0 flags:0
[ 5099.702209] block drbd0: peer DD932456670DF62E:49D971C9C18FC2FE:167E069D45704F1A:F1C0D4200B9792F4 bits:0 flags:0
[ 5099.702211] block drbd0: uuid_compare()=100 by rule 90
[ 5099.702212] block drbd0: Split-Brain detected, 0 primaries, automatically solved. Sync from peer node
[ 5099.702215] block drbd0: peer( Unknown -> Secondary ) conn( WFReportParams -> WFBitMapT ) pdsk( DUnknown -> UpToDate ) 
[ 5099.724546] block drbd0: conn( WFBitMapT -> WFSyncUUID ) 
[ 5099.726255] block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0
[ 5099.727343] block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0)
[ 5099.727346] block drbd0: conn( WFSyncUUID -> SyncTarget ) disk( UpToDate -> Inconsistent ) 
[ 5099.727349] block drbd0: Began resync as SyncTarget (will sync 0 KB [0 bits set]).
[ 5100.277608] block drbd0: Resync done (total 1 sec; paused 0 sec; 0 K/sec)
[ 5100.277616] block drbd0: conn( SyncTarget -> Connected ) disk( Inconsistent -> UpToDate ) 
[ 5100.277623] block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0
[ 5100.278829] block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0 exit code 0 (0x0)

** Model information
not available

** Loaded modules:
Module                  Size  Used by
drbd                  173356  3 
lru_cache               4054  1 drbd
cn                      3667  1 drbd
ip6table_filter         1908  0 
ip6_tables              8572  1 ip6table_filter
iptable_filter          1790  0 
ip_tables               7706  1 iptable_filter
ebtable_nat             1144  0 
ebtables               12245  1 ebtable_nat
x_tables                8327  3 ip6_tables,ip_tables,ebtables
autofs4                16667  3 
kvm_intel              32908  0 
kvm                   184962  1 kvm_intel
fuse                   44268  1 
nfsd                  193919  2 
nfs                   207282  0 
lockd                  49449  2 nfsd,nfs
fscache                24662  1 nfs
nfs_acl                 1695  2 nfsd,nfs
auth_rpcgss            25296  2 nfsd,nfs
sunrpc                134911  6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge                 33031  0 
stp                      996  1 bridge
ext3                   94396  1 
jbd                    32401  1 ext3
mbcache                 3762  1 ext3
evdev                   5609  0 
container               1833  0 
ac                      1640  0 
button                  3598  0 
snd_pcm                47386  0 
snd_timer              12270  1 snd_pcm
snd                    34423  2 snd_pcm,snd_timer
soundcore               3450  1 snd
snd_page_alloc          5113  1 snd_pcm
i2c_i801                6466  0 
pcspkr                  1207  0 
i2c_core               12787  1 i2c_i801
processor              26335  4 
power_meter             6882  0 
xfs                   415629  1 
exportfs                2618  2 nfsd,xfs
dm_mod                 46326  9 
sd_mod                 26013  3 
crc_t10dif              1012  1 sd_mod
sg                     19937  0 
sr_mod                 10770  0 
cdrom                  26435  1 sr_mod
mptsas                 26493  2 
mptscsih               14244  1 mptsas
mptbase                43928  2 mptsas,mptscsih
ehci_hcd               29101  0 
scsi_transport_sas     15169  1 mptsas
ahci                   27822  0 
e1000e                110898  0 
libata                116181  1 ahci
scsi_mod              105005  7 sd_mod,sg,sr_mod,mptsas,mptscsih,scsi_transport_sas,libata
thermal                 9206  0 
usbcore                99774  2 ehci_hcd
thermal_sys             9378  2 processor,thermal
nls_base                4541  1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM Controller [8086:0108] (rev 09)
	Subsystem: Fujitsu Technology Solutions Device [1734:11b9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Region 0: Memory at fb926000 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000

00:16.1 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #2 [8086:1c3b] (rev 04)
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Region 0: Memory at fb925000 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Fujitsu Technology Solutions Device [1734:11b7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at fb900000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at fb924000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f040 [size=32]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 41c1
	Capabilities: [e0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fb923000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fba00000-fbcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 25.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4171
	Capabilities: [90] Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fbe00000-fbefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #7, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #6, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4179
	Capabilities: [90] Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: fa000000-fb8fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4181
	Capabilities: [90] Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fb922000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Fujitsu Technology Solutions Device [1734:11cb]

00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller [8086:1c52] (rev 04)
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Fujitsu Technology Solutions Device [1734:11b8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 28
	Region 0: I/O ports at f090 [size=8]
	Region 1: I/O ports at f080 [size=4]
	Region 2: I/O ports at f070 [size=8]
	Region 3: I/O ports at f060 [size=4]
	Region 4: I/O ports at f020 [size=32]
	Region 5: Memory at fb921000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4199
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Fujitsu Technology Solutions Device [1734:11cb]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fb920000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f000 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 08)
	Subsystem: Fujitsu Technology Solutions Device [1734:1131]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at e000 [size=256]
	Region 1: Memory at fbc10000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at fbc00000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at fba00000 [disabled] [size=2M]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
		Vector table: BAR=1 offset=00002000
		PBA: BAR=1 offset=00003000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Kernel driver in use: mptsas

02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
	Subsystem: Fujitsu Technology Solutions Device [1734:1192]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbe00000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d000 [size=32]
	Region 3: Memory at fbe20000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [e0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140 v1] Device Serial Number 00-22-4d-ff-ff-67-89-7f
	Kernel driver in use: e1000e

03:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Fujitsu Technology Solutions Device [1734:11cc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at fb800000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000


** USB devices:
not available


-- System Information:
Debian Release: 6.0.6
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686-bigmem depends on:
ii  debconf [debconf-2.0]       1.5.36.1     Debian configuration management sy
ii  initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii  linux-base                  3.4~bpo60+1  Linux image base package
ii  module-init-tools           3.12-2+b1    tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686-bigmem recommends:
ii  firmware-linux-free           2.6.32-46  Binary firmware for various driver
ii  libc6-i686                    2.11.3-4   Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-686-bigmem suggests:
ii  grub                          0.97-64    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-686-bigmem is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-686-bigmem/postinst/missing-firmware-2.6.32-5-686-bigmem:
  linux-image-2.6.32-5-686-bigmem/postinst/depmod-error-initrd-2.6.32-5-686-bigmem: false
  linux-image-2.6.32-5-686-bigmem/prerm/removing-running-kernel-2.6.32-5-686-bigmem: true
  linux-image-2.6.32-5-686-bigmem/postinst/ignoring-do-bootloader-2.6.32-5-686-bigmem:

-- 
BOFH excuse #10:

hardware stress fractures

--- End Message ---
--- Begin Message ---
On Tue, Jan 15, 2013 at 05:18:23PM +0100, bd@bc-bd.org wrote:
[...]
> > The remote device was also promoted to primary before the connection was
> > established.
> > 
> > You have to wait until both machines are connected before promoting them
> > to primary. The init script does this.
> 
> TLDR: Please close this bug, the real problem lies in the drbd resource
> agent. Sorry for the noise.
[...]

OK, closing.

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

--- End Message ---

Reply to: