--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.24-etchnhalf.1-686: 2.6.24 hangs on reboot on Dell OptiPlex 330
- From: "Tzvetan Mikov" <tmikov@gmail.com>
- Date: Sat, 23 Aug 2008 16:31:59 -0700
- Message-id: <7de7f7f30808231631m4839afc9k6c904a50f490b4e1@mail.gmail.com>
Package: linux-image-2.6.24-etchnhalf.1-686
Version: 2.6.24-6~etchnhalf.4
Severity: important
I upgraded to etchnhalf and the machine started hanging on reboot. I
also tested with 2.6.24-1-686 and 2.6.25-2-686 with the same results.
Booting with "reboot=b" works around the problem.
Ubuntu bug 114854 seems like the same thing:
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/114854
It says that they fixed it, so perhaps the same patch can be used for
Debian ?
After a quick Google it seems that this problem occurs mainly on Dell
machines.
If you need, please contact me for more info.
HTH,
Tzvetan
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.4)
(dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Mon Jul 21 11:17:43 UTC 2008
** Command line:
root=/dev/sda1 ro 8250.nr_uarts=5 vga=791 splash quiet
** Not tainted
** Kernel log:
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff980800
usb 1-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Mag-Tek USB Swipe Reader as /class/input/input0
input,hidraw0: USB HID v1.00 Keyboard [Mag-Tek USB Swipe Reader] on
usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970100 irq 221
ata2: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970180 irq 221
ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 221
ata4: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970280 irq 221
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH7: not 100% native mode: will probe irqs later
ICH7: IDE port disabled
ICH7: IDE port disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
input: Power Button (FF) as /class/input/input2
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Linux agpgart interface v0.102
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 7164K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [VBTN]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k
EXT3 FS on sda1, internal journal
loop: module loaded
lp0: using parport0 (interrupt-driven).
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
mtrr: type mismatch for c07e0000,10000 old: write-back new: write-combining
mtrr: type mismatch for c07c0000,20000 old: write-back new: write-combining
mtrr: type mismatch for c0780000,40000 old: write-back new: write-combining
mtrr: type mismatch for c0700000,80000 old: write-back new: write-combining
mtrr: type mismatch for c0600000,100000 old: write-back new: write-combining
mtrr: type mismatch for c0400000,200000 old: write-back new: write-combining
mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining
** Loaded modules:
Module Size Used by
tcp_diag 1888 0
inet_diag 12328 2 tcp_diag
ac 6212 0
battery 13700 0
parport_serial 7296 0
dm_snapshot 17060 0
dm_mirror 21792 0
dm_mod 56004 2 dm_snapshot,dm_mirror
lp 11204 0
loop 16996 0
snd_hda_intel 274848 0
snd_pcm_oss 38368 0
snd_mixer_oss 15424 1 snd_pcm_oss
snd_pcm 72036 2 snd_hda_intel,snd_pcm_oss
snd_timer 21348 1 snd_pcm
snd 48772 5
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
serio_raw 6788 0
soundcore 7680 1 snd
intel_agp 23540 1
agpgart 31912 1 intel_agp
i2c_i801 9456 0
parport_pc 26340 2 parport_serial
parport 34472 2 lp,parport_pc
button 8528 0
iTCO_wdt 11396 0
evdev 11200 0
snd_page_alloc 10184 2 snd_hda_intel,snd_pcm
i2c_core 22656 1 i2c_i801
psmouse 36656 0
pcspkr 3264 0
rtc 13148 0
ext3 123272 1
jbd 43892 1 ext3
mbcache 8480 1 ext3
sd_mod 27296 3
piix 7556 0 [permanent]
generic 4484 0 [permanent]
ide_core 108740 2 piix,generic
usbhid 28032 0
hid 34400 1 usbhid
ahci 26372 2
ata_generic 7556 0
libata 144560 2 ahci,ata_generic
scsi_mod 141516 2 sd_mod,libata
ehci_hcd 32556 0
uhci_hcd 23568 0
usbcore 127724 4 usbhid,ehci_hcd,uhci_hcd
tg3 89316 0
thermal 16092 0
processor 36840 1 thermal
fan 4868 0
vga16fb 13164 0
vgastate 8352 1 vga16fb
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Unknown device
[8086:29c0] (rev 0a)
Subsystem: Dell Unknown device [1028:0220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Unknown device
[8086:29c1] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown
device [8086:29c2] (rev 0a) (prog-if 00 [VGA])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ecd8 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dff00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Unknown device
[8086:29c3] (rev 0a)
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family)
High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Unknown device [1028:0220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at ff80 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at ff60 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family)
IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7
Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01)
(prog-if 01 [AHCI 1.0])
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 221
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 01)
Subsystem: Dell Unknown device [1028:0220]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ece0 [size=32]
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink
BCM5787 Gigabit Ethernet PCI Express [14e4:169b] (rev 02)
Subsystem: Dell Unknown device [1028:0220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at dfbf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:01.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O
Controller [9710:9835] (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at dc90 [size=8]
Region 1: I/O ports at dc98 [size=8]
Region 2: I/O ports at dca0 [size=8]
Region 3: I/O ports at dca8 [size=8]
Region 4: I/O ports at dcb0 [size=8]
Region 5: I/O ports at dce0 [size=16]
03:02.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O
Controller [9710:9835] (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at dcb8 [size=8]
Region 1: I/O ports at dcc0 [size=8]
Region 2: I/O ports at dcc8 [size=8]
Region 3: I/O ports at dcd0 [size=8]
Region 4: I/O ports at dcd8 [size=8]
Region 5: I/O ports at dcf0 [size=16]
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-etchnhalf.1-686/preinst/bootloader-initrd-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/preinst/elilo-initrd-2.6.24-etchnhalf.1-686:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-overwrite-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-2.6.24-etchnhalf.1-686:
false
linux-image-2.6.24-etchnhalf.1-686/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/preinst/overwriting-modules-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/preinst/initrd-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/old-system-map-link-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-686:
false
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-initrd-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-install-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/prerm/removing-running-kernel-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-test-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/old-initrd-link-2.6.24-etchnhalf.1-686:
true
linux-image-2.6.24-etchnhalf.1-686/postinst/create-kimage-link-2.6.24-etchnhalf.1-686:
true
--- End Message ---