Your message dated Sun, 03 Jul 2011 23:35:19 +0100 with message-id <1309732519.3244.69.camel@localhost> and subject line RE: Bug#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error has caused the Debian Bug report #632248, regarding linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 632248: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632248 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error
- From: Deniz Akcal <denbian@live.com>
- Date: Thu, 30 Jun 2011 15:57:39 -0400
- Message-id: <20110630195739.14017.43650.reportbug@debian>
Package: linux-2.6 Version: 2.6.39-2 Severity: important deniz@debian:~$ lsusb | grep Western Bus 001 Device 005: ID 1058:070a Western Digital Technologies, Inc. My Passport Essential SE deniz@debian:~$ I am reporting this from Debian Wheezy/Testing but this also happens when using Squeeze's backported 2.6.38 kernel. It even occurs with Squeezes 2.6.32 main stable kernel! It gives the same or similar errror whether I do it via the CLI or the GNOME UI. I also tried with superuser privileges. I think that this error causes certain files to not be copied. Reading this Ubuntu thread (http://ubuntuforums.org/showthread.php?t=1500384) leads me to believe that it's an issue with external drives in general or using ext4. I tried copying using the GNOME UI with the "Skip all" option when confronted with the error and I ended up with certain files missing. There are many more threads from the looks of it: http://www.scroogle.org/cgi-bin/nbbw.cgi?Gw=Error+splicing+file%3A+Input%2Foutput+error If more information is needed or if you want me to do some additional testing, just ask. P.S. I also think it's likely that this bug carries through to newer kernels than the one I am filing the bug for but I am filing it for this version since this is the latest version that I have tested since the most recent Linux distro I run is Debian Wheezy/Testing. -- Package-specific info: ** Version: Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.39-2-amd64 root=/dev/mapper/debian-root ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 6457.609527] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ca a8 00 00 68 00 [ 6457.609541] end_request: critical target error, dev sdc, sector 46451368 [ 6461.034628] sd 4:0:0:0: [sdc] Unhandled sense code [ 6461.034633] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6461.034672] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6461.034679] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6461.034686] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 dd 80 00 00 f0 00 [ 6461.034700] end_request: critical target error, dev sdc, sector 46456192 [ 6464.393880] sd 4:0:0:0: [sdc] Unhandled sense code [ 6464.393885] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6464.393891] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6464.393898] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6464.393905] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 dd 80 00 00 80 00 [ 6464.393919] end_request: critical target error, dev sdc, sector 46456192 [ 6467.960006] sd 4:0:0:0: [sdc] Unhandled sense code [ 6467.960011] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6467.960018] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6467.960035] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6467.960042] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 e3 80 00 00 30 00 [ 6467.960063] end_request: critical target error, dev sdc, sector 46457728 [ 6471.107506] sd 4:0:0:0: [sdc] Unhandled sense code [ 6471.107512] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6471.107518] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6471.107525] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6471.107532] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 e9 78 00 00 08 00 [ 6471.107546] end_request: critical target error, dev sdc, sector 46459256 [ 6474.546010] sd 4:0:0:0: [sdc] Unhandled sense code [ 6474.546016] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6474.546022] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6474.546029] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6474.546036] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ef 70 00 00 58 00 [ 6474.546049] end_request: critical target error, dev sdc, sector 46460784 [ 6477.906011] sd 4:0:0:0: [sdc] Unhandled sense code [ 6477.906016] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6477.906023] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6477.906030] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6477.906036] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 f5 60 00 00 f0 00 [ 6477.906050] end_request: critical target error, dev sdc, sector 46462304 [ 6480.936386] sd 4:0:0:0: [sdc] Unhandled sense code [ 6480.936391] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6480.936398] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6480.936405] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6480.936411] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 f5 60 00 00 80 00 [ 6480.936425] end_request: critical target error, dev sdc, sector 46462304 [ 6483.961639] sd 4:0:0:0: [sdc] Unhandled sense code [ 6483.961644] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6483.961651] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6483.961657] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6483.961664] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 fb 30 00 00 f0 00 [ 6483.961678] end_request: critical target error, dev sdc, sector 46463792 [ 6487.206517] sd 4:0:0:0: [sdc] Unhandled sense code [ 6487.206523] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6487.206529] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6487.206536] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6487.206542] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 fb 30 00 00 80 00 [ 6487.206556] end_request: critical target error, dev sdc, sector 46463792 [ 6493.659395] sd 4:0:0:0: [sdc] Unhandled sense code [ 6493.659400] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6493.659406] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6493.659413] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6493.659420] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 50 d8 00 00 f0 00 [ 6493.659434] end_request: critical target error, dev sdc, sector 46485720 [ 6497.561024] sd 4:0:0:0: [sdc] Unhandled sense code [ 6497.561029] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6497.561036] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6497.561043] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6497.561050] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 50 d8 00 00 80 00 [ 6497.561063] end_request: critical target error, dev sdc, sector 46485720 [ 6502.652274] sd 4:0:0:0: [sdc] Unhandled sense code [ 6502.652279] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6502.652286] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6502.652293] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6502.652300] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 8d f0 00 00 10 00 [ 6502.652313] end_request: critical target error, dev sdc, sector 46435824 [ 6510.967023] sd 4:0:0:0: [sdc] Unhandled sense code [ 6510.967029] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6510.967035] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6510.967042] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6510.967049] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ac 00 00 00 f0 00 [ 6510.967062] end_request: critical target error, dev sdc, sector 46443520 [ 6514.647407] sd 4:0:0:0: [sdc] Unhandled sense code [ 6514.647412] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6514.647419] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6514.647425] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6514.647432] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c4 ac 90 00 00 60 00 [ 6514.647446] end_request: critical target error, dev sdc, sector 46443664 [ 6517.915907] sd 4:0:0:0: [sdc] Unhandled sense code [ 6517.915912] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6517.915919] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6517.915926] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6517.915933] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 8c f0 00 00 f0 00 [ 6517.915946] end_request: critical target error, dev sdc, sector 46501104 [ 6523.852655] sd 4:0:0:0: [sdc] Unhandled sense code [ 6523.852660] sd 4:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 6523.852667] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 6523.852674] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 6523.852680] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 02 c5 8d 70 00 00 70 00 [ 6523.852694] end_request: critical target error, dev sdc, sector 46501232 [ 7081.072997] WARNING! power/level is deprecated; use power/control instead [ 7081.152420] usb 1-7: USB disconnect, device number 5 ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: P31-S3G product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F1 board_vendor: Gigabyte Technology Co., Ltd. board_name: P31-S3G board_version: x.x ** Loaded modules: Module Size Used by sg 25769 0 sr_mod 21824 0 ses 13078 0 enclosure 13307 1 ses cdrom 35134 1 sr_mod mperf 12411 0 xt_multiport 12518 1 cpufreq_userspace 12576 0 cpufreq_conservative 13147 0 cpufreq_powersave 12454 0 iptable_filter 12536 1 cpufreq_stats 12713 0 ip_tables 21818 1 iptable_filter x_tables 18886 3 xt_multiport,iptable_filter,ip_tables vboxnetadp 13185 0 vboxnetflt 24179 0 vboxdrv 178736 2 vboxnetadp,vboxnetflt binfmt_misc 12914 1 fuse 61554 1 nfsd 258506 2 nfs 251154 0 lockd 70844 2 nfsd,nfs fscache 36071 1 nfs auth_rpcgss 36788 2 nfsd,nfs nfs_acl 12511 2 nfsd,nfs sunrpc 162130 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl ext3 112254 1 jbd 41698 1 ext3 loop 22479 0 ir_lirc_codec 12747 0 lirc_dev 12925 1 ir_lirc_codec tea5767 12741 0 ir_sony_decoder 12435 0 tuner 21565 1 ir_jvc_decoder 12433 0 ir_rc6_decoder 12433 0 arc4 12458 2 ir_rc5_decoder 12433 0 ir_nec_decoder 12433 0 ecb 12737 2 cx8800 35465 0 rt61pci 26640 0 crc_itu_t 12347 1 rt61pci cx88xx 71924 1 cx8800 rc_core 18165 7 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx i2c_algo_bit 12834 1 cx88xx snd_hda_codec_hdmi 22174 1 tveeprom 20593 1 cx88xx rt2x00pci 12779 1 rt61pci snd_hda_codec_realtek 283734 1 rt2x00lib 37704 2 rt61pci,rt2x00pci v4l2_common 13186 3 tuner,cx8800,cx88xx i2c_i801 16870 0 videodev 66266 4 tuner,cx8800,cx88xx,v4l2_common media 18148 1 videodev v4l2_compat_ioctl32 16575 1 videodev mac80211 181270 2 rt2x00pci,rt2x00lib snd_hda_intel 25946 3 i2c_core 23766 9 tea5767,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_i801,videodev snd_hda_codec 67865 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel psmouse 55199 0 serio_raw 12878 0 fglrx 2678489 91 cfg80211 126244 2 rt2x00lib,mac80211 rfkill 19014 1 cfg80211 snd_hwdep 13148 1 snd_hda_codec snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 22658 1 snd_pcm snd 52324 13 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 13014 1 snd snd_page_alloc 12969 2 snd_hda_intel,snd_pcm parport_pc 22191 0 rng_core 12614 0 videobuf_dma_sg 13152 2 cx8800,cx88xx button 12895 1 fglrx videobuf_core 17804 3 cx8800,cx88xx,videobuf_dma_sg btcx_risc 12555 2 cx8800,cx88xx parport 31650 1 parport_pc pcspkr 12579 0 eeprom_93cx6 12455 1 rt61pci evdev 17475 8 processor 27431 0 thermal_sys 17939 1 processor ext4 317160 2 mbcache 12930 2 ext3,ext4 jbd2 65105 1 ext4 crc16 12343 1 ext4 usbhid 39946 0 hid 72745 1 usbhid dm_mod 62468 11 usb_storage 43639 0 uas 13151 0 sd_mod 35644 3 crc_t10dif 12348 1 sd_mod ata_generic 12479 0 uhci_hcd 26290 0 ata_piix 25319 2 libata 151572 2 ata_generic,ata_piix ehci_hcd 39487 0 floppy 56861 0 scsi_mod 161557 7 sg,sr_mod,ses,usb_storage,uas,sd_mod,libata usbcore 127203 6 usbhid,usb_storage,uas,uhci_hcd,ehci_hcd r8169 37356 0 mii 12675 1 r8169 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f4000000-f5ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa300000-fa4fffff Prefetchable memory behind bridge: 00000000fa500000-00000000fa6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000fa100000-00000000fa2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e300 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e100 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e200 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fa004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-f9ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 80 [Master]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:2470] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at f5000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at b000 [size=256] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: fglrx_pci 01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] Subsystem: XFX Pine Group Inc. Device [1682:aa30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 45 Region 0: Memory at f5010000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at c000 [size=256] Region 2: Memory at f7000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fa100000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx8800 04:01.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01) Subsystem: Conexant Systems, Inc. Dynalink 56PMi [14f1:2004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at d000 [size=8] Capabilities: <access denied> 04:02.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302] Subsystem: Alpha Networks Inc. Device [1948:3c83] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f9010000 (32-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: rt61pci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 045e:071f Microsoft Corp. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.39-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.39-2-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-2.6.39-2-amd64 suggests: ii grub-pc 1.99-6 GRand Unified Bootloader, version pn linux-doc-2.6.39 <none> (no description available) Versions of packages linux-image-2.6.39-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.30 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk: * linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64: linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true
--- End Message ---
--- Begin Message ---
- To: 632248-done@bugs.debian.org
- Subject: RE: Bug#632248: linux-image-2.6.39-2-amd64: Copying from my external Western Digital hard drive gives "Error splicing file: Input/output error" error
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 03 Jul 2011 23:35:19 +0100
- Message-id: <1309732519.3244.69.camel@localhost>
- In-reply-to: <SNT122-w41B03DA033B52A3CD7B1A7C85D0@phx.gbl>
- References: <20110630195739.14017.43650.reportbug@debian> ,<20110630203135.GE29924@decadent.org.uk> ,<[🔎] SNT122-w308BEEBCD77B6503A2C8C2C85D0@phx.gbl> <SNT122-w41B03DA033B52A3CD7B1A7C85D0@phx.gbl>
On Sun, 2011-07-03 at 18:09 -0400, Deniz Akcal wrote: > I forgot to post these tests I ran in Windows before reformatting > using HDDScan (a freeware tool). I'm attaching the test outcomes in a > zip file. I was actually referring to the manufacturer's diagnostic program, which should be available from <http://support.wdc.com/product/download.asp?wdc_lang=en&fid=wdsfMyPassport_Essential_SE>. Anyway, this tool seems to have detected new bad sectors. So this is a hardware fault and not a bug. [...] > Is it normal for the drive to work perfectly on its way to death or is > there still hope for me (and work for you lol)? This is normal behaviour if there is localised damage to a disk surface rather than to a head or motor. > This drive is probably about a year old so I'm really unlucky > especially since it was a gift and I don't have the receipt. I think you can get a replacement with just the serial number: <http://websupport.wdc.com/warranty/rmainfo.asp?custtype=end&lang=en>. Ben. -- Ben Hutchings Computers are not intelligent. They only think they are.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---