[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#632187: linux-image-2.6.32-5-amd64: kernel hangs for 120 seconds while booting



Package: linux-2.6
Version: 2.6.32-35
Severity: important

the kernel hangs while booting for 120 and has this error in the kernel-log


-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=UUID=027d2b15-ed0b-4609-b1b4-da974ef9bdf0 ro rootdelay=9

** Not tainted

** Kernel log:
[  360.749487]  0000000000015780 0000000000015780 ffff88013cbbcdb0
ffff88013cbbd0a8
[  360.749706] Call Trace:
[  360.749769]  [<ffffffff812fbab6>] ? mutex_lock+0xd/0x31
[  360.749831]  [<ffffffff810a8a0f>] ? trace_module_notify+0x46e/0x47f
[  360.749894]  [<ffffffffa00aa000>] ? wait_scan_init+0x0/0xd
[scsi_wait_scan]
[  360.749957]  [<ffffffff8122133d>] ? wait_for_device_probe+0x64/0x83
[  360.750017]  [<ffffffff81064f1a>] ? autoremove_wake_function+0x0/0x2e
[  360.750078]  [<ffffffff810689cd>] ?
__blocking_notifier_call_chain+0x51/0x5f
[  360.750140]  [<ffffffffa00aa009>] ? wait_scan_init+0x9/0xd
[scsi_wait_scan]
[  360.750201]  [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[  360.750261]  [<ffffffff8107a9cc>] ? sys_init_module+0xc5/0x21a
[  360.750320]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[  480.748022] INFO: task modprobe:267 blocked for more than 120 seconds.
[  480.748084] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  480.748157] modprobe      D ffff88013cbbd4c0     0   267     77
0x00000000
[  480.748291]  ffff88013cbbd4c0 0000000000000086 0000000000000000
ffff88013ca0cd80
[  480.748510]  ffffc90000623bc0 0000001000000000 000000000000f9e0
ffff88013c2d3fd8
[  480.748730]  0000000000015780 0000000000015780 ffff88013cbbcdb0
ffff88013cbbd0a8
[  480.748960] Call Trace:
[  480.749019]  [<ffffffff812fbab6>] ? mutex_lock+0xd/0x31
[  480.749079]  [<ffffffff810a8a0f>] ? trace_module_notify+0x46e/0x47f
[  480.749141]  [<ffffffffa00aa000>] ? wait_scan_init+0x0/0xd
[scsi_wait_scan]
[  480.749203]  [<ffffffff8122133d>] ? wait_for_device_probe+0x64/0x83
[  480.749262]  [<ffffffff81064f1a>] ? autoremove_wake_function+0x0/0x2e
[  480.749322]  [<ffffffff810689cd>] ?
__blocking_notifier_call_chain+0x51/0x5f
[  480.749384]  [<ffffffffa00aa009>] ? wait_scan_init+0x9/0xd
[scsi_wait_scan]
[  480.749444]  [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[  480.749503]  [<ffffffff8107a9cc>] ? sys_init_module+0xc5/0x21a
[  480.749562]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[  547.148010] megaraid: sync cmd failed
[  555.148009] megaraid: blocked mailbox
[  555.148067] megaraid: Inquiry3 failed
[  555.148220] megaraid: maibox adapter did not initialize
[  555.148290] megaraid 0000:05:00.0: PCI INT A disabled
[  564.187021] PM: Starting manual resume from disk
[  564.187095] PM: Resume from partition 8:2
[  564.187097] PM: Checking hibernation image.
[  564.187261] PM: Error -22 checking image file
[  564.187265] PM: Resume from disk failed.
[  564.196441] PM: Marking nosave pages: 00000000000a0000 - 0000000000100000
[  564.196450] PM: Marking nosave pages: 00000000bffc0000 - 0000000100000000
[  564.198165] PM: Basic memory bitmaps created
[  564.226877] PM: Basic memory bitmaps freed
[  564.264248] kjournald starting.  Commit interval 5 seconds
[  564.264261] EXT3-fs: mounted filesystem with ordered data mode.
[  566.832989] udev[379]: starting version 164
[  567.389886] processor LNXCPU:00: registered as cooling_device0
[  567.390085] processor LNXCPU:01: registered as cooling_device1
[  567.390250] processor LNXCPU:02: registered as cooling_device2
[  567.390405] processor LNXCPU:03: registered as cooling_device3
[  567.391876] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[  567.391990] ACPI: Power Button [PWRF]
[  567.394532] input: PC Speaker as /devices/platform/pcspkr/input/input3
[  567.444663] EDAC MC: Ver: 2.1.0 Jun 14 2011
[  567.453869] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD
(20090903/video-1882)
[  567.454274] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input4
[  567.454516] ACPI: Video Device [EVGA] (multi-head: no  rom: yes 
post: no)
[  567.455925] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[  567.480922] Contact your BIOS vendor to see if the E752x error
registers can be safely un-hidden
[  567.558398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  567.574547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  567.602261] udev[401]: renamed network interface eth2 to eth2-eth1
[  567.605980] udev[394]: renamed network interface eth1 to eth2
[  567.653274] udev[401]: renamed network interface eth2-eth1 to eth1
[  567.817573] intel_rng: FWH not detected
[  567.831707] intel_rng: FWH not detected
[  567.930302] [drm] Initialized drm 1.1.0 20060810
[  568.011535] st0: Block limits 1 - 16777215 bytes.
[  568.116419] [drm] radeon defaulting to userspace modesetting.
[  568.116873] pci 0000:12:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  568.117174] [drm] Initialized radeon 1.32.0 20080528 for 0000:12:0d.0
on minor 0
[  568.215972] Error: Driver 'pcspkr' is already registered, aborting...
[  568.241078] Error: Driver 'pcspkr' is already registered, aborting...
[  568.444110] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[  570.259725] Adding 9767512k swap on /dev/sda2.  Priority:-1 extents:1
across:9767512k
[  570.392779] EXT3 FS on sda3, internal journal
[  570.595110] loop: module loaded
[  570.637640] ipmi message handler version 39.2
[  570.641541] IPMI System Interface driver.
[  570.641612] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o
address 0xca8, slave address 0x20, irq 0
[  571.239971] ipmi: Found new BMC (man_id: 0x0002a2,  prod_id: 0x0000,
dev_id: 0x20)
[  571.240079] IPMI kcs interface initialized
[  571.255583] ipmi device interface
[  573.157941] fuse init (API version 7.13)
[  573.250741] kjournald starting.  Commit interval 5 seconds
[  573.250865] EXT3 FS on sda1, internal journal
[  573.250968] EXT3-fs: mounted filesystem with ordered data mode.
[  573.265065] kjournald starting.  Commit interval 5 seconds
[  573.265287] EXT3 FS on sdb2, internal journal
[  573.265390] EXT3-fs: mounted filesystem with ordered data mode.
[  573.275617] kjournald starting.  Commit interval 5 seconds
[  573.275724] EXT3 FS on sdb1, internal journal
[  573.275826] EXT3-fs: mounted filesystem with ordered data mode.
[  573.286228] kjournald starting.  Commit interval 5 seconds
[  573.286452] EXT3 FS on sdb3, internal journal
[  573.286554] EXT3-fs: mounted filesystem with ordered data mode.
[  575.179958] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  575.180298] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX/TX
[  575.181018] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  585.956274] eth0: no IPv6 routers present

** Model information
sys_vendor: Dell Computer Corporation
product_name: PowerEdge 2800
product_version:
chassis_vendor: Dell Computer Corporation
chassis_version:
bios_vendor: Dell Computer Corporation
bios_version: A06
board_vendor: Dell Computer Corporation
board_name: 0T7916
board_version: A02

** Loaded modules:
Module                  Size  Used by
binfmt_misc             6431  1
fuse                   50892  1
ipmi_devintf            6587  0
ipmi_si                30960  0
ipmi_msghandler        26634  2 ipmi_devintf,ipmi_si
loop                   11799  0
snd_pcm_oss            32591  0
snd_mixer_oss          12606  1 snd_pcm_oss
radeon                574844  0
ttm                    40146  1 radeon
drm_kms_helper         20369  1 radeon
snd_pcm                60503  1 snd_pcm_oss
drm                   142327  3 radeon,ttm,drm_kms_helper
i2c_algo_bit            4225  1 radeon
i2c_core               15819  4 radeon,drm_kms_helper,drm,i2c_algo_bit
rng_core                3006  0
snd_timer              15582  1 snd_pcm
psmouse                49937  0
snd                    46526  4 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
shpchp                 26264  0
soundcore               4598  1 snd
pci_hotplug            21203  1 shpchp
snd_page_alloc          6249  1 snd_pcm
e752x_edac              9393  0
dcdbas                  5048  0
video                  17445  0
evdev                   7352  6
edac_core              29261  1 e752x_edac
output                  1692  1 video
pcspkr                  1699  0
serio_raw               3752  0
button                  4650  0
processor              29935  0
ext3                  106630  5
jbd                    37085  1 ext3
mbcache                 5050  1 ext3
sd_mod                 29921  8
crc_t10dif              1276  1 sd_mod
osst                   45317  0
st                     30916  0
ch                      9992  0
sg                     24069  0
sr_mod                 12602  0
cdrom                  29415  1 sr_mod
ata_generic             3239  0
uhci_hcd               18521  0
ata_piix               21124  0
libata                133760  2 ata_generic,ata_piix
qla1280                19065  0
aic7xxx               107123  1
floppy                 49087  0
scsi_transport_spi     18774  1 aic7xxx
thermal                11674  0
i2o_core               30751  0
megaraid_mbox          23160  6
e1000                  85517  0
ehci_hcd               32081  0
usbcore               122498  3 uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
scsi_mod              126517  11
sd_mod,osst,st,ch,sg,sr_mod,libata,qla1280,aic7xxx,scsi_transport_spi,megaraid_mbox
megaraid_mm             6449  1 megaraid_mbox
thermal_sys            11942  3 video,processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller
Hub [8086:3590] (rev 09)
        Subsystem: Dell Device [1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [40] Vendor Specific Information: Len=05 <?>

00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI
Express Port A [8086:3595] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe400000-feafffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000d7ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4151
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI
Express Port A1 [8086:3596] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fdf00000-fe3fffff
        Prefetchable memory behind bridge: 00000000da000000-00000000da0fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4159
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express
Port B [8086:3597] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fde00000-fdefffff
        Prefetchable memory behind bridge: 00000000d9000000-00000000d9ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4161
        Capabilities: [64] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+
Surprise-
                        Slot #6, PowerLimit 25.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet+ CmdCplt-
HPIrq+ LinkChg-
                        Control: AttnInd Off, PwrInd Off, Power+ Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt+
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port B1
[8086:3598] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0e, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff
        Memory behind bridge: fd900000-fddfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4169
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C
[8086:3599] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0f, subordinate=11, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fd800000-fd8fffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4171
        Capabilities: [64] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+
Surprise-
                        Slot #7, PowerLimit 25.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet+ CmdCplt-
HPIrq+ LinkChg-
                        Control: AttnInd Off, PwrInd Off, Power+ Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt+
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 7ce0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 7cc0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 7ca0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=12, subordinate=12, sec-latency=32
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: fd600000-fd7fffff
        Prefetchable memory behind bridge: c0000000-c7ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin A routed to IRQ 0
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at fc00 [size=16]
        Region 5: Memory at da100000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix

01:00.0 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O
processor (A-Segment Bridge) [8086:0330] (rev 06) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
        Memory behind bridge: fe900000-feafffff
        Prefetchable memory behind bridge: 00000000d7f00000-00000000d7ffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=133MHz
                Status: Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

01:00.2 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O
processor (B-Segment Bridge) [8086:0332] (rev 06) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=01, secondary=03, subordinate=05, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe500000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=01:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

02:0e.0 RAID bus controller [0104]: Dell PowerEdge Expandable RAID
controller 4 [1028:0013] (rev 06)
        Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
[1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping+ SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (32000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at d7ff0000 (32-bit, prefetchable) [size=64K]
        Region 2: Memory at fe9c0000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at fea00000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] PCI-X non-bridge device
                Command: DPERE- ERO- RBC=512 OST=4
                Status: Dev=02:0e.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: megaraid

03:0b.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154
[1011:0026] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe600000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

04:00.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154
[1011:0026] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
        Memory behind bridge: fe800000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual
Channel Ultra3 SCSI Processor [1077:1216] (rev 06)
        Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID
[101e:8493]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (16000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 7
        Region 0: I/O ports at ec00 [size=256]
        Region 1: Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fe700000 [disabled] [size=128K]
        Capabilities: [44] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

05:00.0 I2O [0e00]: American Megatrends Inc. MegaRAID [101e:1960] (rev
20) (prog-if 01)
        Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 37
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at fe800000 [disabled] [size=64K]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

06:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: fe200000-fe3fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

06:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=06, secondary=08, subordinate=08, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe000000-fe1fffff
        Prefetchable memory behind bridge: 00000000da000000-00000000da0fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=06:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

07:04.0 Ethernet controller [0200]: Intel Corporation 82543GC Gigabit
Ethernet Controller (Fiber) [8086:1001] (rev 02)
        Subsystem: Intel Corporation PRO/1000 F Server Adapter [8086:1003]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 106
        Region 0: Memory at fe2e0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at fe2d0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fe300000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: e1000

08:02.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
        Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 96
        BIST result: 00
        Region 0: I/O ports at dc00 [disabled] [size=256]
        Region 1: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at fe100000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: aic7xxx

08:02.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
        Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 97
        BIST result: 00
        Region 0: I/O ports at d800 [disabled] [size=256]
        Region 1: Memory at fe0fe000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at da000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: aic7xxx

0c:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=0c, secondary=0d, subordinate=0d, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fdc00000-fddfffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=0c:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

0c:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=0c, secondary=0e, subordinate=0e, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fda00000-fdbfffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=0c:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

0d:07.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit
Ethernet Controller [8086:1076] (rev 05)
        Subsystem: Dell PRO/1000 MT Network Connection [1028:016d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 64
        Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at bcc0 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device
                Command: DPERE- ERO+ RBC=512 OST=1
                Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: e1000

0e:08.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit
Ethernet Controller [8086:1076] (rev 05)
        Subsystem: Dell PRO/1000 MT Network Connection [1028:016d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 65
        Region 0: Memory at fdae0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at acc0 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device
                Command: DPERE- ERO+ RBC=512 OST=1
                Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: e1000

12:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 8c00 [size=256]
        Region 2: Memory at fd6f0000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at fd600000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 413c:a001 Dell Computer Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.36.1    Debian configuration
management sy
ii  initramfs-tools [linux-initr 0.98.8      tools for generating an
initramfs
ii  linux-base                   3.2~bpo60+1 Linux image base package
ii  module-init-tools            3.12-1      tools for managing Linux
kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-35  Binary firmware for various
driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader
(dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.28       Binary firmware for various
driver
ii  firmware-qlogic               0.28       Binary firmware for QLogic
IBA7220
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
 
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
false
 
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
true



Reply to: