Bug#637436: linux-image-3.0.0-1-amd64: kernel BUG at mm/slab.c:3059!
Package: linux-2.6
Version: 3.0.0-1
Severity: important
Hi!
I was using my computer and saw a kernel BUG:
Aug 11 08:58:13 sti-nelson kernel: [144574.621166] kernel BUG at /tmp/buildd/linux-2.6-3.0.0/debian/build/source_amd64_none/mm/slab.c:3059!
Aug 11 08:58:13 sti-nelson kernel: [144574.621176] invalid opcode: 0000 [#1] SMP
Aug 11 08:58:13 sti-nelson kernel: [144574.621190] CPU 1
Aug 11 08:58:13 sti-nelson kernel: [144574.621193] Modules linked in: des_generic ecb md4 hmac nls_utf8 cifs fscache btrfs zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd ext2 ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp powernow_k8 cpufreq_conservative cpufreq_userspace cpufreq_stats mperf cpufreq_powersave ppdev lp binfmt_misc fuse loop kvm_amd kvm usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device ohci_hcd snd ehci_hcd nouveau ttm drm_kms_helper drm usbcore sg soundcore k8temp r8169 sr_mod mii i2c_algo_bit mxm_wmi wmi sp5100_tco edac_core ata_generic i2c_piix4 edac_mce_amd snd_page_alloc i2c_core video evdev cdrom pata_atiixp parport_pc floppy psmouse parport button serio_raw processor ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif ahci libahci fan thermal therma
l_sys libata scsi_mod
Aug 11 08:58:13 sti-nelson kernel: [144574.621406]
Aug 11 08:58:13 sti-nelson kernel: [144574.621410] Pid: 25134, comm: chromium Not tainted 3.0.0-1-amd64 #1 Itautec S.A. Infoway/SM 3321
Aug 11 08:58:13 sti-nelson kernel: [144574.621422] RIP: 0010:[<ffffffff810ec222>] [<ffffffff810ec222>] ____cache_alloc+0x133/0x258
Aug 11 08:58:13 sti-nelson kernel: [144574.621436] RSP: 0018:ffff880138f0fe58 EFLAGS: 00010046
Aug 11 08:58:13 sti-nelson kernel: [144574.621442] RAX: ffff88007d03e000 RBX: ffff88013f000040 RCX: 0000000000000070
Aug 11 08:58:13 sti-nelson kernel: [144574.621450] RDX: 000000000000002c RSI: dead000000100100 RDI: ffff88013f044450
Aug 11 08:58:13 sti-nelson kernel: [144574.621457] RBP: 0000000000000010 R08: ffff88013f044460 R09: 0000000000000010
Aug 11 08:58:13 sti-nelson kernel: [144574.621464] R10: 000000000000005b R11: 0000000000000246 R12: ffff88013af42800
Aug 11 08:58:13 sti-nelson kernel: [144574.621471] R13: ffff88013f044440 R14: 0000000000000000 R15: 00000000000492d0
Aug 11 08:58:13 sti-nelson kernel: [144574.621479] FS: 00007ffbfbd22960(0000) GS:ffff88013fc80000(0000) knlGS:000000000c098840
Aug 11 08:58:13 sti-nelson kernel: [144574.621487] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Aug 11 08:58:13 sti-nelson kernel: [144574.621494] CR2: 00007ffbfd997fa0 CR3: 0000000138e4d000 CR4: 00000000000006e0
Aug 11 08:58:13 sti-nelson kernel: [144574.621501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Aug 11 08:58:13 sti-nelson kernel: [144574.621508] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Aug 11 08:58:13 sti-nelson kernel: [144574.621516] Process chromium (pid: 25134, threadinfo ffff880138f0e000, task ffff880139bad0e0)
Aug 11 08:58:13 sti-nelson kernel: [144574.621524] Stack:
Aug 11 08:58:13 sti-nelson kernel: [144574.621527] 0000000000012c00 ffffffff0000003c ffff88000243eee0 0000000000000000
Aug 11 08:58:13 sti-nelson kernel: [144574.621540] 0000000000000020 ffff88013f000040 00000000000080d0 00000000000080d0
Aug 11 08:58:13 sti-nelson kernel: [144574.621551] 0000000000000292 ffffffff810ecd4b ffff880138f0ff48 0000000000000000
A picture with a call trace (that isn't available in the log file) is
available at http://people.debian.org/~naoliv/misc/kernel-bug-slab.jpg
I was able to find only this on google: https://lkml.org/lkml/2011/8/4/308
I can give more information or test any patch if needed.
Thank you!
Best regards,
Nelson
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=c73f4307-2dce-4e31-939c-e6cb20668551 ro quiet
** Not tainted
** Kernel log:
[ 4.686026] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.687228] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096d80c1)
[ 4.690301] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 4.753693] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.753697] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.753700] [drm] nouveau 0000:01:00.0: Bios version 62.94.64.00
[ 4.753703] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 4.753706] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 4.753710] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04011310 00000028
[ 4.753712] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 4.753714] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02000300 00000028
[ 4.753717] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080
[ 4.753720] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 4.753723] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 4.753726] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 4.753729] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 4.753731] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 4.753734] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 4.753738] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD2D9
[ 4.778881] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD756
[ 4.782222] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7A6
[ 4.782231] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE8C7
[ 4.783301] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB44
[ 4.783306] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBA9
[ 4.796035] usb 2-1: new low speed USB device number 2 using ohci_hcd
[ 4.803152] [drm] nouveau 0000:01:00.0: 0xEBA9: Condition still not met after 20ms, skipping following opcodes
[ 4.807177] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[ 4.825824] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 4.825828] [drm] nouveau 0000:01:00.0: 3: memory 400MHz core 550MHz shader 1350MHz fanspeed 100%
[ 4.825842] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 400MHz shader 800MHz
[ 4.825897] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.825900] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.825902] usb usb6: Product: OHCI Host Controller
[ 4.825904] usb usb6: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 4.825906] usb usb6: SerialNumber: 0000:00:13.4
[ 4.825946] [TTM] Zone kernel: Available graphics memory: 2031438 kiB.
[ 4.825948] [TTM] Initializing pool allocator.
[ 4.825966] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 4.827055] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.835830] hub 6-0:1.0: USB hub found
[ 4.835838] hub 6-0:1.0: 2 ports detected
[ 4.836308] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 4.836310] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 4.836905] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.836907] [drm] No driver support for vblank timestamp query.
[ 4.840180] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.914706] hda_codec: ALC883: BIOS auto-probing.
[ 4.920734] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
[ 4.965055] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
[ 4.965059] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.965062] usb 2-1: Product: Dell USB Keyboard
[ 4.965063] usb 2-1: Manufacturer: Dell
[ 5.059886] [drm] nouveau 0000:01:00.0: allocated 1440x1024 fb: 0x40000000, bo ffff880136de1c00
[ 5.059948] fbcon: nouveaufb (fb0) is primary device
[ 5.100031] usb 2-2: new low speed USB device number 3 using ohci_hcd
[ 5.124839] Console: switching to colour frame buffer device 160x56
[ 5.126637] fb0: nouveaufb frame buffer device
[ 5.126639] drm: registered panic notifier
[ 5.126719] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 5.267057] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 5.267061] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.267064] usb 2-2: Product: USB OPTICAL MOUSE
[ 5.267065] usb 2-2: Manufacturer: PIXART
[ 5.884307] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3
[ 5.884403] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[ 5.889243] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4
[ 5.889347] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 5.889363] usbcore: registered new interface driver usbhid
[ 5.889365] usbhid: USB HID core driver
[ 6.092217] kvm: Nested Virtualization enabled
[ 6.810070] Adding 3929084k swap on /dev/sda3. Priority:-1 extents:1 across:3929084k
[ 6.814112] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.027379] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.173003] loop: module loaded
[ 7.715888] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.918932] r8169 0000:02:00.0: eth0: link down
[ 8.918939] r8169 0000:02:00.0: eth0: link down
[ 8.919497] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.111447] fuse init (API version 7.16)
[ 11.667668] r8169 0000:02:00.0: eth0: link up
[ 11.668250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.621588] lp0: using parport0 (interrupt-driven).
[ 15.785340] ppdev: user-space parallel port driver
[ 20.018484] Bridge firewalling registered
[ 20.407561] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.716372] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 21.416698] Ebtables v2.0 registered
[ 21.539774] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.541246] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00)
[ 21.541300] powernow-k8: fid 0x15 (2900 MHz), vid 0x7
[ 21.541302] powernow-k8: fid 0x14 (2800 MHz), vid 0x8
[ 21.541304] powernow-k8: fid 0x12 (2600 MHz), vid 0xa
[ 21.541305] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
[ 21.541307] powernow-k8: fid 0xe (2200 MHz), vid 0xe
[ 21.541308] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 21.541310] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 21.541312] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 27.321951] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.890055] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 56.072181] exe (2621): /proc/2621/oom_adj is deprecated, please use /proc/2621/oom_score_adj instead.
** Model information
sys_vendor: Itautec S.A.
product_name: Infoway
product_version: Corp
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Itautec SM 3321 BIOS
bios_version: Itautec SM 3321 BIOS Revision 0204
board_vendor: Itautec S.A.
board_name: SM 3321
board_version: SM-3321 Padrao 04(Itautec_M)
** Loaded modules:
Module Size Used by
ip6table_filter 12540 0
powernow_k8 17688 1
ip6_tables 22263 1 ip6table_filter
cpufreq_conservative 13147 0
ebtable_nat 12580 0
cpufreq_userspace 12576 0
ebtables 26250 1 ebtable_nat
cpufreq_stats 12862 0
mperf 12453 1 powernow_k8
ipt_REJECT 12502 2
xt_CHECKSUM 12471 1
iptable_mangle 12536 1
cpufreq_powersave 12454 0
xt_tcpudp 12570 5
iptable_filter 12536 1
ip_tables 22131 2 iptable_mangle,iptable_filter
x_tables 19024 9 ip6table_filter,ip6_tables,ebtables,ipt_REJECT,xt_CHECKSUM,iptable_mangle,xt_tcpudp,iptable_filter,ip_tables
bridge 66612 0
stp 12435 1 bridge
ppdev 12763 0
lp 17270 0
binfmt_misc 13040 1
fuse 62334 1
loop 22711 0
kvm_amd 51180 0
kvm 268970 1 kvm_amd
usbhid 40516 0
hid 73172 1 usbhid
snd_hda_codec_realtek 278027 1
snd_hda_intel 26140 3
snd_hda_codec 72699 2 snd_hda_codec_realtek,snd_hda_intel
nouveau 512637 2
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68104 3 snd_hda_intel,snd_hda_codec
snd_seq 45208 0
snd_timer 22581 3 snd_pcm,snd_seq
snd_seq_device 13137 1 snd_seq
snd 52823 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
ohci_hcd 26576 0
sg 25985 0
sp5100_tco 12900 0
i2c_piix4 12536 0
ttm 52979 1 nouveau
drm_kms_helper 27216 1 nouveau
drm 163231 4 nouveau,ttm,drm_kms_helper
edac_core 35343 0
ehci_hcd 40090 0
sr_mod 21811 0
edac_mce_amd 17103 0
usbcore 124242 4 usbhid,ohci_hcd,ehci_hcd
r8169 42411 0
ata_generic 12479 0
i2c_algo_bit 12850 1 nouveau
i2c_core 23909 5 nouveau,i2c_piix4,drm_kms_helper,drm,i2c_algo_bit
soundcore 13152 1 snd
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
mxm_wmi 12473 1 nouveau
wmi 13243 1 mxm_wmi
mii 12675 1 r8169
video 17707 1 nouveau
k8temp 12531 0
cdrom 35093 1 sr_mod
pata_atiixp 12697 0
floppy 53265 0
parport_pc 22395 1
processor 27942 1 powernow_k8
evdev 17558 7
parport 31929 3 ppdev,lp,parport_pc
button 12930 1 nouveau
psmouse 55656 0
serio_raw 12846 0
ext4 313917 2
mbcache 13066 1 ext4
jbd2 62574 1 ext4
crc16 12343 1 ext4
dm_mod 63164 0
sd_mod 36259 4
crc_t10dif 12348 1 sd_mod
ahci 25089 3
libahci 22767 1 ahci
libata 149043 4 ata_generic,pata_atiixp,ahci,libahci
fan 12674 0
thermal 17426 0
thermal_sys 17949 4 video,processor,fan,thermal
scsi_mod 162442 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8349]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:065b] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:236d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
Expansion ROM at fbf80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fddff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii extlinux 2:4.04+dfsg-3 collection of boot loaders (ext2/3
ii grub-pc 1.99-11 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.33 Binary firmware for various driver
ii firmware-linux-nonfree 0.33 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
* linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
Reply to: