Your message dated Sat, 17 Jul 2010 14:23:29 +0100 with message-id <1279373009.4883.40.camel@localhost> and subject line Re: Bug#589399: linux-image-2.6.32-5-686: Please Enable KMS for i915 chipsets has caused the Debian Bug report #589399, regarding linux-image-2.6.32-5-686: Please Enable KMS for i915 chipsets to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 589399: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=589399 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: Please Enable KMS for i915 chipsets
- From: Millot Mathieu <mathieu.millot@gmail.com>
- Date: Sat, 17 Jul 2010 13:46:38 +0200
- Message-id: <[🔎] 20100717114638.3534.27294.reportbug@thana-portable>
Package: linux-2.6 Version: 2.6.32-17 Severity: normal xserver-xorg-video-intel > 2.9.1 can't be tested with debian kernels (i've tried 2.6.34 and 2.6.35-rc5 from experimental) Version 2.12 work with sidux kernel which have KMS enabled for i915. My Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-amd64 i686 Debian Current Operating System: Linux thana-portable 2.6.32-5-686 #1 SMP Sun Jul 11 02:12:03 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8515365c-124e-4e18-ad10-e5df0c80e4b2 ro quiet init=/sbin/bootchartd splash Build Date: 15 July 2010 04:10:53PM xorg-server 2:1.7.7-3 (Cyril Brulebois <kibi@debian.org>) Current version of pixman: 0.18.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 17 13:32:07 2010 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81eaca0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2592:1025:008f Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2792:1025:008f Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x44c00000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.12.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) intel(0): No kernel modesetting driver detected. (II) UnloadModule: "intel" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-17) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun Jul 11 02:12:03 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8515365c-124e-4e18-ad10-e5df0c80e4b2 ro quiet init=/sbin/bootchartd splash ** Not tainted ** Kernel log: [ 2.982889] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.982894] EXT4-fs (sda1): write access will be enabled during recovery [ 8.820356] EXT4-fs (sda1): orphan cleanup on readonly fs [ 8.820366] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3763 [ 8.820461] EXT4-fs (sda1): 1 orphan inode deleted [ 8.820465] EXT4-fs (sda1): recovery complete [ 9.006885] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 13.708756] udev: starting version 160 [ 14.576888] ACPI: AC Adapter [ACAD] (on-line) [ 14.595653] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 14.596315] Marking TSC unstable due to TSC halts in idle [ 14.598447] processor LNXCPU:00: registered as cooling_device0 [ 14.611953] Switching to clocksource hpet [ 14.925802] name_count maxed, losing inode data: dev=00:05, inode=3558 [ 14.925874] name_count maxed, losing inode data: dev=00:05, inode=1474 [ 14.925880] name_count maxed, losing inode data: dev=00:05, inode=1474 [ 14.925942] name_count maxed, losing inode data: dev=00:05, inode=1474 [ 14.925947] name_count maxed, losing inode data: dev=00:05, inode=1474 [ 14.987334] ACPI: WMI: Mapper loaded [ 15.306308] lib80211: common routines for IEEE802.11 drivers [ 15.306312] lib80211_crypt: registered algorithm 'NULL' [ 15.330713] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000/0x0 [ 15.368848] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 15.432451] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 15.432457] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef] [ 15.432576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.488176] ACPI Warning for \_SB_.BAT1._BST: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012) [ 15.684195] ACPI: Battery Slot [BAT1] (battery present) [ 15.801466] intel_rng: FWH not detected [ 15.826019] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 15.826023] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 16.460659] yenta_cardbus 0000:06:01.0: CardBus bridge found [1025:008f] [ 16.460681] yenta_cardbus 0000:06:01.0: Enabling burst memory read transactions [ 16.460688] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI [ 16.460691] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI [ 16.460697] yenta_cardbus 0000:06:01.0: TI: mfunc 0x01111112, devctl 0x66 [ 16.460724] acer-wmi: Acer Laptop ACPI-WMI Extras [ 16.460741] acer-wmi: No or unsupported WMI interface, unable to load [ 16.460861] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 16.460864] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 16.692939] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0cf8, PCI irq 18 [ 16.692944] yenta_cardbus 0000:06:01.0: Socket status: 30000006 [ 16.692949] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #08 [ 16.692960] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 16.692965] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. [ 16.693215] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff [ 16.693219] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 16.693873] ipw2200 0000:06:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 16.695234] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 16.695286] ipw2200 0000:06:04.0: firmware: requesting ipw2200-bss.fw [ 17.422987] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 18.088690] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.088722] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.308543] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.310304] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 18.311069] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.311706] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.313225] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.580834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 28.519561] Adding 996020k swap on /dev/sda3. Priority:-1 extents:1 across:996020k [ 29.057381] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.058007] name_count maxed, losing inode data: dev=00:07, inode=8 [ 29.058011] name_count maxed, losing inode data: dev=00:07, inode=5198 [ 29.058023] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.058028] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.058697] name_count maxed, losing inode data: dev=00:07, inode=8 [ 29.058701] name_count maxed, losing inode data: dev=00:07, inode=5203 [ 29.058718] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.058723] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.059354] name_count maxed, losing inode data: dev=00:07, inode=8 [ 29.059358] name_count maxed, losing inode data: dev=00:07, inode=5208 [ 29.059370] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.059376] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.060054] name_count maxed, losing inode data: dev=00:07, inode=8 [ 29.060058] name_count maxed, losing inode data: dev=00:07, inode=5213 [ 29.060070] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.060076] name_count maxed, losing inode data: dev=00:05, inode=4 [ 29.060724] name_count maxed, losing inode data: dev=00:07, inode=8 [ 29.060728] name_count maxed, losing inode data: dev=00:07, inode=5218 [ 29.060734] loop: module loaded [ 36.983901] kjournald starting. Commit interval 5 seconds [ 36.984263] EXT3 FS on sda2, internal journal [ 36.984268] EXT3-fs: mounted filesystem with ordered data mode. [ 37.134974] kjournald starting. Commit interval 5 seconds [ 37.135354] EXT3 FS on sda4, internal journal [ 37.135359] EXT3-fs: mounted filesystem with ordered data mode. [ 38.176602] fuse init (API version 7.13) [ 38.570824] lp: driver loaded but no devices found [ 38.592829] ppdev: user-space parallel port driver [ 38.853700] eth0: link down [ 38.854356] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.325645] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11 [ 41.023855] eth0: link down [ 41.024169] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.142748] Program wdm tried to access /dev/mem between 100000->102000. [ 46.445744] eth0: link down [ 46.446272] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 51.610592] type=1305 audit(1279366337.993:40783): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 51.987753] lib80211_crypt: registered algorithm 'CCMP' [ 52.362963] padlock: VIA PadLock not detected. ** Model information not available ** Loaded modules: Module Size Used by aes_i586 6816 2 aes_generic 25738 1 aes_i586 lib80211_crypt_ccmp 3643 2 acpi_cpufreq 4943 0 cpufreq_stats 1940 0 cpufreq_conservative 4018 1 cpufreq_userspace 1480 0 parport_pc 15799 0 ppdev 4058 0 lp 5570 0 parport 22554 3 parport_pc,ppdev,lp cpufreq_powersave 602 0 uinput 4796 1 fuse 43758 1 ext3 94204 2 jbd 32169 1 ext3 loop 9757 0 snd_hda_codec_realtek 163226 1 snd_hda_intel 16787 0 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec snd_pcm 47214 2 snd_hda_intel,snd_hda_codec pcmcia 17442 0 snd_seq 35463 0 snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 1 snd_seq yenta_socket 16403 1 ipw2200 108368 0 rsrc_nonstatic 7057 1 yenta_socket snd 34363 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device rfkill 10264 0 libipw 18439 1 ipw2200 led_class 1757 0 soundcore 3450 1 snd i2c_i801 6462 0 joydev 6771 0 rng_core 2178 0 snd_page_alloc 5045 2 snd_hda_intel,snd_pcm lib80211 2870 3 lib80211_crypt_ccmp,ipw2200,libipw pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic serio_raw 2916 0 wmi 3575 0 battery 3782 0 evdev 5609 16 psmouse 44657 0 pcspkr 1207 0 processor 26599 2 acpi_cpufreq ac 1640 0 ext4 254973 1 mbcache 3762 2 ext3,ext4 jbd2 56091 1 ext4 crc16 1027 1 ext4 sg 15968 0 usbhid 27980 0 hid 50645 1 usbhid sr_mod 10770 0 sd_mod 25869 5 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod i915 220208 0 drm_kms_helper 18305 1 i915 ata_generic 2019 0 drm 112020 2 i915,drm_kms_helper i2c_algo_bit 3497 1 i915 uhci_hcd 16057 0 ata_piix 17640 5 8139too 14949 0 i2c_core 12696 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit libata 115721 2 ata_generic,ata_piix thermal 9206 0 8139cp 13421 0 mii 2714 2 8139too,8139cp video 14605 1 i915 ehci_hcd 27851 0 scsi_mod 101401 4 sg,sr_mod,sd_mod,libata thermal_sys 9378 3 processor,thermal,video output 1204 1 video usbcore 98402 4 usbhid,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore button 3598 1 i915 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 44c00000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d000c000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 44000000-441fffff Prefetchable memory behind bridge: 0000000044200000-00000000443fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 44400000-445fffff Prefetchable memory behind bridge: 0000000044600000-00000000447fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 44800000-449fffff Prefetchable memory behind bridge: 0000000044a00000-0000000044bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=08, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18e0 [size=32] 06:01.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56] Subsystem: Acer Incorporated [ALI] Device [1025:008f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=08, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2701] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 06:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:ff31] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at b0102000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c521 Logitech, Inc. Cordless Mouse Receiver Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (900, 'unstable'), (800, 'testing'), (500, 'experimental'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs ii linux-base 2.6.32-17 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-lin 2.6.35~rc5-1~experimental.1 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.26 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
- To: 589399-done@bugs.debian.org
- Subject: Re: Bug#589399: linux-image-2.6.32-5-686: Please Enable KMS for i915 chipsets
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sat, 17 Jul 2010 14:23:29 +0100
- Message-id: <1279373009.4883.40.camel@localhost>
- In-reply-to: <[🔎] 20100717114638.3534.27294.reportbug@thana-portable>
- References: <[🔎] 20100717114638.3534.27294.reportbug@thana-portable>
On Sat, 2010-07-17 at 13:46 +0200, Millot Mathieu wrote: > Package: linux-2.6 > Version: 2.6.32-17 > Severity: normal > > > xserver-xorg-video-intel > 2.9.1 can't be tested with debian kernels > (i've tried 2.6.34 and 2.6.35-rc5 from experimental) It is automatically enabled when you install the Debian package of xserver-xorg-video-intel. No bug here. $ cat /etc/modprobe.d/i915-kms.conf options i915 modeset=1 $ dpkg -S /etc/modprobe.d/i915-kms.conf xserver-xorg-video-intel: /etc/modprobe.d/i915-kms.conf Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---