Bug#607356: linux-image-2.6.32-5-686-bigmem: black screen after resume HP EliteBook 8440p
Package: linux-2.6
Version: 2.6.32-29
Severity: important
When using suspend in KDE on a HP EliteBook 8440p laptop, the screen
is almost black when resuming. This problem is not present in RHEL 6
and Ubuntu Maverik, but also found in Ubuntu Lucid.
I got the laptop available for testing for a few more days, so if
there is anything more information I can provide, please let me know.
The kernel log below is just after boot, and not after resume.
I found <URL: https://bugzilla.redhat.com/show_bug.cgi?id=598162 >
over at RH that seem similar but is using a different video driver
(mine uses intel).
<URL: https://bugzilla.redhat.com/show_bug.cgi?id=597141 > got another
display related bug for the same model.
For Ubuntu, I found
<URL: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/570604 >,
which might be related.
After hibernate, the machine did not come up at all. Not sure if this
is the same bug or if I should report it as a separate bug.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 16:59:53 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686-bigmem root=/dev/mapper/vg_system-root ro quiet
** Not tainted
** Kernel log:
[ 28.265835] name_count maxed, losing inode data: dev=00:07, inode=8
[ 28.265839] name_count maxed, losing inode data: dev=00:07, inode=4849
[ 28.265842] loop: module loaded
[ 28.428395] Adding 5935096k swap on /dev/mapper/vg_system-swap_1. Priority:-1 extents:1 across:5935096k
[ 33.509329] kjournald starting. Commit interval 5 seconds
[ 33.509725] EXT3 FS on sda1, internal journal
[ 33.509732] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.511677] kjournald starting. Commit interval 5 seconds
[ 33.512124] EXT3 FS on dm-2, internal journal
[ 33.512130] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.208106] fuse init (API version 7.13)
[ 35.859886] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 36.866010] apm: BIOS not found.
[ 37.885284] Bluetooth: L2CAP ver 2.14
[ 37.885288] Bluetooth: L2CAP socket layer initialized
[ 37.929099] Bluetooth: RFCOMM TTY layer initialized
[ 37.929106] Bluetooth: RFCOMM socket layer initialized
[ 37.929110] Bluetooth: RFCOMM ver 1.11
[ 38.024787] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.024792] Bluetooth: BNEP filters: protocol multicast
[ 38.181512] Bridge firewalling registered
[ 38.575978] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.575983] Bluetooth: SCO socket layer initialized
[ 39.884638] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 39.940147] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 39.940604] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.943661] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-4.ucode
[ 39.977784] iwlagn 0000:43:00.0: iwlwifi-6000-4.ucode firmware file req failed: -2
[ 39.981455] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-3.ucode
[ 39.984385] iwlagn 0000:43:00.0: iwlwifi-6000-3.ucode firmware file req failed: -2
[ 39.987684] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-2.ucode
[ 39.990604] iwlagn 0000:43:00.0: iwlwifi-6000-2.ucode firmware file req failed: -2
[ 39.994163] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-1.ucode
[ 39.997131] iwlagn 0000:43:00.0: iwlwifi-6000-1.ucode firmware file req failed: -2
[ 40.000545] iwlagn 0000:43:00.0: Could not read microcode: -2
[ 40.261576] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-4.ucode
[ 40.263237] iwlagn 0000:43:00.0: iwlwifi-6000-4.ucode firmware file req failed: -2
[ 40.264873] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-3.ucode
[ 40.266792] iwlagn 0000:43:00.0: iwlwifi-6000-3.ucode firmware file req failed: -2
[ 40.268598] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-2.ucode
[ 40.270363] iwlagn 0000:43:00.0: iwlwifi-6000-2.ucode firmware file req failed: -2
[ 40.272043] iwlagn 0000:43:00.0: firmware: requesting iwlwifi-6000-1.ucode
[ 40.274418] iwlagn 0000:43:00.0: iwlwifi-6000-1.ucode firmware file req failed: -2
[ 40.276152] iwlagn 0000:43:00.0: Could not read microcode: -2
[ 42.976088] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 42.977914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.519196] lp0: using parport0 (interrupt-driven).
[ 47.555109] ppdev: user-space parallel port driver
[ 53.041726] eth0: no IPv6 routers present
[ 59.390745] type=1305 audit(1292580497.690:30637): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 59.390754] type=1305 audit(1292580497.690:30638): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[ 72.806339] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 72.996660] CPU0 attaching NULL sched-domain.
[ 72.996666] CPU1 attaching NULL sched-domain.
[ 72.996670] CPU2 attaching NULL sched-domain.
[ 72.996673] CPU3 attaching NULL sched-domain.
[ 73.023623] CPU0 attaching sched-domain:
[ 73.023627] domain 0: span 0-1 level SIBLING
[ 73.023631] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 73.023638] domain 1: span 0-3 level MC
[ 73.023641] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 73.023649] CPU1 attaching sched-domain:
[ 73.023652] domain 0: span 0-1 level SIBLING
[ 73.023655] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 73.023661] domain 1: span 0-3 level MC
[ 73.023664] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 73.023670] CPU2 attaching sched-domain:
[ 73.023673] domain 0: span 2-3 level SIBLING
[ 73.023676] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 73.023682] domain 1: span 0-3 level MC
[ 73.023685] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 73.023691] CPU3 attaching sched-domain:
[ 73.023694] domain 0: span 2-3 level SIBLING
[ 73.023697] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 73.023703] domain 1: span 0-3 level MC
[ 73.023706] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 73.024265] CPU0 attaching NULL sched-domain.
[ 73.024269] CPU1 attaching NULL sched-domain.
[ 73.024271] CPU2 attaching NULL sched-domain.
[ 73.024274] CPU3 attaching NULL sched-domain.
[ 73.075450] CPU0 attaching sched-domain:
[ 73.075454] domain 0: span 0-1 level SIBLING
[ 73.075457] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 73.075464] domain 1: span 0-3 level MC
[ 73.075467] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 73.075475] CPU1 attaching sched-domain:
[ 73.075478] domain 0: span 0-1 level SIBLING
[ 73.075480] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 73.075487] domain 1: span 0-3 level MC
[ 73.075490] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 73.075496] CPU2 attaching sched-domain:
[ 73.075499] domain 0: span 2-3 level SIBLING
[ 73.075502] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 73.075508] domain 1: span 0-3 level MC
[ 73.075511] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 73.075517] CPU3 attaching sched-domain:
[ 73.075520] domain 0: span 2-3 level SIBLING
[ 73.075523] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 73.075529] domain 1: span 0-3 level MC
[ 73.075532] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
** Model information
not available
** Loaded modules:
Module Size Used by
autofs4 16667 1
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25171 10
l2cap 21705 16 bnep,rfcomm
crc16 1027 1 l2cap
acpi_cpufreq 4951 1
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
binfmt_misc 4907 1
uinput 4796 1
fuse 43941 1
loop 9765 0
firewire_sbp2 9760 0
snd_hda_codec_intelhdmi 9027 1
snd_hda_codec_idt 35293 1
ide_cs 6228 1
ide_core 59686 1 ide_cs
snd_hda_intel 16871 2
snd_hda_codec 46002 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
joydev 6739 0
snd_pcm 47386 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
pcmcia 16286 1 ide_cs
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
arc4 974 2
ecb 1405 2
btusb 8081 2
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo 45542 0
bluetooth 36319 9 sco,bnep,rfcomm,l2cap,btusb
videodev 25545 1 uvcvideo
v4l1_compat 10250 2 uvcvideo,videodev
parport_pc 15871 1
parport 22554 3 ppdev,lp,parport_pc
evdev 5609 22
psmouse 44657 0
snd 34375 16 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 2916 0
iwlagn 63643 0
i915 222608 2
iwlcore 67710 1 iwlagn
drm_kms_helper 18309 1 i915
yenta_socket 16511 3
drm 112712 3 i915,drm_kms_helper
hp_accel 10108 0
tpm_infineon 6203 0
mac80211 123574 2 iwlagn,iwlcore
lis3lv02d 3993 1 hp_accel
tpm 8137 1 tpm_infineon
rsrc_nonstatic 7413 1 yenta_socket
i2c_algo_bit 3497 1 i915
cfg80211 87657 3 iwlagn,iwlcore,mac80211
container 1833 0
tpm_bios 3569 1 tpm
i2c_core 12696 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
pcmcia_core 20482 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 1207 0
wmi 3575 0
ac 1640 0
input_polldev 1479 1 lis3lv02d
rfkill 10264 3 bluetooth,cfg80211
battery 3782 0
button 3598 1 i915
video 14605 1 i915
output 1204 1 video
soundcore 3450 1 snd
snd_page_alloc 5113 2 snd_hda_intel,snd_pcm
processor 26335 5 acpi_cpufreq
ext3 94204 3
jbd 32169 1 ext3
mbcache 3762 1 ext3
dm_mod 46082 9
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25969 3
crc_t10dif 1012 1 sd_mod
ahci 27286 2
sdhci_pci 4541 0
libata 116061 1 ahci
ehci_hcd 28263 0
sdhci 12319 1 sdhci_pci
scsi_mod 101425 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ricoh_mmc 2561 0
mmc_core 38677 1 sdhci
led_class 1757 3 iwlcore,hp_accel,sdhci
firewire_ohci 17009 0
firewire_core 31283 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
usbcore 98801 4 btusb,uvcvideo,ehci_hcd
nls_base 4541 1 usbcore
e1000e 98213 0
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4724000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d472a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4729000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d4600000-d46fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=42, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d0600000-d45fffff
Prefetchable memory behind bridge: 00000000d4900000-00000000d4afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=43, subordinate=43, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4728000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=44, subordinate=48, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000bc000000-00000000bfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at 5048 [size=8]
Region 1: I/O ports at 505c [size=4]
Region 2: I/O ports at 5040 [size=8]
Region 3: I/O ports at 5058 [size=4]
Region 4: I/O ports at 5000 [size=32]
Region 5: Memory at d4727000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d4726000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
43:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35)
Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
44:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 06) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
44:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 25)
Subsystem: Hewlett-Packard Company Device [103c:172a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0403000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
44:06.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev bb)
!!! Invalid class 0880 for header type 02
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0402000 (32-bit, non-prefetchable) [size=256]
Bus: primary=44, secondary=45, subordinate=48, sec-latency=176
Memory window 0: bc000000-bffff000 (prefetchable)
Memory window 1: d8000000-dbfff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite-
<access denied to the rest>
Kernel driver in use: ricoh-mmc
44:06.3 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: yenta_cardbus
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b15e Chicony Electronics Co., Ltd
Bus 001 Device 003: ID 03f0:231d Hewlett-Packard
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=nb_NO.UTF-8, LC_CTYPE=nb_NO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-29 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686-bigmem recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-7 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686-bigmem suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686-bigmem/postinst/missing-firmware-2.6.32-5-686-bigmem:
linux-image-2.6.32-5-686-bigmem/postinst/depmod-error-initrd-2.6.32-5-686-bigmem: false
linux-image-2.6.32-5-686-bigmem/prerm/removing-running-kernel-2.6.32-5-686-bigmem: true
linux-image-2.6.32-5-686-bigmem/postinst/ignoring-do-bootloader-2.6.32-5-686-bigmem:
Reply to: