Your message dated Tue, 14 Dec 2010 04:31:23 +0000 with message-id <1292301083.3136.512.camel@localhost> and subject line Re: linux-image-2.6.34-1-amd64: fix to qcserial to allow uploading of firmware has caused the Debian Bug report #586913, regarding linux-image-2.6.34-1-amd64: fix to qcserial to allow uploading of firmware to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 586913: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=586913 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.34-1-amd64: fix to qcserial to allow uploading of firmware
- From: Alex Samad <alex@samad.com.au>
- Date: Wed, 23 Jun 2010 22:44:03 +1000
- Message-id: <20100623124403.18642.91841.reportbug@max.hme1.samad.com.au.>
Package: linux-2.6 Version: 2.6.34-1~experimental.2 Severity: normal Tags: patch Hi there is a problem with qcserial since ... 2.6.32 I think - there is currently a regression bug. Seems like there was a change in the fifo the new method doesn't handle frmware uploads well.... There is a patch for qcserial and options modules to use a shared wwan module http://thread.gmane.org/gmane.linux.usb.general/29707 here is a link for the patchs is it possible to add it to the 2.6.34 build Alex -- Package-specific info: ** Version: Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 22:29:25 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.34-1-amd64 root=UUID=f0b97f9e-1483-4764-bd56-d321a42de30b ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-MA790FXT-UD5P product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F8d board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-MA790FXT-UD5P board_version: ** Loaded modules: Module Size Used by usb_storage 39287 0 dm_snapshot 24818 3 nvidia 10646620 38 sha256_generic 9397 4 aes_x86_64 7380 4 aes_generic 26090 1 aes_x86_64 cbc 2595 2 ppdev 5507 0 lp 8190 0 parport 25598 2 ppdev,lp vboxnetadp 4241 0 vboxnetflt 12150 0 vboxdrv 1721742 6 vboxnetadp,vboxnetflt powernow_k8 11056 0 cpufreq_powersave 926 0 cpufreq_conservative 7886 0 cpufreq_stats 2649 0 cpufreq_userspace 2016 0 binfmt_misc 6558 1 nfsd 253519 21 exportfs 3178 1 nfsd nfs 240208 0 lockd 58476 2 nfsd,nfs fscache 29486 1 nfs nfs_acl 2039 2 nfsd,nfs auth_rpcgss 33596 2 nfsd,nfs sunrpc 161819 16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss bridge 53994 0 stp 1464 1 bridge ip6table_mangle 1508 1 ip6t_frag 1222 3 ip6t_LOG 4450 3 ip6t_REJECT 2593 3 nf_conntrack_ipv6 10579 55 ip6table_filter 1332 1 ip6_tables 15403 4 ip6table_mangle,ip6t_frag,ip6t_LOG,ip6table_filter iptable_mangle 1456 1 iptable_nat 3683 1 nf_nat 13757 1 iptable_nat xt_pkttype 1011 4 ipt_ULOG 7097 4 ipt_REJECT 1977 4 xt_limit 1790 27 xt_tcpudp 2327 142 nf_conntrack_ipv4 9745 76 iptable_nat,nf_nat nf_defrag_ipv4 1211 1 nf_conntrack_ipv4 xt_state 1311 128 nf_conntrack 47409 5 nf_conntrack_ipv6,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state iptable_filter 1376 1 ip_tables 14274 3 iptable_mangle,iptable_nat,iptable_filter x_tables 13519 16 ip6table_mangle,ip6t_frag,ip6t_LOG,ip6t_REJECT,ip6table_filter,ip6_tables,iptable_mangle,iptable_nat,xt_pkttype,ipt_ULOG,ipt_REJECT,xt_limit,xt_tcpudp,xt_state,iptable_filter,ip_tables ext4 275079 19 jbd2 62413 1 ext4 crc16 1311 1 ext4 ext2 53699 2 tun 12166 2 firewire_sbp2 11407 0 loop 12330 0 dm_crypt 10543 2 joydev 8920 0 hid_logitech 7579 0 ff_memless 3892 1 hid_logitech uvcvideo 50068 1 videodev 31390 2 uvcvideo v4l1_compat 11590 2 uvcvideo,videodev v4l2_compat_ioctl32 9320 1 videodev snd_usb_audio 67950 0 edac_core 29301 0 edac_mce_amd 6497 0 snd_hda_codec_realtek 250812 1 evdev 7426 14 snd_hda_intel 19530 0 snd_usb_lib 14819 1 snd_usb_audio snd_hda_codec 64924 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 4454 0 snd_seq_midi_event 4738 1 snd_seq_midi snd_hwdep 5468 2 snd_usb_audio,snd_hda_codec snd_rawmidi 15945 2 snd_usb_lib,snd_seq_midi snd_pcm 61665 3 snd_usb_audio,snd_hda_intel,snd_hda_codec snd_seq 42806 2 snd_seq_midi,snd_seq_midi_event snd_timer 16304 2 snd_pcm,snd_seq snd_seq_device 4515 3 snd_seq_midi,snd_rawmidi,snd_seq k10temp 2707 0 snd 46979 11 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_usb_lib,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6289 2 snd_hda_intel,snd_pcm pcspkr 1723 0 soundcore 4838 1 snd usbhid 33354 2 hid_logitech hid 63831 2 hid_logitech,usbhid i2c_piix4 8336 0 i2c_core 16076 3 nvidia,videodev,i2c_piix4 serio_raw 3726 0 tpm_tis 7349 0 tpm 9843 1 tpm_tis tpm_bios 4629 1 tpm wmi 5443 0 processor 29010 1 powernow_k8 button 4706 0 ext3 106594 13 jbd 37179 1 ext3 mbcache 5152 3 ext4,ext2,ext3 dm_mod 55429 111 dm_snapshot,dm_crypt raid1 18535 2 md_mod 77204 3 raid1 fuse 50697 11 sg 19141 0 sr_mod 12711 0 cdrom 29769 1 sr_mod sd_mod 30469 10 crc_t10dif 1284 1 sd_mod ata_generic 2895 0 firewire_ohci 18688 0 ohci_hcd 18693 0 pata_jmicron 2304 0 e1000 85029 0 firewire_core 38607 2 firewire_sbp2,firewire_ohci pata_atiixp 3617 0 crc_itu_t 1315 1 firewire_core ahci 34034 2 thermal 12046 0 ehci_hcd 30813 0 thermal_sys 12036 2 processor,thermal aacraid 61660 6 usbcore 125665 9 usb_storage,uvcvideo,snd_usb_audio,snd_usb_lib,usbhid,ohci_hcd,ehci_hcd nls_base 6369 1 usbcore libata 133830 4 ata_generic,pata_jmicron,pata_atiixp,ahci scsi_mod 125191 7 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,aacraid,libata r8169 29451 0 mii 3250 1 r8169 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx1 port A) [1002:5980] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd200000-fd5fffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology Device [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: fd800000-fd8fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:34d0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at af00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fd7ff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fd7e0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fd700000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fde00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at cf00 [size=8] Region 1: I/O ports at ce00 [size=4] Region 2: I/O ports at cd00 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at cb00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09) Subsystem: Adaptec 51645 [9005:02cf] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at fd200000 (64-bit, non-prefetchable) [size=2M] [virtual] Expansion ROM at fdb00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: aacraid 06:06.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fd9c0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fd940000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 9f00 [size=64] [virtual] Expansion ROM at fd800000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000 06:06.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fd9a0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 9e00 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fd9ff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fd9f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 091e:2271 Garmin International Edge 605/705 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable'), (100, 'unstable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_AU.UTF8, LC_CTYPE=en_AU.UTF8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.34-1-amd64 depends on: ii debconf [debconf 1.5.32 Debian configuration management sy ii initramfs-tools 0.94.4 tools for generating an initramfs ii linux-base 2.6.34-1~experimental.2 Linux image base package ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.34-1-amd64 recommends: ii firmware-linux-f 2.6.34-1~experimental.2 Binary firmware for various driver Versions of packages linux-image-2.6.34-1-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.34 <none> (no description available) Versions of packages linux-image-2.6.34-1-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: * linux-image-2.6.34-1-amd64/postinst/missing-firmware-2.6.34-1-amd64: linux-image-2.6.34-1-amd64/postinst/bootloader-error-2.6.34-1-amd64: shared/kernel-image/really-run-bootloader: true linux-image-2.6.34-1-amd64/prerm/would-invalidate-boot-loader-2.6.34-1-amd64: true linux-image-2.6.34-1-amd64/postinst/depmod-error-initrd-2.6.34-1-amd64: false linux-image-2.6.34-1-amd64/postinst/bootloader-test-error-2.6.34-1-amd64: linux-image-2.6.34-1-amd64/prerm/removing-running-kernel-2.6.34-1-amd64: true
--- End Message ---
--- Begin Message ---
- To: 586913-done@bugs.debian.org
- Subject: Re: linux-image-2.6.34-1-amd64: fix to qcserial to allow uploading of firmware
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 14 Dec 2010 04:31:23 +0000
- Message-id: <1292301083.3136.512.camel@localhost>
Version: 2.6.35~rc4-1~experimental.1 This was fixed in upstream version 2.6.35-rc1. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---