--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-25
Severity: normal
Tags: squeeze
This morning I upgraded the kernel to 2.6.32-5-amd64, since then I
encounter major problems while booting the system. Segmentation faults
occur in the kernel.
Sometimes I make it into the maintenance console and sometimes I even
make it into my X session.
I'm running squeeze and it's been somewhat more than a week ago since I
installed it, so the system is still relatively clean.
I already tried to disable the VirtualBox module but it does not help.
While running the system, things do not appear to run as they should be.
For instance, the chromium browser may end up in a zombie state, which I
haven't seen before.
>From the logs below, my hunch it's something SMP related.
>From dpkg.log I performed these updates this morning:
=====
2010-10-18 07:55:27 upgrade perl-modules 5.10.1-14 5.10.1-15
2010-10-18 07:55:29 upgrade perl 5.10.1-14 5.10.1-15
2010-10-18 07:55:31 upgrade libperl5.10 5.10.1-14 5.10.1-15
2010-10-18 07:55:33 upgrade perl-base 5.10.1-14 5.10.1-15
2010-10-18 07:55:36 upgrade linux-base 2.6.32-23 2.6.32-25
2010-10-18 07:55:39 upgrade linux-image-2.6.32-5-amd64 2.6.32-23 2.6.32-25
2010-10-18 07:55:44 upgrade openssh-server 1:5.5p1-5 1:5.5p1-5+b1
2010-10-18 07:55:46 upgrade openssh-client 1:5.5p1-5 1:5.5p1-5+b1
2010-10-18 07:55:47 upgrade cpp 4:4.4.4-2 4:4.4.5-1
2010-10-18 07:55:49 upgrade gcc 4:4.4.4-2 4:4.4.5-1
2010-10-18 07:55:50 upgrade g++ 4:4.4.4-2 4:4.4.5-1
2010-10-18 07:55:53 upgrade gfortran 4:4.4.4-2 4:4.4.5-1
2010-10-18 07:55:54 upgrade libgcj-common 1:4.4.4-2 1:4.4.5-1
2010-10-18 07:55:55 upgrade libgcj-bc 4.4.4-2 4.4.5-1
2010-10-18 07:55:57 upgrade linux-headers-2.6.32-5-amd64 2.6.32-23 2.6.32-25
2010-10-18 07:55:59 upgrade linux-headers-2.6.32-5-common 2.6.32-23 2.6.32-25
2010-10-18 07:56:02 upgrade linux-libc-dev 2.6.32-23 2.6.32-25
=====
When I made it into a recovery console I was able to capture this dmesg
output:
=====
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-25) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Oct 15 00:56:30 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/VolGroup00-lvolroot ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd126000 (usable)
[ 0.000000] BIOS-e820: 00000000cd126000 - 00000000cd376000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cd376000 - 00000000cf6bd000 (usable)
[ 0.000000] BIOS-e820: 00000000cf6bd000 - 00000000cf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6bf000 - 00000000cf718000 (usable)
[ 0.000000] BIOS-e820: 00000000cf718000 - 00000000cf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7bf000 - 00000000cf7e7000 (usable)
[ 0.000000] BIOS-e820: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
[ 0.000000] BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FE0000000 write-back
[ 0.000000] 5 base 1A0000000 mask FF0000000 write-back
[ 0.000000] 6 base 0FFFF0000 mask FFFFF0000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[ 0.000000] 0000000000 - 00cf800000 page 2M
[ 0.000000] kernel direct mapping tables up to cf800000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ b000-13000
[ 0.000000] RAMDISK: 37674000 - 37fef16a
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000cf7fe120 0006C (v01 INTEL DX58SO 00000D6B 01000013)
[ 0.000000] ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20090903/tbfadt-557)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 00000000cf7f8000 045D9 (v02 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000cf72b000 00040
[ 0.000000] ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000cf7ea000 070AC (v01 INTEL SSDT PM 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: DMAR 00000000cf7e7000 00140 (v01 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: WDTT 00000000cf7f2000 0020C (v02 INTEL DX58SO 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: ASPT 00000000cf7f3000 00034 (v04 INTEL PerfTune 00000D6B MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000004bfff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS ==> [0001000000 - 0001688414]
[ 0.000000] #3 [0037674000 - 0037fef16a] RAMDISK ==> [0037674000 - 0037fef16a]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [0001689000 - 000168915e] BRK ==> [0001689000 - 000168915e]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000e000] PGTABLE ==> [000000b000 - 000000e000]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880001800000-ffff880006dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x000cd126
[ 0.000000] 0: 0x000cd376 -> 0x000cf6bd
[ 0.000000] 0: 0x000cf6bf -> 0x000cf718
[ 0.000000] 0: 0x000cf7bf -> 0x000cf7e7
[ 0.000000] 0: 0x000cf7ff -> 0x000cf800
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1569918
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3821 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 830759 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cd126000 - 00000000cd376000
[ 0.000000] PM: Registered nosave memory: 00000000cf6bd000 - 00000000cf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000cf718000 - 00000000cf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000
[ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880007000000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1545620
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/VolGroup00-lvolroot ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800071fe000 - ffff88000b1fe000
[ 0.000000] software IO TLB at phys 0x71fe000 - 0xb1fe000
[ 0.000000] Memory: 6106884k/7077888k available (3076k kernel code, 798216k absent, 172788k reserved, 1894k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:536
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 3067.056 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.11 BogoMIPS (lpj=12268224)
[ 0.000014] Security Framework initialized
[ 0.000017] SELinux: Disabled at boot.
[ 0.000384] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001701] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002379] Mount-cache hash table entries: 256
[ 0.002466] Initializing cgroup subsys ns
[ 0.002468] Initializing cgroup subsys cpuacct
[ 0.002472] Initializing cgroup subsys devices
[ 0.002473] Initializing cgroup subsys freezer
[ 0.002475] Initializing cgroup subsys net_cls
[ 0.002488] CPU: Physical Processor ID: 0
[ 0.002489] CPU: Processor Core ID: 0
[ 0.002491] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002492] CPU: L2 cache: 256K
[ 0.002493] CPU: L3 cache: 8192K
[ 0.002495] CPU 0/0x0 -> Node 0
[ 0.002497] mce: CPU supports 9 MCE banks
[ 0.002505] CPU0: Thermal monitoring enabled (TM1)
[ 0.002507] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.002513] using mwait in idle threads.
[ 0.002514] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.002517] ... version: 3
[ 0.002518] ... bit width: 48
[ 0.002519] ... generic registers: 4
[ 0.002520] ... value mask: 0000ffffffffffff
[ 0.002521] ... max period: 000000007fffffff
[ 0.002522] ... fixed-purpose events: 3
[ 0.002523] ... event mask: 000000070000000f
[ 0.003118] ACPI: Core revision 20090903
[ 0.010827] DMAR: Host address width 39
[ 0.010829] DMAR: DRHD base: 0x000000fe711000 flags: 0x0
[ 0.010835] IOMMU fe711000: ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.010837] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.010842] IOMMU fe710000: ver 1:0 cap c90780106f0462 ecap f0207a
[ 0.010844] DMAR: RMRR base: 0x000000000e9000 end: 0x000000000e9fff
[ 0.010846] DMAR: RMRR base: 0x000000000ea000 end: 0x000000000eafff
[ 0.010847] DMAR: RMRR base: 0x000000000eb000 end: 0x000000000ebfff
[ 0.010849] DMAR: RMRR base: 0x000000000e6000 end: 0x000000000e6fff
[ 0.010851] DMAR: RMRR base: 0x000000000e7000 end: 0x000000000e7fff
[ 0.010853] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
[ 0.010854] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000eefff
[ 0.010856] DMAR: No ATSR found
[ 0.010861] IOAPIC id 8 under DRHD base 0xfe710000
[ 0.011126] Enabled Interrupt-remapping
[ 0.011130] Setting APIC routing to physical flat
[ 0.011132] alloc irq_desc for 24 on node 0
[ 0.011133] alloc kstat_irqs on node 0
[ 0.011145] alloc irq_desc for 25 on node 0
[ 0.011146] alloc kstat_irqs on node 0
[ 0.011302] alloc irq_2_iommu on node 0
[ 0.011307] alloc irq_2_iommu on node 0
[ 0.011312] alloc irq_2_iommu on node 0
[ 0.011317] alloc irq_2_iommu on node 0
[ 0.011321] alloc irq_2_iommu on node 0
[ 0.011326] alloc irq_2_iommu on node 0
[ 0.011330] alloc irq_2_iommu on node 0
[ 0.011335] alloc irq_2_iommu on node 0
[ 0.011339] alloc irq_2_iommu on node 0
[ 0.011344] alloc irq_2_iommu on node 0
[ 0.011348] alloc irq_2_iommu on node 0
[ 0.011353] alloc irq_2_iommu on node 0
[ 0.011357] alloc irq_2_iommu on node 0
[ 0.011362] alloc irq_2_iommu on node 0
[ 0.011366] alloc irq_2_iommu on node 0
[ 0.011504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051084] CPU0: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.156696] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.167165] Initializing CPU#1
[ 0.244385] CPU: Physical Processor ID: 0
[ 0.244386] CPU: Processor Core ID: 1
[ 0.244388] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.244389] CPU: L2 cache: 256K
[ 0.244390] CPU: L3 cache: 8192K
[ 0.244391] CPU 1/0x2 -> Node 0
[ 0.244400] CPU1: Thermal monitoring enabled (TM1)
[ 0.244402] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.244500] CPU1: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.244506] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.264514] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.274766] Initializing CPU#2
[ 0.352096] CPU: Physical Processor ID: 0
[ 0.352096] CPU: Processor Core ID: 2
[ 0.352098] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.352099] CPU: L2 cache: 256K
[ 0.352100] CPU: L3 cache: 8192K
[ 0.352102] CPU 2/0x4 -> Node 0
[ 0.352110] CPU2: Thermal monitoring enabled (TM1)
[ 0.352113] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.352217] CPU2: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.352222] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.372229] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.382481] Initializing CPU#3
[ 0.459806] CPU: Physical Processor ID: 0
[ 0.459807] CPU: Processor Core ID: 3
[ 0.459808] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.459809] CPU: L2 cache: 256K
[ 0.459810] CPU: L3 cache: 8192K
[ 0.459812] CPU 3/0x6 -> Node 0
[ 0.459820] CPU3: Thermal monitoring enabled (TM1)
[ 0.459823] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.459851] CPU3: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.459857] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.479866] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.490118] Initializing CPU#4
[ 0.567516] CPU: Physical Processor ID: 0
[ 0.567517] CPU: Processor Core ID: 0
[ 0.567519] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.567520] CPU: L2 cache: 256K
[ 0.567521] CPU: L3 cache: 8192K
[ 0.567523] CPU 4/0x1 -> Node 0
[ 0.567532] CPU4: Thermal monitoring enabled (TM1)
[ 0.567535] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.567578] CPU4: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.567584] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.587595] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.597847] Initializing CPU#5
[ 0.675226] CPU: Physical Processor ID: 0
[ 0.675227] CPU: Processor Core ID: 1
[ 0.675228] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.675229] CPU: L2 cache: 256K
[ 0.675230] CPU: L3 cache: 8192K
[ 0.675232] CPU 5/0x3 -> Node 0
[ 0.675240] CPU5: Thermal monitoring enabled (TM1)
[ 0.675242] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.675298] CPU5: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.675304] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.695316] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.705568] Initializing CPU#6
[ 0.782936] CPU: Physical Processor ID: 0
[ 0.782937] CPU: Processor Core ID: 2
[ 0.782938] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.782939] CPU: L2 cache: 256K
[ 0.782940] CPU: L3 cache: 8192K
[ 0.782942] CPU 6/0x5 -> Node 0
[ 0.782950] CPU6: Thermal monitoring enabled (TM1)
[ 0.782952] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.783019] CPU6: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.783024] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.803034] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.813286] Initializing CPU#7
[ 0.890646] CPU: Physical Processor ID: 0
[ 0.890647] CPU: Processor Core ID: 3
[ 0.890648] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.890649] CPU: L2 cache: 256K
[ 0.890650] CPU: L3 cache: 8192K
[ 0.890652] CPU 7/0x7 -> Node 0
[ 0.890660] CPU7: Thermal monitoring enabled (TM1)
[ 0.890662] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.890737] CPU7: Intel(R) Core(TM) i7 CPU @ 9500 @ 3.07GHz stepping 05
[ 0.890742] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.910706] Brought up 8 CPUs
[ 0.910708] Total of 8 processors activated (49069.93 BogoMIPS).
[ 0.913794] CPU0 attaching sched-domain:
[ 0.913796] domain 0: span 0,4 level SIBLING
[ 0.913798] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 0.913802] domain 1: span 0-7 level MC
[ 0.913803] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 0.913810] CPU1 attaching sched-domain:
[ 0.913811] domain 0: span 1,5 level SIBLING
[ 0.913812] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 0.913815] domain 1: span 0-7 level MC
[ 0.913816] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 0.913821] CPU2 attaching sched-domain:
[ 0.913823] domain 0: span 2,6 level SIBLING
[ 0.913824] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 0.913827] domain 1: span 0-7 level MC
[ 0.913828] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 0.913833] CPU3 attaching sched-domain:
[ 0.913834] domain 0: span 3,7 level SIBLING
[ 0.913836] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 0.913839] domain 1: span 0-7 level MC
[ 0.913840] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 0.913845] CPU4 attaching sched-domain:
[ 0.913846] domain 0: span 0,4 level SIBLING
[ 0.913847] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.913850] domain 1: span 0-7 level MC
[ 0.913852] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 0.913857] CPU5 attaching sched-domain:
[ 0.913858] domain 0: span 1,5 level SIBLING
[ 0.913859] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.913862] domain 1: span 0-7 level MC
[ 0.913863] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 0.913869] CPU6 attaching sched-domain:
[ 0.913870] domain 0: span 2,6 level SIBLING
[ 0.913871] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 0.913874] domain 1: span 0-7 level MC
[ 0.913875] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 0.913880] CPU7 attaching sched-domain:
[ 0.913882] domain 0: span 3,7 level SIBLING
[ 0.913883] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 0.913886] domain 1: span 0-7 level MC
[ 0.913887] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 0.914162] devtmpfs: initialized
[ 0.917326] regulator: core version 0.5
[ 0.917362] NET: Registered protocol family 16
[ 0.917420] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.917422] ACPI: bus type pci registered
[ 0.917476] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.917478] PCI: MCFG area at f8000000 reserved in E820
[ 0.919183] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.919184] PCI: Using configuration type 1 for base access
[ 0.919547] bio: create slab <bio-0> at 0
[ 0.920053] ACPI: EC: Look up EC in DSDT
[ 0.927946] ACPI: Interpreter enabled
[ 0.927948] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.927962] ACPI: Using IOAPIC for interrupt routing
[ 0.931157] ACPI: No dock devices found.
[ 0.931549] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.931652] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.931654] pci 0000:00:01.0: PME# disabled
[ 0.931710] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.931712] pci 0000:00:03.0: PME# disabled
[ 0.931768] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.931770] pci 0000:00:07.0: PME# disabled
[ 0.932024] pci 0000:00:19.0: reg 10 32bit mmio: [0xd0300000-0xd031ffff]
[ 0.932029] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0322000-0xd0322fff]
[ 0.932035] pci 0000:00:19.0: reg 18 io port: [0x30e0-0x30ff]
[ 0.932064] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.932067] pci 0000:00:19.0: PME# disabled
[ 0.932106] pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
[ 0.932163] pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
[ 0.932220] pci 0000:00:1a.2: reg 20 io port: [0x3080-0x309f]
[ 0.932275] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0321000-0xd03213ff]
[ 0.932319] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.932322] pci 0000:00:1a.7: PME# disabled
[ 0.932353] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
[ 0.932388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.932390] pci 0000:00:1b.0: PME# disabled
[ 0.932441] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.932444] pci 0000:00:1c.0: PME# disabled
[ 0.932495] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.932498] pci 0000:00:1c.1: PME# disabled
[ 0.932552] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.932555] pci 0000:00:1c.4: PME# disabled
[ 0.932601] pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f]
[ 0.932659] pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f]
[ 0.932716] pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f]
[ 0.932771] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0320000-0xd03203ff]
[ 0.932813] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.932817] pci 0000:00:1d.7: PME# disabled
[ 0.932922] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.932926] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.932930] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.932933] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.932936] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[ 0.932981] pci 0000:00:1f.2: reg 10 io port: [0x3158-0x315f]
[ 0.932985] pci 0000:00:1f.2: reg 14 io port: [0x316c-0x316f]
[ 0.932989] pci 0000:00:1f.2: reg 18 io port: [0x3150-0x3157]
[ 0.932994] pci 0000:00:1f.2: reg 1c io port: [0x3168-0x316b]
[ 0.932998] pci 0000:00:1f.2: reg 20 io port: [0x3130-0x313f]
[ 0.933002] pci 0000:00:1f.2: reg 24 io port: [0x3120-0x312f]
[ 0.933040] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0004000-0xf00040ff]
[ 0.933051] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.933087] pci 0000:00:1f.5: reg 10 io port: [0x3148-0x314f]
[ 0.933091] pci 0000:00:1f.5: reg 14 io port: [0x3164-0x3167]
[ 0.933095] pci 0000:00:1f.5: reg 18 io port: [0x3140-0x3147]
[ 0.933100] pci 0000:00:1f.5: reg 1c io port: [0x3160-0x3163]
[ 0.933104] pci 0000:00:1f.5: reg 20 io port: [0x3110-0x311f]
[ 0.933108] pci 0000:00:1f.5: reg 24 io port: [0x3100-0x310f]
[ 0.933177] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.933184] pci 0000:02:00.0: reg 18 64bit mmio: [0xd0200000-0xd020ffff]
[ 0.933188] pci 0000:02:00.0: reg 20 io port: [0x2000-0x20ff]
[ 0.933195] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.933211] pci 0000:02:00.0: supports D1 D2
[ 0.933238] pci 0000:02:00.1: reg 10 64bit mmio: [0xd0210000-0xd0213fff]
[ 0.933267] pci 0000:02:00.1: supports D1 D2
[ 0.933300] pci 0000:00:03.0: bridge io port: [0x2000-0x2fff]
[ 0.933302] pci 0000:00:03.0: bridge 32bit mmio: [0xd0200000-0xd02fffff]
[ 0.933306] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.933433] pci 0000:06:00.0: reg 10 io port: [0x1018-0x101f]
[ 0.933440] pci 0000:06:00.0: reg 14 io port: [0x1024-0x1027]
[ 0.933446] pci 0000:06:00.0: reg 18 io port: [0x1010-0x1017]
[ 0.933453] pci 0000:06:00.0: reg 1c io port: [0x1020-0x1023]
[ 0.933460] pci 0000:06:00.0: reg 20 io port: [0x1000-0x100f]
[ 0.933467] pci 0000:06:00.0: reg 24 32bit mmio: [0xd0100000-0xd01003ff]
[ 0.933503] pci 0000:06:00.0: supports D1
[ 0.933504] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.933508] pci 0000:06:00.0: PME# disabled
[ 0.933533] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.933559] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
[ 0.933561] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.933595] pci 0000:07:02.0: reg 10 32bit mmio: [0xd0000000-0xd0007fff]
[ 0.933668] pci 0000:07:03.0: reg 10 32bit mmio: [0xd000c000-0xd000c7ff]
[ 0.933674] pci 0000:07:03.0: reg 14 32bit mmio: [0xd0008000-0xd000bfff]
[ 0.933712] pci 0000:07:03.0: supports D1 D2
[ 0.933713] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.933716] pci 0000:07:03.0: PME# disabled
[ 0.933756] pci 0000:00:1e.0: transparent bridge
[ 0.933760] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xd00fffff]
[ 0.933786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.934203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.934317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.934364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 0.934409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
[ 0.934455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.934501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.934554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.940877] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.940953] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.941027] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.941100] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.941173] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.941248] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.941320] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.941394] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.941461] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.941464] vgaarb: loaded
[ 0.941499] PCI: Using ACPI for IRQ routing
[ 0.941710] hpet clockevent registered
[ 0.941713] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.941719] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.941721] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.950607] Switching to clocksource tsc
[ 0.951399] pnp: PnP ACPI init
[ 0.951404] ACPI: bus type pnp registered
[ 0.952518] pnp: PnP ACPI: found 8 devices
[ 0.952520] ACPI: ACPI bus type pnp unregistered
[ 0.952526] system 00:05: ioport range 0x500-0x53f has been reserved
[ 0.952528] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.952529] system 00:05: ioport range 0x680-0x6ff has been reserved
[ 0.957167] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.957249] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.957250] pci 0000:00:01.0: IO window: disabled
[ 0.957253] pci 0000:00:01.0: MEM window: disabled
[ 0.957256] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.957261] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.957263] pci 0000:00:03.0: IO window: 0x2000-0x2fff
[ 0.957266] pci 0000:00:03.0: MEM window: 0xd0200000-0xd02fffff
[ 0.957268] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.957272] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.957273] pci 0000:00:07.0: IO window: disabled
[ 0.957276] pci 0000:00:07.0: MEM window: disabled
[ 0.957278] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.957282] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.957283] pci 0000:00:1c.0: IO window: disabled
[ 0.957287] pci 0000:00:1c.0: MEM window: disabled
[ 0.957289] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.957294] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
[ 0.957295] pci 0000:00:1c.1: IO window: disabled
[ 0.957298] pci 0000:00:1c.1: MEM window: disabled
[ 0.957301] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.957305] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.957307] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.957311] pci 0000:00:1c.4: MEM window: 0xd0100000-0xd01fffff
[ 0.957313] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.957318] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.957319] pci 0000:00:1e.0: IO window: disabled
[ 0.957323] pci 0000:00:1e.0: MEM window: 0xd0000000-0xd00fffff
[ 0.957325] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.957334] alloc irq_desc for 16 on node -1
[ 0.957336] alloc kstat_irqs on node -1
[ 0.957338] alloc irq_2_iommu on node -1
[ 0.957342] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.957346] pci 0000:00:01.0: setting latency timer to 64
[ 0.957351] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.957353] pci 0000:00:03.0: setting latency timer to 64
[ 0.957358] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.957362] pci 0000:00:07.0: setting latency timer to 64
[ 0.957367] alloc irq_desc for 17 on node -1
[ 0.957368] alloc kstat_irqs on node -1
[ 0.957370] alloc irq_2_iommu on node -1
[ 0.957373] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.957377] pci 0000:00:1c.0: setting latency timer to 64
[ 0.957383] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.957386] pci 0000:00:1c.1: setting latency timer to 64
[ 0.957392] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.957395] pci 0000:00:1c.4: setting latency timer to 64
[ 0.957400] pci 0000:00:1e.0: setting latency timer to 64
[ 0.957402] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.957404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.957405] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.957407] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff]
[ 0.957408] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.957410] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
[ 0.957411] pci_bus 0000:06: resource 1 mem: [0xd0100000-0xd01fffff]
[ 0.957413] pci_bus 0000:07: resource 1 mem: [0xd0000000-0xd00fffff]
[ 0.957415] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.957416] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.957432] NET: Registered protocol family 2
[ 0.957576] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.958239] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.959549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.959751] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.959753] TCP reno registered
[ 0.959843] NET: Registered protocol family 1
[ 0.960179] pci 0000:02:00.0: Boot video device
[ 0.960211] Unpacking initramfs...
[ 1.105406] Freeing initrd memory: 9708k freed
[ 1.107099] audit: initializing netlink socket (disabled)
[ 1.107107] type=2000 audit(1287406582.899:1): initialized
[ 1.110400] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.111248] VFS: Disk quotas dquot_6.5.2
[ 1.111281] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.111330] msgmni has been set to 11946
[ 1.111495] alg: No test for stdrng (krng)
[ 1.111526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.111528] io scheduler noop registered
[ 1.111529] io scheduler anticipatory registered
[ 1.111530] io scheduler deadline registered
[ 1.111549] io scheduler cfq registered (default)
[ 1.111641] alloc irq_desc for 26 on node -1
[ 1.111642] alloc kstat_irqs on node -1
[ 1.111646] alloc irq_2_iommu on node -1
[ 1.111653] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 1.111658] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.111740] alloc irq_desc for 27 on node -1
[ 1.111741] alloc kstat_irqs on node -1
[ 1.111743] alloc irq_2_iommu on node -1
[ 1.111748] pcieport 0000:00:03.0: irq 27 for MSI/MSI-X
[ 1.111753] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.111831] alloc irq_desc for 28 on node -1
[ 1.111832] alloc kstat_irqs on node -1
[ 1.111834] alloc irq_2_iommu on node -1
[ 1.111839] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X
[ 1.111844] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.111920] alloc irq_desc for 29 on node -1
[ 1.111921] alloc kstat_irqs on node -1
[ 1.111923] alloc irq_2_iommu on node -1
[ 1.111929] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
[ 1.111935] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.112012] alloc irq_desc for 30 on node -1
[ 1.112013] alloc kstat_irqs on node -1
[ 1.112015] alloc irq_2_iommu on node -1
[ 1.112021] pcieport 0000:00:1c.1: irq 30 for MSI/MSI-X
[ 1.112026] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.112103] alloc irq_desc for 31 on node -1
[ 1.112104] alloc kstat_irqs on node -1
[ 1.112106] alloc irq_2_iommu on node -1
[ 1.112112] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
[ 1.112118] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.112310] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 1.112337] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 1.112361] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 1.113086] Linux agpgart interface v0.103
[ 1.113114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.113207] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.113364] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.113394] PNP: No PS/2 controller found. Probing ports directly.
[ 1.116453] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.116456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.116500] mice: PS/2 mouse device common for all mice
[ 1.116524] rtc_cmos 00:02: RTC can wake from S4
[ 1.116546] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.116568] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.116574] cpuidle: using governor ladder
[ 1.116575] cpuidle: using governor menu
[ 1.116578] No iBFT detected.
[ 1.116769] TCP cubic registered
[ 1.116835] NET: Registered protocol family 10
[ 1.117144] lo: Disabled Privacy Extensions
[ 1.117307] Mobile IPv6
[ 1.117308] NET: Registered protocol family 17
[ 1.117350] PM: Resume from disk failed.
[ 1.117354] registered taskstats version 1
[ 1.117788] rtc_cmos 00:02: setting system clock to 2010-10-18 12:56:23 UTC (1287406583)
[ 1.117814] Initalizing network drop monitor service
[ 1.117833] Freeing unused kernel memory: 584k freed
[ 1.117913] Write protecting the kernel read-only data: 4232k
[ 1.126024] udev: starting version 160
[ 1.136040] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.136043] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.136077] alloc irq_desc for 20 on node -1
[ 1.136079] alloc kstat_irqs on node -1
[ 1.136084] alloc irq_2_iommu on node -1
[ 1.136091] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.136099] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.136179] alloc irq_desc for 32 on node -1
[ 1.136181] alloc kstat_irqs on node -1
[ 1.136185] alloc irq_2_iommu on node -1
[ 1.136195] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 1.146910] usbcore: registered new interface driver usbfs
[ 1.146938] usbcore: registered new interface driver hub
[ 1.147058] usbcore: registered new device driver usb
[ 1.158730] SCSI subsystem initialized
[ 1.159807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.174147] libata version 3.00 loaded.
[ 1.176059] ahci 0000:06:00.0: version 3.0
[ 1.177423] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.179988] alloc irq_desc for 19 on node -1
[ 1.179990] alloc kstat_irqs on node -1
[ 1.179995] alloc irq_2_iommu on node -1
[ 1.180002] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.182376] pata_marvell 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.182397] pata_marvell 0000:06:00.0: setting latency timer to 64
[ 1.182451] scsi0 : pata_marvell
[ 1.182514] scsi1 : pata_marvell
[ 1.182549] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 16
[ 1.182551] ata2: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 16
[ 1.242056] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:a3:9a:f2
[ 1.242058] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.242080] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 1.242098] alloc irq_desc for 18 on node -1
[ 1.242100] alloc kstat_irqs on node -1
[ 1.242103] alloc irq_2_iommu on node -1
[ 1.242108] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.242126] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.242129] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.242145] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.242169] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.246037] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.246047] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0321000
[ 1.249682] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
[ 1.261649] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.261671] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.261673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.261675] usb usb1: Product: EHCI Host Controller
[ 1.261676] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.261677] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.261724] usb usb1: configuration #1 chosen from 1 choice
[ 1.261749] hub 1-0:1.0: USB hub found
[ 1.261755] hub 1-0:1.0: 6 ports detected
[ 1.261801] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.261806] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.261809] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.261815] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.261836] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[ 1.261860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.261862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.261863] usb usb2: Product: UHCI Host Controller
[ 1.261864] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.261865] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.261905] usb usb2: configuration #1 chosen from 1 choice
[ 1.261923] hub 2-0:1.0: USB hub found
[ 1.261927] hub 2-0:1.0: 2 ports detected
[ 1.261959] ata_piix 0000:00:1f.2: version 2.13
[ 1.261968] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.261971] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.261995] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.262025] scsi2 : ata_piix
[ 1.262058] scsi3 : ata_piix
[ 1.262150] ata3: SATA max UDMA/133 cmd 0x3158 ctl 0x316c bmdma 0x3130 irq 19
[ 1.262155] ata4: SATA max UDMA/133 cmd 0x3150 ctl 0x3168 bmdma 0x3138 irq 19
[ 1.262176] alloc irq_desc for 23 on node -1
[ 1.262178] alloc kstat_irqs on node -1
[ 1.262180] alloc irq_2_iommu on node -1
[ 1.262185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.262194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.262196] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.262202] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.262222] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.266094] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.266103] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0320000
[ 1.281595] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.281609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.281611] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281612] usb usb3: Product: EHCI Host Controller
[ 1.281614] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.281615] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.281660] usb usb3: configuration #1 chosen from 1 choice
[ 1.281683] hub 3-0:1.0: USB hub found
[ 1.281689] hub 3-0:1.0: 6 ports detected
[ 1.281733] alloc irq_desc for 21 on node -1
[ 1.281735] alloc kstat_irqs on node -1
[ 1.281737] alloc irq_2_iommu on node -1
[ 1.281742] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.281747] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.281749] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.281754] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.281785] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 1.281812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.281814] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281816] usb usb4: Product: UHCI Host Controller
[ 1.281817] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.281819] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.281854] usb usb4: configuration #1 chosen from 1 choice
[ 1.281873] hub 4-0:1.0: USB hub found
[ 1.281876] hub 4-0:1.0: 2 ports detected
[ 1.281913] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.281916] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.281939] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.281967] scsi4 : ata_piix
[ 1.282007] scsi5 : ata_piix
[ 1.282077] ata5: SATA max UDMA/133 cmd 0x3148 ctl 0x3164 bmdma 0x3110 irq 18
[ 1.282080] ata6: SATA max UDMA/133 cmd 0x3140 ctl 0x3160 bmdma 0x3118 irq 18
[ 1.282103] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.282109] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.282111] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.282117] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.282138] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00003080
[ 1.282158] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282160] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282161] usb usb5: Product: UHCI Host Controller
[ 1.282162] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.282164] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.282204] usb usb5: configuration #1 chosen from 1 choice
[ 1.282221] hub 5-0:1.0: USB hub found
[ 1.282225] hub 5-0:1.0: 2 ports detected
[ 1.282260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.282265] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.282267] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.282271] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.282292] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
[ 1.282313] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282314] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282315] usb usb6: Product: UHCI Host Controller
[ 1.282317] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.282318] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.282351] usb usb6: configuration #1 chosen from 1 choice
[ 1.282367] hub 6-0:1.0: USB hub found
[ 1.282370] hub 6-0:1.0: 2 ports detected
[ 1.282400] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.282404] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.282406] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.282410] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.282430] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
[ 1.282450] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282452] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282453] usb usb7: Product: UHCI Host Controller
[ 1.282454] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.282455] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.282486] usb usb7: configuration #1 chosen from 1 choice
[ 1.282503] hub 7-0:1.0: USB hub found
[ 1.282506] hub 7-0:1.0: 2 ports detected
[ 1.282535] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.282539] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.282542] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.282546] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.282566] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
[ 1.282585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282586] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282588] usb usb8: Product: UHCI Host Controller
[ 1.282589] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.282590] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.282622] usb usb8: configuration #1 chosen from 1 choice
[ 1.282637] hub 8-0:1.0: USB hub found
[ 1.282640] hub 8-0:1.0: 2 ports detected
[ 1.611627] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.622437] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.740503] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1.748368] firewire_core: created device fw0: GUID 0090270002481256, S400
[ 1.873653] usb 1-6: New USB device found, idVendor=05e3, idProduct=0605
[ 1.873654] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.873656] usb 1-6: Product: USB2.0 Hub
[ 1.873686] usb 1-6: configuration #1 chosen from 1 choice
[ 1.873925] hub 1-6:1.0: USB hub found
[ 1.874151] hub 1-6:1.0: 4 ports detected
[ 2.055868] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.055887] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.055889] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 2.055904] ata4.01: link offline, clearing class 3 to NONE
[ 2.055905] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.064065] ata4.00: ATAPI: Optiarc DVD RW AD-7240S, 1.01, max UDMA/100
[ 2.065046] ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 2.065048] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.073059] ata3.00: configured for UDMA/133
[ 2.073134] scsi 2:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 2.079972] ata4.00: configured for UDMA/100
[ 2.081486] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.01 PQ: 0 ANSI: 5
[ 2.085582] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.085607] sd 2:0:0:0: [sda] Write Protect is off
[ 2.085609] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.085619] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.085698] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.091521] Uniform CD-ROM driver Revision: 3.20
[ 2.091581] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.096434] sda1 sda2 < sda5 >
[ 2.105126] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.107101] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.107119] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.231721] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 2.309507] device-mapper: uevent: version 1.0.3
[ 2.309585] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.406768] usb 4-1: New USB device found, idVendor=046d, idProduct=c062
[ 2.406770] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.406772] usb 4-1: Product: USB Laser Mouse
[ 2.406773] usb 4-1: Manufacturer: Logitech
[ 2.406822] usb 4-1: configuration #1 chosen from 1 choice
[ 2.414342] usbcore: registered new interface driver hiddev
[ 2.428820] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1
[ 2.428870] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-1/input0
[ 2.428886] usbcore: registered new interface driver usbhid
[ 2.428889] usbhid: v2.6:USB HID core driver
[ 2.495960] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 2.495963] EXT4-fs (dm-0): write access will be enabled during recovery
[ 2.516048] EXT4-fs (dm-0): recovery complete
[ 2.516986] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 2.646762] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.824990] usb 5-1: New USB device found, idVendor=0a5c, idProduct=200a
[ 2.824992] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.824994] usb 5-1: Product: BCM92035DGROM
[ 2.824995] usb 5-1: Manufacturer: Broadcom
[ 2.824996] usb 5-1: SerialNumber: 000EA145C98E
[ 2.825111] usb 5-1: configuration #1 chosen from 1 choice
[ 3.065167] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 3.251262] usb 8-2: New USB device found, idVendor=046d, idProduct=c318
[ 3.251264] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.251265] usb 8-2: Product: Logitech Illuminated Keyboard
[ 3.251267] usb 8-2: Manufacturer: Logitech
[ 3.251310] usb 8-2: configuration #1 chosen from 1 choice
[ 3.259363] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2
[ 3.259387] generic-usb 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2/input0
[ 3.263276] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input3
[ 3.263319] generic-usb 0003:046D:C318.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2/input1
[ 3.500064] udev: starting version 160
[ 3.792759] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 3.792767] ACPI: Sleep Button [SLPB]
[ 3.792808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.792810] ACPI: Power Button [PWRF]
[ 3.809961] Monitor-Mwait will be used to enter C-1 state
[ 3.809991] processor LNXCPU:00: registered as cooling_device0
[ 3.810371] processor LNXCPU:01: registered as cooling_device1
[ 3.810780] processor LNXCPU:02: registered as cooling_device2
[ 3.811190] processor LNXCPU:03: registered as cooling_device3
[ 3.811744] processor LNXCPU:04: registered as cooling_device4
[ 3.812168] processor LNXCPU:05: registered as cooling_device5
[ 3.812544] processor LNXCPU:06: registered as cooling_device6
[ 3.812918] processor LNXCPU:07: registered as cooling_device7
[ 3.836014] ACPI: WMI: Mapper loaded
[ 3.880390] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.377497] Bluetooth: Core ver 2.15
[ 4.377586] NET: Registered protocol family 31
[ 4.377587] Bluetooth: HCI device and connection manager initialized
[ 4.377589] Bluetooth: HCI socket layer initialized
[ 4.379125] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4.385434] cfg80211: Using static regulatory domain info
[ 4.385436] cfg80211: Regulatory domain: US
[ 4.385437] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.385440] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 4.385442] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.385444] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.385446] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.385448] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.385450] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 4.385456] cfg80211: Calling CRDA for country: US
[ 4.387191] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.387265] usbcore: registered new interface driver btusb
[ 4.406318] [drm] Initialized drm 1.1.0 20060810
[ 4.474961] [drm] radeon kernel modesetting enabled.
[ 4.474999] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.475003] radeon 0000:02:00.0: setting latency timer to 64
[ 4.475812] [drm] radeon: Initializing kernel modesetting.
[ 4.475947] [drm] register mmio base: 0xD0200000
[ 4.475949] [drm] register mmio size: 65536
[ 4.475996] ATOM BIOS: 95C5.10.79.0.1.AS09
[ 4.476003] [drm] Clocks initialized !
[ 4.478584] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.478586] [drm] RAM width 64bits DDR
[ 4.478634] [TTM] Zone kernel: Available graphics memory: 3058590 kiB.
[ 4.478635] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 4.478646] [drm] radeon: 256M of VRAM memory ready
[ 4.478648] [drm] radeon: 512M of GTT memory ready.
[ 4.478681] alloc irq_desc for 33 on node -1
[ 4.478682] alloc kstat_irqs on node -1
[ 4.478686] alloc irq_2_iommu on node -1
[ 4.478696] radeon 0000:02:00.0: irq 33 for MSI/MSI-X
[ 4.478700] radeon 0000:02:00.0: radeon: using MSI.
[ 4.478723] [drm] radeon: irq initialized.
[ 4.478725] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.478957] [drm] Loading RV620 Microcode
[ 4.478959] platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
[ 4.514710] r600_cp: Failed to load firmware "radeon/RV620_pfp.bin"
[ 4.514751] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 4.514790] radeon 0000:02:00.0: disabling GPU acceleration
[ 4.514848] radeon 0000:02:00.0: ffff8801ac2d8c00 unpin not necessary
[ 4.514850] radeon 0000:02:00.0: ffff8801ac2d8c00 unpin not necessary
[ 4.514856] [drm] Enabling audio support
[ 4.514873] [drm] Default TV standard: NTSC
[ 4.514969] [drm] Radeon Display Connectors
[ 4.514970] [drm] Connector 0:
[ 4.514972] [drm] DIN
[ 4.514973] [drm] Encoders:
[ 4.514974] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 4.514975] [drm] Connector 1:
[ 4.514976] [drm] VGA
[ 4.514978] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.514980] [drm] Encoders:
[ 4.514981] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.514982] [drm] Connector 2:
[ 4.514983] [drm] DVI-I
[ 4.514984] [drm] HPD1
[ 4.514986] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.514988] [drm] Encoders:
[ 4.514989] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 4.514990] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 4.555854] rt61pci 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.559056] alloc irq_desc for 22 on node -1
[ 4.559058] alloc kstat_irqs on node -1
[ 4.559062] alloc irq_2_iommu on node -1
[ 4.559068] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.559112] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.599792] phy0: Selected rate control algorithm 'minstrel'
[ 4.600160] Registered led device: rt61pci-phy0::radio
[ 4.600169] Registered led device: rt61pci-phy0::assoc
[ 4.652187] [drm] fb mappable at 0xE0040000
[ 4.652189] [drm] vram apper at 0xE0000000
[ 4.652190] [drm] size 9437184
[ 4.652191] [drm] fb depth is 24
[ 4.652192] [drm] pitch is 8192
[ 4.657259] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.670080] Console: switching to colour frame buffer device 256x72
[ 4.674454] fb0: radeondrmfb frame buffer device
[ 4.674455] registered panic notifier
[ 4.674458] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
[ 4.674483] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.674516] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 5.371387] loop: module loaded
[ 5.592006] general protection fault: 0000 [#1] SMP
[ 5.592042] last sysfs file: /sys/devices/virtual/block/dm-1/removable
[ 5.592064] CPU 0
[ 5.592078] Modules linked in: loop firewire_sbp2 snd_hda_codec_atihdmi snd_hda_codec_realtek arc4 ecb snd_hda_intel rt61pci snd_hda_codec snd_hwdep rt2x00pci rt2x00lib snd_pcm radeon ttm led_class drm_kms_helper mac80211 snd_seq drm btusb cfg80211 snd_timer i2c_i801 i2c_algo_bit snd_seq_device bluetooth rfkill i2c_core eeprom_93cx6 snd soundcore snd_page_alloc joydev pcspkr evdev wmi processor button psmouse serio_raw ext4 mbcache jbd2 crc16 usbhid hid dm_mod sg sr_mod sd_mod crc_t10dif cdrom ata_generic pata_marvell ata_piix firewire_ohci firewire_core uhci_hcd ahci crc_itu_t libata ehci_hcd scsi_mod usbcore nls_base e1000e thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 5.592604] Pid: 885, comm: vgchange Not tainted 2.6.32-5-amd64 #1
[ 5.592628] RIP: 0010:[<ffffffff810e7268>] [<ffffffff810e7268>] __kmalloc_track_caller+0xcd/0x13c
[ 5.592665] RSP: 0018:ffff8801ac8a1a78 EFLAGS: 00010002
[ 5.592684] RAX: 0000000000000000 RBX: 651b651b135d135d RCX: 0000000000000008
[ 5.592708] RDX: ffff880007011d30 RSI: 00000000000000d0 RDI: 0000000000000003
[ 5.592731] RBP: 0000000000000246 R08: 0000000000000000 R09: ffff8801ad86ea00
[ 5.592754] R10: fffffffffffff001 R11: ffff8801ad86ea00 R12: ffffffff81453f10
[ 5.592777] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000006
[ 5.592800] FS: 00007fb7f48a07a0(0000) GS:ffff880007000000(0000) knlGS:0000000000000000
[ 5.592827] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.592847] CR2: 00007fb7f48b6000 CR3: 00000001acc89000 CR4: 00000000000006f0
[ 5.592870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.592893] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 5.592917] Process vgchange (pid: 885, threadinfo ffff8801ac8a0000, task ffff8801accfb880)
[ 5.592943] Stack:
[ 5.592952] 0000000000000000 ffffffff8113f62d 0000000881660170 0000000000000006
[ 5.592987] <0> ffffffff813b1eaa ffffffff813b1eaa 0000000000000001 ffff8801ac8a1b98
[ 5.593031] <0> 00000000000041ed ffffffff810c6d7b ffff8801af044660 0000000000000000
[ 5.593078] Call Trace:
[ 5.593091] [<ffffffff8113f62d>] ? sysfs_new_dirent+0x2a/0xf7
[ 5.593113] [<ffffffff810c6d7b>] ? kstrdup+0x2b/0x40
[ 5.593131] [<ffffffff8113f62d>] ? sysfs_new_dirent+0x2a/0xf7
[ 5.593152] [<ffffffff8113faa5>] ? create_dir+0x2d/0x7c
[ 5.593171] [<ffffffff8113f498>] ? sysfs_add_one+0x19/0xe4
[ 5.593191] [<ffffffff81140e84>] ? internal_create_group+0x51/0x15a
[ 5.593215] [<ffffffff8121e0e8>] ? device_add+0x35c/0x537
[ 5.593235] [<ffffffff8121e36b>] ? device_create_vargs+0x96/0xc2
[ 5.593256] [<ffffffff810c8504>] ? bdi_register+0x6a/0x175
[ 5.593277] [<ffffffff811764c2>] ? elv_register_queue+0x67/0x6f
[ 5.593299] [<ffffffff8118054b>] ? blk_register_queue+0x7f/0xcc
[ 5.593320] [<ffffffff8118433a>] ? add_disk+0xd1/0x108
[ 5.593343] [<ffffffffa012c048>] ? dm_create+0x420/0x545 [dm_mod]
[ 5.593366] [<ffffffffa013169c>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 5.593388] [<ffffffffa0131705>] ? dev_create+0x69/0x2e9 [dm_mod]
[ 5.593411] [<ffffffffa013169c>] ? dev_create+0x0/0x2e9 [dm_mod]
[ 5.593434] [<ffffffffa0131bfc>] ? ctl_ioctl+0x1c6/0x20e [dm_mod]
[ 5.593457] [<ffffffffa0131c52>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod]
[ 5.593480] [<ffffffff810fa2d6>] ? vfs_ioctl+0x21/0x6c
[ 5.593499] [<ffffffff810fa824>] ? do_vfs_ioctl+0x48d/0x4cb
[ 5.593520] [<ffffffff810f1bcb>] ? sys_newstat+0x23/0x30
[ 5.593539] [<ffffffff810fa8b3>] ? sys_ioctl+0x51/0x70
[ 5.593559] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 5.593580] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[ 5.594004] RIP [<ffffffff810e7268>] __kmalloc_track_caller+0xcd/0x13c
[ 5.594031] RSP <ffff8801ac8a1a78>
[ 5.595736] ---[ end trace 6470c562e7c0307f ]---
[ 5.642150] Adding 1535992k swap on /dev/mapper/VolGroup00-lvolswap. Priority:-1 extents:1 across:1535992k
[ 6.009724] stack segment: 0000 [#2] SMP
[ 6.011565] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda/removable
[ 6.013414] CPU 0
[ 6.015259] Modules linked in: loop firewire_sbp2 snd_hda_codec_atihdmi snd_hda_codec_realtek arc4 ecb snd_hda_intel rt61pci snd_hda_codec snd_hwdep rt2x00pci rt2x00lib snd_pcm radeon ttm led_class drm_kms_helper mac80211 snd_seq drm btusb cfg80211 snd_timer i2c_i801 i2c_algo_bit snd_seq_device bluetooth rfkill i2c_core eeprom_93cx6 snd soundcore snd_page_alloc joydev pcspkr evdev wmi processor button psmouse serio_raw ext4 mbcache jbd2 crc16 usbhid hid dm_mod sg sr_mod sd_mod crc_t10dif cdrom ata_generic pata_marvell ata_piix firewire_ohci firewire_core uhci_hcd ahci crc_itu_t libata ehci_hcd scsi_mod usbcore nls_base e1000e thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 6.021614] Pid: 269, comm: ksuspend_usbd Tainted: G D 2.6.32-5-amd64 #1
[ 6.023655] RIP: 0010:[<ffffffff810e6bc6>] [<ffffffff810e6bc6>] kmem_cache_alloc+0x61/0xf0
[ 6.025699] RSP: 0018:ffff8801ac237ce0 EFLAGS: 00010002
[ 6.027734] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000023
[ 6.029764] RDX: ffff880007011d30 RSI: 0000000000000010 RDI: ffffffff81453f10
[ 6.031797] RBP: 651b651b135d135d R08: 0000000000000002 R09: 0000000000000006
[ 6.033825] R10: ffff8801abbb1a00 R11: dead000000200200 R12: 0000000000000010
[ 6.035841] R13: ffffffff81453f10 R14: ffffffffa0044596 R15: 0000000000000008
[ 6.037855] FS: 0000000000000000(0000) GS:ffff880007000000(0000) knlGS:0000000000000000
[ 6.039874] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 6.041892] CR2: 00007f38864c2c20 CR3: 00000001abb18000 CR4: 00000000000006f0
[ 6.043917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.045960] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6.045963] Process ksuspend_usbd (pid: 269, threadinfo ffff8801ac236000, task ffff8801aac92a60)
[ 6.045964] Stack:
[ 6.045965] 0000001000000000 ffff8801ab708000 ffff8801ab5b7400 0000000000000006
[ 6.045968] <0> 0000000000000000 0000000000000023 0000000000000002 ffffffffa0044596
[ 6.045971] <0> ffff8801ab708000 8000010003040006 ffff8801ac1fc000 0000000000000282
[ 6.045974] Call Trace:
[ 6.045983] [<ffffffffa0044596>] ? usb_control_msg+0x3d/0x135 [usbcore]
[ 6.045989] [<ffffffffa003d4f1>] ? usb_port_suspend+0xa2/0x107 [usbcore]
[ 6.045995] [<ffffffffa00460db>] ? usb_suspend_both+0x1a4/0x27d [usbcore]
[ 6.046002] [<ffffffffa0045de9>] ? usb_autopm_do_device+0xbb/0xd4 [usbcore]
[ 6.046009] [<ffffffff810614ab>] ? worker_thread+0x188/0x21d
[ 6.046016] [<ffffffffa00462da>] ? usb_autosuspend_work+0x0/0xe [usbcore]
[ 6.046019] [<ffffffff81064ad6>] ? autoremove_wake_function+0x0/0x2e
[ 6.046022] [<ffffffff81061323>] ? worker_thread+0x0/0x21d
[ 6.046025] [<ffffffff81064809>] ? kthread+0x79/0x81
[ 6.046030] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 6.046033] [<ffffffff81064790>] ? kthread+0x0/0x81
[ 6.046035] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 6.046036] Code: 48 89 c3 fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c5 f0 02 00 00 48 8b 2a 44 8b 7a 18 48 85 ed 74 0d 8b 42 14 <48> 8b 44 c5 00 48 89 02 eb 17 49 89 d0 4c 89 f1 83 ca ff 44 89
[ 6.046052] RIP [<ffffffff810e6bc6>] kmem_cache_alloc+0x61/0xf0
[ 6.046056] RSP <ffff8801ac237ce0>
[ 6.046058] ---[ end trace 6470c562e7c03080 ]---
[ 6.046060] note: ksuspend_usbd[269] exited with preempt_count 1
=====
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-25) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Oct 15 00:56:30 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/VolGroup00-lvolroot ro single
** Not tainted
** Kernel log:
[ 4.334768] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.334902] usbcore: registered new interface driver btusb
[ 4.369566] rt61pci 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.386095] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.388870] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.388970] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 4.455136] [drm] radeon kernel modesetting enabled.
[ 4.456109] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.456164] radeon 0000:02:00.0: setting latency timer to 64
[ 4.457018] [drm] radeon: Initializing kernel modesetting.
[ 4.457182] [drm] register mmio base: 0xD0200000
[ 4.457230] [drm] register mmio size: 65536
[ 4.457319] ATOM BIOS: 95C5.10.79.0.1.AS09
[ 4.457372] [drm] Clocks initialized !
[ 4.459999] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.460050] [drm] RAM width 64bits DDR
[ 4.460139] [TTM] Zone kernel: Available graphics memory: 3058590 kiB.
[ 4.460191] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 4.460252] [drm] radeon: 256M of VRAM memory ready
[ 4.460300] [drm] radeon: 512M of GTT memory ready.
[ 4.460380] alloc irq_desc for 33 on node -1
[ 4.460381] alloc kstat_irqs on node -1
[ 4.460386] alloc irq_2_iommu on node -1
[ 4.460395] radeon 0000:02:00.0: irq 33 for MSI/MSI-X
[ 4.460399] radeon 0000:02:00.0: radeon: using MSI.
[ 4.460470] [drm] radeon: irq initialized.
[ 4.460517] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.460857] [drm] Loading RV620 Microcode
[ 4.460957] platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
[ 4.474616] phy0: Selected rate control algorithm 'minstrel'
[ 4.474985] Registered led device: rt61pci-phy0::radio
[ 4.475043] Registered led device: rt61pci-phy0::assoc
[ 4.551330] r600_cp: Failed to load firmware "radeon/RV620_pfp.bin"
[ 4.551383] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 4.551435] radeon 0000:02:00.0: disabling GPU acceleration
[ 4.551508] radeon 0000:02:00.0: ffff8801ab903a00 unpin not necessary
[ 4.551559] radeon 0000:02:00.0: ffff8801ab903a00 unpin not necessary
[ 4.551618] [drm] Enabling audio support
[ 4.551671] [drm] Default TV standard: NTSC
[ 4.551826] [drm] Radeon Display Connectors
[ 4.551873] [drm] Connector 0:
[ 4.551917] [drm] DIN
[ 4.551961] [drm] Encoders:
[ 4.552005] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 4.552052] [drm] Connector 1:
[ 4.552097] [drm] VGA
[ 4.552141] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.552205] [drm] Encoders:
[ 4.552248] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.552296] [drm] Connector 2:
[ 4.552340] [drm] DVI-I
[ 4.552384] [drm] HPD1
[ 4.552427] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.552491] [drm] Encoders:
[ 4.552535] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 4.552582] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 4.691685] [drm] fb mappable at 0xE0040000
[ 4.691734] [drm] vram apper at 0xE0000000
[ 4.691781] [drm] size 9437184
[ 4.691826] [drm] fb depth is 24
[ 4.691871] [drm] pitch is 8192
[ 4.709384] Console: switching to colour frame buffer device 256x72
[ 4.713675] fb0: radeondrmfb frame buffer device
[ 4.713692] registered panic notifier
[ 4.713707] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
[ 5.186077] loop: module loaded
[ 5.576808] Adding 1535992k swap on /dev/mapper/VolGroup00-lvolswap. Priority:-1 extents:1 across:1535992k
[ 5.968699] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 6.038609] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 6.660301] rt61pci 0000:07:02.0: firmware: requesting rt2561s.bin
[ 6.737167] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.541986] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 7.597749] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 7.598368] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.937458] fuse init (API version 7.13)
[ 8.697968] wlan0: direct probe to AP 1c:af:f7:7f:70:04 (try 1)
[ 8.705000] wlan0: direct probe responded
[ 8.705002] wlan0: authenticate with AP 1c:af:f7:7f:70:04 (try 1)
[ 8.706729] wlan0: authenticated
[ 8.706736] wlan0: associate with AP 1c:af:f7:7f:70:04 (try 1)
[ 8.709232] wlan0: RX AssocResp from 1c:af:f7:7f:70:04 (capab=0xc31 status=0 aid=3)
[ 8.709233] wlan0: associated
[ 8.709973] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.710038] cfg80211: Calling CRDA for country: GB
[ 18.870005] wlan0: no IPv6 routers present
[ 76.351100] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 76.351102] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 76.351103] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 76.351104] vboxdrv: the usage of hardware performance counters by
[ 76.351105] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 76.356664] vboxdrv: Found 8 processor cores.
[ 76.356710] VBoxDrv: dbg - g_abExecMemory=ffffffffa04296c0
[ 76.358153] vboxdrv: fAsync=0 offMin=0x2fc offMax=0x1aab
[ 76.359538] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 76.360920] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 119.692911] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 133.282002] lo: Disabled Privacy Extensions
[ 1451.036782] lo: Disabled Privacy Extensions
[ 1558.720901] chromium-browse[3008]: segfault at 1a8 ip 00007f6d7167dc0f sp 00007fff8c12ce50 error 4 in chromium-browser[7f6d7110c000+1d2e000]
[ 1566.108616] lo: Disabled Privacy Extensions
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: SOX5810J.86A.3435.2009.0210.2311
board_vendor: Intel Corporation
board_name: DX58SO
board_version: AAE29331-503
** Loaded modules:
Module Size Used by
vboxnetadp 4193 0
vboxnetflt 12525 0
vboxdrv 1723607 2 vboxnetadp,vboxnetflt
fuse 50273 1
ext2 52969 1
loop 11799 0
firewire_sbp2 11514 0
arc4 1274 2
snd_hda_codec_atihdmi 2251 1
ecb 1841 2
radeon 573500 2
snd_hda_codec_realtek 235538 1
ttm 39986 1 radeon
rt61pci 17604 0
drm_kms_helper 20065 1 radeon
rt2x00pci 4605 1 rt61pci
rt2x00lib 21810 2 rt61pci,rt2x00pci
led_class 2433 1 rt2x00lib
btusb 9817 0
drm 142343 4 radeon,ttm,drm_kms_helper
snd_hda_intel 19987 0
snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
mac80211 137340 2 rt2x00pci,rt2x00lib
i2c_algo_bit 4225 1 radeon
cfg80211 101496 2 rt2x00lib,mac80211
eeprom_93cx6 1335 1 rt61pci
snd_seq 42881 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
i2c_i801 7830 0
i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd 46446 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
bluetooth 41827 1 btusb
rfkill 13044 2 cfg80211,bluetooth
psmouse 49777 0
pcspkr 1699 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
joydev 8411 0
evdev 7352 14
wmi 4323 0
processor 30303 0
button 4650 0
serio_raw 3752 0
ext4 289033 3
mbcache 5050 2 ext2,ext4
jbd2 67015 1 ext4
crc16 1319 1 ext4
usbhid 33292 0
hid 62857 1 usbhid
dm_mod 53770 12
sg 18744 0
sr_mod 12602 0
sd_mod 29777 3
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
pata_marvell 2629 0
ahci 32358 0
ata_piix 21124 2
firewire_ohci 19468 0
libata 133616 4 ata_generic,pata_marvell,ahci,ata_piix
firewire_core 36800 2 firewire_sbp2,firewire_ohci
uhci_hcd 18521 0
crc_itu_t 1307 2 rt61pci,firewire_core
ehci_hcd 31135 0
usbcore 121938 5 btusb,usbhid,uhci_hcd,ehci_hcd
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
nls_base 6377 1 usbcore
e1000e 110031 0
thermal 11674 0
thermal_sys 11942 2 processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
auto wlan0
iface wlan0 inet static
address 192.168.0.99
netmask 255.255.255.0
gateway 192.168.0.1
wpa-ssid censored
wpa-psk ****************
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:1c:c0:a3:9a:f2 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1f:1f:51:14:ab brd ff:ff:ff:ff:ff:ff
inet 192.168.0.99/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::21f:1fff:fe51:14ab/64 scope link
valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 83660 886 0 0 0 0 0 0 83660 886 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 1017890 2313 0 0 0 0 0 0 449920 2385 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3086 total packets received
0 forwarded
0 incoming packets discarded
2996 incoming packets delivered
3224 requests sent out
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 3
echo replies: 5
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3
echo request: 5
IcmpMsg:
InType0: 5
InType3: 3
OutType3: 3
OutType8: 5
Tcp:
125 active connections openings
0 passive connection openings
10 failed connection attempts
2 connection resets received
14 connections established
1867 segments received
2113 segments send out
0 segments retransmited
0 bad segments received.
83 resets sent
Udp:
1055 packets received
3 packets to unknown port received.
0 packet receive errors
1107 packets sent
UdpLite:
TcpExt:
31 TCP sockets finished time wait in fast timer
86 delayed acks sent
Quick ack mode was activated 2 times
18 packets directly queued to recvmsg prequeue.
1561 bytes directly received in process context from prequeue
725 packet headers predicted
6 packets header predicted and directly queued to user
318 acknowledgments not containing data payload received
136 predicted acknowledgments
2 DSACKs sent for old packets
10 connections reset due to unexpected data
1 connections reset due to early user close
TCPSackShiftFallback: 10
IpExt:
InMcastPkts: 9
InBcastPkts: 56
InOctets: 1052847
OutOctets: 450413
InMcastOctets: 252
InBcastOctets: 9798
*** Device features:
eth0: 0x1109a9
lo: 0x13865
vboxnet0: 0x0
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 12)
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 12) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 12) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-2 Gigabit Network Connection [8086:10cc]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d0322000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0321000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Intel Corporation Device [8086:0022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0100000-d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0320000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Memory behind bridge: d0000000-d00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 3158 [size=8]
Region 1: I/O ports at 316c [size=4]
Region 2: I/O ports at 3150 [size=8]
Region 3: I/O ports at 3168 [size=4]
Region 4: I/O ports at 3130 [size=16]
Region 5: I/O ports at 3120 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f0004000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 3148 [size=8]
Region 1: I/O ports at 3164 [size=4]
Region 2: I/O ports at 3140 [size=8]
Region 3: I/O ports at 3160 [size=4]
Region 4: I/O ports at 3110 [size=16]
Region 5: I/O ports at 3100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0200000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 2000 [size=256]
Expansion ROM at d0220000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0210000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
06:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
07:02.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]
Subsystem: Edimax Computer Co. Device [1432:7128]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
07:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:4f53]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d000c000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 008 Device 002: ID 046d:c318 Logitech, Inc. Illuminated Keyboard
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0a5c:200a Broadcom Corp. Bluetooth dongle
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c062 Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=nl_NL.UTF-8, LC_CTYPE=nl_NL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs
ii linux-base 2.6.32-25 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.26 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---