Bug#598793: sas controller resets causes drives to fail under mdadm
Package: linux-image-2.6.26-2-xen-amd64
Version: 2.6.26-24lenny1
Severity: important
The mpt SAS controller seems to misinterpret messages from the SATA
drives connected to the SAS controller - causing mdadm to remove them
from the array. The net result during this event is the array goes
read-only or worse corrupts data.
This issue has occurred on this version of equipment when running
S.M.A.R.T. - which may be related?
This has occurred on a 32bit system of same / similar configuration also.
lspci:
# lspci
00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to
ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 (rev 13)
00:09.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 9 (rev 13)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers (rev 13)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control
Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
Registers (rev 13)
00:16.0 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.1 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.2 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.3 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.4 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.5 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.6 System peripheral: Intel Corporation DMA Engine (rev 13)
00:16.7 System peripheral: Intel Corporation DMA Engine (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
05:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E
PCI-Express Fusion-MPT SAS (rev 08)
06:04.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW
WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a)
lsmod shows the following:
lsmod
Module Size Used by
xt_physdev 6928 52
ebt_arp 6784 28
ebt_ip 6528 28
xt_multiport 7424 1
ebt_log 7940 25
ebtable_filter 6656 1
ebtables 22400 4 ebt_arp,ebt_ip,ebt_log,ebtable_filter
bridge 53800 0
netloop 9088 0
ipv6 289352 32
ipt_REJECT 7552 1
xt_tcpudp 7680 38
iptable_filter 7424 1
ip_tables 21392 1 iptable_filter
x_tables 25096 5
xt_physdev,xt_multiport,ipt_REJECT,xt_tcpudp,ip_tables
loop 19724 0
serio_raw 9988 0
i2c_i801 13468 0
pcspkr 7040 0
psmouse 42396 0
i2c_core 27936 1 i2c_i801
button 11680 0
joydev 15232 0
evdev 14592 0
ext3 125456 3
jbd 54696 1 ext3
mbcache 13188 1 ext3
dm_mirror 21120 0
dm_log 14212 1 dm_mirror
dm_snapshot 19400 2
dm_mod 59248 145 dm_mirror,dm_log,dm_snapshot
raid10 24192 2
raid1 24832 1
md_mod 81700 5 raid10,raid1
ide_pci_generic 9220 0 [permanent]
ide_core 129308 1 ide_pci_generic
ata_piix 22916 0
sd_mod 29376 32
usb_storage 96320 1
usbhid 46048 0
hid 41920 1 usbhid
ff_memless 9352 1 usbhid
floppy 61480 0
ata_generic 10116 0
libata 165728 2 ata_piix,ata_generic
mptsas 30096 22
mptscsih 29568 1 mptsas
dock 14240 1 libata
mptbase 62052 2 mptsas,mptscsih
ehci_hcd 36620 0
uhci_hcd 26272 0
scsi_transport_sas 37632 1 mptsas
scsi_mod 161528 6
sd_mod,usb_storage,libata,mptsas,mptscsih,scsi_transport_sas
e1000e 105000 0
thermal 22688 0
processor 42436 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
dmesg / syslog shows the following:
Oct 2 07:17:01 server /USR/SBIN/CRON[28271]: (root) CMD ( cd / &&
run-parts --report /etc/cron.hourly)
Oct 2 07:17:25 server kernel: [3206336.453134] mptscsih: ioc0:
attempting task abort! (sc=ffff88001e5bd0c0)
Oct 2 07:17:25 server kernel: [3206336.453172] sd 1:0:3:0: [sde] CDB:
Synchronize Cache(10): 35 00 00 00 00 00 00 00 00 00
Oct 2 07:17:29 server kernel: [3206340.786961] mptbase: ioc0:
LogInfo(0x31140000): Originator={PL}, Code={IO Executed}, SubCode(0x0000)
Oct 2 07:17:29 server kernel: [3206340.787422] mptsas: ioc0: removing
sata device, channel 0, id 3, phy 3
Oct 2 07:17:29 server kernel: [3206340.787459] port-1:3: mptsas: ioc0:
delete port (3)
Oct 2 07:17:29 server kernel: [3206340.787614] sd 1:0:3:0: [sde]
Synchronizing SCSI cache
Oct 2 07:17:29 server kernel: [3206340.813724] mptscsih: ioc0: task
abort: SUCCESS (sc=ffff88001e5bd0c0)
Oct 2 07:17:29 server kernel: [3206340.813771] mptscsih: ioc0:
attempting target reset! (sc=ffff88001e5bd0c0)
Oct 2 07:17:29 server kernel: [3206340.813809] sd 1:0:3:0: [sde] CDB:
Synchronize Cache(10): 35 00 00 00 00 00 00 00 00 00
Oct 2 07:17:29 server kernel: [3206341.069665] mptscsih: ioc0: target
reset: SUCCESS (sc=ffff88001e5bd0c0)
Oct 2 07:17:29 server kernel: [3206341.069716] mptscsih: ioc0:
attempting bus reset! (sc=ffff88001e5bd0c0)
Oct 2 07:17:29 server kernel: [3206341.069753] sd 1:0:3:0: [sde] CDB:
Synchronize Cache(10): 35 00 00 00 00 00 00 00 00 00
Oct 2 07:17:30 server kernel: [3206341.581610] mptscsih: ioc0: bus
reset: SUCCESS (sc=ffff88001e5bd0c0)
Oct 2 07:17:40 server kernel: [3206351.585781] mptscsih: ioc0:
attempting host reset! (sc=ffff88001e5bd0c0)
Oct 2 07:17:40 server kernel: [3206351.585825] mptbase: ioc0:
Initiating recovery
Oct 2 07:18:01 server kernel: [3206372.904068] mptscsih: ioc0: host
reset: SUCCESS (sc=ffff88001e5bd0c0)
Oct 2 07:18:01 server kernel: [3206372.904109] sd 1:0:3:0: Device
offlined - not ready after error recovery
Oct 2 07:18:01 server kernel: [3206372.904146] end_request: I/O error,
dev sde, sector 976767931
Oct 2 07:18:01 server kernel: [3206372.904180] md: super_written gets
error=-5, uptodate=0
Oct 2 07:18:01 server kernel: [3206372.904212] raid10: Disk failure on
sde6, disabling device.
Oct 2 07:18:01 server kernel: [3206372.904213] raid10: Operation
continuing on 7 devices.
Oct 2 07:18:01 server kernel: [3206372.904333] end_request: I/O error,
dev sde, sector 20000703
Oct 2 07:18:01 server kernel: [3206372.904367] md: super_written gets
error=-5, uptodate=0
Oct 2 07:18:01 server kernel: [3206372.904399] raid1: Disk failure on
sde1, disabling device.
Oct 2 07:18:01 server kernel: [3206372.904400] raid1: Operation
continuing on 7 devices.
Oct 2 07:18:01 server kernel: [3206372.904480] raid10: sde5:
rescheduling sector 136
Oct 2 07:18:01 server kernel: [3206372.904652] sd 1:0:3:0: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
Oct 2 07:18:01 server kernel: [3206373.235235] end_request: I/O error,
dev sdg, sector 976767931
Oct 2 07:18:01 server kernel: [3206373.235235] md: super_written gets
error=-5, uptodate=0
Oct 2 07:18:01 server kernel: [3206373.235235] raid10: Disk failure on
sdg6, disabling device.
Oct 2 07:18:01 server kernel: [3206373.235235] raid10: Operation
continuing on 6 devices.
Oct 2 07:18:01 server kernel: [3206373.242357] end_request: I/O error,
dev sdf, sector 976767931
Oct 2 07:18:01 server kernel: [3206373.242357] md: super_written gets
error=-5, uptodate=0
Oct 2 07:18:01 server kernel: [3206373.242357] raid10: Disk failure on
sdf6, disabling device.
Oct 2 07:18:01 server kernel: [3206373.242357] raid10: Operation
continuing on 5 devices.
Oct 2 07:18:01 server kernel: [3206373.247008] end_request: I/O error,
dev sdb, sector 976767931
Oct 2 07:18:01 server kernel: [3206373.247040] md: super_written gets
error=-5, uptodate=0
Oct 2 07:18:01 server kernel: [3206373.247069] raid10: Disk failure on
sdb6, disabling device.
Oct 2 07:18:01 server kernel: [3206373.247070] raid10: Operation
continuing on 4 devices.
Oct 2 07:18:01 server kernel: [3206373.298088] raid10: Disk failure on
sde5, disabling device.
Oct 2 07:18:01 server kernel: [3206373.298090] raid10: Operation
continuing on 7 devices.
Oct 2 07:18:01 server kernel: [3206373.298155] raid10: sdd5:
redirecting sector 136 to another mirror
Oct 2 07:18:01 server kernel: [3206373.330494] RAID1 conf printout:
Oct 2 07:18:01 server kernel: [3206373.330524] --- wd:7 rd:8
Oct 2 07:18:01 server kernel: [3206373.330560] disk 0, wo:0, o:1, dev:sdb1
Oct 2 07:18:01 server kernel: [3206373.330587] disk 1, wo:0, o:1, dev:sdc1
Oct 2 07:18:01 server kernel: [3206373.330613] disk 2, wo:0, o:1, dev:sdd1
Oct 2 07:18:01 server kernel: [3206373.330640] disk 3, wo:1, o:0, dev:sde1
Oct 2 07:18:01 server kernel: [3206373.330666] disk 4, wo:0, o:1, dev:sdf1
Oct 2 07:18:01 server kernel: [3206373.330693] disk 5, wo:0, o:1, dev:sdg1
Oct 2 07:18:01 server kernel: [3206373.330719] disk 6, wo:0, o:1, dev:sdh1
Oct 2 07:18:01 server kernel: [3206373.330745] disk 7, wo:0, o:1, dev:sdi1
Oct 2 07:18:01 server kernel: [3206373.337150] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.337150] --- wd:7 rd:8
Oct 2 07:18:01 server kernel: [3206373.337150] disk 0, wo:0, o:1, dev:sdb5
Oct 2 07:18:01 server kernel: [3206373.337150] disk 1, wo:0, o:1, dev:sdc5
Oct 2 07:18:01 server kernel: [3206373.337150] disk 2, wo:0, o:1, dev:sdd5
Oct 2 07:18:01 server kernel: [3206373.337150] disk 3, wo:1, o:0, dev:sde5
Oct 2 07:18:01 server kernel: [3206373.337150] disk 4, wo:0, o:1, dev:sdf5
Oct 2 07:18:01 server kernel: [3206373.337150] disk 5, wo:0, o:1, dev:sdg5
Oct 2 07:18:01 server kernel: [3206373.337201] disk 6, wo:0, o:1, dev:sdh5
Oct 2 07:18:01 server kernel: [3206373.337228] disk 7, wo:0, o:1, dev:sdi5
Oct 2 07:18:01 server kernel: [3206373.341177] RAID1 conf printout:
Oct 2 07:18:01 server kernel: [3206373.341204] --- wd:7 rd:8
Oct 2 07:18:01 server kernel: [3206373.341228] disk 0, wo:0, o:1, dev:sdb1
Oct 2 07:18:01 server kernel: [3206373.341258] disk 1, wo:0, o:1, dev:sdc1
Oct 2 07:18:01 server kernel: [3206373.341285] disk 2, wo:0, o:1, dev:sdd1
Oct 2 07:18:01 server kernel: [3206373.341311] disk 4, wo:0, o:1, dev:sdf1
Oct 2 07:18:01 server kernel: [3206373.341338] disk 5, wo:0, o:1, dev:sdg1
Oct 2 07:18:01 server kernel: [3206373.341364] disk 6, wo:0, o:1, dev:sdh1
Oct 2 07:18:01 server kernel: [3206373.341390] disk 7, wo:0, o:1, dev:sdi1
Oct 2 07:18:01 server kernel: [3206373.347812] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.347840] --- wd:7 rd:8
Oct 2 07:18:01 server kernel: [3206373.347864] disk 0, wo:0, o:1, dev:sdb5
Oct 2 07:18:01 server kernel: [3206373.347890] disk 1, wo:0, o:1, dev:sdc5
Oct 2 07:18:01 server kernel: [3206373.347916] disk 2, wo:0, o:1, dev:sdd5
Oct 2 07:18:01 server kernel: [3206373.347943] disk 4, wo:0, o:1, dev:sdf5
Oct 2 07:18:01 server kernel: [3206373.347969] disk 5, wo:0, o:1, dev:sdg5
Oct 2 07:18:01 server kernel: [3206373.347995] disk 6, wo:0, o:1, dev:sdh5
Oct 2 07:18:01 server kernel: [3206373.348022] disk 7, wo:0, o:1, dev:sdi5
Oct 2 07:18:01 server kernel: [3206373.376309] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.376340] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.376364] disk 0, wo:1, o:0, dev:sdb6
Oct 2 07:18:01 server kernel: [3206373.376391] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.376418] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.376445] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.376488] disk 4, wo:1, o:0, dev:sdf6
Oct 2 07:18:01 server kernel: [3206373.376514] disk 5, wo:1, o:0, dev:sdg6
Oct 2 07:18:01 server kernel: [3206373.376541] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.376567] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.384377] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.384408] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.384434] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.384462] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.384490] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.384517] disk 4, wo:1, o:0, dev:sdf6
Oct 2 07:18:01 server kernel: [3206373.384543] disk 5, wo:1, o:0, dev:sdg6
Oct 2 07:18:01 server kernel: [3206373.384569] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.384596] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.384628] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.384652] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.384676] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.384703] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.384729] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.384755] disk 4, wo:1, o:0, dev:sdf6
Oct 2 07:18:01 server kernel: [3206373.384781] disk 5, wo:1, o:0, dev:sdg6
Oct 2 07:18:01 server kernel: [3206373.384807] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.384833] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.396419] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.396449] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.396474] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.396501] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.396527] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.396554] disk 4, wo:1, o:0, dev:sdf6
Oct 2 07:18:01 server kernel: [3206373.396580] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.396606] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.396637] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.396662] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.396686] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.396712] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.396738] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.396765] disk 4, wo:1, o:0, dev:sdf6
Oct 2 07:18:01 server kernel: [3206373.396791] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.396817] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.413245] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.413275] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.413300] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.413327] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.413353] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.413380] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.413406] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.413438] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.413463] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.413487] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.413513] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.413540] disk 3, wo:1, o:0, dev:sde6
Oct 2 07:18:01 server kernel: [3206373.413566] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.413592] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:01 server kernel: [3206373.423601] RAID10 conf printout:
Oct 2 07:18:01 server kernel: [3206373.423643] --- wd:4 rd:8
Oct 2 07:18:01 server kernel: [3206373.423678] disk 1, wo:0, o:1, dev:sdc6
Oct 2 07:18:01 server kernel: [3206373.423711] disk 2, wo:0, o:1, dev:sdd6
Oct 2 07:18:01 server kernel: [3206373.423738] disk 6, wo:0, o:1, dev:sdh6
Oct 2 07:18:01 server kernel: [3206373.423774] disk 7, wo:0, o:1, dev:sdi6
Oct 2 07:18:36 server kernel: [3206408.587825] mptsas: ioc0: attaching
sata device, channel 0, id 3, phy 3
Oct 2 07:18:36 server kernel: [3206408.593909] scsi 1:0:8:0:
Direct-Access ATA WDC WD5000BEKT-6 1A01 PQ: 0 ANSI: 5
Oct 2 07:18:36 server kernel: [3206408.595094] sd 1:0:8:0: [sdj]
976773168 512-byte hardware sectors (500108 MB)
Oct 2 07:18:36 server kernel: [3206408.601903] sd 1:0:8:0: [sdj] Write
Protect is off
Oct 2 07:18:36 server kernel: [3206408.601936] sd 1:0:8:0: [sdj] Mode
Sense: 73 00 00 08
Oct 2 07:18:36 server kernel: [3206408.607187] sd 1:0:8:0: [sdj] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 2 07:18:36 server kernel: [3206408.607874] sd 1:0:8:0: [sdj]
976773168 512-byte hardware sectors (500108 MB)
Oct 2 07:18:36 server kernel: [3206408.614891] sd 1:0:8:0: [sdj] Write
Protect is off
Oct 2 07:18:36 server kernel: [3206408.614924] sd 1:0:8:0: [sdj] Mode
Sense: 73 00 00 08
Oct 2 07:18:36 server kernel: [3206408.620194] sd 1:0:8:0: [sdj] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 2 07:18:36 server kernel: [3206408.620252] sdj: sdj1 sdj2 < sdj5
sdj6 >
Oct 2 07:18:36 server kernel: [3206408.958347] sd 1:0:8:0: [sdj]
Attached SCSI disk
Packages installed:
# dpkg -l
Desired=Unknown/Install/Remove/Purge/Hold
|
Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
uppercase=bad)
||/ Name
Version Description
+++-=====================================================-=====================================================-==========================================================================================================================
ii acpi
1.1-2 displays
information on ACPI devices
ii acpi-support-base
0.109-11 scripts for
handling base ACPI events such as the power button
ii acpid
1.0.8-1lenny2 Utilities for
using ACPI power management
ii adduser
3.110 add and remove
users and groups
ii apt
0.7.20.2+lenny2 Advanced front-end
for dpkg
ii apt-utils
0.7.20.2+lenny2 APT utility programs
ii aptitude
0.4.11.11-1~lenny1 terminal-based
package manager
ii base-files
5lenny6 Debian base system
miscellaneous files
ii base-passwd
3.5.20 Debian base system
master password and group files
ii bash
3.2-4 The GNU Bourne
Again SHell
ii binutils
2.18.1~cvs20080103-7 The GNU assembler,
linker and binary utilities
ii bridge-utils
1.4-5 Utilities for
configuring the Linux Ethernet bridge
ii bsd-mailx
8.1.2-0.20071201cvs-3 A simple mail user
agent
ii bsdmainutils
6.1.10 collection of more
utilities from FreeBSD
ii bsdutils
1:2.13.1.1-1 Basic utilities
from 4.4BSD-Lite
ii busybox
1:1.10.2-2 Tiny utilities for
small and embedded systems
ii bzip2
1.0.5-1 high-quality
block-sorting file compressor - utilities
ii ca-certificates
20080809 Common CA certificates
ii console-common
0.7.80 basic
infrastructure for text console configuration
ii console-data
2:1.07-11 keymaps, fonts,
charset maps, fallback tables for console-tools
ii console-tools
1:0.2.3dbs-65.1 Linux console and
font utilities
ii coreutils
6.10-6 The GNU core utilities
ii cpio
2.9-13lenny1 GNU cpio -- a
program to manage archives of files
ii cron
3.0pl1-105 management of
regular background processing
ii debconf
1.5.24 Debian
configuration management system
ii debconf-i18n
1.5.24 full
internationalization support for debconf
ii debian-archive-keyring
2009.01.31 GnuPG archive keys
of the Debian archive
ii debian-backports-keyring
2009.02.20 GnuPG archive key
of the backports.org repository
ii debianutils
2.30 Miscellaneous
utilities specific to Debian
ii debootstrap
1.0.10lenny1 Bootstrap a basic
Debian system
ii dhcp3-client
3.1.1-6+lenny4 DHCP client
ii dhcp3-common
3.1.1-6+lenny4 common files used
by all the dhcp3* packages
ii diff
2.8.1-12 File comparison
utilities
ii dmidecode
2.9-1 Dump Desktop
Management Interface data
ii dmsetup
2:1.02.27-4 The Linux Kernel
Device Mapper userspace library
ii dpkg
1.14.29 Debian package
management system
ii e2fslibs
1.41.3-1 ext2 filesystem
libraries
ii e2fsprogs
1.41.3-1 ext2/ext3/ext4
file system utilities
ii ebtables
2.0.8.2-4 Ethernet bridge
frame table administration
ii ed
0.7-3 The classic unix
line editor
ii exim4
4.69-9 metapackage to
ease Exim MTA (v4) installation
ii exim4-base
4.69-9 support files for
all Exim MTA (v4) packages
ii exim4-config
4.69-9 configuration for
the Exim MTA (v4)
ii exim4-daemon-light
4.69-9 lightweight Exim
MTA (v4) daemon
ii fail2ban
0.8.3-2sid1 bans IPs that
cause multiple authentication errors
ii file
4.26-1 Determines file
type using "magic" numbers
ii findutils
4.4.0-2 utilities for
finding files--find, xargs
ii firmware-linux-free
2.6.32-11~bpo50+1 Binary firmware
for various drivers in the Linux kernel
ii gcc-4.2-base
4.2.4-6 The GNU Compiler
Collection (base package)
ii gcc-4.3-base
4.3.2-1.1 The GNU Compiler
Collection (base package)
ii gnupg
1.4.9-3+lenny1 GNU privacy guard
- a free PGP replacement
ii gpgv
1.4.9-3+lenny1 GNU privacy guard
- signature verification tool
ii grep
2.5.3~dfsg-6 GNU grep, egrep
and fgrep
ii groff-base
1.18.1.1-21 GNU troff
text-formatting system (base system components)
ii grub
0.97-47lenny2 GRand Unified
Bootloader (Legacy version)
ii grub-common
1.96+20080724-16 GRand Unified
Bootloader, version 2 (common files)
ii gzip
1.3.12-6+lenny1 The GNU
compression utility
ii hostname
2.95 utility to
set/show the host name or domain name
ii ifupdown
0.6.8+nmu1 high level tools
to configure network interfaces
ii info
4.11.dfsg.1-4 Standalone GNU
Info documentation browser
ii initramfs-tools
0.92o tools for
generating an initramfs
ii initscripts
2.86.ds1-61 Scripts for
initializing and shutting down the system
ii installation-report
2.38 system
installation report
ii iproute
20080725-2 networking and
traffic control tools
ii iptables
1.4.2-6 administration
tools for packet filtering and NAT
ii iputils-ping
3:20071127-1 Tools to test the
reachability of network hosts
ii klibc-utils
1.5.12-2 small utilities
built with klibc for early boot
ii laptop-detect
0.13.6 attempt to detect
a laptop
ii less
418-1 Pager program
similar to more
ii libacl1
2.2.47-2 Access control
list shared library
ii libapt-pkg-perl
0.1.22+b1 Perl interface to
libapt-pkg
ii libasound2
1.0.16-2 ALSA library
ii libattr1
1:2.4.43-2 Extended attribute
shared library
ii libbeecrypt6
4.1.2-7 open source C
library of cryptographic algorithms
ii libblkid1
1.41.3-1 block device id
library
ii libbz2-1.0
1.0.5-1 high-quality
block-sorting file compressor library - runtime
ii libc6
2.7-18lenny4 GNU C Library:
Shared libraries
ii libcap1
1:1.10-14 support for
getting/setting POSIX.1e capabilities
ii libcomerr2
1.41.3-1 common error
description library
ii libcompress-raw-zlib-perl
2.012-1lenny1 low-level
interface to zlib compression library
ii libcompress-zlib-perl
2.012-1 Perl module for
creation and manipulation of gzip files
ii libconfig-inifiles-perl
2.39-5 Read .ini-style
configuration files
ii libconsole
1:0.2.3dbs-65.1 Shared libraries
for Linux console and font manipulation
ii libcurl3
7.18.2-8lenny4 Multi-protocol
file transfer library (OpenSSL)
ii libcwidget3
0.5.12-4 high-level
terminal interface library for C++ (runtime files)
ii libdb4.5
4.5.20-13 Berkeley v4.5
Database Libraries [runtime]
ii libdb4.6
4.6.21-11 Berkeley v4.6
Database Libraries [runtime]
ii libdevmapper1.02.1
2:1.02.27-4 The Linux Kernel
Device Mapper userspace library
ii libdirectfb-1.0-0
1.0.1-11 direct frame
buffer graphics - shared libraries
ii libedit2
2.11~20080614-1 BSD editline and
history libraries
ii libept0
0.5.22 High-level library
for managing Debian package information
ii libexpect-perl
1.20-1 Expect.pm - Perl
Expect interface
ii libfont-afm-perl
1.20-1 Font::AFM -
Interface to Adobe Font Metrics files
ii libgcc1
1:4.3.2-1.1 GCC support library
ii libgcrypt11
1.4.1-1 LGPL Crypto
library - runtime library
ii libgdbm3
1.8.3-3 GNU dbm database
routines (runtime version)
ii libgnutls26
2.4.2-6+lenny2 the GNU TLS
library - runtime library
ii libgpg-error0
1.4-2 library for common
error values and messages in GnuPG components
ii libgpm2
1.20.4-3.1 General Purpose
Mouse - shared library
ii libhtml-format-perl
2.04-2 format HTML syntax
trees into text, PostScript or RTF
ii libhtml-parser-perl
3.56-1+lenny1 A collection of
modules that parse HTML text documents
ii libhtml-tagset-perl
3.20-2 Data tables
pertaining to HTML
ii libhtml-tree-perl
3.23-1 represent and
create HTML syntax trees
ii libidn11
1.8+20080606-1 GNU libidn
library, implementation of IETF IDN specifications
ii libio-compress-base-perl
2.012-1 Base Class for
IO::Compress modules
ii libio-compress-zlib-perl
2.012-1 Perl interface to zlib
ii libio-pty-perl
1:1.07-1+b1 Perl module for
pseudo tty IO
ii libio-stty-perl
0.02-10 Interface to
secure pseudo ttys
ii libkeyutils1
1.2-9 Linux Key
Management Utilities (library)
ii libklibc
1.5.12-2 minimal libc
subset for use with initramfs
ii libkrb53
1.6.dfsg.4~beta1-5lenny4 MIT Kerberos
runtime libraries
ii libldap-2.4-2
2.4.11-1+lenny2 OpenLDAP libraries
ii liblocale-gettext-perl
1.05-4 Using libc
functions for internationalization in Perl
ii liblockfile1
1.08-3 NFS-safe locking
library, includes dotlockfile program
ii libmagic1
4.26-1 File type
determination library using "magic" numbers
ii libmailtools-perl
2.03-1 Manipulate email
in perl programs
ii libncurses5
5.7+20081213-1 shared libraries
for terminal handling
ii libncursesw5
5.7+20081213-1 shared libraries
for terminal handling (wide character support)
ii libneon27
0.28.2-6.1 An HTTP and WebDAV
client library
ii libnewt0.52
0.52.2-11.3+lenny1 Not Erik's
Windowing Toolkit - text mode windowing with slang
ii libpam-modules
1.0.1-5+lenny1 Pluggable
Authentication Modules for PAM
ii libpam-runtime
1.0.1-5+lenny1 Runtime support
for the PAM library
ii libpam0g
1.0.1-5+lenny1 Pluggable
Authentication Modules library
ii libpcap0.8
0.9.8-5 system interface
for user-level packet capture
ii libpci3
1:3.0.0-6 Linux PCI
Utilities (shared library)
ii libpcre3
7.6-2.1 Perl 5 Compatible
Regular Expression Library - runtime files
ii libpopt0
1.14-4 lib for parsing
cmdline parameters
ii libreadline5
5.2-3.1 GNU readline and
history libraries, run-time libraries
ii librpm4.4
4.4.2.3-1 RPM shared library
ii libsasl2-2
2.1.22.dfsg1-23+lenny1 Cyrus SASL -
authentication abstraction library
ii libsdl1.2debian
1.2.13-2 Simple DirectMedia
Layer
ii libsdl1.2debian-alsa
1.2.13-2 Simple DirectMedia
Layer (with X11 and ALSA options)
ii libselinux1
2.0.65-5 SELinux shared
libraries
ii libsepol1
2.0.30-2 Security Enhanced
Linux policy library for changing policy binaries
ii libsigc++-2.0-0c2a
2.0.18-2 type-safe Signal
Framework for C++ - runtime
ii libslang2
2.1.3-3 The S-Lang
programming library - runtime version
ii libsqlite0
2.8.17-4 SQLite shared library
ii libsqlite3-0
3.5.9-6 SQLite 3 shared
library
ii libss2
1.41.3-1 command-line
interface parsing library
ii libssh2-1
0.18-1 SSH2 client-side
library
ii libssl0.9.8
0.9.8g-15+lenny7 SSL shared libraries
ii libstdc++6
4.3.2-1.1 The GNU Standard
C++ Library v3
ii libsvga1
1:1.4.3-27 console SVGA
display libraries
ii libsysfs2
2.1.0-5 interface library
to sysfs
ii libtasn1-3
1.4-1 Manage ASN.1
structures (runtime)
ii libterm-readline-gnu-perl
1.17a-2+b1 Perl extension for
the GNU Readline/History Library
ii libterm-size-perl
0.2-4+b1 Perl extension for
retrieving terminal size
ii libtext-charwidth-perl
0.04-5+b1 get display widths
of characters on the terminal
ii libtext-iconv-perl
1.7-1+b1 converts between
character sets in Perl
ii libtext-template-perl
1.44-1.2 Text::Template
perl module
ii libtext-wrapi18n-perl
0.06-6 internationalized
substitute of Text::Wrap
ii libtimedate-perl
1.1600-9 Time and date
functions for Perl
ii libts-0.0-0
1.0-4 touch screen library
ii liburi-perl
1.35.dfsg.1-1 Manipulates and
accesses URI strings
ii libusb-0.1-4
2:0.1.12-13 userspace USB
programming library
ii libuuid-perl
0.02-3+b1 Perl extension for
using UUID interfaces as defined in e2fsprogs
ii libuuid1
1.41.3-1 universally unique
id library
ii libvolume-id0
0.125-7+lenny3 libvolume_id
shared library
ii libwrap0
7.6.q-16 Wietse Venema's
TCP wrappers library
ii libwww-perl
5.813-1 WWW client/server
library for Perl (aka LWP)
ii libx86-1
1.1+ds1-2 x86 real-mode library
ii libxapian15
1.0.7-4 Search engine library
ii libxenstore3.0
3.2.1-2 Xenstore
communications library for Xen
ii libxml2
2.6.32.dfsg-5+lenny1 GNOME XML library
ii linux-base
2.6.32-11~bpo50+1 Linux image base
package
ii linux-image-2.6-amd64
2.6.26+17+lenny1 Linux 2.6 image on
AMD64
ii linux-image-2.6.26-2-amd64
2.6.26-24lenny1 Linux 2.6.26 image
on AMD64
ii linux-image-2.6.26-2-xen-amd64
2.6.26-24lenny1 Linux 2.6.26 image
on AMD64, oldstyle Xen support
ii linux-image-2.6.32-bpo.4-xen-amd64
2.6.32-11~bpo50+1 Linux 2.6.32 for
64-bit PCs, Xen dom0 support
ii linux-modules-2.6.26-2-xen-amd64
2.6.26-24lenny1 Linux 2.6.26
modules on AMD64
ii locales
2.7-18lenny4 GNU C Library:
National Language (locale) data [support]
ii lockfile-progs
0.1.11-0.1 Programs for
locking and unlocking files and mailboxes
ii login
1:4.1.1-6+lenny1 system login tools
ii logrotate
3.7.1-5 Log rotation utility
ii logtail
1.2.69 Print log file
lines that have not been read (deprecated)
ii lsb-base
3.2-20 Linux Standard
Base 3.2 init script functionality
ii lshw
02.13-2 information about
hardware configuration
ii lsof
4.78.dfsg.1-4 List open files
ii lvm2
2.02.39-8 The Linux Logical
Volume Manager
ii lzma
4.43-14 Compression method
of 7z format in 7-Zip program
ii mailx
1:20071201-3 Transitional
package for mailx rename
ii makedev
2.3.1-88 creates device
files in /dev
ii man-db
2.5.2-4 on-line manual pager
ii manpages
3.05-1 Manual pages about
using a GNU/Linux system
ii mawk
1.3.3-11.1 a pattern scanning
and text processing language
ii mdadm
2.6.7.2-3 tool to administer
Linux MD arrays (software RAID)
ii mime-support
3.44-1 MIME files
'mime.types' & 'mailcap', and support programs
ii mktemp
1.5-9 tool for creating
temporary files
ii module-init-tools
3.4-1 tools for managing
Linux kernel modules
ii mount
2.13.1.1-1 Tools for mounting
and manipulating filesystems
ii nano
2.0.7-5 free Pico clone
with some new features
ii ncurses-base
5.7+20081213-1 basic terminal
type definitions
ii ncurses-bin
5.7+20081213-1 terminal-related
programs and man pages
ii net-tools
1.60-22 The NET-3
networking toolkit
ii netbase
4.34 Basic TCP/IP
networking system
ii netcat-traditional
1.10-38 TCP/IP swiss army
knife
ii ntp
1:4.2.4p4+dfsg-8lenny3 Network Time
Protocol daemon and utility programs
ii ntpdate
1:4.2.4p4+dfsg-8lenny3 client for setting
system time from NTP servers
ii openssh-blacklist
0.4.1 list of default
blacklisted OpenSSH RSA and DSA keys
ii openssh-client
1:5.1p1-5 secure shell
client, an rlogin/rsh/rcp replacement
ii openssh-server
1:5.1p1-5 secure shell
server, an rshd replacement
ii openssl
0.9.8g-15+lenny7 Secure Socket
Layer (SSL) binary and related cryptographic tools
ii passwd
1:4.1.1-6+lenny1 change and
administer password and group data
ii pciutils
1:3.0.0-6 Linux PCI Utilities
ii perl
5.10.0-19lenny2 Larry Wall's
Practical Extraction and Report Language
ii perl-base
5.10.0-19lenny2 minimal Perl system
ii perl-doc
5.10.0-19lenny2 Perl documentation
ii perl-modules
5.10.0-19lenny2 Core Perl modules
ii php5-cli
5.2.14-0.dotdeb.0 command-line
interpreter for the php5 scripting language
ii php5-common
5.2.14-0.dotdeb.0 Common files for
packages built from the php5 source
ii php5-curl
5.2.14-0.dotdeb.0 CURL module for php5
ii php5-sqlite
5.2.14-0.dotdeb.0 SQLite module for php5
ii procps
1:3.2.7-11 /proc file system
utilities
ii psmisc
22.6-1 Utilities that use
the proc filesystem
ii python
2.5.2-3 An interactive
high-level object-oriented language (default version)
ii python-central
0.6.8 register and build
utility for Python packages
ii python-minimal
2.5.2-3 A minimal subset
of the Python language (default version)
ii python2.5
2.5.2-15+lenny1 An interactive
high-level object-oriented language (version 2.5)
ii python2.5-minimal
2.5.2-15+lenny1 A minimal subset
of the Python language (version 2.5)
ii readline-common
5.2-3.1 GNU readline and
history libraries, common files
ii reiserfsprogs
1:3.6.19-6 User-level tools
for ReiserFS filesystems
ii rinse
1.3-2 RPM installation
environment
ii rpm
4.4.2.3-1 Red Hat package
manager
ii rsync
3.0.3-2 fast remote file
copy program (like rcp)
ii rsyslog
3.18.6-4 enhanced
multi-threaded syslogd
ii screen
4.0.3-11+lenny1 terminal
multiplexor with VT100/ANSI terminal emulation
ii sed
4.1.5-6 The GNU sed stream
editor
ii sgml-base
1.26 SGML
infrastructure and SGML catalog file support
ii smartmontools
5.38-2+lenny1 control and
monitor storage systems using S.M.A.R.T.
ii ssh
1:5.1p1-5 secure shell
client and server (metapackage)
ii sudo
1.6.9p17-3 Provide limited
super user privileges to specific users
ii svgalibg1
1:1.4.3-27 transitional dummy
package which can be safely removed
ii sysstat
8.1.2-2 sar, iostat and
mpstat - system performance tools for Linux
ii sysv-rc
2.86.ds1-61 System-V-like
runlevel change mechanism
ii sysvinit
2.86.ds1-61 System-V-like init
utilities
ii sysvinit-utils
2.86.ds1-61 System-V-like
utilities
ii tar
1.20-1+lenny1 GNU version of the
tar archiving utility
ii tasksel
2.78 Tool for selecting
tasks for installation on Debian systems
ii tasksel-data
2.78 Official tasks
used for installation of Debian systems
ii tcpd
7.6.q-16 Wietse Venema's
TCP wrapper utilities
ii tcpdump
3.9.8-4 A powerful tool
for network monitoring and data acquisition
ii traceroute
2.0.11-2 Traces the route
taken by packets over an IPv4/IPv6 network
ii tzdata
2010j-0lenny1 time zone and
daylight-saving time data
ii ucf
3.0016 Update
Configuration File: preserve user changes to config files.
ii udev
0.125-7+lenny3 /dev/ and hotplug
management daemon
ii update-inetd
4.31 inetd
configuration file updater
ii usbutils
0.73-10lenny2 Linux USB utilities
ii util-linux
2.13.1.1-1 Miscellaneous
system utilities
ii vim
1:7.1.314-3+lenny2 Vi IMproved -
enhanced vi editor
ii vim-common
1:7.1.314-3+lenny2 Vi IMproved -
Common files
ii vim-runtime
1:7.1.314-3+lenny2 Vi IMproved -
Runtime files
ii vim-tiny
1:7.1.314-3+lenny2 Vi IMproved -
enhanced vi editor - compact version
ii vnstat
1.6-1 console-based
network traffic monitor
ii wget
1.11.4-2+lenny2 retrieves files
from the web
ii whiptail
0.52.2-11.3+lenny1 Displays
user-friendly dialog boxes from shell scripts
ii whois
4.7.30 an intelligent
whois client
ii xen-hypervisor-3.2-1-amd64
3.2.1-2 The Xen Hypervisor
on AMD64
ii xen-linux-system-2.6.26-2-xen-amd64
2.6.26-24lenny1 XEN system with
Linux 2.6.26 image on AMD64
ii xen-shell
1.8-3 Console based Xen
administration utility
ii xen-utils-3.2-1
3.2.1-2 XEN administrative
tools
ii xen-utils-common
3.2.0-2 XEN administrative
tools - common files
ii xenstore-utils
3.2.1-2 Xenstore utilities
for Xen
ii xfsprogs
2.9.8-1lenny1 Utilities for
managing the XFS filesystem
ii xml-core
0.12 XML infrastructure
and XML catalog file support
ii zlib1g
1:1.2.3.3.dfsg-12 compression
library - runtime
Please let me know if anything further is required.
Reply to: