Bug#598104: does not load i915 driver [Toshiba Satellite C650]
Package: xserver-xorg-video-intel
Version: 2:2.9.1-4
Severity: normal
I would like to add some more informartion about Toshiba Satellite C650
and it's ACPI.
When kernel is invoked with ACPI support, it has various problems with USB
detection (what you can see in dmesg - it takes almost two minutes for
computer to boot). When finally booted, at least wireless driver (ath9k)
does not work. I heard that sound does not work as well, but haven't
tested it myself. With ACPI enabled, kernel is unable to shutdown computer
properly. I have made several photos of error messages (it was when running
unofficial Liquorix kernel, but these messages are at least similar on
each kernel I have tried). You can find it at [1].
When invoked with acpi=off, USB, wireless and audio work perfectly, but ...
well, there is no support for ACPI at all, which makes laptop pretty unusable.
This is known flaw of Toshiba Satellite C650/kernel. You can find various
posts around the net about it.
Toshiba Satellite C650 comes in four variants:
PSC08E
PSC10E
PSC12E
PSC14E
Each of it comes with BIOS 1.2 from Insyde [2].
In July there was a BIOS update for 12E and 14E. The new BIOS is version 1.5
and it is said to fix ACPI issues on Linux [3]. Unfortunetly there is no new
BIOS for 08E and 10E machines.
I don't know if it matters, but in order to download a BIOS you have
to go to [4] and fill all drop-down lists respectively:
1. Notebooks
2. Satellite
3. Satellite C series
4. Satellite C650
You can also specify desired model number.
These are zipped Windows executables.
The problem affects all kernels from at least 2.6.32 (Debian's) to 2.6.35
(Liquorix and Ubuntu Maverick) [5]. I have also tested openSUSE 11.3 which
uses kernel 2.6.34 - unfortunetly with no luck.
It may be worth noting that on Ubuntu Maverick's kernel (2.6.35-22-generic) [6]
(I have installed it on my Debian machine just for test purposes), i915 intel
driver loads properly even when kernel is ionvoked with acpi=off option.
Compiz works flawlessly then.
There are some Toshiba-related patches on that kernel [7]. Although I
don't see anything about Toshiba Satellite C650 there, maybe something
there fix video-driver problem. ACPI on that kernel does not work.
I'm also attaching dmesg and Xorg.log for Debian run with Ubuntu kernel with
ACPI enabled.
Hope you find any of these informations useful.
[1] - http://minio.komunikatory.pl/pliki/toshiba-acpi-errors.tar.bz2 (18 MB)
[2] - http://insydesw.com/
[3] - http://ubuntuforums.org/showthread.php?p=9622930#post9622930
[4] - http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp
[5] - https://bugs.launchpad.net/ubuntu/+bug/636178
[6] - http://packages.ubuntu.com/hu/maverick/amd64/linux-image-2.6.35-22-generic
[7] - http://archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_2.6.35-22.33.diff.gz
*** Xorg.0.log
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.21-dsa-amd64 x86_64 Debian
Current Operating System: Linux pingwin 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-22-generic root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro quiet
Build Date: 08 September 2010 06:38:08PM
xorg-server 2:1.7.7-6 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 28 17:27:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "card0"
(**) Option "DontZap" "off"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "DRI2" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c5480
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:1179:fde0 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005110/8
(--) PCI: (0:0:2:1) 8086:2a43:1179:fde0 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 using monitor section Generic Monitor
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LGD Model: 230 Serial#: 0
(II) intel(0): Year: 2009 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.622 redY: 0.365 greenX: 0.340 greenY: 0.607
(II) intel(0): blueX: 0.145 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
(II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
(II) intel(0): LG Display
(II) intel(0): Monitor name: LP156WH2-TLAA
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0030e4300200000000
(II) intel(0): 00130103802213780a62259f5d579b25
(II) intel(0): 19505400000001010101010101010101
(II) intel(0): 0101010101013e1c56a0500016303020
(II) intel(0): 350058c2100000190000000000000000
(II) intel(0): 00000000000000000000000000fe004c
(II) intel(0): 4720446973706c61790a2020000000fc
(II) intel(0): 004c503135365748322d544c41410038
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "UseEvents" is not used
(WW) intel(0): Option "AccelMethod" is not used
(WW) intel(0): Option "MigrationHeuristic" is not used
(WW) intel(0): Option "ExaNoComposite" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event2"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event3)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event3"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
*** dmesg-2.6.35-ubuntu
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.35-22-generic root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c80000 (usable)
[ 0.000000] BIOS-e820: 00000000b7c80000 - 00000000b7cbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cec000 (usable)
[ 0.000000] BIOS-e820: 00000000b7cec000 - 00000000b7cff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
[ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 0B7D00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b7b6c000 (usable)
[ 0.000000] modified: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
[ 0.000000] modified: 00000000b7bbf000 - 00000000b7c80000 (usable)
[ 0.000000] modified: 00000000b7c80000 - 00000000b7cbf000 (ACPI NVS)
[ 0.000000] modified: 00000000b7cbf000 - 00000000b7cec000 (usable)
[ 0.000000] modified: 00000000b7cec000 - 00000000b7cff000 (ACPI data)
[ 0.000000] modified: 00000000b7cff000 - 00000000b7d00000 (usable)
[ 0.000000] modified: 00000000b7d00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b7d00000
[ 0.000000] 0000000000 - 00b7c00000 page 2M
[ 0.000000] 00b7c00000 - 00b7d00000 page 4k
[ 0.000000] kernel direct mapping tables up to b7d00000 @ 16000-1b000
[ 0.000000] RAMDISK: 37615000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV)
[ 0.000000] ACPI: XSDT 00000000b7cfe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000b7cfd000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000b7cef000 094DE (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000b7c93000 00040
[ 0.000000] ACPI: HPET 00000000b7cfc000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000b7cfb000 0006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000b7cfa000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000b7cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000b7cee000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000b7ced000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000b7cec000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000b7d00000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000b7d00000
[ 0.000000] NODE_DATA [0000000001d18240 - 0000000001d1d23f]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002600000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000b7b6c
[ 0.000000] 0: 0x000b7bbf -> 0x000b7c80
[ 0.000000] 0: 0x000b7cbf -> 0x000b7cec
[ 0.000000] 0: 0x000b7cff -> 0x000b7d00
[ 0.000000] On node 0 totalpages: 752617
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3926 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10238 pages used for memmap
[ 0.000000] DMA32 zone: 738397 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [19000 - 197ff]
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b7b6c000 - 00000000b7bbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7c80000 - 00000000b7cbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7cec000 - 00000000b7cff000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff]
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 742323
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-22-generic root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (57 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037615000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [000009e000 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001d18000 - 0001d18210] BRK
[ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #7 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #8 [0001d18240 - 0001d1d240] NODE_DATA
[ 0.000000] #9 [0001d1d240 - 0001d1e240] BOOTMEM
[ 0.000000] #10 [0001d17140 - 0001d17368] BOOTMEM
[ 0.000000] #11 [000251f000 - 0002520000] BOOTMEM
[ 0.000000] #12 [0002520000 - 0002521000] BOOTMEM
[ 0.000000] #13 [0002600000 - 0005000000] MEMMAP 0
[ 0.000000] #14 [0001d17380 - 0001d17500] BOOTMEM
[ 0.000000] #15 [0001d1e240 - 0001d36240] BOOTMEM
[ 0.000000] #16 [0001d37000 - 0001d38000] BOOTMEM
[ 0.000000] #17 [0001d17500 - 0001d17541] BOOTMEM
[ 0.000000] #18 [0001d17580 - 0001d175c3] BOOTMEM
[ 0.000000] #19 [0001d17600 - 0001d17a28] BOOTMEM
[ 0.000000] #20 [0001d17a40 - 0001d17aa8] BOOTMEM
[ 0.000000] #21 [0001d17ac0 - 0001d17b28] BOOTMEM
[ 0.000000] #22 [0001d17b40 - 0001d17ba8] BOOTMEM
[ 0.000000] #23 [0001d17bc0 - 0001d17c28] BOOTMEM
[ 0.000000] #24 [0001d17c40 - 0001d17ca8] BOOTMEM
[ 0.000000] #25 [0001d17cc0 - 0001d17d28] BOOTMEM
[ 0.000000] #26 [0001d17d40 - 0001d17da8] BOOTMEM
[ 0.000000] #27 [0001d17dc0 - 0001d17e28] BOOTMEM
[ 0.000000] #28 [0001d17e40 - 0001d17ea8] BOOTMEM
[ 0.000000] #29 [0001d17ec0 - 0001d17f28] BOOTMEM
[ 0.000000] #30 [0001d17f40 - 0001d17fa8] BOOTMEM
[ 0.000000] #31 [0001d36240 - 0001d362a8] BOOTMEM
[ 0.000000] #32 [0001d362c0 - 0001d36328] BOOTMEM
[ 0.000000] #33 [0001d36340 - 0001d363a8] BOOTMEM
[ 0.000000] #34 [0001d363c0 - 0001d36428] BOOTMEM
[ 0.000000] #35 [0001d36440 - 0001d364a8] BOOTMEM
[ 0.000000] #36 [0001d364c0 - 0001d36528] BOOTMEM
[ 0.000000] #37 [0001d36540 - 0001d365a8] BOOTMEM
[ 0.000000] #38 [0001d17fc0 - 0001d17fe0] BOOTMEM
[ 0.000000] #39 [0001d365c0 - 0001d365e0] BOOTMEM
[ 0.000000] #40 [0001d36600 - 0001d36620] BOOTMEM
[ 0.000000] #41 [0001d36640 - 0001d36660] BOOTMEM
[ 0.000000] #42 [0001d36680 - 0001d366de] BOOTMEM
[ 0.000000] #43 [0001d36700 - 0001d3675e] BOOTMEM
[ 0.000000] #44 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #45 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #46 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #47 [0001f80000 - 0001f9e000] BOOTMEM
[ 0.000000] #48 [0001d36780 - 0001d36788] BOOTMEM
[ 0.000000] #49 [0001d367c0 - 0001d367c8] BOOTMEM
[ 0.000000] #50 [0001d36800 - 0001d36810] BOOTMEM
[ 0.000000] #51 [0001d36840 - 0001d36860] BOOTMEM
[ 0.000000] #52 [0001d36880 - 0001d369b0] BOOTMEM
[ 0.000000] #53 [0001d369c0 - 0001d36a10] BOOTMEM
[ 0.000000] #54 [0001d36a40 - 0001d36a90] BOOTMEM
[ 0.000000] #55 [0001d38000 - 0001d40000] BOOTMEM
[ 0.000000] #56 [0001d36ac0 - 0001d36d00] BOOTMEM
[ 0.000000] Memory: 2943276k/3011584k available (5708k kernel code, 1116k absent, 67192k reserved, 5382k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 30146560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2294.061 MHz processor.
[ 0.010010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.12 BogoMIPS (lpj=22940610)
[ 0.010014] pid_max: default: 32768 minimum: 301
[ 0.010038] Security Framework initialized
[ 0.010058] AppArmor: AppArmor initialized
[ 0.010060] Yama: becoming mindful.
[ 0.010477] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012935] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014091] Mount-cache hash table entries: 256
[ 0.014252] Initializing cgroup subsys ns
[ 0.014260] Initializing cgroup subsys cpuacct
[ 0.014264] Initializing cgroup subsys memory
[ 0.014272] Initializing cgroup subsys devices
[ 0.014275] Initializing cgroup subsys freezer
[ 0.014277] Initializing cgroup subsys net_cls
[ 0.014311] CPU: Physical Processor ID: 0
[ 0.014312] CPU: Processor Core ID: 0
[ 0.014315] mce: CPU supports 6 MCE banks
[ 0.014323] CPU0: Thermal monitoring enabled (TM2)
[ 0.014328] using mwait in idle threads.
[ 0.014330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.014338] ... version: 2
[ 0.014339] ... bit width: 40
[ 0.014341] ... generic registers: 2
[ 0.014342] ... value mask: 000000ffffffffff
[ 0.014344] ... max period: 000000007fffffff
[ 0.014345] ... fixed-purpose events: 3
[ 0.014347] ... event mask: 0000000700000003
[ 0.020027] ACPI: Core revision 20100428
[ 0.040011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040016] ftrace: allocating 22680 entries in 89 pages
[ 0.050062] Setting APIC routing to flat
[ 0.050413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157636] CPU0: Intel Pentium(R) Dual-Core CPU T4500 @ 2.30GHz stepping 0a
[ 0.160000] Booting Node 0, Processors #1
[ 0.320016] Brought up 2 CPUs
[ 0.320020] Total of 2 processors activated (9176.60 BogoMIPS).
[ 0.320422] devtmpfs: initialized
[ 0.320678] regulator: core version 0.5
[ 0.320707] Time: 17:26:59 Date: 09/28/10
[ 0.320747] NET: Registered protocol family 16
[ 0.320774] Trying to unpack rootfs image as initramfs...
[ 0.320888] ACPI: bus type pci registered
[ 0.320964] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.320967] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.332396] PCI: Using configuration type 1 for base access
[ 0.340151] bio: create slab <bio-0> at 0
[ 0.342305] ACPI: EC: Look up EC in DSDT
[ 0.344565] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.346535] ACPI: BIOS _OSI(Linux) query ignored
[ 0.380011] ACPI Error (psargs-0359): [IF1] Namespace lookup failure, AE_NOT_FOUND
[ 0.380017] ACPI Error (psparse-0537): Method parse/execution failed [\FLNK] (Node ffff8800b3c3bc40), AE_NOT_FOUND
[ 0.380056] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.LREG] (Node ffff8800b3c434e0), AE_NOT_FOUND
[ 0.380097] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._INI] (Node ffff8800b3c3aa80), AE_NOT_FOUND
[ 0.380150] ACPI Error: The DSDT has been corrupted or replaced - old, new headers below (20100428/tbutils-372)
[ 0.380155] ACPI: DSDT (null) 094DE (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.380161] ACPI: DSDT (null) 0555C (v01 TOSINV TOSINV00 00000001 INTL 20051117)
[ 0.380165] ACPI Error: Please send DMI info to linux-acpi@vger.kernel.org
[ 0.380167] If system does not work as expected, please boot with acpi=copy_dsdt (20100428/tbutils-378)
[ 0.380274] ACPI Error (psargs-0359): [ID A] Namespace lookup failure, AE_NOT_FOUND
[ 0.380279] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.P32_._PRW] (Node ffff8800b3c42320), AE_NOT_FOUND
[ 0.380450] ACPI Warning for \_SB_.PCI0.AZAL._PRW: Return type mismatch - found Integer, expected Package (20100428/nspredef-1053)
[ 0.380456] ACPI Error (uteval-0307): Return object type is incorrect [\_SB_.PCI0.AZAL._PRW] (Node ffff8800b3c463c0), AE_TYPE
[ 0.380464] ACPI Error: Type returned from (null) was incorrect: Integer, expected Btypes: 0x8 (20100428/uteval-313)
[ 0.381314] ACPI Error (psargs-0359): [GPRW] Namespace lookup failure, AE_NOT_FOUND
[ 0.381320] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L16] (Node ffff8800b3c3a260), AE_NOT_FOUND
[ 0.381373] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L16] (20100428/evgpe-395)
[ 0.381366] ACPI: SSDT 00000000b7b77c98 00229 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.382355] ACPI Error (psargs-0359): [GPRW] Namespace lookup failure, AE_NOT_FOUND
[ 0.382361] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L16] (Node ffff8800b3c3a260), AE_NOT_FOUND
[ 0.382411] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L16] (20100428/evgpe-395)
[ 0.382404] ACPI: Dynamic OEM Table Load:
[ 0.382404] ACPI: SSDT (null) 00229 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.390256] ACPI: SSDT 00000000b7b75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.390792] ACPI: Dynamic OEM Table Load:
[ 0.390795] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.391402] ACPI: SSDT 00000000b7b76e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.391972] ACPI: Dynamic OEM Table Load:
[ 0.391975] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.392188] ACPI: SSDT 00000000b7b77f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.392736] ACPI: Dynamic OEM Table Load:
[ 0.392739] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.392911] ACPI: Interpreter enabled
[ 0.392915] ACPI: (supports S0 S3 S4 S5)
[ 0.392951] ACPI: Using IOAPIC for interrupt routing
[ 0.392962] ACPI Error: Null stack entry at ffff8800b3960260 (20100428/exresop-175)
[ 0.392967] ACPI Error (psparse-0537): Method parse/execution failed [\_PIC] (Node ffff8800b3c3a280), AE_AML_INTERNAL
[ 0.393007] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20100428/bus-824)
[ 0.395939] =============================================================================
[ 0.395942] BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
[ 0.395944] -----------------------------------------------------------------------------
[ 0.395945]
[ 0.395947] INFO: Slab 0xffffea0002745df8 objects=56 used=1 fp=0xffff8800b3889000 flags=0x100000000000080
[ 0.395951] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.395953] Call Trace:
[ 0.395963] [<ffffffff8113f0a1>] slab_err+0xb1/0xe0
[ 0.395966] [<ffffffff81141830>] ? flush_cpu_slab+0x0/0x90
[ 0.395971] [<ffffffff81068bc4>] ? walk_system_ram_range+0x64/0x130
[ 0.395973] [<ffffffff811439dd>] ? __kmalloc+0xfd/0x1c0
[ 0.395976] [<ffffffff81144b7d>] T.942+0x5d/0x190
[ 0.395978] [<ffffffff81144e18>] kmem_cache_destroy+0x168/0x250
[ 0.395983] [<ffffffff8130a222>] acpi_os_delete_cache+0xe/0x12
[ 0.395986] [<ffffffff8132dd6d>] acpi_ut_delete_caches+0x71/0x80
[ 0.395989] [<ffffffff8132e549>] acpi_ut_subsystem_shutdown+0x71/0x7c
[ 0.395993] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.395996] [<ffffffff8132f15b>] acpi_terminate+0x46/0x52
[ 0.395999] [<ffffffff81b1cc58>] acpi_bus_init+0x1b5/0x1de
[ 0.396002] [<ffffffff81b16116>] ? genhd_device_init+0x0/0x7b
[ 0.396004] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.396007] [<ffffffff81b1ccf2>] acpi_init+0x71/0x11c
[ 0.396011] [<ffffffff8100204c>] do_one_initcall+0x3c/0x1a0
[ 0.396017] [<ffffffff81aed70a>] do_basic_setup+0x54/0x66
[ 0.396020] [<ffffffff81aed84f>] kernel_init+0x133/0x1bd
[ 0.396024] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10
[ 0.396027] [<ffffffff81aed71c>] ? kernel_init+0x0/0x1bd
[ 0.396029] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10
[ 0.396035] INFO: Object 0xffff8800b3889288 @offset=648
[ 0.396040] SLUB Acpi-ParseExt: kmem_cache_destroy called for cache that still has objects.
[ 0.396043] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.396045] Call Trace:
[ 0.396048] [<ffffffff81144ef5>] kmem_cache_destroy+0x245/0x250
[ 0.396051] [<ffffffff8130a222>] acpi_os_delete_cache+0xe/0x12
[ 0.396054] [<ffffffff8132dd6d>] acpi_ut_delete_caches+0x71/0x80
[ 0.396056] [<ffffffff8132e549>] acpi_ut_subsystem_shutdown+0x71/0x7c
[ 0.396060] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.396062] [<ffffffff8132f15b>] acpi_terminate+0x46/0x52
[ 0.396065] [<ffffffff81b1cc58>] acpi_bus_init+0x1b5/0x1de
[ 0.396068] [<ffffffff81b16116>] ? genhd_device_init+0x0/0x7b
[ 0.396070] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.396073] [<ffffffff81b1ccf2>] acpi_init+0x71/0x11c
[ 0.396076] [<ffffffff8100204c>] do_one_initcall+0x3c/0x1a0
[ 0.396079] [<ffffffff81aed70a>] do_basic_setup+0x54/0x66
[ 0.396082] [<ffffffff81aed84f>] kernel_init+0x133/0x1bd
[ 0.396085] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10
[ 0.396088] [<ffffffff81aed71c>] ? kernel_init+0x0/0x1bd
[ 0.396090] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10
[ 0.396094] ------------[ cut here ]------------
[ 0.396099] WARNING: at /build/buildd/linux-2.6.35/lib/kobject.c:595 kobject_put+0x50/0x60()
[ 0.396101] Hardware name: Satellite C650
[ 0.396102] kobject: '(null)' (ffff8800b3c22a30): is not initialized, yet kobject_put() is being called.
[ 0.396104] Modules linked in:
[ 0.396107] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.396108] Call Trace:
[ 0.396112] [<ffffffff8106077f>] warn_slowpath_common+0x7f/0xc0
[ 0.396115] [<ffffffff81060876>] warn_slowpath_fmt+0x46/0x50
[ 0.396118] [<ffffffff8100df15>] ? show_trace+0x15/0x20
[ 0.396121] [<ffffffff812b93a0>] kobject_put+0x50/0x60
[ 0.396123] [<ffffffff81144ec8>] kmem_cache_destroy+0x218/0x250
[ 0.396126] [<ffffffff8130a222>] acpi_os_delete_cache+0xe/0x12
[ 0.396129] [<ffffffff8132dd6d>] acpi_ut_delete_caches+0x71/0x80
[ 0.396132] [<ffffffff8132e549>] acpi_ut_subsystem_shutdown+0x71/0x7c
[ 0.396135] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.396137] [<ffffffff8132f15b>] acpi_terminate+0x46/0x52
[ 0.396140] [<ffffffff81b1cc58>] acpi_bus_init+0x1b5/0x1de
[ 0.396143] [<ffffffff81b16116>] ? genhd_device_init+0x0/0x7b
[ 0.396145] [<ffffffff81b1cc81>] ? acpi_init+0x0/0x11c
[ 0.396148] [<ffffffff81b1ccf2>] acpi_init+0x71/0x11c
[ 0.396151] [<ffffffff8100204c>] do_one_initcall+0x3c/0x1a0
[ 0.396154] [<ffffffff81aed70a>] do_basic_setup+0x54/0x66
[ 0.396157] [<ffffffff81aed84f>] kernel_init+0x133/0x1bd
[ 0.396159] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10
[ 0.396162] [<ffffffff81aed71c>] ? kernel_init+0x0/0x1bd
[ 0.396164] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10
[ 0.396172] ---[ end trace 5a5d197966b56a2e ]---
[ 0.410247] vgaarb: loaded
[ 0.410385] SCSI subsystem initialized
[ 0.410394] libata version 3.00 loaded.
[ 0.410394] usbcore: registered new interface driver usbfs
[ 0.410394] usbcore: registered new interface driver hub
[ 0.410394] usbcore: registered new device driver usb
[ 0.410394] PCI: Probing PCI hardware
[ 0.410394] PCI: Probing PCI hardware (bus 00)
[ 0.410394] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.410394] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.410394] pci 0000:00:02.0: reg 20: [io 0x5110-0x5117]
[ 0.410419] pci 0000:00:02.1: reg 10: [mem 0xd3400000-0xd34fffff 64bit]
[ 0.410551] pci 0000:00:1a.0: reg 20: [io 0x50e0-0x50ff]
[ 0.410669] pci 0000:00:1a.1: reg 20: [io 0x50c0-0x50df]
[ 0.410761] pci 0000:00:1a.7: reg 10: [mem 0xd6704c00-0xd6704fff]
[ 0.410835] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.410841] pci 0000:00:1a.7: PME# disabled
[ 0.410888] pci 0000:00:1b.0: reg 10: [mem 0xd6700000-0xd6703fff 64bit]
[ 0.410946] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.410950] pci 0000:00:1b.0: PME# disabled
[ 0.411041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.411045] pci 0000:00:1c.0: PME# disabled
[ 0.411140] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.411145] pci 0000:00:1c.1: PME# disabled
[ 0.411243] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.411248] pci 0000:00:1c.4: PME# disabled
[ 0.411335] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 0.411456] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
[ 0.411576] pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
[ 0.411702] pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
[ 0.411799] pci 0000:00:1d.7: reg 10: [mem 0xd6704800-0xd6704bff]
[ 0.411872] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.411877] pci 0000:00:1d.7: PME# disabled
[ 0.412090] pci 0000:00:1f.2: reg 10: [io 0x5108-0x510f]
[ 0.412096] pci 0000:00:1f.2: reg 14: [io 0x511c-0x511f]
[ 0.412103] pci 0000:00:1f.2: reg 18: [io 0x5100-0x5107]
[ 0.412110] pci 0000:00:1f.2: reg 1c: [io 0x5118-0x511b]
[ 0.412117] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 0.412125] pci 0000:00:1f.2: reg 24: [mem 0xd6704000-0xd67047ff]
[ 0.412167] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.412172] pci 0000:00:1f.2: PME# disabled
[ 0.412208] pci 0000:00:1f.3: reg 10: [mem 0xd6705000-0xd67050ff 64bit]
[ 0.412228] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.412358] pci 0000:02:00.0: reg 10: [mem 0xd5600000-0xd563ffff 64bit]
[ 0.412368] pci 0000:02:00.0: reg 18: [io 0x3000-0x307f]
[ 0.412449] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412455] pci 0000:02:00.0: PME# disabled
[ 0.412484] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.412501] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.412506] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.412510] pci 0000:00:1c.0: bridge window [mem 0xd5600000-0xd66fffff]
[ 0.412517] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.412617] pci 0000:03:00.0: reg 10: [mem 0xd4500000-0xd450ffff 64bit]
[ 0.412697] pci 0000:03:00.0: supports D1
[ 0.412699] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.412704] pci 0000:03:00.0: PME# disabled
[ 0.430059] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.430069] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.430074] pci 0000:00:1c.1: bridge window [mem 0xd4500000-0xd55fffff]
[ 0.430081] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.430141] pci 0000:00:1c.4: PCI bridge to [bus 07-08]
[ 0.430145] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.430149] pci 0000:00:1c.4: bridge window [mem 0xd3500000-0xd44fffff]
[ 0.430157] pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.430238] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.430243] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.430248] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.430255] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.430258] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.430261] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.430356] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.430885] PCI: Discovered primary peer bus ff [IRQ]
[ 0.430904] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2919]
[ 0.430918] PCI: pci_cache_line_size set to 64 bytes
[ 0.431018] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.431020] reserve RAM buffer: 00000000b7b6c000 - 00000000b7ffffff
[ 0.431023] reserve RAM buffer: 00000000b7c80000 - 00000000b7ffffff
[ 0.431025] reserve RAM buffer: 00000000b7cec000 - 00000000b7ffffff
[ 0.431028] reserve RAM buffer: 00000000b7d00000 - 00000000b7ffffff
[ 0.431139] NetLabel: Initializing
[ 0.431141] NetLabel: domain hash size = 128
[ 0.431142] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.431156] NetLabel: unlabeled traffic allowed by default
[ 0.431198] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.431203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.431208] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.440069] Switching to clocksource tsc
[ 0.449835] AppArmor: AppArmor Filesystem Enabled
[ 0.449840] pnp: PnP ACPI: disabled
[ 0.455687] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.455693] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.455699] pci 0000:00:1c.0: bridge window [mem 0xd5600000-0xd66fffff]
[ 0.455703] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.455711] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.455714] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.455720] pci 0000:00:1c.1: bridge window [mem 0xd4500000-0xd55fffff]
[ 0.455725] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.455732] pci 0000:00:1c.4: PCI bridge to [bus 07-08]
[ 0.455735] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.455741] pci 0000:00:1c.4: bridge window [mem 0xd3500000-0xd44fffff]
[ 0.455745] pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.455753] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.455754] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.455760] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.455764] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.455782] pci 0000:00:1c.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 0.455788] pci 0000:00:1c.0: setting latency timer to 64
[ 0.455798] pci 0000:00:1c.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 0.455803] pci 0000:00:1c.1: setting latency timer to 64
[ 0.455812] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.455818] pci 0000:00:1c.4: can't find IRQ for PCI INT A; probably buggy MP table
[ 0.455824] pci 0000:00:1c.4: setting latency timer to 64
[ 0.455832] pci 0000:00:1e.0: setting latency timer to 64
[ 0.455836] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.455838] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.455841] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.455843] pci_bus 0000:02: resource 1 [mem 0xd5600000-0xd66fffff]
[ 0.455845] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.455847] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.455850] pci_bus 0000:03: resource 1 [mem 0xd4500000-0xd55fffff]
[ 0.455852] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.455854] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.455856] pci_bus 0000:07: resource 1 [mem 0xd3500000-0xd44fffff]
[ 0.455858] pci_bus 0000:07: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.455861] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.455863] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.455865] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.455867] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.455914] NET: Registered protocol family 2
[ 0.456074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.457496] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.463047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.463701] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.463704] TCP reno registered
[ 0.463719] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.463772] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.463993] NET: Registered protocol family 1
[ 0.464015] pci 0000:00:02.0: Boot video device
[ 0.582533] Freeing initrd memory: 10092k freed
[ 2.470011] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 4.470007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 4.470138] PCI: CLS 64 bytes, default 64
[ 4.470196] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 4.470198] Simple Boot Flag at 0x44 set to 0x1
[ 4.470233] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 4.470390] Scanning for low memory corruption every 60 seconds
[ 4.470542] audit: initializing netlink socket (disabled)
[ 4.470554] type=2000 audit(1285694823.470:1): initialized
[ 4.483774] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.484897] SLUB: Unable to add boot slab alias (null) to sysfs
[ 4.485081] VFS: Disk quotas dquot_6.5.2
[ 4.485137] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.485652] fuse init (API version 7.14)
[ 4.485732] msgmni has been set to 5768
[ 4.487947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.487951] io scheduler noop registered
[ 4.487952] io scheduler deadline registered
[ 4.487986] io scheduler cfq registered (default)
[ 4.488093] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.488141] alloc irq_desc for 40 on node -1
[ 4.488143] alloc kstat_irqs on node -1
[ 4.488156] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 4.488255] pcieport 0000:00:1c.1: setting latency timer to 64
[ 4.488299] alloc irq_desc for 41 on node -1
[ 4.488301] alloc kstat_irqs on node -1
[ 4.488309] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 4.488408] pcieport 0000:00:1c.4: setting latency timer to 64
[ 4.488453] alloc irq_desc for 42 on node -1
[ 4.488455] alloc kstat_irqs on node -1
[ 4.488463] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 4.488566] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.488601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.488673] intel_idle: MWAIT substates: 0x2220
[ 4.488675] intel_idle: does not run on family 6 model 23
[ 4.488810] Linux agpgart interface v0.103
[ 4.488829] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.489909] brd: module loaded
[ 4.490362] loop: module loaded
[ 4.490789] Fixed MDIO Bus: probed
[ 4.490816] PPP generic driver version 2.4.2
[ 4.490849] tun: Universal TUN/TAP device driver, 1.6
[ 4.490851] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.490918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.490942] ehci_hcd 0000:00:1a.7: can't find IRQ for PCI INT D; probably buggy MP table
[ 4.490959] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.490963] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.490993] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.491028] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.494926] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4.494942] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xd6704c00
[ 4.511276] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.511387] hub 1-0:1.0: USB hub found
[ 4.511392] hub 1-0:1.0: 4 ports detected
[ 4.511458] ehci_hcd 0000:00:1d.7: can't find IRQ for PCI INT A; probably buggy MP table
[ 4.511469] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.511472] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.511513] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.511541] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.515435] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.515440] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd6704800
[ 4.531258] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.531347] hub 2-0:1.0: USB hub found
[ 4.531350] hub 2-0:1.0: 8 ports detected
[ 4.531421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.531434] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.531486] uhci_hcd 0000:00:1a.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 4.531493] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.531497] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.531540] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.531569] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000050e0
[ 4.531673] hub 3-0:1.0: USB hub found
[ 4.531677] hub 3-0:1.0: 2 ports detected
[ 4.531737] uhci_hcd 0000:00:1a.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 4.531743] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.531747] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.531776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.531812] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000050c0
[ 4.531914] hub 4-0:1.0: USB hub found
[ 4.531918] hub 4-0:1.0: 2 ports detected
[ 4.531975] uhci_hcd 0000:00:1d.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 4.531983] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.531987] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.532015] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.532042] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000050a0
[ 4.532147] hub 5-0:1.0: USB hub found
[ 4.532151] hub 5-0:1.0: 2 ports detected
[ 4.532207] uhci_hcd 0000:00:1d.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 4.532213] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.532216] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.532251] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.532279] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00005080
[ 4.532393] hub 6-0:1.0: USB hub found
[ 4.532397] hub 6-0:1.0: 2 ports detected
[ 4.532454] uhci_hcd 0000:00:1d.2: can't find IRQ for PCI INT D; probably buggy MP table
[ 4.532460] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.532464] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.532493] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.532520] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00005060
[ 4.532629] hub 7-0:1.0: USB hub found
[ 4.532633] hub 7-0:1.0: 2 ports detected
[ 4.532689] uhci_hcd 0000:00:1d.3: can't find IRQ for PCI INT C; probably buggy MP table
[ 4.532696] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.532699] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.532729] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.532756] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00005040
[ 4.532867] hub 8-0:1.0: USB hub found
[ 4.532871] hub 8-0:1.0: 2 ports detected
[ 4.532951] PNP: No PS/2 controller found. Probing ports directly.
[ 4.560532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.560538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.560603] mice: PS/2 mouse device common for all mice
[ 4.560682] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 4.560714] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 4.560806] device-mapper: uevent: version 1.0.3
[ 4.560891] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.560954] device-mapper: multipath: version 1.1.1 loaded
[ 4.560957] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.561086] cpuidle: using governor ladder
[ 4.561088] cpuidle: using governor menu
[ 4.561332] TCP cubic registered
[ 4.561443] NET: Registered protocol family 10
[ 4.561774] lo: Disabled Privacy Extensions
[ 4.561940] NET: Registered protocol family 17
[ 4.562055] PM: Resume from disk failed.
[ 4.562066] registered taskstats version 1
[ 4.562377] Magic number: 10:301:442
[ 4.562458] rtc_cmos rtc_cmos: setting system clock to 2010-09-28 17:27:04 UTC (1285694824)
[ 4.562461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.562463] EDD information not available.
[ 4.562555] Freeing unused kernel memory: 908k freed
[ 4.562841] Write protecting the kernel read-only data: 10240k
[ 4.563010] Freeing unused kernel memory: 416k freed
[ 4.563315] Freeing unused kernel memory: 1644k freed
[ 4.579332] udev: starting version 160
[ 4.592727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.632157] atl1c 0000:02:00.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 4.632172] atl1c 0000:02:00.0: setting latency timer to 64
[ 4.649435] ahci 0000:00:1f.2: version 3.0
[ 4.649453] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; probably buggy MP table
[ 4.649498] alloc irq_desc for 43 on node -1
[ 4.649500] alloc kstat_irqs on node -1
[ 4.649513] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 4.649607] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.649611] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[ 4.649616] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.650300] scsi0 : ahci
[ 4.650441] scsi1 : ahci
[ 4.650509] scsi2 : ahci
[ 4.650573] scsi3 : ahci
[ 4.650632] scsi4 : ahci
[ 4.650693] scsi5 : ahci
[ 4.650741] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 43
[ 4.650745] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 43
[ 4.650747] ata3: DUMMY
[ 4.650748] ata4: DUMMY
[ 4.650751] ata5: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704300 irq 43
[ 4.650755] ata6: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704380 irq 43
[ 4.810662] atl1c 0000:02:00.0: version 1.0.0.2-NAPI
[ 4.840016] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 5.000038] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.000076] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.180025] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.180042] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.200832] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
[ 5.221147] ata6.00: configured for UDMA/100
[ 5.229349] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ003M, max UDMA/100
[ 5.229352] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.230064] ata2.00: configured for UDMA/100
[ 5.230176] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
[ 5.230321] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.230338] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.230370] sd 1:0:0:0: [sda] Write Protect is off
[ 5.230372] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.230397] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.230547] sda:
[ 5.232324] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
[ 5.237109] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.237112] Uniform CD-ROM driver Revision: 3.20
[ 5.237215] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.237281] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 5.281655] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 5.341833] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.255166] PM: Starting manual resume from disk
[ 6.255171] PM: Resume from partition 8:6
[ 6.255173] PM: Checking hibernation image.
[ 6.255312] PM: Error -22 checking image file
[ 6.255314] PM: Resume from disk failed.
[ 6.325033] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.840017] ehci_hcd 0000:00:1a.7: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 10.902013] udev: starting version 160
[ 11.418381] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 11.419365] agpgart-intel 0000:00:00.0: detected 131068K stolen memory, trimming to 32768K
[ 11.424880] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 11.446633] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 11.516391] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT C; probably buggy MP table
[ 11.573215] cfg80211: Calling CRDA to update world regulatory domain
[ 11.664154] HDA Intel 0000:00:1b.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 11.664209] alloc irq_desc for 44 on node -1
[ 11.664211] alloc kstat_irqs on node -1
[ 11.664226] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 11.664260] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.877414] [drm] Initialized drm 1.1.0 20060810
[ 11.880701] cfg80211: World regulatory domain updated:
[ 11.880705] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.880708] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.880710] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.880713] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.880715] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.880717] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.057759] i915 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 12.057765] i915 0000:00:02.0: setting latency timer to 64
[ 12.123786] [drm] detected 127M stolen memory, trimming to 32M
[ 12.123859] alloc irq_desc for 45 on node -1
[ 12.123862] alloc kstat_irqs on node -1
[ 12.123871] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 12.123887] [drm] set up 32M of stolen space
[ 12.124025] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000
[ 12.124030] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
[ 12.144295] ath9k 0000:03:00.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 12.144322] ath9k 0000:03:00.0: setting latency timer to 64
[ 12.197341] ath: EEPROM regdomain: 0x65
[ 12.197344] ath: EEPROM indicates we should expect a direct regpair map
[ 12.197347] ath: Country alpha2 being used: 00
[ 12.197349] ath: Regpair used: 0x65
[ 12.236059] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.336791] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 12.336795] synaptics: Toshiba Satellite C650 detected, limiting rate to 40pps.
[ 12.396905] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 12.581271] Skipping EDID probe due to cached edid
[ 12.688183] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 12.688732] Registered led device: ath9k-phy0::radio
[ 12.688748] Registered led device: ath9k-phy0::assoc
[ 12.688764] Registered led device: ath9k-phy0::tx
[ 12.688783] Registered led device: ath9k-phy0::rx
[ 12.688790] phy0: Atheros AR9285 Rev:2 mem=0xffffc900061e0000, irq=11
[ 13.072818] Console: switching to colour frame buffer device 170x48
[ 13.075418] fb0: inteldrmfb frame buffer device
[ 13.075419] drm: registered panic notifier
[ 13.075423] Slow work thread pool: Starting up
[ 13.075478] Slow work thread pool: Ready
[ 13.075570] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.318644] Adding 3317384k swap on /dev/sda6. Priority:-1 extents:1 across:3317384k
[ 13.323077] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 13.691662] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 14.632414] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 14.931756] alloc irq_desc for 46 on node -1
[ 14.931760] alloc kstat_irqs on node -1
[ 14.931778] atl1c 0000:02:00.0: irq 46 for MSI/MSI-X
[ 14.931894] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 15.330782] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input3
[ 15.968195] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.410015] usb 1-2: device not accepting address 2, error -110
[ 20.530018] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 25.270014] eth0: no IPv6 routers present
[ 26.471287] Skipping EDID probe due to cached edid
[ 26.930031] Skipping EDID probe due to cached edid
[ 36.100019] usb 1-2: device not accepting address 3, error -110
[ 36.220012] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 46.660016] usb 1-2: device not accepting address 4, error -110
[ 46.780018] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 57.220020] usb 1-2: device not accepting address 5, error -110
[ 57.220039] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 57.380018] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 72.950021] usb 1-3: device not accepting address 6, error -110
[ 73.070013] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 88.640012] usb 1-3: device not accepting address 7, error -110
[ 88.760014] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 99.200012] usb 1-3: device not accepting address 8, error -110
[ 99.320015] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 109.760021] usb 1-3: device not accepting address 9, error -110
[ 109.760038] hub 1-0:1.0: unable to enumerate USB device on port 3
Reply to: