Bug#566019: linux-image-2.6.32-trunk-amd64: Debian does not wake up after standby
Package: linux-2.6
Version: 2.6.32-5
Severity: important
I i try to wake the computer up from standy, i just get a black screen.
No keyboard inputs have any affect.
Ping from other computers get an timeout.
I looked at /var/log/messages var/log/syslog and /var/log/pm-suspend.log and could not find any error.
The logs are in an pastebin here: https://debianforum.de/forum/pastebin.php?mode=view&s=34165
Sometimes the wakeup from standby works. It's kinda random, atleast i can't see any patterns.
I use Debian testing with the kernel from Unstable.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/eins-root ro quiet fastboot pci=use_crs
** Not tainted
** Kernel log:
[ 35.426222] [drm] Initialized drm 1.1.0 20060810
[ 35.554798] [drm] radeon defaulting to userspace modesetting.
[ 35.555789] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 36.003656] [drm] Setting GART location based on new memory map
[ 36.005515] [drm] Loading R300 Microcode
[ 36.005544] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 36.100418] [drm] Num pipes: 1
[ 36.100432] [drm] writeback test succeeded in 1 usecs
[ 48.808953] [drm] Num pipes: 1
[ 48.878795] mtrr: MTRR 4 not used
[ 49.053731] [drm] Setting GART location based on new memory map
[ 49.054743] [drm] Loading R300 Microcode
[ 49.054757] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 49.072890] [drm] Num pipes: 1
[ 49.072904] [drm] writeback test succeeded in 0 usecs
[ 235.120784] r8169: eth0: link up
[ 235.120815] r8169: eth0: link up
[ 245.556035] eth0: no IPv6 routers present
[ 694.896976] r8169: eth0: link down
[ 697.481371] r8169: eth0: link up
[ 5298.893610] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 5298.893621] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 5298.894843] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 5298.894851] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 5316.643566] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 5316.643577] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 5316.644774] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 5316.644783] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 6897.576900] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 6897.576910] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 6897.578160] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 6897.578170] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 6911.466917] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 6911.466927] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 6911.468179] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 6911.468186] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7217.564103] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 7217.564114] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 7217.565355] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 7217.565364] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 7244.867473] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 7244.867484] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7244.868706] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 7244.868715] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7804.195449] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 7804.195459] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 7804.196686] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 7804.196693] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 7939.261008] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 7939.261019] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 7939.262259] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 7939.262268] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 8074.306994] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 8074.307005] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 8074.308253] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 8074.308261] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 8554.635489] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 8554.635499] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 8554.639192] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 8554.639202] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[10431.218013] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[10431.218024] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[10431.219250] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[10431.219257] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[10566.282598] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[10566.282609] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[10566.283835] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[10566.283844] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[10670.976235] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[10670.976246] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[10670.977464] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[10670.977472] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[11258.032217] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[11258.032228] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11258.033472] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[11258.033481] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11393.093290] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[11393.093300] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11393.094526] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[11393.094533] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11415.341925] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[11415.341936] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[11415.345548] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[11415.345557] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[11687.587206] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[11687.587217] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11687.588452] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[11687.588459] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11822.650535] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[11822.650546] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11822.651769] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[11822.651776] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11957.697505] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[11957.697516] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[11957.698742] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[11957.698751] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[12243.823714] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[12243.823725] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[12243.824948] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[12243.824956] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
** Model information
sys_vendor: Notebook
product_name: SAM2010
product_version: 1058
chassis_vendor: MICRO-STAR INT'L CO.,LTD.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: A1058AM7 V7.23
board_vendor: MEDION
board_name: SAM2010
board_version:
** Loaded modules:
Module Size Used by
radeon 449055 2
ttm 31484 1 radeon
drm_kms_helper 18883 1 radeon
drm 137190 5 radeon,ttm,drm_kms_helper
agpgart 24733 2 ttm,drm
i2c_algo_bit 4225 1 radeon
powernow_k8 10898 1
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
ext2 52969 1
loop 11767 0
firewire_sbp2 11450 0
snd_hda_codec_realtek 235095 1
snd_hda_intel 18147 2
arc4 1274 2
snd_hda_codec 54212 2 snd_hda_codec_realtek,snd_hda_intel
ecb 1841 2
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32399 0
rt61pci 17620 0
snd_mixer_oss 12606 1 snd_pcm_oss
rt2x00pci 4605 1 rt61pci
rt2x00lib 21746 2 rt61pci,rt2x00pci
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4208 0
snd_rawmidi 15291 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event
mac80211 135407 2 rt2x00pci,rt2x00lib
snd_timer 15502 2 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
joydev 8411 0
cfg80211 101253 2 rt2x00lib,mac80211
rfkill 12996 1 cfg80211
snd 44718 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
eeprom_93cx6 1335 1 rt61pci
serio_raw 3752 0
i2c_piix4 8328 0
soundcore 4598 1 snd
i2c_core 15584 4 radeon,drm,i2c_algo_bit,i2c_piix4
edac_core 29245 0
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
psmouse 49521 0
pcspkr 1699 0
evdev 7336 19
k8temp 3139 0
battery 4998 0
ac 2192 0
edac_mce_amd 6353 0
processor 29479 1 powernow_k8
shpchp 25928 0
pci_hotplug 21171 1 shpchp
ext4 285067 2
mbcache 4970 2 ext2,ext4
jbd2 66855 1 ext4
crc16 1319 1 ext4
sha256_generic 8692 2
cryptd 5366 0
aes_x86_64 7340 2
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10507 1
dm_mod 53658 12 dm_crypt
ide_cd_mod 24744 0
cdrom 29399 1 ide_cd_mod
sd_mod 29673 3
crc_t10dif 1276 1 sd_mod
ide_pci_generic 2788 0
ohci_hcd 19196 0
ata_generic 2983 0
video 17445 0
sata_sil 7412 2
sdhci_pci 5565 0
sdhci 13966 1 sdhci_pci
libata 131655 2 ata_generic,sata_sil
ehci_hcd 30578 0
output 1692 1 video
mmc_core 45456 1 sdhci
led_class 2401 2 rt2x00lib,sdhci
firewire_ohci 19452 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 2 rt61pci,firewire_core
r8169 28765 0
mii 3210 1 r8169
atiixp 2476 0
ide_core 76802 3 ide_cd_mod,ide_pci_generic,atiixp
usbcore 121687 3 ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 121909 3 firewire_sbp2,sd_mod,libata
button 4634 0
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
Subsystem: ATI Technologies Inc RS480 Host Bridge [1002:5950]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: ff200000-ff2fffff
Prefetchable memory behind bridge: 00000000cdf00000-00000000ddefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ff300000-ffafffff
Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: ffb00000-ffbfffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at ffeffc00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at ffe00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ffefe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ffefd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ffefc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 83)
Subsystem: Micro-Star International Co., Ltd. Device [1462:a422]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at 000a0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:a422]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at ffef8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: 80200000-802fffff
Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:a422]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 6800 [size=256]
Region 2: Memory at ff2f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff2c0000 [disabled] [size=128K]
Capabilities: <access denied>
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:a422]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8800 [size=256]
Region 2: Memory at ffbff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ffbc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:04.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 80208000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at 8020a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:04.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0581]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 8020a800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
05:04.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0581]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 7
Region 0: Memory at 80209000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
05:09.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
Subsystem: Micro-Star International Co., Ltd. Device [1462:b833]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-1 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.21 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.18 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
Reply to: