Bug#548745: linux-image-2.6.30-1-686: Edgeport firmware fails to load.
Package: linux-image-2.6.30-1-686
Version: 2.6.30-6
Severity: normal
I recently upgraded my kernel from 2.6.26-2-686 to 2.6.30-1-686 and my
Edgeport
8 port adapter converter stopped working. The attached kernel log shows
the problem:
[ 5972.079534] usb 1-1.6: firmware: requesting edgeport/down.fw
[ 5972.109562] Failed to load image "edgeport/down.fw" err -2
[ 5972.109574] usb 1-1.6: firmware: requesting edgeport/boot.fw
[ 5972.147206] Failed to load image "edgeport/boot.fw" err -2
My kermrc files no longer work and kermit pauses for a while then gives
me the
following error when I attempt to SET LINE:
(/home/nathan/uboot/) C-Kermit>SET LINE /dev/ttyUSB7
/dev/ttyUSB7
Sorry, can't open connection: /dev/ttyUSB7
Running locate down.fw and boot.fw yields nothing, but I guess that's
okay
since I still have 2.6.26-2-686 installed and it still seems to work.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-6) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009
** Command line:
root=/dev/mapper/whiskers-root ro quiet
** Not tainted
** Kernel log:
[ 4036.907260] Failed to load image "edgeport/boot.fw" err -2
[ 4036.907434] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB3
[ 4036.907508] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB4
[ 4036.907575] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB5
[ 4036.907643] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB6
[ 4036.907713] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB7
[ 4036.907782] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB8
[ 4036.907927] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB9
[ 4036.908059] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB10
[ 4036.981698] usb 1-1.6: new full speed USB device using uhci_hcd and
address 8
[ 4037.128110] usb 1-1.6: New USB device found, idVendor=1608,
idProduct=0012
[ 4037.128117] usb 1-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=5
[ 4037.128123] usb 1-1.6: Product: Edgeport/416
[ 4037.128127] usb 1-1.6: Manufacturer: Inside Out Networks
[ 4037.128131] usb 1-1.6: SerialNumber: V24652120-1
[ 4037.128336] usb 1-1.6: configuration #1 chosen from 1 choice
[ 4037.138381] io_edgeport 1-1.6:1.0: Edgeport 8 port adapter converter
detected
[ 4037.144946] usb 1-1.6: Inside Out Networks Edgeport/416 detected
[ 4037.179651] usb 1-1.6: firmware: requesting edgeport/down.fw
[ 4037.395165] Failed to load image "edgeport/down.fw" err -2
[ 4037.395177] usb 1-1.6: firmware: requesting edgeport/boot.fw
[ 4037.428517] Failed to load image "edgeport/boot.fw" err -2
[ 4037.428701] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB11
[ 4037.428776] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB12
[ 4037.428850] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB13
[ 4037.428920] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB14
[ 4037.428992] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB15
[ 4037.429064] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB16
[ 4037.429135] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB17
[ 4037.429207] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB18
[ 5968.784075] usb 1-1: USB disconnect, address 6
[ 5968.784081] usb 1-1.5: USB disconnect, address 7
[ 5968.785536] edgeport_8 ttyUSB3: Edgeport 8 port adapter converter now
disconnected from ttyUSB3
[ 5968.785599] edgeport_8 ttyUSB4: Edgeport 8 port adapter converter now
disconnected from ttyUSB4
[ 5968.785661] edgeport_8 ttyUSB5: Edgeport 8 port adapter converter now
disconnected from ttyUSB5
[ 5968.785720] edgeport_8 ttyUSB6: Edgeport 8 port adapter converter now
disconnected from ttyUSB6
[ 5968.785777] edgeport_8 ttyUSB7: Edgeport 8 port adapter converter now
disconnected from ttyUSB7
[ 5968.785836] edgeport_8 ttyUSB8: Edgeport 8 port adapter converter now
disconnected from ttyUSB8
[ 5968.785897] edgeport_8 ttyUSB9: Edgeport 8 port adapter converter now
disconnected from ttyUSB9
[ 5968.785955] edgeport_8 ttyUSB10: Edgeport 8 port adapter converter
now disconnected from ttyUSB10
[ 5968.785979] io_edgeport 1-1.5:1.0: device disconnected
[ 5968.786167] usb 1-1.6: USB disconnect, address 8
[ 5968.786393] edgeport_8 ttyUSB11: Edgeport 8 port adapter converter
now disconnected from ttyUSB11
[ 5968.786456] edgeport_8 ttyUSB12: Edgeport 8 port adapter converter
now disconnected from ttyUSB12
[ 5968.786518] edgeport_8 ttyUSB13: Edgeport 8 port adapter converter
now disconnected from ttyUSB13
[ 5968.786583] edgeport_8 ttyUSB14: Edgeport 8 port adapter converter
now disconnected from ttyUSB14
[ 5968.786645] edgeport_8 ttyUSB15: Edgeport 8 port adapter converter
now disconnected from ttyUSB15
[ 5968.786706] edgeport_8 ttyUSB16: Edgeport 8 port adapter converter
now disconnected from ttyUSB16
[ 5968.786769] edgeport_8 ttyUSB17: Edgeport 8 port adapter converter
now disconnected from ttyUSB17
[ 5968.786828] edgeport_8 ttyUSB18: Edgeport 8 port adapter converter
now disconnected from ttyUSB18
[ 5968.786851] io_edgeport 1-1.6:1.0: device disconnected
[ 5971.008033] usb 1-1: new full speed USB device using uhci_hcd and
address 9
[ 5971.173737] usb 1-1: New USB device found, idVendor=0451,
idProduct=2077
[ 5971.173744] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 5971.173749] usb 1-1: Product: General Purpose USB Hub
[ 5971.173924] usb 1-1: configuration #1 chosen from 1 choice
[ 5971.184813] hub 1-1:1.0: USB hub found
[ 5971.186194] hub 1-1:1.0: 7 ports detected
[ 5971.475153] usb 1-1.5: new full speed USB device using uhci_hcd and
address 10
[ 5971.617641] usb 1-1.5: New USB device found, idVendor=1608,
idProduct=0012
[ 5971.617648] usb 1-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=5
[ 5971.617654] usb 1-1.5: Product: Edgeport/416
[ 5971.617658] usb 1-1.5: Manufacturer: Inside Out Networks
[ 5971.617662] usb 1-1.5: SerialNumber: V24652120-0
[ 5971.617854] usb 1-1.5: configuration #1 chosen from 1 choice
[ 5971.627703] io_edgeport 1-1.5:1.0: Edgeport 8 port adapter converter
detected
[ 5971.633651] usb 1-1.5: Inside Out Networks Edgeport/416 detected
[ 5971.672684] usb 1-1.5: firmware: requesting edgeport/down.fw
[ 5971.742029] Failed to load image "edgeport/down.fw" err -2
[ 5971.742040] usb 1-1.5: firmware: requesting edgeport/boot.fw
[ 5971.808753] Failed to load image "edgeport/boot.fw" err -2
[ 5971.808915] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB3
[ 5971.808988] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB4
[ 5971.809059] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB5
[ 5971.809126] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB6
[ 5971.809193] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB7
[ 5971.809263] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB8
[ 5971.809332] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB9
[ 5971.809402] usb 1-1.5: Edgeport 8 port adapter converter now attached
to ttyUSB10
[ 5971.885615] usb 1-1.6: new full speed USB device using uhci_hcd and
address 11
[ 5972.029596] usb 1-1.6: New USB device found, idVendor=1608,
idProduct=0012
[ 5972.029603] usb 1-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=5
[ 5972.029608] usb 1-1.6: Product: Edgeport/416
[ 5972.029612] usb 1-1.6: Manufacturer: Inside Out Networks
[ 5972.029616] usb 1-1.6: SerialNumber: V24652120-1
[ 5972.029812] usb 1-1.6: configuration #1 chosen from 1 choice
[ 5972.039624] io_edgeport 1-1.6:1.0: Edgeport 8 port adapter converter
detected
[ 5972.045603] usb 1-1.6: Inside Out Networks Edgeport/416 detected
[ 5972.079534] usb 1-1.6: firmware: requesting edgeport/down.fw
[ 5972.109562] Failed to load image "edgeport/down.fw" err -2
[ 5972.109574] usb 1-1.6: firmware: requesting edgeport/boot.fw
[ 5972.147206] Failed to load image "edgeport/boot.fw" err -2
[ 5972.147396] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB11
[ 5972.147476] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB12
[ 5972.147552] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB13
[ 5972.147625] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB14
[ 5972.147698] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB15
[ 5972.147774] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB16
[ 5972.147848] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB17
[ 5972.147928] usb 1-1.6: Edgeport 8 port adapter converter now attached
to ttyUSB18
** Loaded modules:
Module Size Used by
vboxdrv 102480 0
i915 147544 2
drm 137920 3 i915
i2c_algo_bit 4860 1 i915
video 18044 1 i915
output 2604 1 video
nls_utf8 1488 1
cifs 250028 2
nls_base 6416 2 nls_utf8,cifs
nfs 221580 2
lockd 57972 1 nfs
fscache 34440 1 nfs
nfs_acl 2640 1 nfs
auth_rpcgss 31416 1 nfs
sunrpc 163772 15 nfs,lockd,nfs_acl,auth_rpcgss
ppdev 6348 0
lp 8012 0
ext2 54120 1
fuse 47752 1
loop 13324 0
psmouse 37528 0
snd_intel8x0 26584 0
snd_ac97_codec 91264 1 snd_intel8x0
ac97_bus 1456 1 snd_ac97_codec
serio_raw 4560 0
snd_pcm_oss 32232 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62420 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
pcspkr 2104 0
snd_timer 17436 1 snd_pcm
snd 49060 6
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6184 1 snd
i2c_i801 8564 0
snd_page_alloc 8180 2 snd_intel8x0,snd_pcm
rng_core 3672 0
i2c_core 20844 4 i915,drm,i2c_algo_bit,i2c_i801
shpchp 26648 0
pci_hotplug 24400 1 shpchp
evdev 8028 5
mos7720 16392 0
io_edgeport 36040 0
parport_pc 22420 1
parport 31144 3 ppdev,lp,parport_pc
pl2303 14736 0
processor 34504 0
button 5060 0
usbserial 27456 3 mos7720,io_edgeport,pl2303
intel_agp 22900 1
agpgart 30836 3 drm,intel_agp
ext3 107172 5
jbd 41036 1 ext3
mbcache 6924 2 ext2,ext3
sd_mod 28748 0
crc_t10dif 1632 1 sd_mod
usbhid 31568 0
hid 34528 1 usbhid
dm_mirror 12580 0
dm_region_hash 10668 1 dm_mirror
dm_log 8464 2 dm_mirror,dm_region_hash
dm_snapshot 21604 0
dm_mod 49992 21 dm_mirror,dm_log,dm_snapshot
ide_cd_mod 24484 0
cdrom 30316 1 ide_cd_mod
ide_gd_mod 19852 3
usb_storage 48472 0
piix 5680 2
ide_pci_generic 3632 0
ide_core 88100 4
ide_cd_mod,ide_gd_mod,piix,ide_pci_generic
ata_generic 4340 0
libata 150904 1 ata_generic
3c59x 35576 0
e100 27464 0
mii 4664 2 3c59x,e100
ehci_hcd 29680 0
uhci_hcd 19132 0
scsi_mod 131800 3 sd_mod,usb_storage,libata
usbcore 126004 9
mos7720,io_edgeport,pl2303,usbserial,usbhid,usb_storage,ehci_hcd,uhci_hcd
floppy 46220 0
thermal 12580 0
fan 4044 0
thermal_sys 13140 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G
Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable)
[size=512K]
Region 2: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable)
[size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 30000000-300fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 30100000 (32-bit, non-prefetchable)
[size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation SoundMax Intergrated Digital Audio
[8086:e002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at ffa7f800 (32-bit, non-prefetchable)
[size=512]
Region 3: Memory at ffa7f400 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
01:01.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
[Tornado] [10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for
PC Management NIC [10b7:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at cc00 [size=128]
Region 1: Memory at ff8ffc00 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
[Tornado] [10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for
PC Management NIC [10b7:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=128]
Region 1: Memory at ff8ff800 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at 30020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100
Ethernet Controller [8086:1050] (rev 01)
Subsystem: Intel Corporation Device [8086:303a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff8fe000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at c400 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100
-- System Information:
Debian Release: 5.0.3
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an
initramfs
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared
libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader
(Legacy v
ii linux-doc-2.6.30 2.6.30-6 Linux kernel specific
documentatio
-- debconf information:
linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686:
true
linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686:
true
linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686:
true
linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686:
true
linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686:
true
linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686:
false
Reply to: