Bug#502434: linux-image-2.6.26-1-686 do not boot
On Fri, Jan 2, 2009 at 6:00 PM, Moritz Muehlenhoff <jmm@inutil.org> wrote:
> On Mon, Nov 24, 2008 at 10:41:53AM -0200, David Roguin wrote:
>> I tried with the new kernel in Lenny and I've attached the output.
>> It does get further than before, but when it seems that X is going to
>> start, the screen keeps black and the keyboard leds starts turning on
>> and off all the time.
>>
>> If I boot in single-user mode It boots OK.
>
> Does it work if you avoid the proprietary kernel module from NVidia?
>
> Cheers,
> Moritz
The crash is still happening if I replace 'nvidia' in my xorg.conf for 'nv'.
I've attached the kern.log of that boot.
Thanks,
David
Jan 2 19:00:06 n180 kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Jan 2 19:00:06 n180 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jan 2 19:00:06 n180 kernel: [ 0.000000] Initializing cgroup subsys cpu
Jan 2 19:00:06 n180 kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jan 2 19:00:06 n180 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jan 2 19:00:06 n180 kernel: [ 0.000000] 126MB HIGHMEM available.
Jan 2 19:00:06 n180 kernel: [ 0.000000] 896MB LOWMEM available.
Jan 2 19:00:06 n180 kernel: [ 0.000000] found SMP MP-table at [c00f5ae0] 000f5ae0
Jan 2 19:00:06 n180 kernel: [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
Jan 2 19:00:06 n180 kernel: [ 0.000000] Zone PFN ranges:
Jan 2 19:00:06 n180 kernel: [ 0.000000] DMA 0 -> 4096
Jan 2 19:00:06 n180 kernel: [ 0.000000] Normal 4096 -> 229376
Jan 2 19:00:06 n180 kernel: [ 0.000000] HighMem 229376 -> 261856
Jan 2 19:00:06 n180 kernel: [ 0.000000] Movable zone start PFN for each node
Jan 2 19:00:06 n180 kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jan 2 19:00:06 n180 kernel: [ 0.000000] 0: 0 -> 261856
Jan 2 19:00:06 n180 kernel: [ 0.000000] On node 0 totalpages: 261856
Jan 2 19:00:06 n180 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jan 2 19:00:06 n180 kernel: [ 0.000000] DMA zone: 0 pages reserved
Jan 2 19:00:06 n180 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jan 2 19:00:06 n180 kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jan 2 19:00:06 n180 kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jan 2 19:00:06 n180 kernel: [ 0.000000] HighMem zone: 254 pages used for memmap
Jan 2 19:00:06 n180 kernel: [ 0.000000] HighMem zone: 32226 pages, LIFO batch:7
Jan 2 19:00:06 n180 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jan 2 19:00:06 n180 kernel: [ 0.000000] DMI 2.4 present.
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: RSDP 000F7570, 0024 (r2 AWARD )
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: XSDT 3FEE30C0, 0054 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: FACP 3FEEB080, 00F4 (r3 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: DSDT 3FEE3240, 7DD3 (r1 AWARD ASUSACPI 1000 MSFT 3000000)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: FACS 3FEE0000, 0040
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: HPET 3FEEB2C0, 0038 (r1 AWARD ASUSACPI 42302E31 AWRD 98)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: MCFG 3FEEB340, 003C (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: APIC 3FEEB1C0, 0090 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: SSDT 3FEEB3C0, 019E (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: SSDT 3FEEB850, 0275 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Jan 2 19:00:06 n180 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
Jan 2 19:00:06 n180 kernel: [ 0.000000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jan 2 19:00:06 n180 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
Jan 2 19:00:06 n180 kernel: [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfe800000
Jan 2 19:00:06 n180 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jan 2 19:00:06 n180 kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
Jan 2 19:00:06 n180 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jan 2 19:00:06 n180 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Jan 2 19:00:06 n180 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Jan 2 19:00:06 n180 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jan 2 19:00:06 n180 kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Jan 2 19:00:06 n180 kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
Jan 2 19:00:06 n180 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259810
Jan 2 19:00:06 n180 kernel: [ 0.000000] Kernel command line: root=/dev/hda2 ro vga=0x314
Jan 2 19:00:06 n180 kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jan 2 19:00:06 n180 kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jan 2 19:00:06 n180 kernel: [ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
Jan 2 19:00:06 n180 kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jan 2 19:00:06 n180 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jan 2 19:00:06 n180 kernel: [ 0.000000] Initializing CPU#0
Jan 2 19:00:06 n180 kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.000000] Extended CMOS year: 2000
Jan 2 19:00:06 n180 kernel: [ 0.000000] Detected 3199.740 MHz processor.
Jan 2 19:00:06 n180 kernel: [ 0.004000] Console: colour dummy device 80x25
Jan 2 19:00:06 n180 kernel: [ 0.004000] console [tty0] enabled
Jan 2 19:00:06 n180 kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.004000] Memory: 1027128k/1047424k available (1769k kernel code, 19632k reserved, 752k data, 244k init, 129920k highmem)
Jan 2 19:00:06 n180 kernel: [ 0.004000] virtual kernel memory layout:
Jan 2 19:00:06 n180 kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB)
Jan 2 19:00:06 n180 kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jan 2 19:00:06 n180 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Jan 2 19:00:06 n180 kernel: [ 0.004000] hpet clockevent registered
Jan 2 19:00:06 n180 kernel: [ 0.083982] Calibrating delay using timer specific routine.. 6407.48 BogoMIPS (lpj=12814969)
Jan 2 19:00:06 n180 kernel: [ 0.084005] Security Framework initialized
Jan 2 19:00:06 n180 kernel: [ 0.084005] SELinux: Disabled at boot.
Jan 2 19:00:06 n180 kernel: [ 0.084005] Capability LSM initialized
Jan 2 19:00:06 n180 kernel: [ 0.084005] Mount-cache hash table entries: 512
Jan 2 19:00:06 n180 kernel: [ 0.084005] Initializing cgroup subsys ns
Jan 2 19:00:06 n180 kernel: [ 0.084005] Initializing cgroup subsys cpuacct
Jan 2 19:00:06 n180 kernel: [ 0.084005] Initializing cgroup subsys devices
Jan 2 19:00:06 n180 kernel: [ 0.084005] CPU: Trace cache: 12K uops, L1 D cache: 16K
Jan 2 19:00:06 n180 kernel: [ 0.084005] CPU: L2 cache: 2048K
Jan 2 19:00:06 n180 kernel: [ 0.084005] CPU: Physical Processor ID: 0
Jan 2 19:00:06 n180 kernel: [ 0.084005] Intel machine check architecture supported.
Jan 2 19:00:06 n180 kernel: [ 0.084005] Intel machine check reporting enabled on CPU#0.
Jan 2 19:00:06 n180 kernel: [ 0.084005] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
Jan 2 19:00:06 n180 kernel: [ 0.084005] CPU0: Thermal monitoring enabled
Jan 2 19:00:06 n180 kernel: [ 0.084005] using mwait in idle threads.
Jan 2 19:00:06 n180 kernel: [ 0.084005] Checking 'hlt' instruction... OK.
Jan 2 19:00:06 n180 kernel: [ 0.100006] ACPI: Core revision 20080321
Jan 2 19:00:06 n180 kernel: [ 0.119445] ENABLING IO-APIC IRQs
Jan 2 19:00:06 n180 kernel: [ 0.119749] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 2 19:00:06 n180 kernel: [ 0.159487] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
Jan 2 19:00:06 n180 kernel: [ 0.160010] Booting processor 1/1 ip 6000
Jan 2 19:00:06 n180 kernel: [ 0.168010] Initializing CPU#1
Jan 2 19:00:06 n180 kernel: [ 0.168010] Calibrating delay using timer specific routine.. 6399.23 BogoMIPS (lpj=12798464)
Jan 2 19:00:06 n180 kernel: [ 0.168010] CPU: Trace cache: 12K uops, L1 D cache: 16K
Jan 2 19:00:06 n180 kernel: [ 0.168010] CPU: L2 cache: 2048K
Jan 2 19:00:06 n180 kernel: [ 0.168010] CPU: Physical Processor ID: 0
Jan 2 19:00:06 n180 kernel: [ 0.168010] Intel machine check architecture supported.
Jan 2 19:00:06 n180 kernel: [ 0.168010] Intel machine check reporting enabled on CPU#1.
Jan 2 19:00:06 n180 kernel: [ 0.168010] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
Jan 2 19:00:06 n180 kernel: [ 0.168010] CPU1: Thermal monitoring enabled
Jan 2 19:00:06 n180 kernel: [ 0.248015] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
Jan 2 19:00:06 n180 kernel: [ 0.248015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jan 2 19:00:06 n180 kernel: [ 0.252015] Brought up 2 CPUs
Jan 2 19:00:06 n180 kernel: [ 0.252015] Total of 2 processors activated (12806.71 BogoMIPS).
Jan 2 19:00:06 n180 kernel: [ 0.252015] CPU0 attaching sched-domain:
Jan 2 19:00:06 n180 kernel: [ 0.252015] domain 0: span 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] groups: 0 1
Jan 2 19:00:06 n180 kernel: [ 0.252015] domain 1: span 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] groups: 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] CPU1 attaching sched-domain:
Jan 2 19:00:06 n180 kernel: [ 0.252015] domain 0: span 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] groups: 1 0
Jan 2 19:00:06 n180 kernel: [ 0.252015] domain 1: span 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] groups: 0-1
Jan 2 19:00:06 n180 kernel: [ 0.252015] net_namespace: 660 bytes
Jan 2 19:00:06 n180 kernel: [ 0.252015] Booting paravirtualized kernel on bare hardware
Jan 2 19:00:06 n180 kernel: [ 0.252015] NET: Registered protocol family 16
Jan 2 19:00:06 n180 kernel: [ 0.252015] ACPI: bus type pci registered
Jan 2 19:00:06 n180 kernel: [ 0.252015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jan 2 19:00:06 n180 kernel: [ 0.252015] PCI: MCFG area at e0000000 reserved in E820
Jan 2 19:00:06 n180 kernel: [ 0.252015] PCI: Using MMCONFIG for extended config space
Jan 2 19:00:06 n180 kernel: [ 0.252015] PCI: Using configuration type 1 for base access
Jan 2 19:00:06 n180 kernel: [ 0.252015] Setting up standard PCI resources
Jan 2 19:00:06 n180 kernel: [ 0.256016] ACPI: EC: Look up EC in DSDT
Jan 2 19:00:06 n180 kernel: [ 0.272005] ACPI: Interpreter enabled
Jan 2 19:00:06 n180 kernel: [ 0.272016] ACPI: (supports S0 S1 S3 S4 S5)
Jan 2 19:00:06 n180 kernel: [ 0.272017] ACPI: Using IOAPIC for interrupt routing
Jan 2 19:00:06 n180 kernel: [ 0.288018] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 2 19:00:06 n180 kernel: [ 0.288018] PCI: Transparent bridge - 0000:00:13.1
Jan 2 19:00:06 n180 kernel: [ 0.288018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 2 19:00:06 n180 kernel: [ 0.288018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
Jan 2 19:00:06 n180 kernel: [ 0.288018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Jan 2 19:00:06 n180 kernel: [ 0.288018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
Jan 2 19:00:06 n180 kernel: [ 0.378714] ACPI: PCI Root Bridge [PCI1] (0000:80)
Jan 2 19:00:06 n180 kernel: [ 0.378714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
Jan 2 19:00:06 n180 kernel: [ 0.378714] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Jan 2 19:00:06 n180 kernel: [ 0.378714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
Jan 2 19:00:06 n180 kernel: [ 0.378984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
Jan 2 19:00:06 n180 kernel: [ 0.379243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
Jan 2 19:00:06 n180 kernel: [ 0.379493] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
Jan 2 19:00:06 n180 kernel: [ 0.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 2 19:00:06 n180 kernel: [ 0.381541] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 2 19:00:06 n180 kernel: [ 0.381784] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
Jan 2 19:00:06 n180 kernel: [ 0.383471] Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 2 19:00:06 n180 kernel: [ 0.384176] pnp: PnP ACPI init
Jan 2 19:00:06 n180 kernel: [ 0.384190] ACPI: bus type pnp registered
Jan 2 19:00:06 n180 kernel: [ 0.392308] pnp: PnP ACPI: found 17 devices
Jan 2 19:00:06 n180 kernel: [ 0.392308] ACPI: ACPI bus type pnp unregistered
Jan 2 19:00:06 n180 kernel: [ 0.392308] PnPBIOS: Disabled by ACPI PNP
Jan 2 19:00:06 n180 kernel: [ 0.392308] PCI: Using ACPI for IRQ routing
Jan 2 19:00:06 n180 kernel: [ 0.398270] hpet0: at MMIO 0xfe800000, IRQs 2, 8, 0
Jan 2 19:00:06 n180 kernel: [ 0.398283] hpet0: 3 32-bit timers, 14318180 Hz
Jan 2 19:00:06 n180 kernel: [ 0.400515] ACPI: RTC can wake from S4
Jan 2 19:00:06 n180 kernel: [ 0.407454] system 00:01: ioport range 0x400-0x47f has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407463] system 00:01: ioport range 0x500-0x50f has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407480] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407488] system 00:02: ioport range 0x290-0x29f has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407495] system 00:02: ioport range 0x800-0x805 has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407503] system 00:02: ioport range 0x880-0x88f has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407531] system 00:0d: iomem range 0x10000000-0x10000fff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407543] system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407555] system 00:10: iomem range 0xd3000-0xd3fff has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407561] system 00:10: iomem range 0xf0000-0xf7fff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407568] system 00:10: iomem range 0xf8000-0xfbfff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407575] system 00:10: iomem range 0xfc000-0xfffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407583] system 00:10: iomem range 0xfe800000-0xfe8000ff has been reserved
Jan 2 19:00:06 n180 kernel: [ 0.407590] system 00:10: iomem range 0x3fee0000-0x3fefffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407598] system 00:10: iomem range 0xffff0000-0xffffffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407606] system 00:10: iomem range 0x0-0x9ffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407613] system 00:10: iomem range 0x100000-0x3fedffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407621] system 00:10: iomem range 0xfec00000-0xfec00fff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407630] system 00:10: iomem range 0xfee00000-0xfee00fff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.407638] system 00:10: iomem range 0xfff80000-0xfffeffff could not be reserved
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Bridge: 0000:00:01.0
Jan 2 19:00:06 n180 kernel: [ 0.439435] IO window: disabled.
Jan 2 19:00:06 n180 kernel: [ 0.439435] MEM window: disabled.
Jan 2 19:00:06 n180 kernel: [ 0.439435] PREFETCH window: disabled.
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Bridge: 0000:00:02.0
Jan 2 19:00:06 n180 kernel: [ 0.439435] IO window: disabled.
Jan 2 19:00:06 n180 kernel: [ 0.439435] MEM window: 0xdc000000-0xdeffffff
Jan 2 19:00:06 n180 kernel: [ 0.439435] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Bridge: 0000:00:03.0
Jan 2 19:00:06 n180 kernel: [ 0.439435] IO window: b000-cfff
Jan 2 19:00:06 n180 kernel: [ 0.439435] MEM window: 0xdfe00000-0xdfefffff
Jan 2 19:00:06 n180 kernel: [ 0.439435] PREFETCH window: disabled.
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Bridge: 0000:00:13.1
Jan 2 19:00:06 n180 kernel: [ 0.439435] IO window: a000-afff
Jan 2 19:00:06 n180 kernel: [ 0.439435] MEM window: 0xdfd00000-0xdfdfffff
Jan 2 19:00:06 n180 kernel: [ 0.439435] PREFETCH window: 0x0000000040000000-0x00000000400fffff
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 2 19:00:06 n180 kernel: [ 0.439435] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 2 19:00:06 n180 kernel: [ 0.439435] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jan 2 19:00:06 n180 kernel: [ 0.439435] PCI: Setting latency timer of device 0000:00:13.1 to 64
Jan 2 19:00:06 n180 kernel: [ 0.439435] NET: Registered protocol family 2
Jan 2 19:00:06 n180 kernel: [ 0.452349] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.452682] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.455435] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jan 2 19:00:06 n180 kernel: [ 0.455725] TCP: Hash tables configured (established 131072 bind 65536)
Jan 2 19:00:06 n180 kernel: [ 0.455731] TCP reno registered
Jan 2 19:00:06 n180 kernel: [ 0.462576] NET: Registered protocol family 1
Jan 2 19:00:06 n180 kernel: [ 0.462716] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Jan 2 19:00:06 n180 kernel: [ 0.514449] Switched to high resolution mode on CPU 0
Jan 2 19:00:06 n180 kernel: [ 0.729611] it is
Jan 2 19:00:06 n180 kernel: [ 1.033550] Freeing initrd memory: 7217k freed
Jan 2 19:00:06 n180 kernel: [ 1.033653] audit: initializing netlink socket (disabled)
Jan 2 19:00:06 n180 kernel: [ 1.033653] type=2000 audit(1230922786.020:1): initialized
Jan 2 19:00:06 n180 kernel: [ 1.035974] highmem bounce pool size: 64 pages
Jan 2 19:00:06 n180 kernel: [ 1.035974] Total HugeTLB memory allocated, 0
Jan 2 19:00:06 n180 kernel: [ 1.035974] VFS: Disk quotas dquot_6.5.1
Jan 2 19:00:06 n180 kernel: [ 1.035974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 2 19:00:06 n180 kernel: [ 1.035974] msgmni has been set to 1766
Jan 2 19:00:06 n180 kernel: [ 1.035974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan 2 19:00:06 n180 kernel: [ 1.035974] io scheduler noop registered
Jan 2 19:00:06 n180 kernel: [ 1.035974] io scheduler anticipatory registered
Jan 2 19:00:06 n180 kernel: [ 1.035974] io scheduler deadline registered
Jan 2 19:00:06 n180 kernel: [ 1.035974] io scheduler cfq registered (default)
Jan 2 19:00:06 n180 kernel: [ 1.035974] PCI: VIA PCI bridge detected.Disabling DAC.
Jan 2 19:00:06 n180 kernel: [ 1.035974] pci 0000:02:00.0: Boot video device
Jan 2 19:00:06 n180 kernel: [ 1.035974] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 2 19:00:06 n180 kernel: [ 1.035974] assign_interrupt_mode Found MSI capability
Jan 2 19:00:06 n180 kernel: [ 1.035974] Allocate Port Service[0000:00:02.0:pcie00]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:02.0:pcie01]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:02.0:pcie02]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:02.0:pcie03]
Jan 2 19:00:06 n180 kernel: [ 1.039975] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jan 2 19:00:06 n180 kernel: [ 1.039975] assign_interrupt_mode Found MSI capability
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:03.0:pcie00]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:03.0:pcie01]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:03.0:pcie02]
Jan 2 19:00:06 n180 kernel: [ 1.039975] Allocate Port Service[0000:00:03.0:pcie03]
Jan 2 19:00:06 n180 kernel: [ 1.043975] Load service driver aer on pcie device 0000:00:02.0:pcie01
Jan 2 19:00:06 n180 kernel: [ 1.047974] Load service driver aer on pcie device 0000:00:03.0:pcie01
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1875k, total 131072k
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: mode is 800x600x16, linelength=1600, pages=2
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: protected mode interface info at c000:d1f0
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: pmi: set display start = c00cd226, set palette = c00cd290
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: scrolling: redraw
Jan 2 19:00:06 n180 kernel: [ 1.047974] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jan 2 19:00:06 n180 kernel: [ 1.059619] Console: switching to colour frame buffer device 100x37
Jan 2 19:00:06 n180 kernel: [ 1.071289] fb0: VESA VGA frame buffer device
Jan 2 19:00:06 n180 kernel: [ 1.071974] isapnp: Scanning for PnP cards...
Jan 2 19:00:06 n180 kernel: [ 1.379973] isapnp: No Plug & Play device found
Jan 2 19:00:06 n180 kernel: [ 1.385468] hpet_resources: 0xfe800000 is busy
Jan 2 19:00:06 n180 kernel: [ 1.385468] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan 2 19:00:06 n180 kernel: [ 1.385468] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 2 19:00:06 n180 kernel: [ 1.385492] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 2 19:00:06 n180 kernel: [ 1.389661] brd: module loaded
Jan 2 19:00:06 n180 kernel: [ 1.389661] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 2 19:00:06 n180 kernel: [ 1.393660] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 2 19:00:06 n180 kernel: [ 1.393660] serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 2 19:00:06 n180 kernel: [ 1.393660] mice: PS/2 mouse device common for all mice
Jan 2 19:00:06 n180 kernel: [ 1.393660] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Jan 2 19:00:06 n180 kernel: [ 1.399249] rtc0: alarms up to one year, y3k
Jan 2 19:00:06 n180 kernel: [ 1.407964] cpuidle: using governor ladder
Jan 2 19:00:06 n180 kernel: [ 1.411975] cpuidle: using governor menu
Jan 2 19:00:06 n180 kernel: [ 1.417527] No iBFT detected.
Jan 2 19:00:06 n180 kernel: [ 1.423333] TCP cubic registered
Jan 2 19:00:06 n180 kernel: [ 1.428259] NET: Registered protocol family 17
Jan 2 19:00:06 n180 kernel: [ 1.433997] Using IPI No-Shortcut mode
Jan 2 19:00:06 n180 kernel: [ 1.440080] input: AT Translated Set 2 keyboard as /class/input/input0
Jan 2 19:00:06 n180 kernel: [ 1.449661] registered taskstats version 1
Jan 2 19:00:06 n180 kernel: [ 1.452079] rtc_cmos 00:05: setting system clock to 2009-01-02 18:59:47 UTC (1230922787)
Jan 2 19:00:06 n180 kernel: [ 1.456926] Freeing unused kernel memory: 244k freed
Jan 2 19:00:06 n180 kernel: [ 1.607183] ACPI: PNP0C0B:00 is registered as cooling_device0
Jan 2 19:00:06 n180 kernel: [ 1.618865] ACPI: Fan [FAN] (on)
Jan 2 19:00:06 n180 kernel: [ 1.631834] ACPI: ACPI0007:00 is registered as cooling_device1
Jan 2 19:00:06 n180 kernel: [ 1.637887] ACPI: SSDT 3FEEB7C0, 0087 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Jan 2 19:00:06 n180 kernel: [ 1.646848] ACPI: ACPI0007:01 is registered as cooling_device2
Jan 2 19:00:06 n180 kernel: [ 1.655137] ACPI: LNXTHERM:01 is registered as thermal_zone0
Jan 2 19:00:06 n180 kernel: [ 1.661157] ACPI: Thermal Zone [THRM] (40 C)
Jan 2 19:00:06 n180 kernel: [ 2.230372] Uniform Multi-Platform E-IDE driver
Jan 2 19:00:06 n180 kernel: [ 2.236104] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 2 19:00:06 n180 kernel: [ 2.258374] usbcore: registered new interface driver usbfs
Jan 2 19:00:06 n180 kernel: [ 2.264436] usbcore: registered new interface driver hub
Jan 2 19:00:06 n180 kernel: [ 2.273102] usbcore: registered new device driver usb
Jan 2 19:00:06 n180 kernel: [ 2.279074] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1
Jan 2 19:00:06 n180 kernel: [ 2.285498] VP_IDE: not 100% native mode: will probe irqs later
Jan 2 19:00:06 n180 kernel: [ 2.292460] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Jan 2 19:00:06 n180 kernel: [ 2.300409] ide0: BM-DMA at 0xe400-0xe407
Jan 2 19:00:06 n180 kernel: [ 2.306347] ide1: BM-DMA at 0xe408-0xe40f
Jan 2 19:00:06 n180 kernel: [ 2.312446] Probing IDE interface ide0...
Jan 2 19:00:06 n180 kernel: [ 2.320417] No dock devices found.
Jan 2 19:00:06 n180 kernel: [ 2.336417] SCSI subsystem initialized
Jan 2 19:00:06 n180 kernel: [ 2.425226] libata version 3.00 loaded.
Jan 2 19:00:06 n180 kernel: [ 2.425226] USB Universal Host Controller Interface driver v3.0
Jan 2 19:00:06 n180 kernel: [ 2.556295] Floppy drive(s): fd0 is 1.44M
Jan 2 19:00:06 n180 kernel: [ 2.584295] FDC 0 is a post-1991 82077
Jan 2 19:00:06 n180 kernel: [ 2.728417] hda: WDC WD800BB-22JHC0, ATA DISK drive
Jan 2 19:00:06 n180 kernel: [ 3.617122] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jan 2 19:00:06 n180 kernel: [ 3.617201] hda: UDMA/100 mode selected
Jan 2 19:00:06 n180 kernel: [ 3.626808] Probing IDE interface ide1...
Jan 2 19:00:06 n180 kernel: [ 4.759569] hdc: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
Jan 2 19:00:06 n180 kernel: [ 5.098853] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jan 2 19:00:06 n180 kernel: [ 5.103301] hdc: UDMA/66 mode selected
Jan 2 19:00:06 n180 kernel: [ 5.206166] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 2 19:00:06 n180 kernel: [ 5.505410] ide1 at 0x170-0x177,0x376 on irq 15
Jan 2 19:00:06 n180 kernel: [ 5.508704] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
Jan 2 19:00:06 n180 kernel: [ 5.517411] uhci_hcd 0000:00:10.0: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 5.525569] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Jan 2 19:00:06 n180 kernel: [ 5.531566] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
Jan 2 19:00:06 n180 kernel: [ 5.539637] usb usb1: configuration #1 chosen from 1 choice
Jan 2 19:00:06 n180 kernel: [ 5.543306] hub 1-0:1.0: USB hub found
Jan 2 19:00:06 n180 kernel: [ 5.548970] hub 1-0:1.0: 2 ports detected
Jan 2 19:00:06 n180 kernel: [ 5.661389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jan 2 19:00:06 n180 kernel: [ 5.665395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 2 19:00:06 n180 kernel: [ 5.717373] usb usb1: Product: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 5.725370] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Jan 2 19:00:06 n180 kernel: [ 5.733373] usb usb1: SerialNumber: 0000:00:10.0
Jan 2 19:00:06 n180 kernel: [ 5.740733] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
Jan 2 19:00:06 n180 kernel: [ 5.745379] uhci_hcd 0000:00:10.1: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 5.750823] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Jan 2 19:00:06 n180 kernel: [ 5.756933] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
Jan 2 19:00:06 n180 kernel: [ 5.762252] usb usb2: configuration #1 chosen from 1 choice
Jan 2 19:00:06 n180 kernel: [ 5.768874] hub 2-0:1.0: USB hub found
Jan 2 19:00:06 n180 kernel: [ 5.773525] hub 2-0:1.0: 2 ports detected
Jan 2 19:00:06 n180 kernel: [ 5.881448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan 2 19:00:06 n180 kernel: [ 5.887429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 2 19:00:06 n180 kernel: [ 5.891433] usb usb2: Product: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 5.897619] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Jan 2 19:00:06 n180 kernel: [ 5.905619] usb usb2: SerialNumber: 0000:00:10.1
Jan 2 19:00:06 n180 kernel: [ 5.912492] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
Jan 2 19:00:06 n180 kernel: [ 5.918139] uhci_hcd 0000:00:10.2: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 5.922237] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Jan 2 19:00:06 n180 kernel: [ 5.928871] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
Jan 2 19:00:06 n180 kernel: [ 5.933755] usb usb3: configuration #1 chosen from 1 choice
Jan 2 19:00:06 n180 kernel: [ 5.940840] hub 3-0:1.0: USB hub found
Jan 2 19:00:06 n180 kernel: [ 5.945627] hub 3-0:1.0: 2 ports detected
Jan 2 19:00:06 n180 kernel: [ 6.052819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jan 2 19:00:06 n180 kernel: [ 6.059293] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 2 19:00:06 n180 kernel: [ 6.063296] usb usb3: Product: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 6.069403] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Jan 2 19:00:06 n180 kernel: [ 6.077367] usb usb3: SerialNumber: 0000:00:10.2
Jan 2 19:00:06 n180 kernel: [ 6.084977] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
Jan 2 19:00:06 n180 kernel: [ 6.089372] uhci_hcd 0000:00:10.3: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 6.095400] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Jan 2 19:00:06 n180 kernel: [ 6.101397] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
Jan 2 19:00:06 n180 kernel: [ 6.108568] usb usb4: configuration #1 chosen from 1 choice
Jan 2 19:00:06 n180 kernel: [ 6.113399] hub 4-0:1.0: USB hub found
Jan 2 19:00:06 n180 kernel: [ 6.120607] hub 4-0:1.0: 2 ports detected
Jan 2 19:00:06 n180 kernel: [ 6.225043] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jan 2 19:00:06 n180 kernel: [ 6.234930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 2 19:00:06 n180 kernel: [ 6.238934] usb usb4: Product: UHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 6.290932] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Jan 2 19:00:06 n180 kernel: [ 6.298935] usb usb4: SerialNumber: 0000:00:10.3
Jan 2 19:00:06 n180 kernel: [ 6.310929] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
Jan 2 19:00:06 n180 kernel: [ 6.310946] ehci_hcd 0000:00:10.4: EHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 6.318398] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Jan 2 19:00:06 n180 kernel: [ 6.324242] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
Jan 2 19:00:06 n180 kernel: [ 6.342343] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 2 19:00:06 n180 kernel: [ 6.347005] usb usb5: configuration #1 chosen from 1 choice
Jan 2 19:00:06 n180 kernel: [ 6.352881] hub 5-0:1.0: USB hub found
Jan 2 19:00:06 n180 kernel: [ 6.359486] hub 5-0:1.0: 8 ports detected
Jan 2 19:00:06 n180 kernel: [ 6.463136] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Jan 2 19:00:06 n180 kernel: [ 6.473057] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 2 19:00:06 n180 kernel: [ 6.477062] usb usb5: Product: EHCI Host Controller
Jan 2 19:00:06 n180 kernel: [ 6.493058] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Jan 2 19:00:06 n180 kernel: [ 6.501059] usb usb5: SerialNumber: 0000:00:10.4
Jan 2 19:00:06 n180 kernel: [ 6.508755] JMB: IDE controller (0x197b:0x2363 rev 0x02) at PCI slot 0000:03:00.1
Jan 2 19:00:06 n180 kernel: [ 6.513056] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
Jan 2 19:00:06 n180 kernel: [ 6.525044] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) -> IRQ 29
Jan 2 19:00:06 n180 kernel: [ 6.530984] JMB: 100% native mode on irq 29
Jan 2 19:00:06 n180 kernel: [ 6.537036] PCI: Setting latency timer of device 0000:03:00.1 to 64
Jan 2 19:00:06 n180 kernel: [ 6.537044] ide2: BM-DMA at 0xbc00-0xbc07
Jan 2 19:00:06 n180 kernel: [ 6.542966] ide3: BM-DMA at 0xbc08-0xbc0f
Jan 2 19:00:06 n180 kernel: [ 6.548920] Probing IDE interface ide2...
Jan 2 19:00:06 n180 kernel: [ 7.113485] Probing IDE interface ide3...
Jan 2 19:00:06 n180 kernel: [ 7.985764] ide2 at 0xcc00-0xcc07,0xc802 on irq 29
Jan 2 19:00:06 n180 kernel: [ 7.995616] ide3 at 0xc400-0xc407,0xc002 on irq 29
Jan 2 19:00:06 n180 kernel: [ 8.071613] ahci 0000:03:00.0: version 3.0
Jan 2 19:00:06 n180 kernel: [ 8.071613] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 28
Jan 2 19:00:06 n180 kernel: [ 8.076938] PCI: Disallowing DAC for device 0000:03:00.0
Jan 2 19:00:06 n180 kernel: [ 9.669591] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Jan 2 19:00:06 n180 kernel: [ 9.679644] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Jan 2 19:00:06 n180 kernel: [ 9.687539] PCI: Setting latency timer of device 0000:03:00.0 to 64
Jan 2 19:00:06 n180 kernel: [ 9.687539] scsi0 : ahci
Jan 2 19:00:06 n180 kernel: [ 9.695560] scsi1 : ahci
Jan 2 19:00:06 n180 kernel: [ 9.699560] ata1: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 28
Jan 2 19:00:06 n180 kernel: [ 9.705514] ata2: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 28
Jan 2 19:00:06 n180 kernel: [ 10.025978] ata1: SATA link down (SStatus 0 SControl 300)
Jan 2 19:00:06 n180 kernel: [ 10.727817] ata2: SATA link down (SStatus 0 SControl 300)
Jan 2 19:00:06 n180 kernel: [ 10.752134] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Jan 2 19:00:06 n180 kernel: [ 10.756329] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 20 (level, low) -> IRQ 20
Jan 2 19:00:06 n180 kernel: [ 10.764594] eth0: RTL8169sc/8110sc at 0xf8840000, 00:1a:92:31:86:f1, XID 18000000 IRQ 20
Jan 2 19:00:06 n180 kernel: [ 10.780145] sata_via 0000:00:0f.0: version 2.3
Jan 2 19:00:06 n180 kernel: [ 10.780145] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
Jan 2 19:00:06 n180 kernel: [ 10.783078] sata_via 0000:00:0f.0: routed to hard irq line 11
Jan 2 19:00:06 n180 kernel: [ 10.793498] scsi2 : sata_via
Jan 2 19:00:06 n180 kernel: [ 10.836224] scsi3 : sata_via
Jan 2 19:00:06 n180 kernel: [ 10.844224] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
Jan 2 19:00:06 n180 kernel: [ 10.848542] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
Jan 2 19:00:06 n180 kernel: [ 10.881880] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Jan 2 19:00:06 n180 kernel: [ 10.889936] Uniform CD-ROM driver Revision: 3.20
Jan 2 19:00:06 n180 kernel: [ 10.908950] hda: max request size: 128KiB
Jan 2 19:00:06 n180 kernel: [ 10.919942] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 2 19:00:06 n180 kernel: [ 10.934068] hda: cache flushes supported
Jan 2 19:00:06 n180 kernel: [ 10.942910] hda: hda1 hda2 hda3 < hda5 >
Jan 2 19:00:06 n180 kernel: [ 11.068537] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jan 2 19:00:06 n180 kernel: [ 11.301722] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jan 2 19:00:06 n180 kernel: [ 11.418897] kjournald starting. Commit interval 5 seconds
Jan 2 19:00:06 n180 kernel: [ 11.418897] EXT3-fs: mounted filesystem with ordered data mode.
Jan 2 19:00:06 n180 kernel: [ 13.700647] udevd version 125 started
Jan 2 19:00:06 n180 kernel: [ 14.627582] Linux agpgart interface v0.103
Jan 2 19:00:06 n180 kernel: [ 14.724756] agpgart: Detected VIA P4M890 chipset
Jan 2 19:00:06 n180 kernel: [ 14.736757] agpgart: AGP aperture is 128M @ 0xd0000000
Jan 2 19:00:06 n180 kernel: [ 15.231365] input: Power Button (FF) as /class/input/input1
Jan 2 19:00:06 n180 kernel: [ 15.297465] ACPI: Power Button (FF) [PWRF]
Jan 2 19:00:06 n180 kernel: [ 15.303611] input: Power Button (CM) as /class/input/input2
Jan 2 19:00:06 n180 kernel: [ 15.380477] ACPI: Power Button (CM) [PWRB]
Jan 2 19:00:06 n180 kernel: [ 15.386950] input: Sleep Button (CM) as /class/input/input3
Jan 2 19:00:06 n180 kernel: [ 15.439541] ACPI: Sleep Button (CM) [SLPB]
Jan 2 19:00:06 n180 kernel: [ 15.727975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 2 19:00:06 n180 kernel: [ 15.742527] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 2 19:00:06 n180 kernel: [ 16.110962] input: PC Speaker as /class/input/input4
Jan 2 19:00:06 n180 kernel: [ 16.717939] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
Jan 2 19:00:06 n180 kernel: [ 16.752678] parport_pc 00:0a: reported by Plug and Play ACPI
Jan 2 19:00:06 n180 kernel: [ 16.759591] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Jan 2 19:00:06 n180 kernel: [ 17.001730] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 17
Jan 2 19:00:06 n180 kernel: [ 17.009781] PCI: Setting latency timer of device 0000:80:01.0 to 64
Jan 2 19:00:06 n180 kernel: [ 17.009787] PCI: Disallowing DAC for device 0000:80:01.0
Jan 2 19:00:06 n180 kernel: [ 18.286373] Adding 1253028k swap on /dev/hda5. Priority:-1 extents:1 across:1253028k
Jan 2 19:00:06 n180 kernel: [ 18.755979] EXT3 FS on hda2, internal journal
Jan 2 19:00:06 n180 kernel: [ 19.033205] loop: module loaded
Jan 2 19:00:06 n180 kernel: [ 19.453907] fuse init (API version 7.9)
Jan 2 19:00:06 n180 kernel: [ 22.395843] r8169: eth0: link up
Jan 2 19:00:16 n180 kernel: [ 34.047963] NET: Registered protocol family 10
Jan 2 19:00:16 n180 kernel: [ 34.061251] lo: Disabled Privacy Extensions
Jan 2 19:00:18 n180 kernel: [ 36.769163] lp0: using parport0 (interrupt-driven).
Jan 2 19:00:18 n180 kernel: [ 36.795213] ppdev: user-space parallel port driver
Jan 2 19:00:22 n180 kernel: [ 41.036978] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
Reply to: