Your message dated Mon, 10 Jul 2006 23:56:01 -0700 with message-id <20060711065601.GA2643@localhost.localdomain> and subject line Fixed in 2.6.17-2 (if not earlier) has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.16-1-powerpc: oops loading snd-powermac, no soundcard
- From: Paul Brossier <piem@debian.org>
- Date: Sat, 08 Apr 2006 10:56:34 +0100
- Message-id: <20060408095634.3445.90879.reportbug@pomme.anchorland.local>
Package: linux-image-2.6.16-1-powerpc Version: 2.6.16-5 Severity: important hi, when booting 2.6.16-5 on this ibook g4, i got the attached messages. the module is loaded but no soundcard was found. cheers, piem $ lsmod | grep ^snd snd_pcm_oss 63840 0 snd_mixer_oss 21568 1 snd_pcm_oss snd_seq 61896 0 snd_seq_device 10188 1 snd_seq snd_powermac 67720 1 snd_pcm 102756 2 snd_pcm_oss,snd_powermac snd_timer 27460 2 snd_seq,snd_pcm snd 66740 7 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_powermac,snd_pcm,snd_timer snd_page_alloc 11656 1 snd_pcm $ cat /proc/asound/cards --- no soundcards --- $ dmesg | tail -n 75 sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:b2:a5:ec eth0: Found BCM5221 PHY ts: Compaq touchscreen protocol output eth0: Link is up at 100 Mbps, full-duplex. eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 747060k swap on /dev/hda4. Priority:-1 extents:1 across:747060k apm_emu: APM Emulation 0.5 initialized. SCSI subsystem initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Unable to handle kernel paging request for data at address 0x00000002 Faulting instruction address: 0xc01a2da0 Oops: Kernel access of bad area, sig: 11 [#1] Modules linked in: snd_powermac snd_pcm snd_timer snd soundcore snd_page_alloc sbp2 scsi_mod apm_emu eth1394 tsdev sungem sungem_phy uninorth_agp agpgart ide_cd ehci_hcd cdrom ohci_hcd ohci1394 ieee1394 usbcore xfs exportfs ide_disk evdev NIP: C01A2DA0 LR: D23753F4 CTR: C01A2D74 REGS: cf3e1cc0 TRAP: 0300 Not tainted (2.6.16-1-powerpc) MSR: 00009032 <EE,ME,IR,DR> CR: 22008444 XER: 20000000 DAR: 00000002, DSISR: 40000000 TASK = cfebe650[1156] 'modprobe' THREAD: cf3e0000 GPR00: D23753F4 CF3E1D70 CFEBE650 00000000 00000001 00000060 00000000 00000001 GPR08: 00000002 00000000 C0018BCC C01A2D74 00000000 1001E638 00000000 00000000 GPR16: 00000000 00000000 100013D0 00000000 3002A000 00000003 00000000 00000000 GPR24: 1001C680 00000000 10018CD4 CFAD9C00 CF9500E0 0000000A D237E504 D2378580 NIP [C01A2DA0] i2c_smbus_write_byte_data+0x2c/0x50 LR [D23753F4] send_init_client+0x30/0x90 [snd_powermac] Call Trace: [CF3E1D70] [C0053AA0] setup_irq+0x12c/0x148 (unreliable) [CF3E1DB0] [D23753F4] send_init_client+0x30/0x90 [snd_powermac] [CF3E1DD0] [D21F7F00] snd_pmac_tumbler_post_init+0x30/0x68 [snd_powermac] [CF3E1DE0] [D21F6228] snd_pmac_probe+0x1a8/0x324 [snd_powermac] [CF3E1E10] [C017D49C] platform_drv_probe+0x20/0x30 [CF3E1E20] [C017B490] driver_probe_device+0x98/0x100 [CF3E1E40] [C017A92C] bus_for_each_drv+0x50/0x98 [CF3E1E70] [C017B568] device_attach+0x6c/0xa8 [CF3E1E90] [C017A9AC] bus_add_device+0x38/0xf4 [CF3E1EB0] [C01796C0] device_add+0xe0/0x174 [CF3E1ED0] [C017D2E8] platform_device_add+0x118/0x160 [CF3E1EF0] [C017D874] platform_device_register_simple+0x4c/0x78 [CF3E1F10] [D21F6044] alsa_card_pmac_init+0x44/0x80 [snd_powermac] [CF3E1F20] [C004B910] sys_init_module+0x15c/0x2c0 [CF3E1F40] [C000FF44] ret_from_syscall+0x0/0x40 --- Exception: c01 at 0xff6e758 LR = 0x10003e30 Instruction dump: 4e800020 7c0802a6 9421ffc0 7c691b78 7c872378 38c00000 39000002 98a10008 90010044 60000000 60000000 60000000 <a0a30002> a0890004 39210008 80630008 <6>adt746x: version 1 (supported) adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 sensor 0: PWR/MEMORY BOTTOMSIDE sensor 1: CPU BOTTOMSIDE sensor 2: GPU ON DIE device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com XFS mounting filesystem hda5 Ending clean XFS mount for filesystem: hda5 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (2048 buckets, 16384 max) - 232 bytes per conntrack eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled input: Mouseemu virtual keyboard as /class/input/input4 input: Mouseemu virtual mouse as /class/input/input5 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.22.0 20051229 on minor 0 agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R200 Microcode eth0: no IPv6 routers present -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-powerpc Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages linux-image-2.6.16-1-powerpc depends on: ii mkvmlinuz 18 create a kernel to boot a PowerPC ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-9 Yet Another mkInitRD linux-image-2.6.16-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.16-1-powerpc/postinst/bootloader-error-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/preinst/already-running-this-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/preinst/initrd-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/preinst/overwriting-modules-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/old-system-map-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/depmod-error-2.6.16-1-powerpc: false linux-image-2.6.16-1-powerpc/prerm/would-invalidate-boot-loader-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/elilo-initrd-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/bootloader-test-error-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/old-dir-initrd-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/abort-overwrite-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.16-1-powerpc/postinst/depmod-error-initrd-2.6.16-1-powerpc: false linux-image-2.6.16-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.16-1-powerpc/preinst/lilo-initrd-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/failed-to-move-modules-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/prerm/removing-running-kernel-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/bootloader-initrd-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/create-kimage-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/abort-install-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/old-initrd-link-2.6.16-1-powerpc: true
--- End Message ---
--- Begin Message ---
- To: 358816-done@bugs.debian.org
- Subject: Fixed in 2.6.17-2 (if not earlier)
- From: Matt Kraai <kraai@ftbfs.org>
- Date: Mon, 10 Jul 2006 23:56:01 -0700
- Message-id: <20060711065601.GA2643@localhost.localdomain>
Version: 2.6.17-2 This problem is fixed in 2.6.17-2. I am able to load snd-powermac and a grep through the kernel source reveals no module requests for i2c-keywest. It may have been fixed in an earlier version, if anyone cares to check. -- MattAttachment: signature.asc
Description: Digital signature
--- End Message ---