Bug#377677: No sound from Creative Sound Blaster 16 PCI with 2.6 kernel
Package: kernel
Version: 2.6.8-2-686
Severity: important
I have installed Debian 3.1 r2. I initially installed the 2.4 kernel and I
got sound from my soundcard. I then added the 2.6 kernel and configured LILO
so I can boot either the 2.4 or 2.6 kernel. I still get sound when I boot
the 2.4 kernel but don't get any sound when I boot the 2.6 kernel.
My system has a QDI Advance 9 motherboard with a Pentium III processor. The
soundcard is a Creative Sound Blaster 16 PCI.
The output from lspci is
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev 44)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South]
(rev 23)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 11)
0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
(rev 30)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 74)
0000:00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev b2)
The output from lspci -vsb is
0000:00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 5
I/O ports at ec00 [size=64]
Capabilities: <available only to root>
The output from uname -a for 2.4 and 2.6 are
Linux advance9 2.4.27-2-686 #1 Wed Aug 17 10:34:09 UTC 2005 i686 GNU/Linux
Linux advance9 2.6.8-2-686 #1 Tue Aug 16 13:22:48 UTC 2005 i686 GNU/Linux
I have attached the output from lsmod under both 2.4 and 2.6 kernels. They
are quite different but in both cases the module es1371 (which I think is
the soundcard driver) is loaded.
I created a shell script p to to play a short .wav file. This contains
cat /proc/interrupts
/usr/bin/time -p bplay ~bruce/ringin.wav
cat /proc/interrupts
Under 2.4 it takes real 0.90, user 0.00, sys 0.01 to play the .wav file.
Interrupt 5 (which belongs to es1371) increased by 155.
Under 2.6 it takes real 1.49, user 0.00, sys 0.00 to play the .wav file.
Interrupt 5 (which belongs to Ensoniq AudioPCI) increased by 2.
I have attached the output from dmesg under both 2.4 and 2.6 kernels. The
dmesg for 2.4 contains
es1371: version v0.32 time 10:50:24 Aug 17 2005
PCI: Found IRQ 5 for device 00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xec00 irq 5
es1371: features: joystick 0x0
The dmesg for 2.6 only contains an equivelant of the first line. It does
does not contain equivelants of the remaining lines.
es1371: version v0.32 time 13:45:31 Aug 16 2005
Module Size Used by
nls_iso8859_1 4032 1
nls_cp437 5696 1
vfat 14656 1
fat 46784 1 vfat
apm 21100 0
ipv6 264772 8
ide_floppy 19360 0
parport_pc 36900 0
parport 41800 1 parport_pc
floppy 61200 0
pcspkr 3592 0
es1371 37440 0
ac97_codec 18956 1 es1371
pci_hotplug 34640 0
via_agp 9056 1
uhci_hcd 33136 0
usbcore 118980 3 uhci_hcd
snd_ens1371 24932 0
snd_rawmidi 25124 1 snd_ens1371
snd_seq_device 8200 1 snd_rawmidi
snd_pcm 98728 1 snd_ens1371
snd_page_alloc 11752 1 snd_pcm
snd_timer 25732 1 snd_pcm
snd_ac97_codec 69988 1 snd_ens1371
snd 57156 6
snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec
soundcore 10272 2 es1371,snd
gameport 4704 2 es1371,snd_ens1371
3c59x 39368 0
agpgart 34664 1 via_agp
tsdev 7392 0
dm_mod 59804 0
mousedev 10476 0
evdev 9600 0
capability 4520 0
commoncap 7232 1 capability
psmouse 20360 0
ide_cd 42656 0
cdrom 40732 1 ide_cd
genrtc 9588 0
ext2 71912 1
ext3 127240 0
jbd 62616 1 ext3
mbcache 9348 2 ext2,ext3
ide_generic 1408 0
via82cxxx 14332 1
ide_disk 19296 4
ide_core 139940 5
ide_floppy,ide_cd,ide_generic,via82cxxx,ide_disk
unix 28756 14
font 8320 0
vesafb 6656 0
cfbcopyarea 3872 1 vesafb
cfbimgblt 3040 1 vesafb
cfbfillrect 3776 1 vesafb
Module Size Used by Not tainted
nls_cp437 4348 2 (autoclean)
vfat 10540 1 (autoclean)
fat 31960 0 (autoclean) [vfat]
usb-uhci 23344 0 (unused)
usbcore 62924 1 [usb-uhci]
es1371 26444 0 (unused)
ac97_codec 13300 0 [es1371]
soundcore 3940 4 [es1371]
gameport 1676 0 [es1371]
ide-scsi 10032 0
scsi_mod 95108 1 [ide-scsi]
3c59x 27152 1
agpgart 46244 0 (unused)
dm-mod 46808 0 (unused)
ide-cd 31296 0
cdrom 29828 0 [ide-cd]
rtc 6440 0 (autoclean)
ext2 49548 1 (autoclean)
ext3 81068 0 (autoclean)
jbd 42468 0 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 10824 1 (autoclean)
ide-disk 16800 3 (autoclean)
ide-core 108568 3 (autoclean) [ide-scsi ide-cd ide-detect
via82cxxx ide-disk]
unix 14960 8 (autoclean)
Linux version 2.4.27-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 10:34:09 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Kernel command line: BOOT_IMAGE=Linux ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 799.755 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1595.80 BogoMIPS
Memory: 511560k/524224k available (1197k kernel code, 12276k reserved, 452k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 799.7170 MHz.
..... host bus clock speed is 133.2860 MHz.
cpu: 0, clocks: 1332860, slice: 666430
CPU0<T0:1332848,T1:666416,D:2,S:666430,C:1332860>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4044 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
Freeing initrd memory: 4044k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: HDS728080PLAT20, ATA DISK drive
blk: queue e0829cc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0x04
ide1: Drive 1 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=10011/255/63,
UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
Journalled Block Device driver loaded
ext3: No journal on filesystem on ide0(3,3)
Adding Swap: 1044216k swap-space (priority -1)
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: dm-devel@redhat.com
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xe8000000
PCI: Found IRQ 11 for device 00:09.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:09.0: 3Com PCI 3c905C Tornado at 0xe800. Vers LK1.1.18-ac
00:50:da:40:66:5f, IRQ 11
product code 5957 rev 00.13 date 10-29-99
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 7809.
Enabling bus-master transmits and whole-frame receives.
00:09.0: scatter/gather enabled. h/w checksums enabled
SCSI subsystem driver Revision: 1.00
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IOMEGA Model: ZIP 250 Rev: 51.G
Type: Direct-Access ANSI SCSI revision: 00
es1371: version v0.32 time 10:50:24 Aug 17 2005
PCI: Found IRQ 5 for device 00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xec00 irq 5
es1371: features: joystick 0x0
ac97_codec: AC97 codec, id: TRA35 (TriTech TR A5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:51:33 Aug 17 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:07.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4e6/0x1010) is not claimed by any active
driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
Linux version 2.6.8-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 13:22:48 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: BOOT_IMAGE=LinuxOLD ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 799.845 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511328k/524224k available (1551k kernel code, 12132k reserved, 690k
data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1576.96 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 799.0594 MHz.
..... host bus clock speed is 133.0265 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 4556k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe60
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe88, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4556 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: HDS728080PLAT20, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63,
UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0x04
ide1: Drive 1 didn't accept speed setting. Oh, well.
ide1 at 0x170-0x177,0x376 on irq 15
ext3: No journal on filesystem on hda3
Adding 1044216k swap on /dev/hda2. Priority:-1 extents:1
Generic RTC Driver v1.07
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Linux agpgart interface v0.100 (c) Dave Jones
PCI: Found IRQ 11 for device 0000:00:09.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:09.0: 3Com PCI 3c905C Tornado at 0xe800. Vers LK1.1.19
PCI: Found IRQ 5 for device 0000:00:0b.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000e400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using address 2
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
es1371: version v0.32 time 13:45:31 Aug 16 2005
input: PC Speaker
inserting floppy driver for 2.6.8-2-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ide-floppy driver 0.99.newide
hdd: No disk in drive
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0300140(lo)
IPv6 over IPv4 tunneling driver
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
eth0: no IPv6 routers present
Reply to: