Bug#376912: linux-image-2.6.17-1-k7: SAA7146 fails with "has no release callback"
Package: linux-image-2.6.17-1-k7
Version: 2.6.17-2
Severity: normal
With linux-image-2.6.17-1-k7 the module SAA7146 cannot be loaded
or initialized, it fails with the following error message
during bootup:
--------------------------- cut-----------------------------------
stradis 0000:00:0b.0: 0: SDM2xx found
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193
videodev: "SAA7146A" has no release callback. Please fix your driver for
proper
sysfs support, see http://lwn.net/Articles/36850/
i2c setup read timeout
i2c read timeout
i2c setup read timeout
i2c read timeout
i2c setup read timeout
i2c read timeout
....
i2c setup read timeout
i2c read timeout
saa7146: register extension 'budget_av'.
....
--------------------------- cut-----------------------------------
With linux-image-2.6.15-1-k7 it looks like this (where it is
working like expected):
--------------------------- cut-----------------------------------
....
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 209
saa7146: found saa7146 @ mem f8d6ee00 (revision 1, irq 209)
(0x153b,0x1157).
DVB: registering new adapter (Terratec Cinergy 1200 DVB-T).
adapter failed MAC signature check
encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
budget-av: ci interface initialised.
KNC1-0: MAC addr = 00:0a:ac:01:ac:0b
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
....
--------------------------- cut-----------------------------------
lspci shows the following output concerning the DVB-T adapter:
--------------------------- cut-----------------------------------
00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: TERRATEC Electronic GmbH Unknown device 1157
Flags: bus master, medium devsel, latency 32, IRQ 193
Memory at dfffde00 (32-bit, non-prefetchable)
[size=512]
--------------------------- cut-----------------------------------
Please let me know if you need further information.
Kind regards, Joerg.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages linux-image-2.6.17-1-k7 depends on:
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-15 Yet Another mkInitRD
Versions of packages linux-image-2.6.17-1-k7 recommends:
ii libc6-i686 2.3.6-15 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.17-1-k7/postinst/bootloader-error-2.6.17-1-k7:
linux-image-2.6.17-1-k7/prerm/removing-running-kernel-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/kimage-is-a-directory:
linux-image-2.6.17-1-k7/preinst/bootloader-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/old-dir-initrd-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/abort-overwrite-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/initrd-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/failed-to-move-modules-2.6.17-1-k7:
linux-image-2.6.17-1-k7/postinst/depmod-error-initrd-2.6.17-1-k7: false
linux-image-2.6.17-1-k7/postinst/old-initrd-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/create-kimage-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/already-running-this-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.17-1-k7/preinst/elilo-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/overwriting-modules-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/old-system-map-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/abort-install-2.6.17-1-k7:
linux-image-2.6.17-1-k7/prerm/would-invalidate-boot-loader-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/bootloader-test-error-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/lilo-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/depmod-error-2.6.17-1-k7: false
Reply to: