Re: R: Collegare due pc con cavo ethernet incrociato
Piergiuseppe Tundo <peppe.tundo@gmail.com> writes:
> # ifconfig
> eth0 Link encap:UNSPEC HWaddr 00-03-0D-53-25-5C-86-16-00-00-00-00-00-00-00-00
Quell'UNSPEC è quantomeno sospetto... posta l'output di "dmesg!grep -i eth" su
questo host... probabilmente il nome dell'interfaccia al quale hai
collegato fisicamente il cavo non è eth0.
$ dmesg | grep -i eth
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 201, 00:03:0d:33:02:17.
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
eth1: Media Link On 100mbps full-duplex
eth1: no IPv6 routers present
eth1: Media Link On 100mbps full-duplex
eth1: no IPv6 routers present
eth1: Media Link On 100mbps full-duplex
eth1: no IPv6 routers present
eth1: Media Link Off
eth1: Media Link On 100mbps full-duplex
eth1: Media Link Off
eth1: Media Link On 100mbps full-duplex
eth1: Media Link On 100mbps full-duplex
eth1: no IPv6 routers present
eth1: Media Link Off
eth1: Media Link On 100mbps full-duplex
Sì, credo proprio tu abbia ragione, e infatti avevo provveduto a dare `ifdown
eth0', quindi a cambiare eth0 con eth1 nel file /etc/network/interfaces e poi a
dare ` /etc/init.d/networking start'.
Ero anche riuscito per un momento a inviare, con rsync, una directory dal pc B
al pc A, dopo aver dato la password richiesta.
Solo che ora, dal pc B mi torna a dire che il Network è unreachable. Non so
proprio che fare. Possibile che non si riesca a fare 'sta cosa? Forse è
guasto il cavo o la porta? Anche con `ping' mi dice Network unreachable.
Grazie
Rodolfo
Reply to: