vedo il contenuto di un dvd+r, ma non riesco a copiarlo
Ciao a tutti, è la prima volta che posto spero di non sbagliare.
ecco velocemente il mio problema:
Ho appena acquistato un masterizzatore DVD interno Philips DVD-/+R e l'ho messo come master del canale secendario.
Ho la Sarge con kernel 2.6.
Ho masterizzato con K3b un dvd-r e tutto ok
Poi ho provato un dvd+r e la masterizzazione è andata a buon fine
infatti se leggo il contenuto del dvd (anche dopo reboot), riesco a
vedere tutti i file che ho masterizzato
Il problema è che non riesco ad accedervi, ne lanciarli, ne copiarli, insomma ho un dvd inutile!
Ho provato anche come root ma nulla...
in fstab ho messo:
/dev/hdc
/dvd
auto ro,noauto,user
0 0
(ho provato anche altre soluzioni "default", "iso9660"...)
Quando lo monto nessun problema vedo tutto, ma se provo a fare cp mi dà:
cp: lettura di `file': Input/output error
dove "file" è il nome del file che ho cercato di copiare.
Inoltre in /var/log/messages mi spara un bel po' di righe del tipo:
Dec 11 23:18:05 TuxOne kernel: ide: failed opcode was: unknown
Dec 11 23:18:05 TuxOne kernel: hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Spero mi sappiate dare una mano perchè non ci capisco molto!
Grazie!
PS: vi posto la parte di messages interessata:
Dec 11 20:51:13 TuxOne kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Dec 11 20:51:13 TuxOne kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
Dec 11 20:51:13 TuxOne kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
Dec 11 20:51:13 TuxOne kernel: hda: IBM-DTLA-307030, ATA DISK drive
Dec 11 20:51:13 TuxOne kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 11 20:51:13 TuxOne kernel: hdc: PHILIPS DVDR1648P1, ATAPI CD/DVD-ROM drive
Dec 11 20:51:13 TuxOne kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 11 20:51:13 TuxOne kernel: hda: max request size: 128KiB
Dec 11 20:51:13 TuxOne kernel: hda: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100)
Dec 11 20:51:13 TuxOne kernel: hda: cache flushes not supported
Dec 11 20:51:13 TuxOne kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Dec 11 20:51:13 TuxOne kernel: hdc: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Dec 11 20:51:13 TuxOne kernel: Uniform CD-ROM driver Revision: 3.20
.............
altro
.............
.............
da qui inizia la richiesta di cp
.............
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
Dec 11 23:15:04 TuxOne kernel: ide: failed opcode was: unknown
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
Dec 11 23:15:04 TuxOne kernel: ide: failed opcode was: unknown
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
Dec 11 23:15:04 TuxOne kernel: ide: failed opcode was: unknown
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
Dec 11 23:15:04 TuxOne kernel: hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
Dec 11 23:15:04 TuxOne kernel: ide: failed opcode was: unknown
Dec 11 23:15:04 TuxOne kernel: hdc: DMA disabled
Dec 11 23:15:04 TuxOne kernel: hdc: ATAPI reset complete
Dec 11 23:16:30 TuxOne kernel: hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
.............
continua così per un bel po'!!
.............
Reply to: