Montare penna usb da 1 Gb
Salve a tutti, ho provato a montare una pendrive Kingstom da 1Gb
e si ottengono i seguenti messaggi di errore:
debian:/# dmesg
.......
usb 3-4: new high speed USB device using ehci_hcd and address 4
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.04
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 2007040 512-byte hdwr sectors (1028 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 2007040 512-byte hdwr sectors (1028 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: [CUMANA/ADFS] p1<5>Attached scsi
removable disk sda at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
Buffer I/O error on device sda1, logical block 508378384
Buffer I/O error on device sda1, logical block 508378384
Buffer I/O error on device sda1, logical block 508378381
Buffer I/O error on device sda1, logical block 508378381
se invece lancio:
debian:/# mount -t vfat /dev/sda1 /mnt/pendrive/
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
La penna sotto windows è riconosciuta al volo, cosa posso fare
per poter utilizzare questo utile supporto?
E' molto gradito qualche suggerimento........
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Hai dei virus sul tuo PC ma non sai come eliminarli? Allora impara subito come rimuovere ogni tipo di virus - clicca qui
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3211&d=2-8
Reply to: