usb-storage
Sul mio portatile non riesco a leggere la chiave USB che funziona pero'
con un computer desktop.
Sulle entrambe le macchine è installata la Debian 3.1 con kernel
2.4.18-bf2.4
Sul portatile dmesg fornisce:
debian:~# dmesg
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f740000 (usable)
BIOS-e820: 000000000f740000 - 000000000f750000 (ACPI data)
BIOS-e820: 000000000f750000 - 000000000f800000 (ACPI NVS)
On node 0 totalpages: 63296
zone(0): 4096 pages.
zone(1): 59200 pages.
zone(2): 0 pages.
Found and enabled local APIC!
Kernel command line: noinitrd root=/dev/hda7 hdc=ide-scsi max_scsi_luns=1
BOOT_IMAGE=/install
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1400.074 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 245884k/253184k available (1783k kernel code, 6912k reserved, 549k
data, 280k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: a7e9fbbf 00000000 00000000, vendor = 0
CPU: L2 cache: 8192K
CPU: L3 cache: 5632K
CPU: After vendor init, caps: a7e9fbbf 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1400.0774 MHz.
..... host bus clock speed is 100.0054 MHz.
cpu: 0, clocks: 1000054, slice: 500027
CPU0<T0:1000048,T1:500016,D:5,S:500027,C:1000054>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [8086/24cc] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24ca
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: chipset revision 3
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N040ATCS04-0, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001)
8139cp: pci dev 01:04.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.24
eth0: RealTek RTL8139 Fast Ethernet at 0xd001ac00, 00:0c:6e:e4:f2:52, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c13e7dc0
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 530104k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd480, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd880, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
Intel 810 + AC97 Audio, version 0.21, 10:28:09 Apr 14 2002
ohci1394: $Revision: 1.80 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff7ef000-ff7ef800] Max
Packet=[2048]
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability
41e1.irda_init()
IrDA: Registered device irda0
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: No IRQ known for interrupt pin A of device 01:03.0. Please try using
pci=biosirq.
PCI: No IRQ known for interrupt pin B of device 01:03.1. Please try using
pci=biosirq.
Ricoh RL5C476 rev a9 PCI-to-CardBus at slot 01:03, mem 0xff700000
host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat
32/176] [bus 2/5]
host opts [1]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat
168/176] [bus 6/9]
ISA irqs (default) = 7,9,10,11,12 polling interval = 1000 ms
irtty_net_open()
irlap_change_speed(), setting speed to 9600
lsmod:
debian:~# lsmod
Module Size Used by Not tainted
ds 6624 2
i82365 22384 2
pcmcia_core 41376 0 [ds i82365]
irtty 7424 2 (autoclean)
irda 138764 1 (autoclean) [irtty]
ohci1394 14912 0 (unused)
usbkbd 2848 0 (unused)
hid 18784 0 (unused)
evdev 4544 0 (unused)
cpuid 1184 0 (unused)
apm 9116 2
usb-storage 97120 0 (unused)
audio 38432 0 (unused)
soundcore 3204 0 [audio]
scanner 8480 0 (unused)
sg 24420 0 (unused)
ide-scsi 7456 0
ieee1394 23496 0 [ohci1394]
keybdev 1664 0 (unused)
input 3040 0 [usbkbd hid evdev keybdev]
usb-uhci 20676 0 (unused)
usbcore 48000 1 [usbkbd hid usb-storage audio scanner
usb-uhci]
mount:
debian:~# mount -t vfat /dev/sda1 /mnt/usbst
mount: /dev/sda1 is not a valid block device
Il portatile e' un Asus M2N con tecnologia Centrino
La chiave e' SanDisk Cruzer mini 256M
Chiedo: e' usb-storage che non fa il suo lavoro all'avvio oppure
sto commettendo degli errori di configurazione o cos'altro?
Ho consultato diverse liste e siti Internet ma questo caso specifico non
sono riuscito a trovarlo. Del resto sono un newbie.
Grazie in anticipo per l'aiuto. Saluti.
Reply to: