Il martedì, 18 marzo, 2003 at 12:22:09 +0100, Riccardo Colonna Scrisse: > > > Cari amici il problema questa volta riguarda il > > > server X che proprio non vuole andare, di > > seguito vi > > > allego il log con la speranza che possiate darmi > > > qualche indicazione. > > > > > > - il monitor è AOC Spectrum 5Elr 15'' > > > - la scheda grafica Matrox Mystique 4Mb > > > - mouse Logitech Pulot Wheel > > > - tastiera 102 tasti > > > > > Io uso la Woody > > > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) > generated by dexconf, the > # Debian X Configuration tool, using values from the > debconf database. > # > # Edit this file with caution, and see the > XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by > dexconf, only make changes > # before the "### BEGIN DEBCONF SECTION" line above, > and/or after the > # "### END DEBCONF SECTION" line below. > # > # To change things within the debconf section, run the > command: > # dpkg-reconfigure xserver-xfree86 > # as root. Also see "How do I add custom sections to > a dexconf-generated > # XF86Config or XF86Config-4 file?" in > /usr/share/doc/xfree86-common/FAQ.gz. > > Section "Files" > FontPath "unix/:7100" > # local font server > # if the local font server has problems, we > can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > # FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath > "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath > "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" questi due li puoi tranquillamente eliminare > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" e pure questo: pex5 e xie oramai sono obsoleti e spesso non vengono nemmeno compilati nel pacchetto: nelle nuove versioni non sono più usati > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc102" > Option "XkbLayout" "it" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/ttyS0" > Option "Protocol" "Logitech" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection Questa parte non serve a niente: la puoi cancellare se hai un solo dispositivo di puntamento > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" > "/dev/input/mice" > Option "Protocol" > "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Matrox Mystique" > Driver "mga" > BusID "PCI:0:12:0" > VideoRam 4096 > Option "UseFBDev" "true" > EndSection Io proverei a non indirizzare la periferica (BusID) e a lasciare che sia Xfree a trovarla, così come la ram (VideoRam) e a disabilitare il framebuffer (UseFBDev) > > Section "Monitor" > Identifier "AOC" > HorizSync 28-38 > VertRefresh 43-72 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Matrox Mystique" > Monitor "AOC" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" > "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" Se togli le definizioni del "generic mouse", questa toglila > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > ### END DEBCONF SECTION > Questa non me la ricordo, scusa, ma nella versione di xfree che ho io esiste il comodo xf86cfg per configurare Xfree86, si può usare anche in versione per consolle con l'opzione -textmode (si basa sulle ncurses) Prova queste modifiche, se vedi che non và prova con xf86cfg o xf86config (e solo testuale, ma la sua potenza non ha paragoni secondo me) altrimenti richiama :))) Ah, dimenticavo: all'inizio non usare DRI o altre chicche, fai prima funzionare il server X, dopo provi ad abilitarle: spesso sono causa di mancati o strani avvii che allungano la risoluzione dei problemi. -- Ciao Umberto #------------------------------------------------------------------------# | Umberto Genovese E-mail: <umbegen@tin.it> | |PGP fingerprint = 526A B526 2BF4 E3FF 6200 30B4 AD2C D110 D0F3 66E4 | | <GNU & Linux: the dynamic duo> | #------------------------------------------------------------------------#
Attachment:
pgpTkU8cKuX6j.pgp
Description: PGP signature