Kernel > 2.6.12-1 crash
I have a Visualize C200 running Debian. It whas working fine with Kernel
2.6.12-1.
After an "apt-get dist-upgrade" the machine stops booting when trying to
mount root fs. Duyring update i get this:
Preparing to replace udev 0.089-1 (using .../archives/udev_0.093-1_hppa.deb)
...
****************************************************************************
*
This version of udev requires a kernel >= 2.6.15, upgrade aborted.
You can upgrade the kernel at the same time by creating the file
/etc/udev/kernel-upgrade and then trying again, e.g.:
# touch /etc/udev/kernel-upgrade
# apt-get install udev initramfs-tools linux-image-2.6-k7-smp
After upgrading udev this way you should reboot as soon as possible.
If you will reboot before the new kernel will have been properly
installed then udev will not be started, possibly breaking the system
or even making it unbootable!
****************************************************************************
*
dpkg: error processing /var/cache/apt/archives/udev_0.093-1_hppa.deb
(--unpack):
subprocess pre-installation script returned error exit status 1
I have restarted the machine interacting with boot and loading old 2.6.12-1
kernel.
I have modified the symlink "vmlinux" and "initrd.img" to point to the
2.6-12 files and system boot fine.
I have folowed the instructions in the udev error message with same result.
I have also read a thread in this list about loading modules in the
"busibox" shell, but i can only modprobe the scsi modules and /dev is empty,
so boot cant continue.
I have also tryed to rebuild the initrd.img with "dpkg-reconfigure
linux-image-2.6.15-1-parisc". The initrd.img created has the today date, but
still same error.
I need to update to use MPPE encription, available only in 2.6.15 kernels.
Here is the console log:
Firmware Version 5.2
Duplex Console IO Dependent Code (IODC) revision 1
----------------------------------------------------------------------------
--
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
----------------------------------------------------------------------------
--
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- -----------------
-------------
0 200 MHz Active Functional 512 KB/1
MB
Central Bus Speed (in MHz) : 120
Available memory (bytes) : 134217728
Good memory required (bytes): 0 (Not Set by OS)
Primary boot path: SESCSI.5.0
Alternate boot path: FWSCSI.0.0
Console path: PCI3.0.0
Keyboard path: PS2
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Searching for device(s) with bootable media...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Attempting to boot Primary Path...
Attempted boot failed, continuing search
Attempting to boot Alternate Path...
BOOTABLE DEVICE FOUND:
Path Number Device Path Device Type and Utilities
----------- ----------------- -------------------------
P0 FWSCSI.0.0 SEAGATE ST318437LW
IPL
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.8 root@c3k Mon May 23 11:07:29 MDT 2005
Skipping extended partition 6 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 1 31 f0 Palo
2 32 156 83 ext2
5 157 17194 83 ext2
PALO(F0) partition contains:
0/vmlinux32 4468853 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_k'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2244764 mediaptr 0x1000
Segment 1 load 00325000 size 472540 mediaptr 0x226000
Segment 2 load 0039c000 size 372869 mediaptr 0x29a000
Loading ramdisk 5076699 bytes @ 07b17000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.15-1-parisc (Debian 2.6.15-8) (waldi@debian.org) (gcc
version6
FP[0] enabled: Rev 0 Model 14
The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 000059d0 00000481 00000000 00000002 77864c0d 100000f0 00000008
000000b2 02
vers 00000501
CPUID vers 14 rev 23 (0x000001d7)
capabilities 0x2
model 9000/782/C200+
Total Memory: 128 MB
initrd: 17b17000-17fee6db
initrd: reserving 07b17000-07fee6db (mem_max 08000000)
LED display at f0190001 registered
Built 1 zonelists
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernelx
PID hash table entries: 1024 (order: 10, 16384 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 131072k available
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs... it is
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
BUG: soft lockup detected on CPU#0!
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001111 Not tainted
r00-03 00000000 10216800 1010fe00 f1001000
r04-07 103fce88 fffffffc 103fc810 00000020
r08-11 1053428c 10534288 4a5e8e00 3b9aca00
r12-15 00000000 000ffff8 000000fd f0100000
r16-19 f000167c f00001f8 f00001f0 00000000
r20-23 00000000 00000000 103fcea8 00000000
r24-27 105342ac 00000000 00000020 10349010
r28-31 1053428c 103fcea8 10534380 105342ac
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
VZOUICununcqcqcqcqcqcrmunTDVZOUI
FPSR: 00000100000011100000000000000000
FPER1: 24850e03
fr00-03 0000000000000000 0000001f00000000 0000001f00000000 0000000000000000
fr04-07 0000000000000000 5555555555555555 5555555555555555 5555555555555555
fr08-11 5555555555555555 5555555555555555 5555555555555555 5555555555555555
fr12-15 5555555555555555 5555555555555555 5555555555555555 5555555555555555
fr16-19 5555555555555555 5555555555555555 5555555555555555 5555555555555555
fr20-23 5555555555555555 5555555555555555 5555555555555555 5555555555555555
fr24-27 5555555555555555 5555555555555555 5555555555555555 5555555555555555
fr28-31 5555555555555555 5555555555555555 5555555555555555 5555555555555555
IASQ: 00000000 00000000 IAOQ: 1010fe04 1010fe08
IIR: 0805025c ISR: fff8a000 IOR: 17b0f2a0
CPU: 0 CR30: 10534000 CR31: 103a0000
ORIG_R28: 00000007
IAOQ[0]: pdc_iodc_read+0x8c/0xb0
IAOQ[1]: pdc_iodc_read+0x90/0xb0
RP(r2): pdc_iodc_read+0x88/0xb0
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b }
2. Dino PCI Bridge at 0xf2000000 [8/0] { 13, 0x3, 0x680, 0x0000a },
additional
3. Raven U/L2 Dino RS-232 at 0xf2003000 [8/0/63] { 10, 0x0, 0x006, 0x0008c }
4. Raven+ w SE FWSCSI Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x056, 0x00081
},
5. Raven+ w SE FWSCSI Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x056,
0x00}
6. Raven+ w SE FWSCSI Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x056,
0x0008}
7. Raven+ w SE FWSCSI Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0,
0x056,
8. Raven+ w SE FWSCSI Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x056,
0x000}
9. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0,
0x056, 0}
10. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0,
0x056, }
11. U2-IOA BC GSC+ Port at 0xf203f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
12. Raven U/L2 Dino PS/2 Port at 0xf2001000 [8/1] { 10, 0x0, 0x006, 0x00096
}
13. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b }
14. U2-IOA BC GSC+ Port at 0xf103f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
15. Cujo PCI Bridge at 0xf1000000 [10/0] { 13, 0x1, 0x682, 0x0000a }
16. Dino RS-232 at 0xf1003000 [10/3] { 10, 0x0, 0x007, 0x0008c }
17. Raven U 200 (9000/780/C200) at 0xfffa0000 [32] { 0, 0x0, 0x59d, 0x00004
}
18. Memory at 0xfffb1000 [49] { 1, 0x0, 0x05d, 0x00009 }
CPU(s): 1 x PA8200 (PCX-U+) at 200.000000 MHz
Setting cache flush threshold to 6e0 (1 CPUs online)
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
Dino version 3.1 found at 0xf2000000
Cujo version 2.0 found at 0xf1000000
Enabling Cujo 2.0 bug workaround
Cujo: No PCI devices enabled.
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
unwind_init: start = 0x10326a70, end = 0x10348290, entries = 8578
audit: initializing netlink socket (disabled)
audit(534855491.400:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PDC Stable Storage facility v0.10
Soft power switch enabled, polling @ 0xf0140000.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
serio: GSC PS/2 keyboard port at 0xffd08000 irq 20 @ 8:16:7
serio: GSC PS/2 mouse port at 0xffd08100 irq 20 @ 8:16:8
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16) is a 16550A
8:0:63: ttyS1 at MMIO 0xf2003800 (irq = 21) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 320k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
\ (xx)\_______
(__)\ )\/\
U ||----w |
|| ||
udevd (pid 772): Breakpoint (code 0)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 00000000 1010a000 1010e114 00010004
r04-07 40359814 0002d648 01000000 00000019
r08-11 00000001 00000000 000b6884 000951fd
r12-15 00000000 00000000 00000000 1013a7a0
r16-19 103f8000 103f8000 00000002 00000000
r20-23 0000010d 00000000 00000000 00000004
r24-27 00000008 00000000 fb179608 10349010
r28-31 0000010d 00000372 16d280c0 402217af
sr0-3 00000173 00000173 00000000 00000173
sr4-7 00000000 00000000 00000000 00000000
VZOUICununcqcqcqcqcqcrmunTDVZOUI
FPSR: 00000000000000000000000000000000
FPER1: 00000000
fr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
fr04-07 17ff2a4c00000020 16ca5540101642bc 1035b55800000000 103652f41013c708
fr08-11 0000000300000000 16ca554000000002 17b12e4800000000 17b01aa800000000
fr12-15 00000002103f5ed4 0002d8b6101650b0 1036b2dc00000000 0000000000001000
fr16-19 000000021040006f 0000000b00000000 3b9aca004a5e8e00 0098963a103591e0
fr20-23 17b0e00000000000 0000000010165054 fb17960800000330 0000000155555555
fr24-27 0000033017b0e000 0000000000000000 fffffc1816ca5540 00000400103f8010
fr28-31 0000000100000000 103f5e781017866c 000000001013d838 000000001013a7a0
IASQ: 00000000 00000000 IAOQ: 00000000 00000004
IIR: 00000000 ISR: 1024001b IOR: 4a128088
CPU: 0 CR30: 16d28000 CR31: 103a0000
ORIG_R28: 00000000
IAOQ[0]: _stext+0xeff00000/0x180
IAOQ[1]: 0x4
RP(r2): syscall_exit+0x0/0x14
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Done.
Begin: Waiting for root file system... ...
Done.
ALERT! /dev/sda5 does not exist. Dropping to a shell!
BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
/ #
==========================================
Alvaro Consuegra - Zaragoza (Spain [EU])
Consultor T.I. MCSE
email: alvaro@acopen.com
==========================================
Reply to: